OpenSUSE Wireless :: Installing Aircrack-ng In SUSE 11.3?
Aug 29, 2010
I have tried to compile Aircrack -ng in Opensuse 11.2 I have received the following output
linux-z7wt:/home/jcaser/aircrack-ng-1.1 # make
make -C src all
make[1]: se ingresa al directorio `/home/jcaser/aircrack-ng-1.1/src'
make -C osdep
make[2]: se ingresa al directorio `/home/jcaser/aircrack-ng-1.1/src/osdep'
Building for Linux
I'm having trouble installing a usb wireless adapter. Code: # lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 046d:c526 Logitech, Inc. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 004: ID 0bda:8171 Realtek Semiconductor Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(It came with a linux driver but not sure how to install it) Code: /2009_1106_RT3070_Linux_STA_V2.1.1.0 (2) # ls chips iwpriv_usage.txt README_STA_usb sta common Makefile RT2870STACard.dat sta_ate_iwpriv_usage.txt include os RT2870STA.dat tools the readme just has a change log, no instructions.
i downloaded a souce tarball for aircrack-ng from linux, when i extract it and move the terminal to its directory and run make and make install it gives me errors like the following
Code: >make make -C src all make[1]: Entering directory `/home/baronobeefdip/aircrack-ng-1.1/src' make -C osdep
[Code]...
as you can see by the little icon next to my penguin i am using fedora (goddard) but i want to know how to install this in several other distros other than fedora because tarballs are universal with linux distros and i wanna know how to install it without using the internet (just want to know how to install it from tarball)
I have a Toshiba Satellite L550 laptop with Suse 11.3 dual booting with Windows 7. Windows can detect the built in wireless card but not Suse, what can I do to get the wireless recognized in Suse.
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
I'm running OpenSuse 11.4 with kernel (2.6.37.1-1.2-desktop i686) and KDE 4.6.00 "release 6".When I first installed the system the KNetworkManager found my wireless network. After entering my details it suddenly couldn't find it any more and hasn't found it since (even after re-install). My network is definitely working. I did try and set it up with ifup but it still couldn't find any network. Unfortunately I don't know anything about networks even less about wireless ones. Many thanks in advance.
ive just installed the aircrack package in my dell vostro 1310 which i bought with its ordinary wireless card ( hell knows what it is. couldn't find..).At the very first time while trying to reach my wireless internet i was using backtrack 4 and i was not sucesfull.. that would be good normally, but it was not. because i couldnt do it cuz my wireless card wasnt being recognized by airmon..so i tought..i can use my wireless with ubuntu... then i got ubuntu again.. and intalled the aircrack.. as i run it i found ou t that still it wont find my wireless card...do i need any further config. to make it work with aircrack ??i can only find eth0, which is my wired network device....
installed opensuse 11.3 on a Dell laptop.NetworkManager and Ndiswrapper, allready instaled(last updated versions), but suse can not detect or see any wireless lans. Can anybody help?
I was using Firefox 3.6 on Suse 11.1, but I have just reinstalled my root partition and now have Firefox 3.0.4. Firefox immediately warned me to install 3.6. I have downloaded a tar.b2, but I have no idea how to install it. Is it possible to do it through Yast? If I need to use Konsole, please can I have instructions and also where I need to put it. I really need to have it installed as I use a plugin which is now not working with Firefox 3.0.4
Whenever i'm trying to install apps via one click install or any other way, it later demands i insert the OpenSuse 11.4 CD into the drive, otherwise it won't install.
I've ordered and received the beautiful 4 disk set for release 11.2 that came on DVD. Like so many Linux users I would like to load it on an older Windows XP box without DVD drive. Haven't seen this release offered on CD's. I've been able to copy it via network to a file on the box, but have no idea which files belong on which CD - I assume it will take 7 or 8 disks like many of the older releases. Don't want to buy a DVD drive for the old box .
I've tried installing Graphite One under my new clean Suse 11.4 64-bit installation. graphite one apparently needs python 2.6 to install and suse 11.4 comes with 2.7. I hope I can just create symbolic links to satisfy the installer to run? I've tried to make 2.6 links under /usr/bin and /usr/lib64. I'm using
Code: sudo ln -s libpython2.7.so.1.0 libpython2.6.so.1.0 to create the links, but I've sort of lost track of all the python library�s (.so .so.1 .so.1.0 and so on). Furthermore I have no idea about how to verify if it is correct. Code: ls -l /usr/bin/python*
I can't seem to get the drivers to install properly. I'm back in dependency nightmare stating it's missing libpng12.so. Located and tried to install it but states that it's already there.
This is the 1st time I am installing SUSE and I wanted to clear some of my doubts:I have the following computer specs:Core i32 GB RAM320 GB HDDATI Mobility Radeon 43301. Is creating a swap partition necessary while installing Suse 11.2?2. Will I be able to install 64-bit version of Suse on my computer?3. Will I be able to run Windows 7 side by side?4. Will I have any compatibility issues with my Display Adapter since I have had problems previously on Ubuntu with my onboard ATi Graphics..
I bought a new laptop in which a Linux Suse Enterprise Desktop is installed,After that, I installed Windows 7 by the common method: Using Gparted CD, but the problem is that after the end of the installing of Windows 7, the latter became as the first only OS installed in, and the grub of Linux Suse has been disabled , and the only way to enable the grab (in order to use dual-boot, switch between Suse and Win7) is to use the Linux Suse CD and enter to it for enter some prompt command (as u know), but I didn't get the CD with the attached pack, I got instead of it, a System Recovery CD, the only option shown in the first page is to restore the system and not to enter it
Hence my question: How can I enter to linuxSuse to enable the grub to activate the dual-boot?Can't I enable the dual-boot from command line of Windows 7?
Before installing OpenSUSE I shrunk my Win 7 partition down in half, then created 3 partitions out of the new free space for /root, /home and /swap. I installed opensuse and when it got to the bootloader section I kept getting Grub error 17 - cannot mount selected partition, and so on. I made sure it was writing to the MBR and also into /boot if that makes a difference, but I did get a prompt that said YaST couldn't make changes to /dev/sda (I'm paraphrasing and can't remember the exact error message). At the moment I have suse installed and my windows partition intact, but no bootloader (not even windows one) so all I can do is boot to Live CD.
Below is the output of fdisk -l. There's quite a few more partitions than it's showing, sda3, sda4 and sda5 are my /home, /root, /swap and the other ones are windows partitions, like the system recovery along with the win7 install. During the suse install I formatted the home and root partitions with ext4 filesystem.
I have tried to install and enable java, follow the instructions of this link:[URL] when I try to enable de java, for firefox, I can't linked de java with the browser, because I can't find de folder "plugins" on the path --> /lib/usr/lib/firefox).
My question to the community is should I preform a fresh install of OpenSuSe 11.2 or upgrade my current version of OpenSuSe 11.1? As of current I just use my system to surf the web check, email and Basic Business needs. The specs of my Laptop are:
OS Information OS: Linux 2.6.25.20-0.4-default i686 Current user: jraglin@Jada System: openSUSE 11.1 (i586) KDE: 3.5.9 "release 49.1"
well, gonna straight-explain what I`ve here: had a Win7 64bit installed machine and created a D drive as I was intended to install Suse there (so it`s `Extended`) after succesfully installed SLED and finally restarted the laptop to see use Win7 again there was no Loader for me to choose which Operation System (I have another machine with XP,Ubuntu and Pardus - never had sucha problem)then I had to chose SLED of course but this time it didn`t bring me to the login page but to the Command Line of SLED, and the thing is that I can`t use command line on linux. tried several times and with failsafe login but stıll having command line and there is no Win7 to run on Loader.
install the firefox 3.6 on opensuse Desktop edition. As my new application software is only supporting 3.6 or greater version of mozilla firefox. i was forced to upgrade or to reinstall my current firefox (version 2.0.0.13). kindly help me and please tell me what is the procedure to install forefox 3.6 or higher version in opensuse 10. i cannot upgrade opensuse 10 to opensuse 11 or 11.3 as my company wont allow me to make modifications in the operating system. i have the latest version of firefox downloaded. the format is tar.gz2 while i am trying to extract it. i find errors in extracting even after extracting successfully i find permission errors.
I've installed openSUSE 11.1 in my desktop with default firefox as web browser. Whenever surfing graphical sites Its says flash need to be installed and in the Adobe site which package I've to download? (Yat or tar.gz or rpm, etc.. etc..) and how I can install it.
I recently upgraded to OpenSUSE 11.4 GNOME on my ancient Compaq Armada E500 (Pentium II processor w/512MB of RAM) and now I'm trying to install my wireless driver with ndiswrapper. I've done this a couple of times before, but I'm having trouble getting ndiswrapper to find my driver. The driver is located in a folder on my desktop, but when I type the command 'ndiswrapper -i home/edwin/Desktop/WPC54G_40826/LSTINDS.INF' I get a message that there is no such file or directory at ndiswrapper's location, which is usr/sbin/ndiswrapper. So how do I get ndiswrapper either to look in the directory where the file is located or get a copy of LSTINDS.INF into the usr/sbin/ directory, which must be accessed as root?
I've got a Suse 11.2 laptop with a bluetooth Wifi device (recognised and working), and an Android 2.1 smartphone (Motorola Milestone). I would like to connect the two via Wifi. I don't have a Wifi router, I've just used it now and again through hotspots. I normally connect to the internet via a mobile broadband USB dongle.So, I suppose I need to configure my laptop as a Wifi router in order to set up our little private LAN between the two devices. Is that right? If yes, can someone please point me to a relevant howto because I've searched high and low and didn't find anything. :-(If the above is not right, then where should I look, please? Is it possible at all, actually?