Ubuntu Networking :: Computer Finding The Name Of Another Computer Under DHCP?
Sep 10, 2010
I have two Linux computers and one small home router with DHCP functionality. I configured the router with the "dynamic DHCP" setting, ie, the static DHCP with MAC-Address was not used. Before that, I used the manual IP configuration, defining the two computers' names in the /etc/hosts file.
Example:
10.0.0.2 comp2
10.0.0.3 comp3
Now, with DHCP, the above example is no longer appropriate, because the DHCP server is supposed to tell the computer what IP number it will receive. However, I am missing something, because I haven't figured it out yet how to make one computer know the other computer's name. Is it that I haven't installed a name-finding package? Is there a simple way to accomplish this (one computer finding the other computers' names)?
View 9 Replies
ADVERTISEMENT
Aug 18, 2010
I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies
View Related
Jul 9, 2010
I have a small server that will collect industry machine info and report it to our main server here. Now, we plan to make a few of these units but we will need to be able to remote into them (ssh) to kick off the operations when they are delivered. Problem is, how can i ssh into a machine that has an ip given by dhcp? I could have the server send me it's internal and external ip, but that still does not open port 22 (or whatever i need) on the router so i can get to it from an outside line.
View 3 Replies
View Related
Dec 7, 2010
I got a machine with RedHat Enterprise Linux 5 installed. I set the ifcfg-eth0 as following:
Code:
DEVICE=eth0
BOOTPROTO=dhcp
ONBOOT=yes
TYPE=Ethernet
when the machine rebooted, eth0 has the ip address 192.168.24.234. But if executing 'dhclient', eth0 will get the ip address 10.200.34.208, which is my expected ip address. I'm not quite familiar with networking things. I don't know what's going on there. Why should I need to execute 'dhclient' to obtain the expected ip address? Is there any way to obtain the ip address 10.200.34.208 right after host boot?
View 3 Replies
View Related
Dec 29, 2010
at the moment we're running an isc dhcpd with about 300 clients to serve. Because of inconsequent maintaining i think we have about over 50 dead static client entries in our dhcpd.conf. So we want to change our construct.Our aim is to allow a mac on the dhcp server to get an ip address. If this mac hasn't registered an ip address from the dhcp server for a time more than 90 days, the host entry gets disabled or deleted automatically. I'm searching for such kind of dhcp server configuration for many days. Have you any idea if there is a possibility to implement such a configuration?
View 1 Replies
View Related
Nov 11, 2010
My wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.
View 2 Replies
View Related
Sep 21, 2010
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies
View Related
Jun 7, 2010
i want to find ip address of other computer which are connected in LAN..suppose ther are 5 compter in LAN and i want to find ip of all remaining 4 computer using my computer only in command or any other way is ther....
View 4 Replies
View Related
Jan 1, 2010
I downloaded the vnc 4.1 on my linux computer which is running Ubuntu I'm not sure how to view it on a windows computer. I really have no idea what i'm doing so can anyone that answers please add as much detail as possible.
View 3 Replies
View Related
Mar 11, 2010
using Debian 5.0, GNOME desktop.my DSL service was to be connected today.the problem is my DSL light keeps blinking.ethernet light is solid.how do i setup my DHCP on my computer
View 12 Replies
View Related
Oct 24, 2010
I got an old laptop from my brother, it has ubuntu 6 on it right now. The computer is real old, complete with a windows 95 and pentium II sticker on it. I'd like to put a new install on this but first I would like to find out how to check the hardware specs like processor and ram so i can choose what to install. How can i do that?
View 9 Replies
View Related
Aug 30, 2010
I'm searching for the cheapest single board computer which can run Linux. It must have ethernet and at least one serial port.I'm currently looking at these modules from Technologic Systems, but wondering if there's anything cheaper out there?
[URL]
View 2 Replies
View Related
Jan 28, 2011
I am trying to decrease volume of noise coming from computer as much possible, till one point from where I don't know exactly what's the source of noise.
"That noise" starts coming out of computer few seconds about booting, not while POST test, and then it's constant. To me it seems like it's coming out of cpu, but not fan. (I have disconnected all hard drives, have gpu with passive cooling installed, and it's still there. Cpu is AM3 socket AMD Phenom II 810 processor, and motherboard is Asus M4A78T-E.
Also, my other computers with Intel and other AMD processors does not produce such a noise.
Does that noise come out of CPU? is it some "computing sign" of processor (assuming that during first seconds of booting are perfectly quiet), or kind of general problem of AMD (or AM3 socket) cpus.
View 14 Replies
View Related
Dec 11, 2010
Is there any way to find out which device/event caused Ubuntu (10.10) to wake up from the most recent sleep/hibernation? I am trying to troubleshoot some sleep issues on a new box, and knowing what's causing it to wake up would help. I did check /var/log/pm-suspend.log but all it seems to say is Sat Dec 11 22:18:27 GMT 2010: Awake.
View 1 Replies
View Related
May 28, 2011
I have three computers in my network, but two will be mentioned. Computer A is a Linux Mint 9/Windows 7 dual-boot, and I have just installed Mandriva Free 2010.2, which I will call Computer B.
Now my main problem is that Computer B, while it can see and access Computer A's shares as well as the third computer, the aforementioned computers cannot access Computer B. The message was: "Unable to mount location/Failed to mount Windows share." Now, the SMB protocol was used because of the third computer and Computer A have Windows OSs installed in them.
What I originally wanted was that I can share Computer B's NTFS partition, namely Documents and Downloads, to the other computers. And I can't do that, because of the error message.
What I can do, however, is use Computer B to view shares from the other two computers (Computer A, as an example). By my experiences in Linux Mint, I understand that I'd have to mount my Windows partitions in order to share them. I don't even know if my NTFS drive in Computer B is mounted, though that is what was described.
View 2 Replies
View Related
Sep 24, 2010
First, (for samba) how do I determine whether my computer "gets IP address information from a dhcp server on the network," and whether "the dhcp server provides info about WINS servers ("NetBIOS name servers") present on the network," and consequently whether a change to my smb.conf file, "so that DHCP-provided WINS settings will automatically be read from /etc/samba/dhcp.conf," and whether the dhcp3-client package must be installed?
View 2 Replies
View Related
Sep 30, 2010
The dhcp doesnt work unless i put a switch or router between the ubuntu gateway and the connecting computer.
setup
Code:
Code:
Code:
Code:
Im on ubuntu 10.04. is this normal? or should i be able to connect without having a router or switch between the ubuntu server and the internal network....
View 3 Replies
View Related
Jan 9, 2010
Here's the situation:
I have Ubuntu 9.1 with wubi and Vista on my laptop. I was playing my laptop through the TV, then I tried to switch it back to computer control and the computer went black. I had to hold to power button to restart, and suddenly grub4dos starts up when I try to launch ubuntu. I can still launch Vista. Is there anything I can do to save my system? At the very least, I would like to be able to copy data from my ubuntu system to my vista system. How can I do that? I can't find C:/ubuntu/disks. It doesn't seem to exist.
View 1 Replies
View Related
Jun 30, 2010
so here's my problem. I am trying to install windows xp on my computer in virtual machine so i can watch netflix on my computer. The disk will not start up, if I restart and try to boot from load i just sits there and says boot from cd. The disk drive plays music cd's fine, so i dont really know what the issue is.
I dont know that much aboutut ubuntu. a tech friend put it on hard drive he gave me after mine crashed. also i should ad that i took the disk to someone else's house that haswidnows installed and the disk worked just fine, so its not a disk problem
View 8 Replies
View Related
Jul 9, 2011
I've been trying to find a way to watch videos from my main desktop computer on another computer I've plugged into an HDTV. I'm such a Linux newbie that I decided to give Mythbuntu a try. It was way to complicated for what I needed, and I'm sure that some more experienced people reading my first two sentences laughed to themselves at my naivety.
What I am trying to find is simple: browsing one computer's home folder from another computer, and playing the videos therein. If there's anything like Mythvideo that requires less than half of the skill requirements, I will telepathically send love to the person that informs me of it.
View 2 Replies
View Related
Jan 30, 2010
1. How can I stream music from my ubuntu computer (9.10) to my windows computer using vlc?
2. What nvidia driver should I use? The one found in "hardware drivers" is 185 but nvidia's site has 190! which one should I use?
View 3 Replies
View Related
Aug 29, 2010
i have 2 computers.both have pidgin messenger with the same accounts (yahoo, msn, aim, facebook...). both can connect at the same time. both connect at startup.both work well.some of the chat protocols disconnect upon sensing multiple connections (as in, when one account signs in from two places).good.others don't.bad.
is there a way to remotely disconnect the OTHER computer's pidgin while using the current computer? while both instances of pidgin are running, the OTHER computer will see all incoming messages on pidgin. anyone at that computer will see a one-sided conversation.simple solution would be to stop them from connecting at startup. that still doesn't solves the problem of "what if i forgot to turn one off" or "what if someone runs pidgin on the other computer."
View 4 Replies
View Related
Mar 17, 2011
I am wanting to make traffic pass through my computer to another computer.
Here is my current network setup:
[WAN] > [MODEM] > [10.1.1.3] > [192.168.56.101]
How can I make my computer ([10.1.1.3]) forward incoming traffic on port 25 to [192.168.56.101]?
View 1 Replies
View Related
Jan 5, 2010
for christmas my parents got both my younger sister and i acer mini computers, model d250-1958. my sister was trying to change her password that lets herself as a particular user log in. somehpw she messed up the password and its not what she thought it was and now she doesn't have any way of accessing anything. i thought that there might be an ovveride system or a reseting trick. i've looked in the manual but cant find anything of the sort for either of the two options.
View 5 Replies
View Related
Jun 17, 2011
I am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
View 1 Replies
View Related
Apr 17, 2009
I boot linux from a usb drive so I can carry my distro wherever I go - I've been doing it for quite some time now and it's always worked wonderfully. Problem: This morning my little cousin unplugged the computer WHILE I was booting into linux. Power loss has happened before, but with no ill effects. This time however, it's decided it won't boot. The screen clears, and just as GRUB is about to load, it freezes and the computer reboots over and over.
I booted to a LiveCD of Ubuntu to try and fsck the drive, but it won't mount the volume. I've worked with this install so long, and have customized it so much I **really** don't want to do a reinstall.. What can I do?
View 3 Replies
View Related
Jun 20, 2011
I have two computers in my home running ferora . I want to copy a file from my 2nd computer to my local computer. Local PC:- 192.168.1.10
Remote PC:- 192.168.1.20
[root@localhost root]#scp 192.168.1.20:/home file1.txt
root@192.168.1.20s password:
scp: /home not a regular file
[root@localhost root]
View 3 Replies
View Related
Jun 28, 2011
I have a situation where I am trying to move some data from a Linux computer to a Windows computer. In all there is 700GB of data to move in about 1.5 million files, so I don't want to do this over the network.My first thought was to use an external USB hard drive and create an NTFS partition and copy the files from the linux computer to mount on the Windows computer. After 4 days of copying without completion I abandoned that idea. I thought the NTFS might be slowing it down, so I created an EXT3 partition. 4 Days later it was still copying. I did some calculations and there was no way the USB 2.0 connection was that slow. I then used ddrescue and cloned the drive to be copied overnight and it took about 12 hours. i was able to mount the USB drive under Linux and access the files appropriately. The only problem is that I can not access that USB drive on my Windows 7 computer. I have tried Explore2fs, DiskInternals Linux Reader, and Ext2 Installable File System For Windows, but none of them is recognizing the external drive.
View 5 Replies
View Related
Feb 25, 2011
I need redirect serial port from ONE computer to ANOTHER computer, and at the another send this port to VirtualBox with WindowsXP.VB needed because i need to use software for windoze I do this:NE computer:socat tcp-l:54321,reuseaddr,fork file:/dev/ttyS0,nonblock,waitlock=/var/run/tty0.lock
ANOTHER computer:
socat pty,link=/tmp/ttyS0,waitslave tcp:ONE:54321
Now (at ANOTHER) i've set serial port in VirtualBox as
[code]...
View 2 Replies
View Related
Feb 9, 2011
I ran across a cool program that I would like to try out called x2x, which for those who don't know allows me to use the keyboard and mouse from one computer on another computer. Just google it and you'll find explanations better than that, but you get the gist?
Anyhow, I've installed SSH server and x2x on the computer that I want to control (laptop) and on the computer that I want to use to control the laptop (workstation) I stuffed into a terminal the following:
Code: ssh -XC riley@riley-Eee x2x -east -to :0.0 which, riley@riley-Eee does in fact refer to the laptop that I want to control. All I get back out is: Code: ssh: Could not resolve hostname riley-Eee: Name or service not known even though both systems are on the same router. I would assume that it should work right away no problem, but it doesn't. I don't understand SSH very well (or networking in general) so I'm wondering if someone knows how to step-by-step me through getting it to work.
View 1 Replies
View Related
