I use TinyChat a lot, and for whatever reason, the space-bar will scroll down the page and then I have to scroll up every time when I'm inside flash trying to type. Is there any way to completely disable the space scrolling so that I wont have to worry about it. I never used it to begin with, so it doesn't matter to me.
View 1 RepliesFIRST thing i need to do is figure out why every webpage i open immediatly scrolls to the bottom. i can drag it up but it goes right back down. VERY frustrating . then i can be much more productive. just intalled Fedora 11(x86 64). no other OS. acer aspire desktop x1200. let me know what other info you need. if im not to dizzy ill try to provide it
View 7 Replies View Relatedseems to be working but the card is scrolling through channels while trying to attack a certain channel! how do i stop it?
View 1 Replies View RelatedI moved from a Linux environment from one company to another and one annoying difference came out:When I used to run an application in a terminal (no GUI), the transcript lines were presented one the window - when the window was full then the scrolling of the lines would continue only if one hit the space bar to proceed (of course waiting to user input did not stop the run).
In the new environment the behavior is different - transcript lines keep going on and on so I need to scroll up - and moreover each page-up command is cancelled by the new lines appearing.perhaps this is also reproduce with other Linux commands , say "find" or "ls".
I'm having a very faint but noticeable electric-like buzzing/grinding. It is not the hard drive but sounds very similar.
It occurs when i move scroll bars, or drag windows. It is highly replicable.
The only other time this has happens is when i install KDE which resulted in me reinstalling. Something id prefer to avoid. I haven't installed KDE this time, but this seems to have started immediately after replacing my fstab file which i accidentally deleted. That's the only thing i can think of.
I want to use TinyChat but I Can't because it doesn't work. How do I Get it to work?
View 4 Replies View RelatedI've just recently put Ubuntu on my 2010 Macbook Pro 13 inch, and all seems to be running more or less alright.One thing i miss from OS X is the ability to reverse the scrolling direction, also inertial scrolling.Is there any way to implement this in Ubuntu?Also, i have already installed the Mactel trackpad drivers.
View 2 Replies View RelatedI've tried my built in webcam with TinyChat and it wont work. It works on some other programs, but for some reason TinyChat can't find my webcam.
I have an HP Pavilion dv2000 and a built in webcam with it. I'm currently running Ubuntu v.10.4 LTS
I would like to know how I stop the current window I am on following me when I switch workspace.for example, I have this web browser open whilst I am typing this, I press Ctrl+. (my shortcut to take me to the workspace to the right), and instead of taking me to what was a nice empty workspace on the right, it sweeps this web browser to it as well.I can't find a way to configure this to my liking, can anyone help?
View 4 Replies View RelatedMy webcam does show up in wxcam bit it doesnt in tinychat...how do i fix?
View 2 Replies View RelatedLogical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
I have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
View 1 Replies View Relatedi used gddrescure to clone an 80gb harddrive and this is the result ROFL.i guess you can only do this making sure the target drive is the same size, you see i didnt know lol so..i now have THIS problem.can anyone tell me how to turn my unallocated space into a usable 'free' space? i could play with gparted right now but i dont wanna do anything wrong, so if theres anyone who can tell me how to do this.
View 1 Replies View Relatedi made space by shrinking my window partition and so i have unallocated and would like to add to sda2 to have more space. Check out this pic. How can i do this?
View 1 Replies View RelatedI installed Ubuntu 10.10 with wubi and i have been enjoying my Ubuntu experience a lot. I installed quite a bit of programs and spent a couple hours customizing my machine. The problem is im running out of disc space. Any ideas on how i can add more space. I have gparted but i dont know where to move the free space to because wubi installed it.
View 1 Replies View Relatedmy home partition is an extended one, and when i want to create an unallocated space the space will stay in that extended partition. but there is also an 7 gb unallocated space which i want to merge with the other unallocated space. I also cannot extend that partition over that 7 gb. how can i overcome that problem?
i m also uploading a screenshot of gparted.[URL]..
I am developing a I2C CDROM client driver. The CDROM firmware supports TOC information read through a I2C command. It sends the TOC information in burst ( Interrupts a GPIO pin when it is ready ) and my CPU does a I2C read to read the TOC. When the CDROM firmware finishes sending the last data burst , it informs my CPU that it is done with the TOC, by a flag in the last data burst. I would like to know, which is the most efficinet way I can send these TOC information to userspace?
View 4 Replies View RelatedI am writing device driver in which i have to call callback function from kernel space, which are saving my data. But the callback functions are in userspace. While accessing them i am getting segmentation fault.
View 1 Replies View RelatedI wanna write a file in kernel space but from my searching I can to know that instead of writeing file in kernel space ,I can write data to user space by copy_to_user space.
But link is missing ...I dont know how will my user space will access kernel space means my function in kernel space which will do copy_to_user /....How my user space function will call my kernel level function ..
Can any one of you provide me with some example file which are doing this .I know every char driver is using it ...but i could not trace back how user level function is accessing it ...i m confused between user space and kernel space.
Today I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
How to use execv from kernel space to call a user space program writtenfor socket prog.
I tried to write code for socket in kernel but its not working.
Socket code in kernel is also needed.
I was trying to install Fedora 13, on to my laptop. I have 30 GB of unallocated space in extended partition. When trying to install Fedora 13, I got stuck, as the installer says that there is no free space for installation.can convert the unallocated space into free space.
View 1 Replies View RelatedOS: RHEL AS 5 64-bit
HDD:300 GB Hardware mirror (HP blade bl460c)
While installing OS, in partition window after OS file system structure I've left 277 GB. But after installation it shows Size - 255GB and available disk space is 242 GB.
Isn't it weired? How can I use the total amount of space in Linux? I need the whole 277GB exactly. What should be my workaround?
I have a list of files in a directory which starts with - or have space.
I need to copy them back without the space or -?
linux1[sim]% ls linux1[sim]% cp ./-* ./*
I have red hat linux server and it has mysql installed whenever i write on terminal command mysql -u root it shows error "ERROR 2002 (HY000): can't connect to local MYSQL server through '/var/lib/mysql/mysql.sock (111) "
And another problem is that it is showing 0 byte free space istaed of freeing the space. it may seems that both problems are dependent on each other.
I have a big partition ext3 and System Monitor show me that there are 14Gb of Free space but only 4Gb of Available space.
View 4 Replies View RelatedIn a 32-bit system, max memory addressable is 4GB. Now Linux kernel does memory mapping division of 1GB for kernel address space and 3GB for user address space. That means 4GB of virtual address space is divided between kernel (1GB) and user (3GB).
Q1. All virtual mapping utilizes the available physical RAM without any division? I mean to say that if RAM is 512MB then a page in kernel space can lie any where RAM (leave aside old PCI dma accesses)? (How this fits to fact that kernel memory is non-pageble)
Q2. If a process is created in user space, it has visibility 4GB address space or 3GB address space?
My system is dual boot with win7 and ubuntu. I have free space of around 10 gb. I want to add this free space to my ubuntu drive. How can i do that?
View 4 Replies View RelatedI have the following requirement in my module. The driver gets some data from the external device. After getting 1MB of data it has to send it to the user space application. What is the best thing to implement for this in driver.? Is it ok to implement like, after getting data, the driver will send a signal to the user space application. Then the user space application sends an ioctl to read the data. Is there any alternate, that the driver directly sends the data without the user space application asks for it.?
View 4 Replies View Relatedwhats the difference between restarting/stopping apache using 'service httpd restart/stop' and apachectl restart/stop. I know that using 'service httpd restart' is actually a script in /etc/init.d/httpd but what about apachectl?
View 1 Replies View Related