Fedora :: 10 - Ran Update - Can No Longer Use Nivida Drivers ?

Aug 6, 2009

I ran an update yesterday ( like i do most days ) and now my dual screen doesnt work and when i load the nvidia conrol panel it says to run a command as root ( summat liek nivida-xorg ) it then does something tomy xorg that then completely breaks it.

I havent made any changes other than the update.

How do i get nvidia installed properly again?

Im currently running on a strange screen with 2 black lines on the sides and a bad res.

I fear its borked it royally?

View 4 Replies


ADVERTISEMENT

Fedora Installation :: F13 LiveCD No Video /nivida

May 25, 2010

When I tried to boot the LiveCD (x86_64) with my Nvidia GeForce 8500GT, the display goes blank. I can hear the CD drive working, but nothing is displayed.

View 9 Replies View Related

Fedora :: After Last Update Nvidia Drivers Crashed

Mar 13, 2009

I updated fedora 10 a few days ago, by blindly installing every update available, and when i restarted, my nvidia drivers weren't loading, and I'm having an issue I had before, where the signal being sent to the monitor is out of frequency range. Basically when fedora tries to load its GUI, my monitor just goes blank. Before I could only fix it by plugging in a different (less tempermental) monitor, and messing around with the display driver.

I was wondering if there is a way to mess with the drivers from the command line. I really don't like switching out monitors, and i want to learn the skillz and such.

View 4 Replies View Related

Fedora :: NVidia Drivers And Kernel Update

Jun 17, 2011

I updated FC14 which included the kernel and also the nvidia drivers kmod. Then after a reboot the video driver wouldn't load. From another terminal I tried different things to fix it and didn't managed. I eventually erased all nvidia drivers so that I can get the default one. Now every time it boots I get a really low light. I can login, but can't see. It seems that the whole screens has about 5% light and I can't see to do anything. I managed now to boot into FC live CD for FC15 and I have light. For FC14 live CD it's the same no light problem.

I tried all older kernels to boot but I have the same problem. I am using PAE kernel and that's why I installed the kmod drivers. But now, since they are not anymore and I can't see anything, even though I am logged in I don't know what to do next. Is there something I can do from FC15 live cd? How can I go using the terminal to my harddisk and how to add the driver or any low graphic driver so that I can have light? After I did yum erase *nvidia* the light went almost off.

View 2 Replies View Related

Ubuntu Networking :: Update Drivers In 10.10 - Fedora 14 Using Same Version?

Dec 11, 2010

I've got an Atheros AR5001 Wireless Network Adapter and it works perfectly in Ubuntu 9.04 to 10.04, but when I upgraded to Ubuntu 10.10 I had to restart my computer several times before the wireless card would start and I would be able to connect to any networks? I then changed to Fedora 14 and the problem was also present so I assumed the problem was my wireless card and not the operating system. However I recently wondered if it was the OS again and went back to 10.04 and my wireless card works flawlessly again. So I'm wondering if there was an update to the drivers in Ubuntu 10.10, and I assume Fedora 14 using the same version? How would I be able to see if they did change? And how would I be able to use the version of the drivers in Ubuntu 10.04 in 10.10 if it is the drivers what changed?

View 1 Replies View Related

Ubuntu :: Can't Install Nivida Grafics Driver &amp - Flash-player?

Jun 22, 2010

Having tried many diffident approaches to the download and install nivida grafics drivers and flash-players I give up :P I searched through the forum and nothing seemed to work So I have deleted all of the failed downloads.

View 2 Replies View Related

Ubuntu :: Linuxant Drivers Will No Longer Install?

Apr 30, 2011

I am trying to install the Linuxant ALSA driver on 11.04 from [URL]

From the error log:

Code:
287 /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function 'snd_pcm_hw_params':
288 /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: implicit declaration of function 'pm_qos_remove_requirement'

[Code]....

This worked fine on Ubuntu 10.04 (didn't try 10.10). Any way to work around this? Not having sound means Natty is kind of useless =/

View 4 Replies View Related

Fedora Networking :: Wireless Broadcomm Drivers Broken After Update

Feb 16, 2011

I just rebooted my netbook after updates this last week and notices the wireless is broken now. The updates updated my kernel and wl modules. I'm using a broadcom 43224 driver.If i reboot to the older kernel the wireless works.

View 5 Replies View Related

Fedora :: Video And WiFi Drivers Wont Work After Update?

Jun 16, 2010

that my video and wifi driver dont work after my last update..Update:Quote:

#
Jun 16 00:29:25 Updated: libudev-151-10.fc13.x86_64
Jun 16 00:29:27 Updated: libgudev1-151-10.fc13.x86_64

[code]...

View 14 Replies View Related

OpenSUSE Install :: Can No Longer Boot Into 11.4 After Updating NVIDIA Drivers

Apr 24, 2011

Basically everything was going fine, and i was enjoying the OpenSuse experience, then downloaded djl (Games Launcher) , installed some games and found that i had a very very very bad frame rate (about 1FPS), and my GPU is a NVIDIA GTS250 (1GB), and runs most games flawlessly under m$, so i went about installing the graphics drivers for my card. I followed the instructions and was under the assumption that i installed the correct ones, but now i cannot boot into any graphical interface. I think that it should be a graphics issue, as this was one of the few things done before rebooting. I have tried booting into the normal mode, and the failsafe, I have read many other "Not booting'' posts, and have tried their solutions without success, there include: Changing the boot parameters Logging in and manually trying to boot up the gui (init 3.... init 5... etc)

When the computer tries to load up OpenSuse in normal mode, it comes up with the normal loading screen, and then about 90% of the way it stops for about 30 seconds, and then switches over to a CLI, asking for a login, going through the log a couple of things fail, did have these noted down (but cannot find and will post along with other commands that i am asked to do) I want to try and avoid a reinstall as it took me a long time to get the WiFi card working.

View 9 Replies View Related

Ubuntu :: 9.10 No Longer Boots After Activate The Proprietary Nvidia Drivers

Feb 4, 2010

I had, with much delight, accomplished a dual boot install of Ubuntu 9.1.0 and Windows 7 the other day and everything was working perfectly fine. However, I decided to activate the proprietary Nvidia drivers that were available in the drivers menu and my system subsequently no longer operates. After installing and rebooting Ubuntu will no longer work and becomes stuck on a black screen with two white dashes in the top right had of the screen.

This hang up occurs directly after the first white Ubuntu logo appears during the startup and the only key that will work during this screen are Crtl + Alt + F1, which only bring up a second black screen except with a solid white dash in the top right screen. At that point no key will work. I have tried to fix things in recovery mode and used envyng to remove the nvidia drivers as well as other operations, however the same result still appears when I try and run Ubuntu. I own a Sony Vaio Z690C if it makes any difference.

View 1 Replies View Related

Fedora Installation :: Update The New Nvidia Drivers Since Dont Seem To Work In The Newer Kernel?

Jul 7, 2011

I was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:

Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686

[Code]...

View 4 Replies View Related

Debian :: Scanner No Longer Recognized After Update

Nov 30, 2015

I am running Wheezy 7.9 32 bit, with the kernel Linux 3.2.0-4-686-pae, and Gnome 3.4.2 on an Intel Pentium CPU G3420 @ 3.2 GHz. I installed a new printer in August, an HP Officejet 7612 all-in-one printer/scanner/copier, and it worked perfectly as both a printer and a scanner first time, despite not being listed on the supported list in SANE. Two weeks ago, I got a general software update notification, and did the update. Now the scanner is not recognised. The printer still works fine as a printer, but when using Simple-scan, I get the error message "No scanners detected. Please check your scanner is connected and powered on". I have had a look round on Google, and all the suggestions made do not work.

I tried the suggestion to add myself to the scanner users list on my PC which made no difference (even though the scanner previously worked without my being added to the scanner users list).

I have deleted the printer and re-installed it using CUPS, but that still has no effect. I tried re-installing HPLIP also to no avail, and I have now lost the toolbox on the drop down menu under <Applications> <Accessories> <HP Toolbox>, as when I click on it, nothing happens.

It would seem that something in the update has messed up Simple-scan. Looking at the dpkg log (is this the right thing to look at?) for the date of the update, I cannot find anything which directly involved SANE, so I think that it might be something else which has affected SANE. How I can find out which update did the damage? I don't normally do anything except accept recommended updates, so I am a bit lost as to what to do.

View 2 Replies View Related

OpenSUSE :: Gnome No Longer Starts After Update?

Jan 21, 2011

since the last SuSE online update (last Wednesday?) the X server no longer starts on our notebook (ATI HD 4200) so we only have the consoles available, which limits the WAF heavily . We were using SuSE 11.3 with the Gnome desktop for about one months and it worked smoothly, but since the update (which included a kernel update to 2.6.34.7-0.7) the X server tries to start 5 times and then gives up. All logfiles end with:

Code:
...
[ 13.899] Segmentation fault at address 0x3c
[ 13.899]
Fatal server error:

[Code]....

I used the ati driver ati-fglrxG02-kmp-desktop, version 8.762_k2.6.34.0_12-31.1 from the ATI Suse repository. To solve the problem I already switched to the Xorg driver which lead to a color distorted display but no segmentation fault. But I'd like to get the ati driver running again.

View 9 Replies View Related

OpenSUSE Install :: LV's No Longer Accessible After Update From 11.3 To 11.4

Aug 26, 2011

after upgrading 11.3 to 11.4 with zypper dup my logical volumes are no longer accessible The YAST Partitioner recognize them as Linux Raid but I could not mount them.

linux-dv06:~ # blkid
/dev/sdb1: UUID="3ed0f7a9-8986-254c-a14d-c8941769f33a" UUID_SUB="b558e84e-6369-8803-f65f-455bd0e5f0f7" LABEL="linux-2zun:0" TYPE="linux_raid_member"
/dev/sda1: UUID="482595d1-cbf0-43fb-8026-1ed4d1229fbc" TYPE="ext4"
/dev/sda5: UUID="f30bb3a9-2690-403f-9f45-45c3379a512b" TYPE="ext4"

[Code]....

View 2 Replies View Related

Ubuntu Installation :: No Longer Login After Update?

Feb 28, 2011

I am having a problem with the latest update of lucid ubuntu. I was on 10.04 for the longest time but decided to update while I was out doing errands. When I got back the logon screen was made up of blue and gray windows on a completely black background and the mouse and keyboard wouldn't work!

I found that if I unplugged and then replugged my mouse that I could get it working, but not all the options work properly. When you try to close a menu it just stays up, but it isn't there at the same time. Also, the shutdown/restart options don't work along with the physical power button on my computer, I have to remove the battery and power cord to shut it down.

I am currently dual booting ubuntu and windows 7 on my gateway NV59 laptop.

View 9 Replies View Related

Ubuntu :: Use The Update Manager It Says That It Is No Longer Supported?

May 31, 2011

I have a pc at work with 9.04 on it and when I try to use the update manager it says that it is no longer supported. how do i upgrade to the newest version?

View 6 Replies View Related

Ubuntu :: Cdrom And Hd No Longer Recognized After Update In 10.04?

Jun 5, 2011

After running an update in my 10.04 installation, both cdrom drives are not recognized anymore and won't even open when i push the eject button. Also, a 2TB storage drive is not recognized any longer and the computer won't even boot if that drive is plugged in..

View 5 Replies View Related

CentOS 5 :: KMail And PGP No Longer Working After 5.3 Update?

May 3, 2009

Have a problem to decrypt emails after I updated to 5.3. Didn't change anything to the pgp or Kpgp settings and Kmail says that it failed decryption with openpgp. As I don't know what to look for or what to check I am lost.. it encrypts outgoing messages just fine.

View 1 Replies View Related

OpenSUSE :: Virtualbox No Longer Running Since NVidia-Update

Sep 11, 2011

Trying to start a running installation of virtualbox I get:

And it seems that it doesn't work with the new 275 build I got pushed when updating. Updating virtualbox didn't help. Besides uninstalling the 275 version of nvidia and installing the 270.

View 4 Replies View Related

Ubuntu :: Update Manager Error - Repository No Longer Available

Apr 24, 2010

I just did latest update and I get the following error message "The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct. Failed to fetch [URL] 404 Not Found. Some index files failed to download, they have been ignored, or old ones used instead."

View 8 Replies View Related

Ubuntu :: Update Info Outdated - Repo No Longer Available

Jul 9, 2010

I noticed a red triangle at the top right of my screen today and I've been trying to sort out the problem. is says "update information is outdated" I used the update like it suggested but get this error msg. I'm new to ubuntu/linux so explain in simple terms: "Could not download all repository indexes. The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct. [URL].. 404 Not Found Some index files failed to download, they have been ignored, or old ones used instead."

View 4 Replies View Related

Ubuntu Networking :: Wireless No Longer Autoconnects After Update?

Nov 18, 2010

10.04 was connecting to wireless on boot up without a problem.After updating, it can no longer do it. I have to click on the wireless icon (which has an exclamation mark through it) and connect to hidden. I can then choose my wireless profile and am asked for my elevated privileges password. Once supplied, the connection is made.I presume the encryption password is 'locked' now at boot.

View 2 Replies View Related

Ubuntu :: 10.10 - Update Info Outdated / Repo No Longer Available

Nov 24, 2010

I'm using 10.10 i386 on hp pavilion dv9620us. The top panel keeps showing a red triangular caution alert that when moused over reads: "The update information is outdated. This may be caused by network problems or by a repository that is no longer available. Please update manually by clicking on this icon and then selecting 'Check for Updates'and check if some of the repositories fail." I had clicked this button a few times. The first time it installed a kernel update. The next couple times I don't think it did anything but check for updates.

View 2 Replies View Related

Ubuntu Multimedia :: Sound Is No Longer Working After Update

Dec 5, 2010

I am running 10.10 on a 21.5 inch imac. I just ran some updates and rebooted, turned on rhythmbox to play some tunes and realized there is no sound. Tried ....., no yield. Tried a different user account still no sound. SO I rebooted into osx and I have sound. Its therefore a software issue for sure. I plugged in headphones and changed to the appropriate output in the settings manager, sound came out, but out of phase. What going on here? any ideas would be awesome.

View 4 Replies View Related

Ubuntu :: No Longer Able To Enable Desktop Effects After Update?

Dec 19, 2010

So I recently fresh installed Ubuntu 10.10, and after a few hiccups I got everything running fine, including the desktop effects with Compiz. So anyways, after a couple days of everything working fine, I ran an update, and rebooted. When Ubuntu booted back up and I logged in, all the effects were off. I opened up Compiz and all the boxes were unchecked.So I went to the appearance settings, tried to enable the "Extra" visual effects, and then the "Searching for drivers" box popped up. It ran for a little bit and then closed and said "desktop effects could not be enabled". So I checked the restricted drivers thing and the ATI proprietary driver is enabled and in use.

But whenever I try to enable the effects the screen just flickers, the window borders flicker for a second, and then the window pops up saying the desktop effects couldn't be enabled. The searching for drivers window only pops up like half the time.My video card is an ATI Radeon HD 3870, and I've tried reinstalling the drivers for it.Also, whenever I run compiz my window borders disappear entirely and don't pop up again until I try to enable desktop effects in the appearance settings. I've lurked the forums a bit, and I haven't been able to find anything that has fixed my problem.

View 2 Replies View Related

Ubuntu Installation :: Update Manager No Longer Working In 11.04?

May 11, 2011

I recently tried to add a repository by following the directions here: Banshee.fm/download and then select the ubuntu icon at the top. Here is the error I get when I try to run update manager: "Could not initialize the package information An unresolvable problem occurred while initializing the package information.

Please report this bug against the 'update-manager' package and include the following error message:'E:Type 'banshee-team/ppa/ubuntu' is not known on line 1 in source list /etc/apt/sources.list.d/banshee-team-ppa-natty.list'The command I entered was sudo add-apt-repository ppa:banshee-team/ppa. I have tried to remove all banshee related checks in software sources of the ubuntu software center. Then I just removed the lines all together. I still cannot open update manger. Get the same error. Anyone know of a fix?

View 6 Replies View Related

Ubuntu :: No Longer Send Link After The Update Of Firefox?

Apr 27, 2010

Immediately after the update of Firefox I can no longer send a link.Previous to the update, I would simply click file, then send link. Now nothing happens.My present version of Firefox is Namoroka

View 3 Replies View Related

Ubuntu Installation :: Grub Update - Can No Longer Boot Vista

Feb 27, 2010

I recently installed Ubuntu (Karmic Koala) on a Dell Inspiron 1525 which already had Vista installed on it. The installation went just fine and I could boot into either Ubuntu or Vista using the Grub bootloader options. After updating grub through the update manager however, I can no longer boot into Vista and get an error message that says:
"Windows cannot start. A recent upgrade or hardware change may have caused this".

And below that:
File: \boot\bcd
Status: 0xc000000e
info: An error occurred while attempting to read the boot configuration data"

When I run sudo fdisk -l, I get the following:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000080

Device Boot Start End Blocks Id System
/dev/sda1 1 6 48163+ de Dell Utility
/dev/sda2 * 7 13619 109345113+ 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13619 15936 18605117+ 7 HPFS/NTFS
/dev/sda4 15937 19457 28282432+ f W95 Ext'd (LBA)
/dev/sda5 19066 19457 3148708+ dd Unknown
/dev/sda6 15937 18930 24049242 83 Linux
/dev/sda7 18931 19065 1084356 82 Linux swap / Solaris

Partition table entries are not in disk order. I have the Vista recovery disk but was wondering whether using it to repair the Vista bootloader might mess up Grub.

View 4 Replies View Related

Ubuntu Networking :: Samba No Longer Working - Caused By Update?

Mar 3, 2010

I think an update or something has killed Samba on my Karmic box. it can see Windows shares OK, but it no longer appears on the Windows network.I have not changed my smb.conf for months, so something else has been modified.Looking in the logs I can see the following in "log.winbindd-idmap" after restarting Samba

Code:

[2010/03/03 10:07:20, 0] winbindd/idmap.c:201(smb_register_idmap_alloc)
idmap_alloc module tdb already registered!
[2010/03/03 10:07:20, 0] winbindd/idmap.c:149(smb_register_idmap)

[code]...

All other networking seems fine (internet, Synergy+ etc) it's just sharing out to the Windows network that is broken.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved