I am exploring Ubuntu 8.10 on my Asus netbook without yet installing it. While using Ubuntu I cannot get it to recognize any wireless networks.Is this because I am only exploring Ubuntu and it has not yet been installed? The networks are recognized when using the XP operating system.Will Ubuntu recognize the wireless networks once it is installed as the operating system?
View 9 RepliesI had the same problem with normal ubuntu, wubi or even after instaling it in a virtual pc
I've got a wireless router with a WEP security, when I choose my connection and put in the key it just tries for some time and then ask me again for the WEP key. And it goes like this on and on and on, I've tried to connect at some firends gome with the same kind of connection and it doesn't work either.
I think that in an older version I did connect to an unprotected connection but I cannot take out the protection because it is my roomsmate wifi.
I recently installed ubuntu 10 on my Compaq mini 730ej. I installed it using the wubi software. Although it works fine with regular lAN connection, it doesn't recognize any wireless networks - when I click the icon I see a "missing firmware" massage. Now - I am a linux newbie, so be gentle, but I would very much like to solve this problem since.So what can I do?
View 9 Replies View RelatedNetwork manager doesn't recognize nas0 interface and i have problems with using Gwibber, Evolution mail,Empathy, etc Is there any way to add nas0 in Network manager?? I know the solution to remove Network manager, but i need Network manager because i'm often using wireless (as second internet connection).
View 1 Replies View RelatedI installed Kubuntu 9.10 using wubi (dualboot with Windows 7). There were no network connections available, even though I have two that can be used when I switch to Windows. After two hours I got tired of trying to fix the problem and rebooting to no avail, so i uninstalled and installed Ubuntu instead. I've still got the same problem, and after hitting a hole in my wall and shaving my head, I have no idea how to fix the problem. How do i get Ubuntu to recognize my wireless network?
View 9 Replies View RelatedI recently installed Ubuntu 10.04 in a HP Compact nc 9010 andan't see any wirelessnetworks
View 9 Replies View RelatedI have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
when it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
View 7 Replies View Relatedjust installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that.
View 7 Replies View RelatedI've been trying to install 11.04 on my 2009 Macbook Pro, but I can't complete the installation because Ubuntu doesn't recognize my wireless connection.
View 9 Replies View RelatedDo I need to install drivers or something to get it to recognize that my laptop is equipped with wireless? It's a Toshiba Satellite L505-S5990.
View 9 Replies View RelatedPerhaps this is sheer ignorance, but i just cant figure out which wireless chipset i´ve got. Its irrelevant to say that my wireless conection doesn´t authenticate (repeating the process without end). So this is the output of lspci:
linux-wghx:~ # lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
[Code].....
I installed Ubuntu on a machine after erasing everything else and the wireless has never worked. It says that the wireless has already shut down even though it recognizes the wireless network and my other non-linux machines see the network and work fine.
View 1 Replies View RelatedI have a problem with my Grundig's (model GNB-250D) laptop wireless card. I recently installed Ubuntu 10.10 and tried to use a wireless connection to browse the internet but it didn't detect any, it seemed strange as it worked perfectly on Windows. I can browse the internet fine if I use an Ehternet cable.
View 4 Replies View RelatedI deleted all APs in my Wireless Section of network manager. After that, the whole network manager icon disappeared. I added the icon back on the panel, but I don't think its the right one. It doesn't do the two green cicles thing when I connect my ethernet wire in. It also doesn't show any wireless AP when I left click on the icon. It doesn't even have an X mark on the bottom left of the icon when no network is detected
View 1 Replies View RelatedI'm trying to activate a wireless network on an ubuntu server 10.04. The machine has a TPLink PCI wireless card. Card is well recognized, and scanning for wireless connection it finds correctly the essid of the access point in the room. But when I try:
Code:
$ sudo iwconfig wlan0 essid "apoint" key s:my_key_8
this error is returned:
Code:
Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; Invalid argument.I looked for similar situations over many forums, and I found that it could be the card doesn't support the encryption type (My AP uses WPA with TKIP). However if I use an ubuntu desktop live CD on the same machine, I can connect witouth any problem with NetworkManager 0.8.
i'm experiencing some weird behaviour: I have a server running ubuntu 10.04 and two Apple laptops in my home network. Sometimes after booting up the server doesn't connect to the wireless network, but instead "kills" the connection of the laptops. (The network then isn't available for about two minutes - it's showing but it can't connect) On the server the network interface is up, but not associated.
Sometimes the interface isn't configured properly (iwconfig isn't showing an entry) - but in this case the behaviour obviously isn't showing. some information about my system:
Ubuntu Version: Server 10.04x64
Wireless Card: Netgear WG311v3 with marvell chipset
Driver: ndiswrapper+mrv8335x64
my cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
View 2 Replies View RelatedSo the only experience I have with Linux is all from Ubuntu, and I just spontaneously decided that I needed a change...two days later my triple boot Macbook Pro got slimmed down to a dual boot OSX/OpenSUSE 11.2 machine. But there are some general problems, and I have absolutely no idea how to solve them. First, wireless isn't recognized at all...there isn't even a space for wireless connections. Second, I haven't been able to get compiz to work yet, and I can only suspect that the system doesn't recognize my video card, or the driver isn't installed. Yet again, no idea how to fix this.
View 9 Replies View RelatedI have an Aspire 7741z running Ubuntu 10.04 I just loaded the 32 bit version today, then did the Update manager (398 updates) Before the update everything worked fine. After the update, no wireless. Password & security is correct, all wireless setup is correct. Aside from my network, I do have access to a local hotel (next door) and I can always get into their unsecured guest network, that doesn't work either.
I believe it is the driver since I have loaded Ubintu 10.10 32 bit with the same reaction. It will connect when I put in the live disk, but not from the hard install. output from lspci
[Code]...
I can't get on the Internet at all not even through Ethernet. (It recognized my Ethernet hardware but doesn't connect.) I got the broadcom-wl drivers from Packman and installed those and it still was a no go. I tried to get the drivers straight from Broadcom and those didn't work. I couldn't compile the source code from the Brodcom site because i could not get build installed (got make installed but build just didn't install.)
Info:
Card
BCM4322
When I enter /sbin/lspci -nnk
Code:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
[Code]....
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I attempted to download and install Linux XP and the installation appeared to be a success. But after install of course the system reboots. Well after rebooting before opening up the desktop it forces me to set up the domain or something It would not recognize my internet/network connection. My ISP provider doesn't use any type of authentic. My internet connection is automatically configured through my modem. How do I get Linux XP to recognize my internet connection and finish the final process so that I can load into desktop ?? I also had a very similar problem with Linux Ubuntu Studio as well. I installed it and I was able to get into the desktop but still was unable to establish an internet connection.
View 4 Replies View RelatedI have a PC for windows connected to my printer. On another PC I just installed & using 10.04 LTS. First of all I am unable to get Ubuntu to find, recognize & install the DCP 395 CN. Linux appears to recognize the MSHOME but does not have my printer listed in the Brother models? This is a wired system consisting of 2 computers through a dsl broadband router. The DCP 395 printer is connected to the Windows PC by USB, if that makes any difference . Would like to connect to the MSHOME or establish a Network that will work.
View 2 Replies View RelatedMy problem is the computer does recognize the wireless connections but when I put the wep key It just start trying to connect and then asks for it again, and this goes on and on and on. I'm pretty sure I got the key right so I have no idea whats going on. This happened to me to with the previous version of ubuntu and also with fedora and installations in virtual pc, or virtual box. Even normal installations with partition. This time I'm using wubi. I didn't get anything with the grep part, I must have done something wrong.
1) PC Brand and Model:
Easynote MX65 P 057
2) Wireless brand, model and chipset:
Using grep in lspci -nn I got this:
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Just in case I'll put the whole information:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) .....
I have just installed ubuntu 10.10 sucessfully, but it doesn't recognize my mobile huawei alisa internet dongle.
View 1 Replies View RelatedMoving this to new topic, since it's no longer under wireless connectivity issues. [Noob Warning] I was having trouble getting Ubuntu to recognize my wireless card, as I have changed from the 3965 that came in my computer to the 4965, which added increased range and G band. Anyway, I read one of the threads on here, and this was the advice given:
Quote:
Originally Posted by pytheas22 First, download this file and save it to your desktop. Then run these commands:
Code:
sudo apt-get install build-essential
wget http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-5000-ucode-5.4.A.11.tar.gz
tar -xzvf iwlwifi*
sudo cp iwlwifi-5000-ucode-5.4.A.11/iwlwifi-5000-1.ucode /lib/firmware
bunzip2 compat-wireless-old
[Code]...
Ubuntu 10.04 does not recognize my wireless usb adapter at all. Its a linksys WUSB100 ver.2.
View 1 Replies View RelatedI'm trying to get Kismet up and running with Ubuntu 10.10 and I'm using an Atheros AR928X, but I don't know what to put in the etc/kismet/kismet.conf file under the line source=
Do I need to install madwifi drivers, or are the drivers that come with Ubuntu sufficient enough? I've been reading other forums and on Google that I should put source=madwifi_g,ath0,madwifi but my device is not ath0, it's wlan0 as shown with the lspci command.
Launching kismet_server: //usr/bin/kismet_server
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng)
Enabling channel hopping.
[Code]....
In some other forum on UbuntuForums someone said to make some changes under SYSTEM>>ADMINISTRATION>>HARDWARE DRIVERS, but I don't have HARDWARE DRIVERS under that submenu. I don't see an option for it anywhere in my version of Ubuntu (Maverick 10.10).
I have recently bought a Toshiba Portege R700-15Q and installed kubuntu 10.04. A similar problem happens with kubuntu 10.10 booted from USB stick. I am a long-time linux user but not experienced with fixing problems. The wireless network is not enabled and it appears that linux does not know that there is a wireless capibility. This is both with and without an ethernet connection at boot. The wireless light on the computer is lit up, but when I go to Manage Connections the wireless and mobile broadband tabs are greyed out so can't be accessed.
iwconfig gives "no wireless extensions" for lo, eth0 and pan0.
lspci returns "Network controller: Broadcom Cooperation BCM4313 802.11b/g LP-PHY (rev 01)"
lshw -C network returns "*-network UNCLAIMED", along with a block of other information which does not indicate a problem to me.