OpenSUSE Wireless :: OS11.2 Installed But WLAN (Atheros5212)?
Jan 15, 2010
After been convinced by an exchange student from Nashville I am hosting here in Germany I went into openSuse 11.2. I installed and got openSuse 11.2 to work. I must admit, that I was very impressed. It is more than 10 years that I tried a UNIX system and Linux was quite a cryptic thing. First some additional drivers had to be installed to get MP3 to play. However Internet access was possible with cable but the system failed in recognizing the WLAN.
Here is my system:
HP Compaq nc4000
OpenSuse 11.2 (i586)
KDE 4.3.1 "release 6"
Wireless Network
Atheros AR5212
I have looked through some posts but must admit, that I did not understand much of that. I Am willing to learn, however I do not see myself compiling some drivers. If you could tell me which URL could be used for dloading or installing via Yest, If more sophisticated solutions, than I will have to ask my student to do it for me, but he should learn German and learn more about German lifestile in German Bars.
View 1 Replies
ADVERTISEMENT
Jan 2, 2009
Is there any possibilities to make Creative HS-1200 wireless headset to work in OS11.1?
It shows up in Mixer panel, but i cant in any way configure it or make it work. It seems its been detected in some way, but i Yast-Sound it doesnt show up. Only in KMix.
View 3 Replies
View Related
Dec 19, 2009
i just installed a new wireless device from encore electronics(802.11g Wireless PCI Adapter ENLWI-G2) but it deadlocks openSUSE 11.2 when i start the networking module in YaST. It also deadlocks(Freezes up) when i tried reinstalling suse. can someone help me, has anyone got this device to work? I also tried Fedora 12... it manages to see my wlan and posts the mac address of the card.. but it also locks up while trying to use it or configure it
View 9 Replies
View Related
Jul 3, 2010
I have a Broadcom B4312(I believe) wireless card and installed the drivers for it, but under the Wireless tab in Network Connections, it doesn't show "wlan0" or anything similar to "eth0"(which it shows under "Wired"). I ran iwconfig and this is what I got:
[Code]....
View 9 Replies
View Related
Dec 25, 2009
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
View 7 Replies
View Related
Jul 8, 2011
I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[code]....
View 9 Replies
View Related
Apr 11, 2010
yesterday i set my thinkpad t43p up with open suse, but i need to install my wlan...
i can't find the 12key big no to connect to my DSL telephone connection...
View 3 Replies
View Related
Apr 18, 2011
While it worked out of the box in 11.3, openSUSE 11.4 does not recognize my TP-Link TL-WN821N any more.
Googling a bit, apparently the old ar9170 driver is deprecated and supposedly a new driver carl9170 is integrated in the kernel now, but since it is not working this cannot be quite right.
Unfortunately, I do not understand much of the instructions given at the above two URLs: Should I try to install the old ar9170 driver? If so, I found older, pre-11.4 posts here that seem to indicate that is not so simple as just copying a firmware file somewhere, so how can I install it in openSUSE 11.4? Or should I rather try getting the new carl9170 to work? If so, how can I do this if it is already supposed to be part of the kernel?
The 11.3 Net-Install (from CD) recognised that USB-WLAN-Stick all by itself, installing 11.3 just fine through the air. With 11.4 it didn't work. So I borrowed a WLAN bridge for a couple of days and installed 11.4 now (32bit plain install plus Packman), but even after the install, plugging in that Stick does not do anything.
View 9 Replies
View Related
Jan 20, 2010
on kde4 with knetworkmanager I cannot get past the wep security key on my home router. Every other wlan works, ethernet works, settings are definitely correct because it works with windows, other computers.And on the same computer even with gnome networkmanager! Also it used to work fine earlier. Behavior the same with different users including root, regardless of using kwallet or not. Networkamanager tries to connect and after one or two minutes throws the setting window back at me. I uninstalled and re-installed and deleted all related files I could think of. I even tried a complete fresh installation of opensuse only keeping the /home partition, so the problem must be lying there I guess. But then why all users?
PS opensuse 11.2
kde networkmanager 0.9.svn1043876-1.1.1
View 1 Replies
View Related
Aug 19, 2010
after I upgraded from opensuse 11.0 to 11.3 the wlan doesn't work anymore. following the rules, how to post the trouble. I also updated the correct FW. What's wrong? packet missing?
Code:
# lspci
...
03:00.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
# dmesg
[code]...
View 9 Replies
View Related
Sep 12, 2010
I installed OpenSUSE 11.3 with disabled WLAN (otherwise the installation process didn't start). Now the system boots only in Safe Mode with enabled WLAN card (when the WLAN card is disabled it also boots in normal mode though). But even if I try to configure the WLAN card in Safe Mode, the system doesn't boot next time (in Safe Mode) until I add "brokenmodules=ssb" parameter. As I understand after reading this forum I should install a firmware/driver, but there is no install_bcm43xx_firmware script in /usr/sbin directory.
[Code]....
View 3 Replies
View Related
Jun 3, 2011
Linux is what i'd like to learn, so Howdy to all and i hope to speak to you all regularly
in short, I started with Ubuntu Linux about 6 months ago, Didn't like it, i researched various distro's and came across, PC Linux OS, it was really cool, But i couldn't get it to connect Wirelessly, so i tried something else... the bottom line is i finally settled on SUSE Linux Enterprise Desktop 11, i seem to like it a lot.Ok.. now that introductions are out of the way
Background info: I've installed SUSE Linux Enterprise Desktop 11 on my Sony Vaio Laptop (VGN-NW15G) with no major issues, after a bit of mucking around, i got the LAN to Connect to the internet, after some more mucking around, i figured out how to get the WLAN to connect to the internet.MY Goal: To be able to Wirelessly Network my Laptop with My PC.so that i can access the files on the PC, From my laptop, and Vice Versa, but the important thing is to first be able to access the PC files from the Laptop.
NOTE: My PC has 4 Hard Drives (1 for the O/s, 3 Backups) they are all configured and Shared correctly for Networking and Wireless networking, and all the permissions are set correctly.Hardware and Software Environments:My Laptop : Sony Vaio VGN-NW15GOperating System : SUSE Linux Enterprise Desktop 11Wireless Capable, and has no issues Wireless Networking when running of a Hard Drive Loaded with Win 7 Ultimate 32bit, Therefore all Hardware is Compatible
My PC (Custom Built)
Operating System : Windows 7 Ultimate 64bit SP1
Motherboard: Gigabyte GA-X58-UD3R Rev1.0
[code]...
View 4 Replies
View Related
Jan 17, 2010
I have installed open SuSE 11.2 and would like to use my Fritz ups Stick.
I have read a couple of threads about this issue and I do not know if I can follow those solutions presented for oS 11.0 and earlier versions.
View 8 Replies
View Related
Feb 17, 2010
Under OpenSuse 11.2 i cannot connect to my wireless network. Sometimes computer doesn't see network, sometimes computer cannot connect to it. Encryption: WPA & WPA2 Personal Kernel driver: ath5k Also I am embarrassed that in lspci and yast written various models of my wifi adapter.
Code:
linux-ra0h:/home/miksayer # lspci | grep "Wireless" 01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
View 9 Replies
View Related
Mar 6, 2010
I have installed opensuse 11.2 on a second partition, with the ultimate aim of leaving windows altogether. Unfortunately, I seem to be having terrible trouble (as do many others) getting my wireless internet connection working. I have viewed lots of posts in these forums and done everything I can think of, but since I am a linux novice, am unable to identify the problem. The card is working, since it can identify local SSIDs, it has been set up (to the best of my knowledge) correctly in YAST, but nothing seems to work.
I'll include some information I have recorded from my system.. I typed the commands below with the accompanying output listed:
[Code]....
View 2 Replies
View Related
May 1, 2011
I just installed version 11.4 on my system of a toshiba satellite l505d-es5025 64bit.My wlan will not show up at all.I installed ndiswrapper, and all of the wlan from yast.
View 2 Replies
View Related
Feb 9, 2010
since if read all the forums threads, faqs an tutorials i could find, i hope to find some help here.
i just installed openSuse 11.2, KDE 4.3.1 a fews days ago to see what's it all about. i don't have any experience in writing code or anything besides the few little commands i've learnd through my research. the system is running on an old laptop (amd64 3000+) with enough RAM and HD. now i since my wlan-card is detected but won't work due to missing driver i tried this ndiswrapper-method. i used the ndis-version that was included in the openSuse-dvd with no success, then i de-installed this version to try manually. i downloaded version 1.55 from the ndiswrapper-website, logged into the console as superadmin and followed the install-intructions and for intances this tutorial. now i'm even stuck with the "make"-command as the console tells me "If 'make' is not a typo. in earlier attempts while trying to install the wlan-driver through the dvd-given ndiswrapper version i often got the error "makefile:23: kernel tree not found..."
as the welcome-note for this forum demands here's some output from the console linux-g6rk:/home/mat/ndis # lspci -nn
02:09.0 Ethernet controller [0200]: Linksys, A Division of Cisco Systems [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01) [17fe:2220]dmesg|less [0.331220] aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support (i guess that's the line telling me that my wlan-card has no firmware as i found nothing else for that matter) i know there many threads about this topic but i've spend the last two days looking for answers and the stuff i found either didn't work or was explained so weird that i could make anything out of it.
View 2 Replies
View Related
Mar 13, 2010
I'm finding a hard time getting my wireless card to work, my laptop is a Dell Inspiron 1525 and this is all the info:
0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
0b:00.0 0280: 14e4:4315 (rev 01)
[ 8.375610] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 8.390374] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 6, Type 5, Revision 1)
[ 8.390436] b43: probe of ssb0:0 failed with error -95
View 9 Replies
View Related
Sep 26, 2010
I just want to report that I managed to get WLAN running on my Dell Mini 10 (Inspiron 1012) with OpenSuse 11.3 KDE.
This one contains a Broadcom 4312 WLAN card
Code:
lspci -vnn|grep Broadcom
07:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
0b:00.0 Multimedia controller [0480]: Broadcom Corporation Device [14e4:1615]
Subsystem: Broadcom Corporation Device [14e4:1615]
I just installed the broadcom-wl and broadcom-wl-kmp-desktop packages from the packman repository. Then there is a new entry in the bootmanager menu. Using that one, WLAN works fine.By the way: Can somebody explain me the difference between the broadcom-wl-kmp-desktop, broadcom-wl-kmp-default, broadcom-wl-kmp-pae, broadcom-wl-kmp-xen packages? I did not find any documentation about that.
View 3 Replies
View Related
Nov 12, 2010
I'm unable to get into my university's WLAN network. LAN works just fine, but sometimes it's quite convenient to be able to access stuff wirelessly. It doesn't seem to be a hardware problem, because if I configure my computer according to our computer department's instructions it works fine with Ubuntu (currently I carry around a stick to get into the Internet when I really need it and don't have a cable). Some info:
My device:
Broadcom WLAN controller on a Lenovo G560
My system:
OpenSUSE 11.3 64-bit
The drivers are installed, I can get into normal private networks, but have never managed to get into the university network except for with Ubuntu.
The university instructions tell me to use the following settings:
Security: WPA Enterprise
Authentification: TTLS
Inner Authentification: PAP
Username: My username
Password: Password
CA Certificate: Deutsche_Telekom_Root_CA_2.pem
In the KDE instructions, they tell you to write "anonymous" into the anonymous identity field, but in the GNOME instructions it says to leave it blank. In Ubuntu, I leave it blank and it works.
I've got the recommended settings, which also work in GNOME.
I'd ask the tech support here, but I am the tech support We've got it working with other systems, like I said, but not with SUSE, and I'm a SUSE fan.
View 9 Replies
View Related
Dec 12, 2010
just installed opensuse 11.3 on my asus eee pc 1018p and have severe problems to make the wireless network card work. tried to install the driver with ndiswrapper and b43-cutter, but without any success. ifconfig does not show any wlan0 device. below find output of
lspci -v
dmesg
ifconfig
installed opensuse on several notebooks/netbooks before but never ran into serious trouble.
[code]...
View 3 Replies
View Related
Mar 11, 2011
I'm having problems with wifi on my Dell Inspiron 1501. According to the specifications, it has a "Dell Wireless 1390 WLAN MiniCard". I could not activate the device. I have installed openSUSE 11.4 with GNOME.
View 2 Replies
View Related
May 8, 2010
i installed suse (KDE) on my old notebook and now I'm trying to get the wlan to connect to our router and can't figure out how to get it to work. My card seems to work, the network manager even finds the router, but i just cant get a connection. I followed the steps of the "Getting Your Wireless to Work" thread and these are the results:
[Code]....
- i messed around a bit with the network settings and might have cluelessly broken something (or broken it more)
- i tried a usb-wlan-card as an alternative, which didn't work either, but could possibly have messed things up even more.
View 7 Replies
View Related
Mar 21, 2011
Using tips provided in the "Sticky" posts, I have identified my wireless device -- BCM4322 -- and installed the necessary firmware and drivers. The device appears in Network Manager until system reboot, at which time the "ssd" driver module is loaded instead. After each boot I must execute the following commands to remove ssd and load the Broadcom driver:
rmmod ssb
modprobe lib80211
modprobe wl
The Broadcom README file provides directions to load the correct module automatically, but the commands appear to be incompatible with openSUSE 11.4. I'm happy to provide additional detail if needed
View 7 Replies
View Related
Nov 27, 2009
There is no wlan0 interface when trying to run FRITZ!WLAN USB Stick N 2.4 on OpenSuSE 11.2, though it works fine on Fedora 11 and Mandriva Spring 2009.1. All 64bit. Contrary to Fedora and Mandriva, there is no need to compile the compat-wireless module ar9170usb for OpenSuSE 11.2 because the kernel is very recent and includes this driver. Kernel: 2.6.31.5-0.1-desktop The /var/log/messages gives this after I put the stick in the PC. At first it is seen as a mass storage device:
Nov 27 22:00:24 linux-3mwa kernel: [ 73.420755] usb 1-5.1: new high speed USB device using ehci_hcd and address 4
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540834] usb 1-5.1: New USB device found, idVendor=057c, idProduct=84ff
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540841] usb 1-5.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540847] usb 1-5.1: Product: FRITZ!WLAN USB Stick N 2.4
[Code]....
View 5 Replies
View Related
Jul 30, 2010
Im about to get some support from Novell using Bomgar. Bomgar support SUSE, Ubuntu, Redhat, Fedore, but i can't find anything about OpenSUSE.
Anyone know if Bomgar work on OS11.3 64bits?
View 1 Replies
View Related
Oct 21, 2010
At the moment 'make' returns this:
Code:
./kernelversion.c:13:30: fatal error: linux/utsrelease.h: No such file or directory
compilation terminated.
Makefile.inc:81: *** Cannot detect kernel version - please check compiler and KERNELPATH. Stop.
I would do a little more homework, but I already did a lot only to get stuck here, and I need to solve this sooner rather than later.
I have already: installed devel and desktop-devel and given up about 350mb of diskspace to
Code:
zypper in -t pattern devel_C_C++
Only to still not have the make function available.
If that install was unecessary, I'm hoping there's a simple uninstall version of that line.
Reading what it's saying, it sounds like I may have all the right kit but it needs a nudge in the direction of the kernel??
View 3 Replies
View Related
Feb 18, 2010
I recently upgraded my SuSE 11.2 to KDE4.4 from "download.opensuse.org/repositories/KDE:/KDE4:/Factory:/Desktop/openSUSE_11.2/". Most things run fine, however the "Akonadi Control Center" does not appear in my KDE "System Settings". Akonadi itself seems to run, at least Contact uses it for the addresses.
I searched for all "akonadi" packages, but I didn't find ones which I do not have installed.
View 5 Replies
View Related
Jun 9, 2010
I am running OpenSuSE 11.2 64bit which was upgraded from 11.1. When I moved to OS 11.2, I found out the hard way about VMWare not working. Then tried to remove it and fix it myself.
When I try to run the config script...
Code:
parents:~ # vmware-config.pl
Unable to find the answer LIBDIR in the installer database
(/etc/vmware/locations). You may want to re-install VMware Server.
Execution aborted.
parents:~ #
When I try to install vmware-server
Code:
parents:~ # rpm -i VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed
When I try to upgrade vmware-server
Code:
parents:~ # rpm -U VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed
When I try to force install vmware-server
Code:
parents:~ # rpm --force VMware-server-2.0.2-203138.x86_64.rpm
rpm: only installation, upgrading, rmsource and rmspec may be forced
Other than rebuilding my box, how can I recover from this?
View 2 Replies
View Related
Aug 2, 2010
Has anyone succeeded in coercing either banshee or rhythmbox to play "restricted" media? On my 11.3 install, I have all the packages from the "one-click" install that takes 49 clicks to find on the new wiki structure ... Playback works correctly in mplayer, gnome-mplayer, and smplayer. VLC works also, ... yawn ....
This is the third consecutive release [COLOR="rgb(0, 0, 0)"](AT BEST)[/COLOR] where this stuff is badly broken! By badly broken, I mean that installing all the needed software and codecs does not appear to be the only requirement. I was able to get it working in 11.1 and 11.2, but only via a hit and miss series of un-install the packages, reinstall one by one ... making offerings of fatty sheep ... reinstalling again .... performing the second part of the ring cycle for the neighbours cat ... remove the codecs again .... install again ... wow ... it's working ... set the entire system to ro ... sing for the cat again!
Does anyone have any insight as to why gstreamer is SOOOOOOO foobared in OpenSUSE? Can anyone articulate a series of steps that will actually get the desired result? BTW, getting this stuff working in FC13 is trivial. Add the fusion repo and install the codecs! I remember a better day in SuSE land when one added the packman repo and installed the codecs ...
View 1 Replies
View Related
