Ubuntu Networking :: WLAN-Printer Works A Little?

May 1, 2011

anybody out there with an idea for a command to make the WLAN-Printer (HP-Officejet)work again when it stops after 30 Min - 2 h.Simple stopping the print job and print again does not help. The only way for me is to stop the print job and RESTART. Then it works again 30 Min- 2 h. I use updatet lucid lynx 32.

And I need a command like "killall pulseaudio" that I need when I return from logged-on as the second user to get sound again.

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: Wlan Won't Work In Studio 9.10 But Works In 9.10?

Jan 16, 2010

my network was a dream to set up under ubuntu 9.10. all i had to do was enter pass key, then that was it. Works brilliantly.

Different matter with studio. The thing I notice in network connections is, it doesn't want to retain my pass phrase, if I go back into properties the phrase is blank. As far as I can tell the wireless card has been reconcognized and is communicating with router.

My system is: asus p5ql-vm epu, intel core2 duo 2.8 e7400, 4gb 1067 ddr2 ram, belkin f5d7050 v4000, edimax router.

Here is the info requested in the sticky:

kevin@ubuntu:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 003: ID 045e:00dd Microsoft Corp.
Bus 008 Device 002: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
code....

View 3 Replies View Related

Ubuntu Networking :: Wireless Not Recognized Although WLAN Works?

Aug 11, 2011

I have a Dell Laptop which worked very well also with the wireless card. In fact the wireless card was never an issue and worked straight out of the box. However it has lost the ability to detect the wireless networks. I have plenty of networks in my area and my little netbook shows them nicely. So did my Dell laptop in the past. But now the Dell laptop shows no scan results at all although the card seems to be up and running (see terminal output below) I have to add that I had to compile a module for the WIRED network card which works excellent I always use and used a wired network and cannot say when the wireless card stopped to work PLUS I had a faulty harddisk which was replaced by Dell recently so there could be also a hardware fault since then because the laptop was opened by the service people. And yes the wireless is switched on in the BIOS If I create a wireless network with the laptop the netbook can see it, so the wireless card is broadcasting

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Network Hp Printer Works But Scan Doesn't O2 Rtr Firewall?

Feb 3, 2010

i have a hp 6500 e709a printer. have configured for network printing and would like to use the scan facility.i have tried to scan from the printer but it does not find the computer. the hp documents mention advanced firewall information on incoming udp ports and tcp ports etci believe it is with my machine as my son has a windows box with the hp software and i have managed to scan from that machine.

View 4 Replies View Related

OpenSUSE Wireless :: WLAN USB Works With 11.3 But Not 11.4?

Apr 18, 2011

While it worked out of the box in 11.3, openSUSE 11.4 does not recognize my TP-Link TL-WN821N any more.

Googling a bit, apparently the old ar9170 driver is deprecated and supposedly a new driver carl9170 is integrated in the kernel now, but since it is not working this cannot be quite right.

Unfortunately, I do not understand much of the instructions given at the above two URLs: Should I try to install the old ar9170 driver? If so, I found older, pre-11.4 posts here that seem to indicate that is not so simple as just copying a firmware file somewhere, so how can I install it in openSUSE 11.4? Or should I rather try getting the new carl9170 to work? If so, how can I do this if it is already supposed to be part of the kernel?

The 11.3 Net-Install (from CD) recognised that USB-WLAN-Stick all by itself, installing 11.3 just fine through the air. With 11.4 it didn't work. So I borrowed a WLAN bridge for a couple of days and installed 11.4 now (32bit plain install plus Packman), but even after the install, plugging in that Stick does not do anything.

View 9 Replies View Related

Ubuntu :: Printer Works With Few Applications Only?

Feb 11, 2011

I am on Ubuntu 10.10 on Thinkpad T61p

Recently installed my office printer with the drivers provided by them(office people)

The problem is that it works fine but only with few selected applications

Adobe Reader works fine Foxit reader fails Document viewer and image viewer prints the page but doesn't fit them inside the margins and they are either cut on the edges or look ugly

Printing from browsers doesn't work either. I always have to do 'print to file' in pdf format

Then pray rigorously that the pdf print is nice and then print using Adobe reader

where to start debugging from ?

View 4 Replies View Related

Ubuntu :: Low Cost Laser Printer That Works Out Of The Box?

May 16, 2010

I'm looking for a low cost mono laser printer that just works under Ubuntu. I know that a general 'rule of thumb' is go with HP, but that doesn't seem to be the case with their low-end mono printers, as they use the XQX Stream Protocol instead of Postscript. The more expensive HP printers appear to work because they use Postscript.

View 3 Replies View Related

Ubuntu Installation :: Printer No Longer Works?

Aug 1, 2010

Have recently updated 10.04 with latest updates which included a new kernel and the printer no longer works. In-fact I can't even define the printer and I don't have a printer installed, the install script can't locate the printer on the USB. I have a cannon MP640.

I can print OK through windowsXP on virtualbox, printer is found OK.

Everything was fine until latest update.

Also my USB TV card doesn't work anymore, it also was OK before the update.

View 8 Replies View Related

Hardware :: HP Multifunction Printer That Works Well Out Of The Box?

Jan 14, 2011

I am looking for a HP Multifunction Printer that works well out of the box with Linux. I have been to the printer tables and seen the host of HP printers that work, but I would like to hear from someone who has recent experience.

View 2 Replies View Related

OpenSUSE Hardware :: Printer Only Works For One Page?

Jul 29, 2011

Tonight I bought an HP LaserJet 1020 on Craigslist. Installed it and printed a test page without any trouble. But when I try printing a multi-page document, it only prints the first page, and then I get a message saying it may be disconnected. It's not, but I waited a loooooong time and the successive pages didn't spit out.

View 9 Replies View Related

Hardware :: All-in-One Printer That Works With Xandros Debian?

Nov 22, 2010

I have Linux Xandros Debian software on my Asus Eee PC, and for 3 years now I have been trying to buy a Colour Scanner that works. It does not have to be a stand alone Scanner, it can also be an All-in-One. I have been told the HP has the most chance. However I bought a HP Deskjet F2280, that the salesman guaranteed would scan with Linux, but it did not. And never has. Is there anybody who also has Linux Xandros Debian and HAS found a scanner that works?

View 1 Replies View Related

Ubuntu :: Hp 4000 Network Printer No Longer Detected Still Works In Windows

Mar 8, 2011

for some reason, ubuntu cant see it anymore. so how to fix? windows still prints to this printer on the network. I deleted the printer in ubuntu and tried to redetect and now it says no printer at that address.

before I deleted it, I recall it saying something about the backend had failed?

View 1 Replies View Related

OpenSUSE Hardware :: Printer No Longer Works After Upgrading To V. 11.3

Nov 10, 2010

I upgraded my openSUSE 11.2 KDE to version 11.3, and now my Canon Pixma ip1800 Printer no longer prints. It appears to me that the upgrade may have removed one or more files that the printer needs, but I don't know.

View 6 Replies View Related

Slackware :: Wide Format Printer That Works Well With CUPs

Jan 31, 2010

My Canon S9000 wide format printer just died. I'm looking for a new one. Is there a wide format printer that works well with CUPs in Slackware?

View 8 Replies View Related

OpenSUSE Hardware :: Printer Works But Spits Out Pages Of Text?

May 17, 2011

I've recently decided to switch the first of four machines on my LAN from windows to Linux (PB I Media 1gb ram, 160hdd Intel Core2 Duo 6300 1.86ghz. After a couple of weeks distro hopping I have decided that I like OpenSuse 11.4.

I have an Epson Styus SX515w connected to my router via wifi. I googled the subject and downloaded this driver from the Avasys website. epson-inkjet-printer-stylus-tx550w-series-1.0.0-1lsb3.2.i486.rpm. I checked the documentation and my model is supported. So I installed the rpm from a local directory via Yast.

Then I go into Yast > Hardware > Printers, (I have to disable the firewall first so Yast can find the printer on the LAN.) The New Printer Config Wizard shows it as Model: Epson sx510w Connection: ipd:/192.168.2.4.515/PASSTHRU Description: Epson Epson Stylus SX510w. (mine is a 515w). Anyho, Yast cannot find any matching drivers. If I click "Find More" Yast finds Epson drivers but no for my model. I've tried different search strings too.

So my question is. How do I tell Yast to use the driver I have installed?

I checked in Yast > Software and it lists the driver as installed I also ran this command in terminal user@linux-rk0o:~> rpm -qi epson-inkjet-printer-stylus-tx550w-series-1.0.0-1lsb3.2.i486

The resulting output confirms the package is installed.

Code:
Name : epson-inkjet-printer-stylus-tx550w-series Relocations: (not relocatable)
Version : 1.0.0 Vendor: Seiko Epson Corporation
Release : 1lsb3.2 Build Date: Mon 24 May 2010 10:22:43 BST
Install Date: Tue 17 May 2011 02:06:35 BST Build Host: build

[Code]....

At the mo my printer works but spits out pages of text (looks like some kind of commands)

View 3 Replies View Related

Ubuntu Networking :: Can't Locate Printer Drivers In Network Printer Setup?

Oct 19, 2010

I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.

I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?

View 3 Replies View Related

Ubuntu Networking :: HP All In One C3180 Printer - Only Gets Recognized As A Printer But There Is No Way To Get It To Scan

Nov 21, 2010

I have managed to install ubuntu server and set it quite nicely to share my files and printers over my network. I have two printers, a Lexmark e232 and a hp C3180 multifunctional printer (i.e. printer+scaner+a copy function). I have no problem installing the Lexmark printer on my windows 7 computers on the network, however, the All in One printer only gets recognized as a printer but there is no way to get it to scan. I have been reading on the web about all in one printers but I don't quite understand what the issues are.

Is there a way for me to get the full functionality of this printer over the network? I think this wouldn't be a problem if there was some sort of software designed by hp that would allow me to add printers that are not directly connected to the computer (via usb) but are shared from another pc on the network.

View 7 Replies View Related

OpenSUSE Network :: No Wlan With FRITZ WLAN USB Stick N 2.4 On 11.2

Nov 27, 2009

There is no wlan0 interface when trying to run FRITZ!WLAN USB Stick N 2.4 on OpenSuSE 11.2, though it works fine on Fedora 11 and Mandriva Spring 2009.1. All 64bit. Contrary to Fedora and Mandriva, there is no need to compile the compat-wireless module ar9170usb for OpenSuSE 11.2 because the kernel is very recent and includes this driver. Kernel: 2.6.31.5-0.1-desktop The /var/log/messages gives this after I put the stick in the PC. At first it is seen as a mass storage device:

Nov 27 22:00:24 linux-3mwa kernel: [ 73.420755] usb 1-5.1: new high speed USB device using ehci_hcd and address 4
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540834] usb 1-5.1: New USB device found, idVendor=057c, idProduct=84ff
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540841] usb 1-5.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540847] usb 1-5.1: Product: FRITZ!WLAN USB Stick N 2.4
[Code]....

View 5 Replies View Related

Fedora Networking :: System-config-printer Bad Printer Entry?

Dec 26, 2009

I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)

I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.

View 3 Replies View Related

Ubuntu Networking :: Wlan Web Authentication?

Feb 6, 2010

At my workplace the wireless connection is open but once you connect you first need to authenticate on your browser to be able to use the internet.On Windows as soon as I open whatever page I get the login request.On Linux I open firefox but nothing happens, just get the usual error page like if I had no connection. The IP's I get as well as DNS seem ok, I even tryed to match them up with windows.I tried a lot but can't get to the login page.

View 3 Replies View Related

Ubuntu Networking :: Which Is The Best WLAN PCI-card In 10.04

May 23, 2010

specific Ubuntu supported WLAN PCI-cards? This link shows a list of supported PCI-cards, but which is best: [URL] And the installation needs to be easy! I�ve tried installing these PCI-cards in my computer, useing Linux drivers, NdisWrapper, etc. Unforutately without any success:

- DWL-G510, Ralink Chipset, Ralink RT2561/RT61

- Realtek Semiconductor, RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller

View 1 Replies View Related

Ubuntu Networking :: No WLAN Interface On 11.04?

Apr 29, 2011

Today I upgraded from 10.10 to 11.04. After accidentally turning off the computer during the upgrade, booting into recovery mode, remounting the file system as writable and finishing the upgrade, it worked just fine.

However, I can no longer use any wireless networks. Wired ethernet works fine, but the wireless inteface won't even show up when I run ifconfig. When I first installed 10.10, it worked instantly and I was able to use it during installation.

I have an HP Compaq nx7300 laptop with a Broadcom BCM4311 network card.

View 1 Replies View Related

Ubuntu Networking :: 11.04 LAN And WLAN Disappeared?

Jun 12, 2011

I installed 11.04 to ASUS Z9200 Notebook, at first all was fine at least 10 minutes, LAN, WLAN worked ok, but suddenly all is gone, restarted few times -nothing. reintall-nothing...here is some info....any ideas?

mm@mm:~$ sudo lshw -c network
[sudo] password for mm:
*-network:0 DISABLED
description: Ethernet interface
product: 88E8001 Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Wlan Has Stopped Working?

Jun 30, 2010

I have a Thinkpad T400 notebook that dual boots windows 7 and Ubuntu 9.04. My wireless has worked both in windows and ubuntu for the past several months. However 2 days ago, the wireless in ubuntu stopped working. I think this may be a result of trying to set up a static eth0 connection between my laptop and an embedded board, but I dont see how messing with eth0 would stop the wlan from working.

Symptoms: When I left click on the network connections icon in the tray, all it lists under "Wireless networks" is "device not ready". Needless to say, there are no networks available to connect to. Also the wireless is working fine under windows.

[Code]...

View 1 Replies View Related

Ubuntu Networking :: How To Deactivate Wlan Card

Aug 10, 2010

I have bought a new laptop with win7 on it , I delete win7 and install ubuntu64 everything is ok but my wireless card won't work ( it is recognized) and even I can connect to INTERNET but nothing is download or upload so I have bought another usb wireless card but now when I connect this new card to my laptop it still tries to use the old one and so I could not connect to internet

View 4 Replies View Related

Ubuntu Networking :: Connect To WEP WLAN Without DHCP

Aug 18, 2010

I am trying to connect to a WEP encrypted WLAN without using the DHCP server of the AP. (=giving myself a static IP)

So far i have tried:

Code:

But i cant even ping 192.168.1.1 (Network unreachable error). Is it possible that Ubuntu tries to use eth0 (which was connected to a similar /16 before) to ping 192.168.1.1 or is there somethign wrong with my commands?

Also will an AP allow access to the network although i don't have an IP from its DHCP server?

View 3 Replies View Related

Ubuntu Networking :: Wlan Connected But Can't Go To Internet

Sep 2, 2010

I can connect my wlan card to router (gateway) ,but I can't go to internet, pinging my router (and everything else) also falied. Same problem was with knoppix but with help of others i solved it modifing etc/reslove.conf IP address to my gateway (nameserver). At ubuntu resolve.conf seems ok, as there is already IP address of my gateway?

View 6 Replies View Related

Ubuntu Networking :: Wlan Not Ready With Firestarter

Nov 8, 2010

All I want to do is share my internet connection that comes through the eth0 cable to my wlan0 wiki card. Firestarter seems the convenient tool for doing this. BUT it keeps telling me wlan0 not ready. The card is connected correctly and network-manager does see incoming signals.

View 1 Replies View Related

Ubuntu Networking :: Wlan Card Is Not Working Any More

Dec 25, 2010

I'm a new user of Ubuntu and I think I need some help but let me mention before that I got this up working on a Debian system.My current kernel version is $ uname -r 2.6.32-27-generic.The problem is that my wlan card is not working any more such that my system freezes every time I enable networking with the hardware switch on my laptop.Therefore I bought a USB - WLAN stick and try to get this working.

Network Manager has the option "enable wireless" greyed out if I disable the hardware switch.If I enable the hardware switch and remove the module of my wlan CARD before (modprobe -r iwl3945) it says "wireless disconnected" for all networks.

View 1 Replies View Related

Fedora Networking :: Cannot Use WLAN In 13

May 28, 2010

I have this output from lspci

Code:

04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
07:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)

when i try configure using network manager, i can not connect to wlan, my AP using WPA-PSK

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved