Ubuntu Networking :: Connect To WPA2 Protected Network - Grayed Out
Mar 14, 2011
I just installed Ubuntu 10.04, everything is fine, but the wireless. When I try to connect to my WPA2 protected network, it is grayed out. SO I click Connect to Hidden Wireless Network, and this window pops up. I put in my network name, the security type, and password. It acts like it is connecting, the wireless icon is going up and down. But then another window pops up, saying Authentication required by wireless network and the down arrow is grayed out. Screenshot.jpg
View 2 Replies
ADVERTISEMENT
Apr 17, 2010
My college runs a WPA2 LEAP secured wireless network, and I am having problems connecting to it under Ubuntu. I can connect to it just fine under Windows, just not under Ubuntu. Under Ubuntu I can connect to other networks such as my home WEP secured wireless network, so it shouldn't be a hardware or driver issue.
When I do connect to the WPA2 LEAP network it recognizes the network and tries to connect, it pops up the login box for me to enter my username and password, but after I click connect it pops back up again about 10 seconds later. It pops up like this about 3 times total, then after the third time it stops trying to connect and the Wireless Network Disconnected message is shown.
View 1 Replies
View Related
Nov 16, 2010
Im trying to connect to my wireless network via terminal. My wifi network has a WPA2 encription. Im running ubuntu server 10.04. wifi interfaces are active, i can "see" my network with airodump. The only thing is i dont really know how to configure my iwconfig to connect to it.
View 2 Replies
View Related
May 9, 2009
O currently have 2 USB WiFi adaptors: a Linksys WUSB54G v4 and a D-Link DWA-110. Both these USB adaptors worked extremely well in Windows: they could connect to any network: unsecured, WEP and WPA1/2I have tested these adaptors in DreamLinux, OpenSUSE and Mandriva: in these 3 distributions, i could use both adaptors to connect to my home's WPA2 network.Both adaptors also work well in Fedora 10.In Fedora 11 Alpha though, its a different thing: only the D-Link is able to connect to the home WPA2 network. My Linksys WUSB54Gv4 can 'see' the network, but when i enter in the WPA2 key, it takes forever to try to negotiate a connection before timing out and disconnecting.
View 3 Replies
View Related
May 30, 2010
I have a problem with my RT2860 in my Eee PC 901 running F13. It connected fine in F12 when I installed the akmod-rt2860 driver. I enter my WPA key, then it tries to connect, but the WPA key screen appears again saying that I may have typed in my WPA key incorrectly. However, I checked and it is the right WPA key.
View 5 Replies
View Related
Jul 5, 2011
I keep getting a "bad password" error message when trying to connect via wpa_supplicant to a wireless network (Apple Time Capsule WPA/WPA2 mixed).
Here's my wpa_supplicant.conf:
Code:
And the relevant line in the /etc/network/interfaces file:
Code:
The Time Capsule log contains the following error message--
Code:
So perhaps the password is somehow getting lost in translation from Ubuntu to the Time Capsule?
View 9 Replies
View Related
Jul 27, 2010
how can i connect to the wireless network(WPA/WPA2)? i dont have network manager,so help me with terminal. i download wpasusclinet,but help me from first.
View 8 Replies
View Related
Aug 31, 2011
I have a laptop (running Arch Linux) and a desktop. Until recently my desktop computer ran Arch but I'm taking Debian for a spin now. At my home there is a wireless network with WPA2 encoding. I use the wicd gui to connect to this. I assume, that since I can see the SSID in the wicd window, all drivers are correctly installed and functioning. On my Arch computer, wicd reports this SSID as having WPA2 encoding, but on the Debian computer, it shows up as WEP. Even when I choose the correct encryption thing, WPA2 (preshared key), and put the correct password in, I can't get a connection up.
View 6 Replies
View Related
Apr 8, 2011
I recently installed KDE and just found that it cannot connect to my school wireless which uses WPA2.
It keep asking Secretes for , even after I input everything correctly. It works fine with not secured wireless.In Gnome there was no problem with connecting to this wireless service.
View 9 Replies
View Related
Aug 23, 2011
I have BCM4312 Dell wireless 1397 WLAN mini-card.I run Code:sudo /usr/sbin/install_bcm43xx_firmware to install a firmware and know I managed to see all the networks I have around me, but I can't connect to any of them (using the correct password).
View 8 Replies
View Related
Dec 20, 2010
I have had my network setup and working with WEP for a long time. Also Windows 7 is working fine from the same laptop. I can't figure out why the essid is scrambled. Here is the output of iwconfig:
[Code]....
View 6 Replies
View Related
Jan 17, 2010
my wireless just stopped working. the network manager in my panel no longer allows me to enable wireless. the option to enable wireless is there, but it is grayed out and will not let me connect. i reinstalled my wifi driver but it didnt change anything. iwconfig shows that the card is working why is the network manager not?
View 7 Replies
View Related
Apr 9, 2010
I'm having problems while trying to connect to protected wireless network using iwconfig(8).
When I type in:
Things work ONLY if i DON'T input some numbers after the s: but my actual passkey has numbers.
It outputs this as an error:
my configuration(ThinkPad R61i):
View 8 Replies
View Related
Apr 22, 2010
[url] I have just had a similar problem.
No network, and dhclient command allowed the machine to lease an ip address from the dhcp server. Networking capability back.
EXCEPT that Network Manager is still greyed out as unmanaged, and right click still gives Network Management Disabled.
Wonder what's going on with Lynx and NM?
View 3 Replies
View Related
Oct 13, 2010
Unsecured and WEP networks are fine. I do not have a WPA network to test on, but my school's WPA2 Eduroam network does not work. It tries to connect before asking again for my credentials, and this repeats. I'm on 64-bit 10.10 Ubuntu upgraded from a live CD install of 10.04. Laptop model is Acer Aspire 5741-5193. Output of lspci:
Code:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
[Code]...
View 9 Replies
View Related
May 8, 2010
After installing Lucid, I noticed that my Ralink RT2860 card would not connect to my home network using WPA2 despite the network being visible and of good strength. So I followed the guide at [url] in order to install the newest Ralink drivers.
After installation, same issue. That is, the card will connect to my a/b/g/n network if I leave it unprotected, but it will not connect to the same network if switch it to WPA2. After being given the passphrase, the wireless icon on the indicator applet shows that it is trying to connect, but after awhile it fails. Does anyone know why the built-in driver and also the official Ralink driver are no good for WPA2 in Ubuntu 10.4 for my RT2860 card?
View 9 Replies
View Related
Jun 24, 2010
I updated to the latest version of Ubuntu and before I could connect to the network "krafft" that is a WPA2-Personal protected network.If I go into Windows and change security to none I can connect with Ubuntu, but not when it's protected.After a bit of time logged in without network a dialogue pops up and looks almost like this :but "Focus" is replaced with "krafft" and the password is something else.I know that the password is right and the network worked perfectly before update.I got an USB wireless network receiver from D-Link and the chipste is ralink rt2870.In the previous Ubuntu distribution you had to write "blacklist rt2800usb" in /etc/modprobe.d/blacklist.conf but it won't work with or without that blacklist.When I updated I saw some message about the network manager(at least I think so) so maybe the problem is in that.
View 4 Replies
View Related
Dec 27, 2010
I have xbmc, a media center shell that runs on ubuntu. I am trying to set up a laptop to run it and be a full time media center. so far it works great, I installed xbmc live, but the only issue is I have a wep2 protected wireless router and the wifi does not connect automatically.
I have it set up and am using wpa_supplicant once those commands are run the wifi works great.I am a novice in linux in general, and can not seem to get this to work on startup, can anyone point me in the right direction on this? I haven't been able to find the xbmc start up script if one exists, I figured adding those lines to it might work,does this sound like a reasonable approach? if anyone knows where that is and how it is defined to be launched on start-up i would appreciate it(I guess this is getting into the general Linux knowledge but still good info)
View 2 Replies
View Related
Jul 24, 2010
Well I recentelly read some tutorials about "cracking" wep networks, and seems like it's kind of easy ( I Haven't tried'em out since I don't have my laptop right now, but i'll try them as soon as i get it back )So i'd like to change my network protocol to wpa2, but I REALLY GOT NO IDEA on how to do this.Does someone knows about a tutorial on how to do this?
View 5 Replies
View Related
Mar 10, 2009
I'm running Fedora 10. My Network Manager settings are all grayed out. They are uneditable. I can see the detected settings, but not change them. All of the settings fields are disabled.
Is there a way to enable these, so that they can be edited?
Starting with the menu in the upper left corner of the GNOME screen: System/Preferences/Internet And Network/Network Connections
The Network Manager window appears correctly.
I see all automatically generated settings that were created for my various devices:
In particular, I want to be able to edit "Auto vmnet8", for VMware usage.
I know about the workaround of going back to the manual network configuration as used in older versions of Fedora, such as editing the files in /etc/sysconfig/network-scripts/ifcfg-* and then enabling the old "network" service and disabling the "NetworkManager" service.
However, this workaround really won't work in this situation. The VMware interfaces, vmnet1 and vmnet8, are virtual interfaces that *only* exist when the VMware services are running. The VMware services are started *after* the old manual network configuration would be applied. So, at the time the scripts in /etc/sysconfig/network-scripts are processed, the vmnet1 and vmnet8 devices do not yet exist! I'm hesitant to change the numbering of services, lest other things break (VMware on Fedora 10 is rather fragile already).
I love the feature of NetworkManager to be able to automatically apply settings to newly materialized network devices (such as vmnet1 and vmnet8 when VMware is loaded). However, I need to also be able to edit those settings.
Is there a solution that will make my Network Manager "Edit" window not be entirely grayed out? I can see the settings pages just fine, but unfortunately, they are all disabled and I can't edit them at all.
View 11 Replies
View Related
Dec 17, 2009
My MythTV box has two interfaces:
A 10/100 Ethernet interface built into the motherboard. (Recognized as eth0)
A USB wireless dongle. Linksys, I believe. (Recognized as wlan0)
Both of these were working fine under FC8.
I recently performed a full reinstall, using Fedora 12.
Both network devices are recognized. I can configure them, using the Network Devices GUI that comes with KDE.
In the case of the wireless device, I entered all of the required information. (Copied in from the FC8 settings.)
Here's the problem. Whether I'm the root user or not, the "Enable" button is grayed out.
Any ideas? I had *no problem* with this device under FC8. The hardware "I see you" messages in /var/log/messages don't suggest any problems. I'm not leaving out any setting information.
View 1 Replies
View Related
Mar 26, 2010
In my toshiba m900 with realtek wireless lan. i canot detect any network. should i see any network? i setup my access point using wpa2 in windows. how about the ubuntu 10.04? i mean do they support wpa2 and wireless issues?
View 9 Replies
View Related
Nov 10, 2010
I've recently installed Lucid Lynx 10.04 on my Dell Studio which uses an internal BCM4315 wi-fi card to connect to the internet. I was hoping it would work upon the install, but deep down I knew I'd have to tweak it a little bit to get it up and running the way I wanted. The card was instantly recognized but, at first, wasn't detecting wireless networks. This was quickly and painlessly fixed using System > Administration > Hardware Drivers, which I used to install Broadcom B43 wireless driver (b43-fwcutter). I rebooted and could not detect the local wireless networks.
I entered my password to my home network (correctly, I quadruple checked) but, unfortunately, it continuously tries to connect to the network with no successful. Occasionally I'm prompted to re-entered the password and the process repeats. The network I'm trying to connect to is a WPA/WPA2 network which I've heard to be troublesome. I haven't yet tried connecting to a WEP network but I'm fairly certain it will work and I will get back to this post when I test it in a few hours.
I'm curious if this question has been answered or if the problem has been solved and I just simply don't have the google skills to find it.
[Code]...
View 3 Replies
View Related
Sep 1, 2011
In setting up wireless connections I have ran into an array of problems. First, when I installed the new OS on my laptop I had to get the correct drivers and firmware for it to display and connect to any connections, had no problem here connecting to a secure wireless network (WPA or WPA2). I then installed Ubuntu on my desktop and had to find the correct driver for the Netgear WNDA3100v2 USB adapter, got it all installed with the Windows Wireless Drivers tool or w/e it is. This made all the available connections come up. I tried connecting with the WPA password I was given for the network and will not connect.
I had the guy managing the network change the one I connect to, to a WEP Passphrase Shared Key thinking this would solve my issue, still nothing. And also in doing so, now my laptop will not connect to the wireless network using the Passphrase. I do not want to go back to Windows, and I will be getting rid of my Lan connection soon so i need a solution to fix this wireless connection problem.
View 9 Replies
View Related
Nov 30, 2010
i have installed fedora12 in my compaq laptop.i am under proxy..i just gave the local ip address to the laptop..and try to activate the etho device..but ..all the activate,deactivate,delete buttons are grayed out..they are completely looking dead..
View 2 Replies
View Related
Apr 1, 2010
I've been having a network problem that I've been able to temporarily solve by rebooting the router, but even that can be shaky at times, and it can sometimes disturb others' internet activites, so I'd really like to tackle this while I can. I had an old thread about this, but it's ancient history by now, and plus which, I've got a bit more Linux experience and patience than I did before.
The basic problem is that NetworkManager will associate and connect to my home wireless network, but a) it won't let me ping the router or anywhere else ("Destination Host Unreachable"), and b) the connection lasts for maybe a couple minutes at most. If I reset the router, however, 9 times out of 10 it will associate and connect successfully and I can get online, but I have to run a constant ping to the router with a 10-second interval, otherwise it drops the connection, unless I'm doing a lot of other heavy network activity.
ping 192.168.1.1 (the router):
Code:
I've tried wpa_supplicant, but this is what I get (it's apparently unsuccessful...? ESSID/MAC addresses censored where necessary):
Code:
The last prompt line is included because I cancelled it myself; it didn't abort on its own. If left unmonitored, it basically keeps doing this over and over, with no visible network activity at all.
With NetworkManager, I can keep selecting the network's ESSID over and over, and it seems to reconnect, but I still can't ping out anywhere. I'm using a Netgear WN111v1 wireless adapter with ndiswrapper and the Windows drivers. I have no idea what the chipset is, and I doubt that Linux drivers exist for it, even if I knew what it was. The router is using WPA2 security (hence my trying wpa_supplicant)
lsusb:
Code:
ifconfig wlan0 (while connected; IP/MAC addresses censored where needed):
Code:
ifconfig wlan0 (while not connected; IP/MAC addresses censored where needed):
Code:
Code:
I only include this for format checking purposes. The commented out "psk" is the actual text passphrase, while the uncommented one is (presumably) a hex representation of the same key. Is this correct? I've never done this with wpa_supplicant before, I've only used NetworkManager (which is a pain in the @$$ because it requires X to run, and so it disconnects any time I log out/back in ).
Is there any hope of getting my wireless connection permanently working, so that I don't have to reset the router every time I need to reboot or log out/back in?
View 15 Replies
View Related
May 6, 2010
I've just switched from xub to lub, and I must say it's a lot lot faster. There's just one really annoying problem (I have no idea if this is in any way related to LXDE or if it's just due to 10.04): Network Manager only starts about a minute after the rest of the desktop. So my system boots up, I log in, see the applet, but it is greyed out (it tells me "Network Manager is disabled" or something similar). After a minute (approx), it suddenly comes to life and connects me. Now, I think this only happens when I have:
A) set the wireless connection to "all users"
B) given an empty password for the keyring
But when I cancel either of the two above, it doesn't stop it from happening. I've tried updating etc.. to no avail. I've also tried wicd, but for some reason installing wicd from synaptic doesn't remove Network Manager? Anyway, has anyone seen behaviour like this? Any suggestions for first steps to take to see where it's blocking?
View 9 Replies
View Related
Oct 17, 2010
My laptop receives all the wireless networks but when I am trying to connect to some protected connection (with right password) it just doesn't connect. How to fix that?I using OpenSuse 11.3 gnome 32bit. Dell Wireless 1397 WLAN Min-Card.
View 1 Replies
View Related
Nov 19, 2010
I have this project for my operating systems class and I have put together the basic flow chart to aid me in writing the program. I know how to use pipes as a buffer to hold info. I know how to create a binary semaphore. But what I dont know is this:
How to "use a delay adjustment parameter K in the critical section to adjust the speed of the display process to show that without semaphore protection the displayed contents of the buffer are randomly interleaved."
First off, I am definitely not asking anyone to give me the solution. But I do need some guidance. So I figure there will be an if statement with two options:
1. If true, use semaphore protection to enter/exit critical section
2. If false, no semaphore protection -- this is where the contents of the buffer should be interleaved.
Now does that mean that as each child process enters the non-protected critical section, it should "sleep" for a randomized time? I mean, will this allow my output to be interleaved?
So lets say my command line looks like this:
what happens to the 100? Is it randomized using rand and srand and passed as a parameter to sleep() inside the critcal section?
View 5 Replies
View Related
Jun 11, 2009
Its seems Fedora 11 on eee pc 1000h cannot connect to any wireless type(Open, WPA2, WPA or WEP) of a hidden network(non broadcasting SSID). Though it can connect to visible ones(broadcasting SSID), since my college is on a hidden network this a problem for me. Though I can't really test if its just fedora 11 or rpmfusion drivers for it 1000h model related problem.
View 13 Replies
View Related
