What is the minimum configuration to postfix that I need to do (i.e. to its main.cf file) in order to have the following:mail go from user1 on comp1 to user2 on comp2 on same landemonstration:
user1@comp1# Mail -v "" user2@comp2.somelan.com
hi there
[CONTROL-D]
[code]...
We are using postfix for relaying our internal system generated mail to other domain through google apps. All client servers able to send mail through the postfix server, only user of local postfix server(root, etc) unable to send mail with command like mutt, mail.My detail configuration given below:
Code:
postconf -n
output
Code:
alias_maps = hash:/etc/aliases
command_directory = /usr/sbin
config_directory = /etc/postfix
[code]....
I am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
I have two computers in my home running ferora . I want to copy a file from my 2nd computer to my local computer. Local PC:- 192.168.1.10
Remote PC:- 192.168.1.20
[root@localhost root]#scp 192.168.1.20:/home file1.txt
root@192.168.1.20s password:
scp: /home not a regular file
[root@localhost root]
I have been able to use the mail program on my old Ubuntu instasll which I found quite handy. However, it isn't functioning "out of the box" like I expected. I've tried to configure it as mail was in Ubuntu to no avail.
View 4 Replies View Related(Desktop with Debian sid) How do I configure Exim4 to send local mail locally and other mail through my ISP? I just did dpkg-reconfigure exim4-config and none of the choices seemed to give me the answer. I have a lot of frozen email addressed to:
root@<My_ISP_SMTP_URL>. I also don't know what happens to regular email sent from Mutt. I have no problem sending email through my laptop on the same LAN.
I have a mail server running Postfix and the problem I'm running into is that when trying to send mail, I get a "relay access denied" error.Inside my main.cf, I did not specify 'smtpd_recipient_restrictions' so by default, the variable is:
Code:
smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
The 'mynetworks' variable looks like this:
[code]....
I'm trying to configure postfix so smart daemon can send out notifications emails. My system will need to send emails to a mail server that is on the same local network. I have not had much luck in getting this to work, and am confused on what I need to setup to do this and how to set it up. Does my system need to be apart of the same domain as the mail server? If so, how do I do this? Is there any restrictions sending emails from the command line as the root user? Do I need to configure a relayhost?
Basically all I need to do is send emails to a local mail server, i.e. a mail server on the same local network. I do not need to receive emails. I am rather clueless as to how to set this all up, and what I need for this basic email functionality. I have read and tried many postfix configuration tutorials, but when I try to send out a test email to a email address on the local network mail server I always get "Connection refused" to the server and deferred or bounced status on my test email.
The thing is we have 2 servers one is bugzilla + proxy other is mailserver (internal)
The thing is when my dev team files any bug the bugzilla can't send mail to a user user@test.local.com
P.S:i am actually having problems since the sudden power cut and server restarts
the local mail server is having zimbra package installed
I have a CentOS 5.4 nas box that I want to monitor.
I believe I can setup mdadm to mail me when there are issues by addin the following line to /etc/mdadm.cong Quote:MAILADDR root
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
I installed Fedora 12 on my laptop. I have a wireless connection to the internet that works fine, I attached an Ethernet cable from this laptop to a windows machine. There is a green light.
I can ping my localhost. I can ping the windows machine using it internal IP address via the router. However, the eth0 IP address does not work when I ping to it from the windows nachine. Also, I cannot ping to the windows machine using the IP address associated with the Ethernet connection.
The devices tab under ubuntu one preferences lists only <LOCAL MACHINE> the staus at the top says disconnected, the connect button is grayed out and the reset button at the bottom right does nothing. Files don't sync etc but I think this is as a result of the situation described above. I have tried on the advice of an older thread to delete the token for Ubuntu one from 'passwords and encryption keys' and then revisit Ubuntu one preferences in order to sign in again and grant my computer access but this made no difference.
View 9 Replies View Relatedi would like to connect from my home pc to my local machine at the university (fedora 12) behind a main university server(linux) through vnc. specifically,to connect normally through ssh/X to my local pc i have to ssh first to the main university server and then ssh to my local pc. Namelly:
ssh -Y -l loginname main.server.name
and then
ssh -Y my.local.machine.
On my local machine there is a vnc server running that I would like to access it from home (linux machine). Actually linux is running everywhere.
The desktop computer stores most of our family's files and is mostly powered on, installed with Debian/openSUSE (KDE4).
We have 2 more portable (also Linux, KDE4) computers and frequently need to access files stored in the desktop. Currently file transferred is by usb thumbdrive which is troublesome.
The computers are all connected to a wireless router that provides access to the internet.
Reading/goolging and understand that there are many ways to share files to the extend that I am lost - Samba, NFS, SSH .....
My problem is to find out: What is the best way to access computers within the local network? "Best" here means:
- Secure
- Relative ease to setup
- Easy to use, file access with GUI (file manager?) as the entire family is using the computers.
I am running ubuntu 10.04, and I have one website up and running 1 website.from my local server, from my local computer on the same network I can type in the ip address of my server and I do get the default webserver is running page, however when I try to connect to my domain, it cannot find it. I have run a ping, and it reached it just fine.
View 7 Replies View RelatedI couldn't find an answer to this question (not including vpn) on different threads so decided to eventually post it, though it's probably easy one. I would like to connect to some application on known IP and port in the internet from my LAN computer. However to do so (I have some application, not any administrative constraints or not being allowed to) I would like to use local addresses. So, let's say - I want to connect to the external host VV.XX.YY.ZZ, port AA using 192.168.EE.FF port BB. Baically so far I have limitation in my application (too many places for possible error, to correct it right now - will change it in future). Is it possible that after my application sends request to 192.168.1.EE port BB, my Linux transparently translates it to VV.XX.YY.ZZ:AA? I tried iptables tutorials and some forums, but nothing seems to be addressing this issue. I don't know if it's event possible with iptables but am pretty sure this should be possible.
View 5 Replies View RelatedI have a slack 64 13.1 box, that I want to be able to control the monitor of from my laptop. Here's the scenario: I can already control the music remotely via X forwarding banshee to my laptop (banshee shows up on the laptop and music comes out on the desktop). Now I want to be able to open a movie on the desktop's display via the laptop.
Now googling this comes up with solutions for X forwarding, but I don't want it to forward X I want it to display on the desktop.
Is there a command to remotely shutdown a computer on the local network? I have a computer running as a file/print server and I have no screen or keyboard connected to it. Would be great if I could shut it down from my laptop. I have the needed credentials (as I'm guessing these would be needed in the command?)
View 2 Replies View RelatedI recently setup motion on one of my computers with a USB camera. On that computer if I type [URL] I can see my live video. If however I type [URL] on that computer or any other on my wireless network, I get a page cannot be displayed. I checked that UFW was disabled and I am able to ping the motion computer from any other computer on my network. Also I am not sure if it matters but I do have apache installed on my motion computer as well. why I cant view my live video from different computers I am using Ubuntu 10.4 on all computers
View 4 Replies View RelatedSending computer runs linux. Recieving runs OS X.
View 2 Replies View RelatedI'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
I just added my login id to /etc/aliases to forward root's local e-mail to my local e-mail account in evolution.
As always, when I make a change to /etc/aliases, I run newaliases. I now get the following, and root's mail is not showing up in my local mail Inbox:
Code:
Is this correct?
I understand my hostname (i.e., Eng-Lab-010) is not a fully qualified host name, but I never had a problem before. But it appears this not a good thing. What should I do?
I cannot get exim4 to actually deliver any "local delivery only; not on a network".But whatever I do in the config, all mail gets frozen with entries in the log file like:"root@empty R=nonlocal: Mailing to remote domains not supported"Maybe the problem is that there is no fqdn for the computer (and will never be). How can I enable local mail delivery?
View 14 Replies View RelatedHow can I split my local mail box into an individual files for each mail. The senario of mine is I fetch some emails from a mail server into my local linux box with fetchmail command but I want each fetched mail in a different indivitual file for easy file processing and manipulation for example sending those email through sms and so on
View 1 Replies View Relatedrecently i configure postfix on my fedora core 9 system i want to send mail from one user to another till now i did not create any user, i just configure the main,cf file with the help of some link i found on internet
here is my main.cf file
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
[Code]...
i dont know what i should write about my main.cf file so i post the whole file here.
so can anyone tell me is that the configuration is correct and and how do i create new user to my domain name and how can i send and receive mails from one user to another user using postfix
My problem is that I cannot send mail with postfix. For all mail I get connection timeout Example: (delivery temporarily suspended: connect to [URL] Connection timed out)
View 13 Replies View Relatedtelnet localhost 25 when rcpt to:mike@test.com ,report error: 451 4.3.0 <lisi@test.com>:Temporary lookup failure
View 1 Replies View RelatedI'm having a problem with Postfix sending email. To be more specific, Postfix sends mail perfect but when my web server running webmail (RoundCube) connects to my mail server to send email, it fails & there is nothing in the logs that explain to me why:
Code:
Jan 8 11:53:02 mail dovecot: imap-login: Login: user=<carlos>, method=PLAIN, rip=192.168.0.201, lip=192.168.0.200, mpid=2161, TLS
Jan 8 11:53:02 mail postfix/smtpd[2162]: connect from www.iamghost.org[192.168.0.201]
Jan 8 11:53:02 mail postfix/smtpd[2162]: setting up TLS connection from www.iamghost.org[192.168.0.201]
Jan 8 11:53:02 mail postfix/smtpd[2162]: Anonymous TLS connection established from
[Code]...