Ubuntu Networking :: Can't Download New Drivers With Non-working Wireless Drivers?
Jun 27, 2010
I've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
I've been trying to get online for the better part of a week now with no luck. I can't get my network up to download drivers for my hardware - without the drivers I have no GUI so I'm stuck trying to do this in text mode.
i have ubuntu 7.04 and i have wireless driverAtheros Hardware Access Layer (HAL)but i cant get it to work in restricted drivers it's checked as enabled but status is not in use how do i fix this
I need to download 'Windows Wireless Drivers' from the Ubuntu Software Centre but I cannot as I do not have an Ubuntu computer with an internet connection (hence the need for the application).
Would it be possible for someone to email it to me so I may put it onto a removable storage device and install it onto my Ubuntu computer?
If not; are there any alternative solutions (other than Madwifi).
I have ubuntu installed on my compter. My sisters friend installed it but when he did, he said that he had trouble getting it in. so now all i have on my comp is ubuntu (which it doesn't work properly) and my cd rom drive is not working at all, it's like I don't even have one because the drivers for it aren't installed. I have an Acer Aspire 1620 laptop, can anyone tell me how I can download the cd/dvd rom drivers for it and where I'm suppose to put them on ubuntu? and if anyone knows where I can download the drivers
When you download linux drivers for devices such as wireless dongles, you'll get a folder full of random files that I'm assuming oyu need to compile? How do you install a wireless driver in linux?
I installed Ubuntu 10.4 on my laptop compaq presario CQ50 I cannot go online, because the drivers does not exist ? where can I download them? the wireless flash blue by the way, and it was working before I switch to Linux is there anyway to find driver for my wireless compatible?
Just got a Lexmark Pro200 wireless printer. Can anybody tell me where and how to download the relevant drivers to print using WiFi?. Went to Lexmark.com and downloaded what i thought was the correct driver and the system installed them but cannot find them. When i plug in a usb cable a message tells me that i have connected the correct printer, However when asked to search Lexmark does not even show up on the list to select and search. Was successful on my wife's Windows laptop and after trial and error on my Mac Mini.
I am new to fedora linux. I want to know how to install wireless driver for my Dell Wireless Dell Wireless 1397 802.11b/g Half Mini Card. I am using fedora 13. Below is my lspci command outuput.
With nearly all Linux distributions (Ubuntu, Kubuntu, and Linux Mint being the exceptions), my system never seems to recognize that my laptop even has a wireless card attached to it. That is, when I run "lspci" the wireless card doesn't even show up on the list like it does with Ubuntu/Kubuntu/Mint. This narrows my options when it comes to choosing a distro to install on my computer. I can't seem to find instructions as to how I can make my wireless card work. I assume it needs a driver. I managed to find the driver, I think, in the form of a .tar.gz file. The card is a Realtek Semiconductor, RTL 8191SEvB Wireless Lan Controller (rev 10).
I just recently put Ubuntu 10.04 Lucid Lynx on my laptop with windows dual booting. I'm pretty new to all this stuff, so I'm a bit confused. I followed instructions I read on here, but none of it seems to be working. I put all of the 3 Ndiswrapper things on, and then copied the .inf and .sys files from windows into the same directory. I just want to connect to my home network, which has WEP security.
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly. 2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page. 3) From terminal I typed "cd Desktop" to change the directory to the desktop. 4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb" 5) This installed Windows Wireless Drivers gui successfully and I can access it. 6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed. 7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder. 9) Upon mousing over the network Icon naturally my hardware is still not present. 10) From what I gather after the system finds the hardware I am to write into the terminal
i installed ubuntu along side of xp, and i cannot get my wireless to work. the drivers that are installed in xp work great, and i can access the internet, but do not work in ubuntu.
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
I installed openSuSE 11.2 sometime ago in a COMPAQ Presario CQ60-419WM laptop (the ones that Wal-mart sold for $300 about a year-and-a-half ago. I installed the 64-bit version because I saw that the processor could support that (perhaps that was not a good idea). I have some problems that seem related to not having the necessary drivers. My wireless has never worked and my display is far from what I would like it to be (the response is slow, if a drag a window, its motion is jerky, if I scroll down in a browser window, the motion is wavy). The look and feel is very different from what I get at work and I do not know how to fix it.
I'm about to chuck my Ubuntu Dell Mini Laptop in the trash, have tried everything and read everything, but there seems no easy way to install the wireless drivers.
When using the b43-pci-bridge driver for my broadcom card I can't get the wireless to work while if I use the wl driver it does. This is the only problem that I have that I can't use the wl because it doesn't allow me to change the mode of the card to monitor where as the b43 is compatible with mode change as well as with aircrack.
This is what lspci -nnk shows: Code: 06:00.0 Network controller [0280]: Broadcom Corporation BCM43XG [14e4:4329] (rev 01) Kernel driver in use: b43-pci-bridge Kernel modules: ssb and neither network manager or iwconfig show blank while using the b43 driver but using the wl they do work....
I'm having a strange problem with my wireless card (I never had troubles with it so I'd be glad if you could help me in making it work again). I have installed the restricted STA driver for my Broadcom BCM4311 wireless card, and apparently the card is recognized, and in fact I can "see" the available wireless networks and connect to my one.
The strange things is that even if I connect to my network I can't navigate. If I link an ethernet cable, start navigating and after disconnect the ethernet and keep using only the wireless, I can navigate without problems.
I am using a thinkpad R61 and wireless is okay a livecd. Installed ubuntu 8.10 onto a 8Gb thumbdrive and the wireless is still working perfectly. Hoping to make this thumbdrive be truely portable to any laptop, I started download more wireless drivers (e.g. for rt2570, rt73, broadcom, atheros drivers etc) After installing all those wireless drivers, rebooted and noticed that ubuntu does not activate my wireless at all. (the wireless led on my thinkpad does not light up).
i have installed ndiswrapper, and the correct drivers for the wireless card.
Code: ndiswrapper -l: bcmwl5a : driver installed device (14E4:4320) present I seemed to be having a conflict with the generic drivers which loaded for my wifi device 'b43-pci-bridge' and the ndiswrapper drivers i installed.
So i ran the command 'rmmod ssb' and now my broadcomm wireless device is "unclaimed"
Just upgraded to Lucid from Karmic. First thing I notice after restart is that I have no wireless. No big deal, I probably just need to re-install the proprietary drivers. I go to do this, and it gives me an error message, saying that the installation has failed. This has never happened before, and didn't happen when I upgraded from Jaunty to Karmic. I have an HP dv6 1230us and a Broadcom STA card.
I really need the internet to be working, and didn't anticipate that an upgrade, of all things, would screw it up...
I have just completed a clean install of 10.04 and my wireless is not working.It detected my hardware and installed the drivers. It is activated in the hardware Drivers section and the wireless button light is lit.When I click the connection icon in the panel the wireless has nothing to connect too and says disconnected. The Ethernet connection is working fine.BTW the wireless worked just fine in 9.10.
No wireless networks can be recognized in Ubuntu, and now after several attempted fixes, my wireless toggle button won't switch from orange to blue. My wireless card is Atheros AR5001. I posted in the absolute beginners forum, but I've played around so much that I think I can move on to this one I'm so sorry if posting another thread is bad etiquette, but I need to have wireless access by Friday morning, and am slightly desperate.
Attempted fixes: First, I installed the backport modules using Synaptic. Then, I installed the madwifi driver. After those failed, I used ndiswrapper to install the Windows driver (linked from the ndiswrapper page). I made sure to disable the madwifi driver and restart first. My output all looks normal--I blacklisted everything mentioned in google searches. Here is the current output of ndiswrapper -l:
Code: ndiswrapper -l WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in
I cannot get my Sabrent USB wireless adapter to work, please help me as I am a beginner in Linux! In their readme, they have two methods:
1.) Compiling a driver from the source code, but they do not give any instructions and I am lost on how to do that.
2.) Copying the firmware files directly to the lib/firmware folders. I did that but when I ran sudo ./wlan0up and sudo .wlan0down, but everything I do results in a "Could not get interface for wlan0"
I installed Maverick earlier today on a Dell XPS M1210, and everything works beautifully, except for one thing: the wireless card. It is an Intel 3945ABG wireless card, and I've tried searching around and have found nothing,
I just re-installed Ubuntu 10.04 and was trying to install the Broadcom STA wireless driver. It worked for me before with no problems, but now when I try to install any proprietary driver (using System >>Administration >>Hardware Drivers) I get an error message that says: "You are not authorized to perform this action". I am the only user and I have administrator privileges, so I do not know why I am getting this.
I am looking to reinstall Ubuntu on my desktop computer, in a dual-boot configuration. The system I am installing to should prove no hassle, but my biggest concern is my wireless card. It's a D-Link DWA-510 wireless card. Checking the D-Link website, they do not seem to have Linux-specific drivers available for that model, so I am wondering if there are compatible drivers available in Ubuntu?
I just recently purchased a Lenovo Thinkpad e520 and I'm wanting to put Ubuntu 11.04 on it. I downloaded the 64bit iso and burned it to a thumb-drive, just before booting the thumb-drive. I have not yet installed Ubuntu, but rather I'm still running it from a thumb-drive. I want to make sure everything will work fine, before installing it permanently.
However, it doesn't appear as if any drivers for my wireless card were loaded, as I can't view the available wireless networks. I successfully installed Ubuntu 11.04 on my desktop several months ago and I haven't booted into Windows since, -not one time. Therefore, I'm hoping to have my new laptop run Ubuntu as well.
