Ubuntu Networking :: Fritz Wlan Usb Installed But Disabled?
Mar 15, 2011
i have just installed a Fritz Wlan USB stick on a practically fresh Maverick 32 Bit install with ndiswrapper.(i used this guide [in german] [URL]...so far so well, problem is, i cant enable the wireless. As far as i can see, this is no "on-button" issue. The build in wireless is either dead or never been there. It shows in the output below, but the "wifi-on/off" button doesnt do anything to the LED thats supposed to turn on and in an case... no connection. I think basically what my problem is that i can't figure out how to enable the wireless (its greyed out in the network-manager) i also installed the 32Bit version of the driver on a 32Bit Notebook. below is some output of what i found on other threads to try:
[Code]...
View 9 Replies
ADVERTISEMENT
Nov 27, 2009
There is no wlan0 interface when trying to run FRITZ!WLAN USB Stick N 2.4 on OpenSuSE 11.2, though it works fine on Fedora 11 and Mandriva Spring 2009.1. All 64bit. Contrary to Fedora and Mandriva, there is no need to compile the compat-wireless module ar9170usb for OpenSuSE 11.2 because the kernel is very recent and includes this driver. Kernel: 2.6.31.5-0.1-desktop The /var/log/messages gives this after I put the stick in the PC. At first it is seen as a mass storage device:
Nov 27 22:00:24 linux-3mwa kernel: [ 73.420755] usb 1-5.1: new high speed USB device using ehci_hcd and address 4
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540834] usb 1-5.1: New USB device found, idVendor=057c, idProduct=84ff
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540841] usb 1-5.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540847] usb 1-5.1: Product: FRITZ!WLAN USB Stick N 2.4
[Code]....
View 5 Replies
View Related
Jan 17, 2010
I have installed open SuSE 11.2 and would like to use my Fritz ups Stick.
I have read a couple of threads about this issue and I do not know if I can follow those solutions presented for oS 11.0 and earlier versions.
View 8 Replies
View Related
Jul 3, 2010
I have a Broadcom B4312(I believe) wireless card and installed the drivers for it, but under the Wireless tab in Network Connections, it doesn't show "wlan0" or anything similar to "eth0"(which it shows under "Wired"). I ran iwconfig and this is what I got:
[Code]....
View 9 Replies
View Related
Jan 15, 2010
Does anybody know what to do? Internet works fine except for that problem.
I can attach files of 33kb in web-based email service (Gmail) but no big ones.
View 3 Replies
View Related
Sep 12, 2010
I installed OpenSUSE 11.3 with disabled WLAN (otherwise the installation process didn't start). Now the system boots only in Safe Mode with enabled WLAN card (when the WLAN card is disabled it also boots in normal mode though). But even if I try to configure the WLAN card in Safe Mode, the system doesn't boot next time (in Safe Mode) until I add "brokenmodules=ssb" parameter. As I understand after reading this forum I should install a firmware/driver, but there is no install_bcm43xx_firmware script in /usr/sbin directory.
[Code]....
View 3 Replies
View Related
Dec 9, 2010
I recently had my AE 1000 linksys wireless adapter driver installed, the info for which can be found here:
[URL]
But today I was presented with 142 automatic updates already downloaded waiting to be installed on my computer. I installed the updates and restarted my computer for the updates to take effect. Well, since then my wireless adapter no longer registers at all, it doesn't even recognize my router let alone connect to it. It is as inoperable as the day I got it.
I am currently using a different computer in the house to get internet. Should I go about following the same directions I did before and reinstall the driver, or is there a more simple way?
View 4 Replies
View Related
Jan 15, 2010
After been convinced by an exchange student from Nashville I am hosting here in Germany I went into openSuse 11.2. I installed and got openSuse 11.2 to work. I must admit, that I was very impressed. It is more than 10 years that I tried a UNIX system and Linux was quite a cryptic thing. First some additional drivers had to be installed to get MP3 to play. However Internet access was possible with cable but the system failed in recognizing the WLAN.
Here is my system:
HP Compaq nc4000
OpenSuse 11.2 (i586)
KDE 4.3.1 "release 6"
Wireless Network
Atheros AR5212
I have looked through some posts but must admit, that I did not understand much of that. I Am willing to learn, however I do not see myself compiling some drivers. If you could tell me which URL could be used for dloading or installing via Yest, If more sophisticated solutions, than I will have to ask my student to do it for me, but he should learn German and learn more about German lifestile in German Bars.
View 1 Replies
View Related
Nov 22, 2010
Printer installed in linux Mandriva 2010.0 always disabled.How to resolved.Windows computer connected to printer always need to reconnect.
View 14 Replies
View Related
Dec 1, 2009
I want to use my CentOS-Server for logging incoming phone calls using an AVM Fritz-Card.It should also be possible to notify clients (Linux and Windows) on incoming calls, or there should at least be a web-frontend.Is there any software like that in the CentOS-Repository available?Or is there another software like that, that is easy to install? I already asked google (an i will go on), but I couldn't exactly find what I want.
View 1 Replies
View Related
Feb 6, 2010
At my workplace the wireless connection is open but once you connect you first need to authenticate on your browser to be able to use the internet.On Windows as soon as I open whatever page I get the login request.On Linux I open firefox but nothing happens, just get the usual error page like if I had no connection. The IP's I get as well as DNS seem ok, I even tryed to match them up with windows.I tried a lot but can't get to the login page.
View 3 Replies
View Related
May 23, 2010
specific Ubuntu supported WLAN PCI-cards? This link shows a list of supported PCI-cards, but which is best: [URL] And the installation needs to be easy! I�ve tried installing these PCI-cards in my computer, useing Linux drivers, NdisWrapper, etc. Unforutately without any success:
- DWL-G510, Ralink Chipset, Ralink RT2561/RT61
- Realtek Semiconductor, RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller
View 1 Replies
View Related
Apr 29, 2011
Today I upgraded from 10.10 to 11.04. After accidentally turning off the computer during the upgrade, booting into recovery mode, remounting the file system as writable and finishing the upgrade, it worked just fine.
However, I can no longer use any wireless networks. Wired ethernet works fine, but the wireless inteface won't even show up when I run ifconfig. When I first installed 10.10, it worked instantly and I was able to use it during installation.
I have an HP Compaq nx7300 laptop with a Broadcom BCM4311 network card.
View 1 Replies
View Related
Jun 12, 2011
I installed 11.04 to ASUS Z9200 Notebook, at first all was fine at least 10 minutes, LAN, WLAN worked ok, but suddenly all is gone, restarted few times -nothing. reintall-nothing...here is some info....any ideas?
mm@mm:~$ sudo lshw -c network
[sudo] password for mm:
*-network:0 DISABLED
description: Ethernet interface
product: 88E8001 Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
[Code]...
View 1 Replies
View Related
Jul 13, 2010
I do have internet cause I am using it on W7. The only thing that I have done different is I left the pc on over night so I guess it went to suspend for the first time. Then I powered off. After turning the pc back on and logging in I have no internet. Not even with the Ethernet plugged directly in. There is supposed to be a little blue light on when it sees the wireless and that is off. When I click on the networking icon in the system tray it says networking disabled. It shows no wireless. When I plug directly in I still get nothing. I'm using 10.04
View 2 Replies
View Related
Mar 8, 2010
I have just finished installing 9.04 via USB onto an Acer Travelmate C110.For the record, 9.10 refused to even boot on this laptop. I used universal-usb-installer and unetbootin, both without success.The installation completed successfully, except that wireless networking is not enabled. Can someone please point me to the correct resource whereby I can get the wireless nic working.
View 3 Replies
View Related
Oct 10, 2010
I can't upgrade to Ubuntu 10.10 because it said that there's a problem with my network connection. When there's none, since I am typing this now.
View 2 Replies
View Related
Jun 30, 2010
I have a Thinkpad T400 notebook that dual boots windows 7 and Ubuntu 9.04. My wireless has worked both in windows and ubuntu for the past several months. However 2 days ago, the wireless in ubuntu stopped working. I think this may be a result of trying to set up a static eth0 connection between my laptop and an embedded board, but I dont see how messing with eth0 would stop the wlan from working.
Symptoms: When I left click on the network connections icon in the tray, all it lists under "Wireless networks" is "device not ready". Needless to say, there are no networks available to connect to. Also the wireless is working fine under windows.
[Code]...
View 1 Replies
View Related
Aug 10, 2010
I have bought a new laptop with win7 on it , I delete win7 and install ubuntu64 everything is ok but my wireless card won't work ( it is recognized) and even I can connect to INTERNET but nothing is download or upload so I have bought another usb wireless card but now when I connect this new card to my laptop it still tries to use the old one and so I could not connect to internet
View 4 Replies
View Related
Aug 18, 2010
I am trying to connect to a WEP encrypted WLAN without using the DHCP server of the AP. (=giving myself a static IP)
So far i have tried:
Code:
But i cant even ping 192.168.1.1 (Network unreachable error). Is it possible that Ubuntu tries to use eth0 (which was connected to a similar /16 before) to ping 192.168.1.1 or is there somethign wrong with my commands?
Also will an AP allow access to the network although i don't have an IP from its DHCP server?
View 3 Replies
View Related
Sep 2, 2010
I can connect my wlan card to router (gateway) ,but I can't go to internet, pinging my router (and everything else) also falied. Same problem was with knoppix but with help of others i solved it modifing etc/reslove.conf IP address to my gateway (nameserver). At ubuntu resolve.conf seems ok, as there is already IP address of my gateway?
View 6 Replies
View Related
Nov 8, 2010
All I want to do is share my internet connection that comes through the eth0 cable to my wlan0 wiki card. Firestarter seems the convenient tool for doing this. BUT it keeps telling me wlan0 not ready. The card is connected correctly and network-manager does see incoming signals.
View 1 Replies
View Related
Dec 25, 2010
I'm a new user of Ubuntu and I think I need some help but let me mention before that I got this up working on a Debian system.My current kernel version is $ uname -r 2.6.32-27-generic.The problem is that my wlan card is not working any more such that my system freezes every time I enable networking with the hardware switch on my laptop.Therefore I bought a USB - WLAN stick and try to get this working.
Network Manager has the option "enable wireless" greyed out if I disable the hardware switch.If I enable the hardware switch and remove the module of my wlan CARD before (modprobe -r iwl3945) it says "wireless disconnected" for all networks.
View 1 Replies
View Related
May 1, 2011
anybody out there with an idea for a command to make the WLAN-Printer (HP-Officejet)work again when it stops after 30 Min - 2 h.Simple stopping the print job and print again does not help. The only way for me is to stop the print job and RESTART. Then it works again 30 Min- 2 h. I use updatet lucid lynx 32.
And I need a command like "killall pulseaudio" that I need when I return from logged-on as the second user to get sound again.
View 1 Replies
View Related
May 28, 2010
I have this output from lspci
Code:
04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
07:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
when i try configure using network manager, i can not connect to wlan, my AP using WPA-PSK
View 7 Replies
View Related
Jan 12, 2010
I have just installed Ubuntu 9.10 on an Acer TravelMate 290E. I've got internet connection through the Ehternet Cable, but when I plug in the D-Link WLAN USB device, although the system recognises it, it is disconnected. How can I connect the WLAN USB device adn get it to work?
View 5 Replies
View Related
Jan 16, 2010
my network was a dream to set up under ubuntu 9.10. all i had to do was enter pass key, then that was it. Works brilliantly.
Different matter with studio. The thing I notice in network connections is, it doesn't want to retain my pass phrase, if I go back into properties the phrase is blank. As far as I can tell the wireless card has been reconcognized and is communicating with router.
My system is: asus p5ql-vm epu, intel core2 duo 2.8 e7400, 4gb 1067 ddr2 ram, belkin f5d7050 v4000, edimax router.
Here is the info requested in the sticky:
kevin@ubuntu:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 003: ID 045e:00dd Microsoft Corp.
Bus 008 Device 002: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
code....
View 3 Replies
View Related
Feb 21, 2010
On my HP TX2500 laptop, dual-booting Vista and 9.04, Ubuntu installation found the WLAN and it works fine.I installed VirtualBox with Vista as the host and 9.04 as the guest. Wired Ethernet works fine but it didn't seem to find my WLAN. What more do I need to do?
View 1 Replies
View Related
Mar 29, 2010
I am new to using ubuntu. I am trying to play with my WLAN by changing its modulation, power, bitrate, channel etc. When I am trying to change the modulation type i had an error like this # iwconfig wlan0 modu 11g Error for wireless request "Set Modulation" (8B2F) : SET failed on device wlan0 ; Operation not supported. so i checked for different modulation types my WLAN supports this produced an error like this.
# iwlist wlan0 modulation wlan0 unknown modulation information. I even cannot access the power types my WLAN supports. I am using Intel wireless wifi link 5100. change the modulation type and power for my WLAN?
View 3 Replies
View Related
May 23, 2010
I have a desktop and laptop both running ubuntu 10.04. I have them going through a wireless router, the desktop is wired of coarse. I installed just about all the samba packages in synaptic that have the little ubuntu symbol next to them on both desktop and laptop except the Kde and document packages. I installed the two necessary packages to enable personal file sharing to work. But I can't seem to access files back and forth from these computers.
View 5 Replies
View Related
