Fedora Networking :: Network GUI: Enable Button Grayed Out
Dec 17, 2009
My MythTV box has two interfaces:
A 10/100 Ethernet interface built into the motherboard. (Recognized as eth0)
A USB wireless dongle. Linksys, I believe. (Recognized as wlan0)
Both of these were working fine under FC8.
I recently performed a full reinstall, using Fedora 12.
Both network devices are recognized. I can configure them, using the Network Devices GUI that comes with KDE.
In the case of the wireless device, I entered all of the required information. (Copied in from the FC8 settings.)
Here's the problem. Whether I'm the root user or not, the "Enable" button is grayed out.
Any ideas? I had *no problem* with this device under FC8. The hardware "I see you" messages in /var/log/messages don't suggest any problems. I'm not leaving out any setting information.
View 1 Replies
ADVERTISEMENT
Nov 30, 2010
i have installed fedora12 in my compaq laptop.i am under proxy..i just gave the local ip address to the laptop..and try to activate the etho device..but ..all the activate,deactivate,delete buttons are grayed out..they are completely looking dead..
View 2 Replies
View Related
May 24, 2010
I want to copy a file from folder A to folder B using the GUI
But the paste button is grayed out.
I realise this is because I've logged in as a user rather than root, so how do I enable the paste option on this occasion so that I can paste these files?
View 10 Replies
View Related
Mar 23, 2010
I have Ubuntu 10.04 and had no problems with wireless or wired. However, now it says Networking Disabled. When I click on it, everything is grayed out. My physical wireless button is on.
View 5 Replies
View Related
Mar 10, 2009
I'm running Fedora 10. My Network Manager settings are all grayed out. They are uneditable. I can see the detected settings, but not change them. All of the settings fields are disabled.
Is there a way to enable these, so that they can be edited?
Starting with the menu in the upper left corner of the GNOME screen: System/Preferences/Internet And Network/Network Connections
The Network Manager window appears correctly.
I see all automatically generated settings that were created for my various devices:
In particular, I want to be able to edit "Auto vmnet8", for VMware usage.
I know about the workaround of going back to the manual network configuration as used in older versions of Fedora, such as editing the files in /etc/sysconfig/network-scripts/ifcfg-* and then enabling the old "network" service and disabling the "NetworkManager" service.
However, this workaround really won't work in this situation. The VMware interfaces, vmnet1 and vmnet8, are virtual interfaces that *only* exist when the VMware services are running. The VMware services are started *after* the old manual network configuration would be applied. So, at the time the scripts in /etc/sysconfig/network-scripts are processed, the vmnet1 and vmnet8 devices do not yet exist! I'm hesitant to change the numbering of services, lest other things break (VMware on Fedora 10 is rather fragile already).
I love the feature of NetworkManager to be able to automatically apply settings to newly materialized network devices (such as vmnet1 and vmnet8 when VMware is loaded). However, I need to also be able to edit those settings.
Is there a solution that will make my Network Manager "Edit" window not be entirely grayed out? I can see the settings pages just fine, but unfortunately, they are all disabled and I can't edit them at all.
View 11 Replies
View Related
Jan 17, 2010
my wireless just stopped working. the network manager in my panel no longer allows me to enable wireless. the option to enable wireless is there, but it is grayed out and will not let me connect. i reinstalled my wifi driver but it didnt change anything. iwconfig shows that the card is working why is the network manager not?
View 7 Replies
View Related
Dec 1, 2010
I'm using Ubuntu desktop 10.10 on an Hp Pavilion dv2700 laptop. Most of the time I have had no issues, however on two separate occasions the wifi and bluetooth have been disabled, the switch on the front of the computer has no effect.the enable wireless function is grayed out, so I was not able to enable it. The first time it happened, (I didn't have an Ethernet cord at the time), I booted into windows Vista, thinking I could connect to the internet and find an answer. Low and behold I had the same problem in windows, however I was able to enable the wifi and blue tooth in windows. Now, rebooting into Ubuntu, the problem was resolved. The second time around the same thing happened, and I booted into Windows to fix the problem. I have done a search for known bugs on this issue, but none seem to relate to my exact problem. Is there a way to enable the wifi when it is grayed out? like in windows?Like I said this has only happened twice, but I had to boot into windows to fix the problem. I really want to delete windows all together, but if I have to keep it around awhile to fix this issue I guess I will.
View 5 Replies
View Related
Jan 20, 2010
So I have a intel wifi link 5100 , the drivers should work BUT iwconfig doesn't show my card ..
However doing a ' sudo lshw -C network ' command , it DOES show my wireless card is recognised but not enabled and here is where the problems start ..
I have a touch button on my laptop to enable/dissable it And when I touch it in Ubuntu it doesn't light up like in W7
How can I enable it :s? I really want to use ubuntu !
View 9 Replies
View Related
Nov 2, 2010
I recently installed 10.10 Maverick on a lenovo S12, and I've been having problems with the wireless connection. First I installed the Broadcom B43 driver. This driver seems to work well except upon resume, I'm no longer connected, and wireless is disabled, and the 'enable wireless' is grayed out and I can't seem to find a way to enable it besides a restart.
I tried what is suggested in this post: [url]
Namely:
Code:
Put:
Code:
This doesn't seem to have any effect
I also tried the Broadcom STA driver. This was only better in that after resuming it tried to reconnect, but never managed to.
View 3 Replies
View Related
Apr 22, 2010
[url] I have just had a similar problem.
No network, and dhclient command allowed the machine to lease an ip address from the dhcp server. Networking capability back.
EXCEPT that Network Manager is still greyed out as unmanaged, and right click still gives Network Management Disabled.
Wonder what's going on with Lynx and NM?
View 3 Replies
View Related
Mar 14, 2011
I just installed Ubuntu 10.04, everything is fine, but the wireless. When I try to connect to my WPA2 protected network, it is grayed out. SO I click Connect to Hidden Wireless Network, and this window pops up. I put in my network name, the security type, and password. It acts like it is connecting, the wireless icon is going up and down. But then another window pops up, saying Authentication required by wireless network and the down arrow is grayed out. Screenshot.jpg
View 2 Replies
View Related
May 28, 2010
EDIT: Whoops. Just realized that there is a Networking subforum. Apologies. In 10.04, I am able to get to the dialog in NM that asks for the network name and security for the creation of a new wireless network. However, the "Connect" button is grayed out and filling out all fields doesn't allow me to press it. I assume that this means that either there is a problem with my configuration or that my network card is not supported. Here is the lshw entry for my wireless card:
Code:
*-network
description: Wireless interface
product: PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
vendor: Intel Corporation
[Code]...
EDIT2: Well, I was able to make an ad hoc connection via "Edit Connections" This seems to be a bug in the NetworkManager dialog.
View 5 Replies
View Related
May 9, 2009
I am doing network config of my laptop. I'm new to Fedora, so I'm not sure how it goes ...
I have an Ethernet device (eth0) and a wireless device, wlan0
Status in system->administration->network:
Tab devices:
eth0 : active
wlan0: inactive
Tab Hardware:
eth0: system
wlan0: configured (description: b43)
Double clicking on the wlan0 line gets you to Network Adapters Configuration, where adapter b43 grayed out) is associated with device wlan0. So far, so good (I did all the fwcutter stuff, so I assume this is the result). When I installed the system (from installcd, then update, then install broadcom-wl, ...) I configured it to be started up with network manager, automatically on startup. I managed to get it working exactly once in that session.
Problem is, it doesn't start up and the wireless is not even visible when you click the network manager icon. For that matter, eth0 does not start automatically either, but at least there is a button to start it in network manager. Coming back to the tab devices, clicking on wlan0 allows you to click on the activate button ... but there it says: Cannot activate network device wlan0! b43 device wlan0 does not seem to be present.
View 6 Replies
View Related
Dec 28, 2010
I am new to linux world, recently installed ubuntu desktop 10.10 on old laptop (fujitsu-siemens amilo). When installed, I noticed that the
1. Enable wireless is grayed out
2. Wireless is disabled
Recently acquired a d-link dwl-g122 ver. C1 USB wireless, didn't want to fiddle with original. I am totally new to linux, this is my first installation.
Tried the gksudo gedit /etc/network/interfaces added these lines: auto wlan1
iface wlan1... IT CHANGES to device not managed, tried /etc/NetworkManager/nm-system-settings.conf:
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
Changing it to true the d link is again disabled?
3. When d link is plugged, ubuntu boots but stuck after login screen?
On Vista, home network I use wpa2 psk protection, essid not broadcasting, hidden.
View 8 Replies
View Related
Apr 17, 2010
I recently installed Fedora on an old computer of mine that I pulled out of storage, and I can not get it to detect my wireless network. Previously it was running Windows XP and I was able to get it to connect, but now that I'm on Fedora it doesn't even detect my network. I tried lspci and lsusb but I didn't find anything under network, only Ethernet showing my linksys. I know I must have a wireless chipset, but nothing will show.
I also attempted to yum install ndiswrapper because another thread with a similar problem suggested this, and when it prompted me for my password it wouldn't let me type. How would I go about fixing this?
View 14 Replies
View Related
Oct 2, 2010
I can't install Ubuntu 10.10 (64-bits) because the Forward button is grayed out in the "Who are you?" box.
I tried installing with various options (with and w/o additional software and with and w/o online updating, manual and automatic partitioning, going back and forth, trying different ways to fill out the fields in the stuck "Who are you?" page etc.)
The most cynical is that at the bottom it says: "Ready when you are..." - which obviously isn't true - it should say: "I am utterly stuck...".
Machine is a dual 275 Opteron with 16 GB registered RAM on an Iwill DK88 mobo. 3 SATA disks and 2 IDE disks. Latest BIOS.
View 9 Replies
View Related
May 6, 2010
I've just switched from xub to lub, and I must say it's a lot lot faster. There's just one really annoying problem (I have no idea if this is in any way related to LXDE or if it's just due to 10.04): Network Manager only starts about a minute after the rest of the desktop. So my system boots up, I log in, see the applet, but it is greyed out (it tells me "Network Manager is disabled" or something similar). After a minute (approx), it suddenly comes to life and connects me. Now, I think this only happens when I have:
A) set the wireless connection to "all users"
B) given an empty password for the keyring
But when I cancel either of the two above, it doesn't stop it from happening. I've tried updating etc.. to no avail. I've also tried wicd, but for some reason installing wicd from synaptic doesn't remove Network Manager? Anyway, has anyone seen behaviour like this? Any suggestions for first steps to take to see where it's blocking?
View 9 Replies
View Related
Apr 8, 2011
Still pretty new to this, from what i have read, the more info i give the better, I am running ubuntu 11.04 with KDE installed via the terminal. I was trying to get my TV to work as another display, I don't know what I have done, after my earlier problems I have learnt to back up and restore my xorg.conf file but with no luck, I now can't change any settings as the title says the apply button is grayed out and when i try and save it to the xorg.conf file and restart the xserver it says that "Your current changes to the X server display configuration may no longer be applied due to changes made to the running X server.
You may either reload the current X server settings and lose any configuration setup in this page, or select "Cancel" and save your changes to the X configuration file (requires restarting X to take effect.)
If you select "Cancel", you will only be allowed to apply settings once you have reset the configuration.Your current changes to the X server display configuration may no longer be applied due to changes made to the running X server. You may either reload the current X server settings and lose any configuration setup in this page, or select "Cancel" and save your changes to the X configuration file (requires restarting X to take effect.)
If you select "Cancel", you will only be allowed to apply settings once you have reset the configuration. Your current changes to the X server display configuration may no longer be applied due to changes made to the running X server. You may either reload the current X server settings and lose any configuration setup in this page, or select "Cancel" and save your changes to the X configuration file (requires restarting X to take effect.)
If you select "Cancel", you will only be allowed to apply settings once you have reset the configuration."
when I booted last i got terminal with this showing, for the first time,
Xlib: extension "RANDR" missing on display ":0".
(orca:1984): Wnck-WARNING **: Property _NET_WM_NAME contained invalid UTF-8
My xorg.conf is
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 270.29 (buildd@roseapple) Fri Feb 25 14:43:24 UTC 2011
Section "ServerLayout"
[Code]...
View 5 Replies
View Related
Mar 30, 2011
I am using OpenSuse 11.4(32 bit) on my Lenovo B460 laptop, and as the title points, am unable to use wireless on it. The 'enable wireless' option from icon menu is not greyed out, however clicking it does nothing, it remains disabled.
lspci -vv shows:
"04:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
Subsystem: Broadcom Corporation Device 0510
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
[code]....
so it seems that opensuse knows my hardware but networkmanager doesn't! I have all broadcom packages installed as well as kernel-firmware installed.
View 9 Replies
View Related
Oct 1, 2010
i finally got X and gnome installed and working on squeeze now.but the login screen and network settings were grayed out.Since i install those things from installation CD, I am thinking there are packages missing.
View 6 Replies
View Related
Apr 2, 2011
Whenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..
OS:Xubuntu 10.04 LTS!
hardware: dell inspiron 6000
nm applet: 0.8.?
View 6 Replies
View Related
Jul 13, 2010
I am trying to use my tmobile 8320 blackberry as a modem I hook it up through the USB and the phone is recognized I go into network manager to enter the settings for my Apn and Number to dial to and when I try to enter the Network to connect to the apply button goes away and it won't let me go past that point is this something screwed up in Ubuntu
View 1 Replies
View Related
May 11, 2011
I've had a host of problems since upgrading to 11.04 Natty Narwhal, so let's deal with these 1 at a time.
I've got a Hewlett-Packard Pavilion G60 laptop. Next to the power button is a handy wireless on/off button. This has always worked well with previous editions (9.04,through 10.10). first press toggles the wireless off, second press toggles it on.
Not so in 11.04. The toggle off works great, first time. But, it will not toggle back on. Not after any number of tries, not after restarting, not after booting into other OS's (9.10 and Vista) re-enabling it there and then booting back into Narwhal. to further complicate the issue, this feature bypass the network manager, so toggling the wireless off by the switch leaves me showing no wireless adapter in the network manager. I also restarted, switched from Unity to a Gnome session, but the issue still persists.
As my only network options are wireless, this has become a substantial inconvenience.
----
EDIT: so the network util is actually saying "wireless disabled by hardware switch". Also noticed it I enable it in 9.10, reboot to 11.04 (where I inevitably fail to re-enable it), then reboot into 9.10, it will initially be disabled. The key difference is in 9.10 I have the ability to enable wifi using the hardware button. It seems that 11.04 is remembering that wireless is disabled between boots. Is there a place it might be storing this value? If so, I may be able simply to set the value as enabled, since toggling that silly button isn't working.
-----
EDIT 2:
found this thread:"Wireless disabled by hardware switch" bug? - Natty
seems to be a similar issue. I'll be following how that one develops, too.
View 3 Replies
View Related
May 21, 2011
Is it possible to turn off the computer (Slackware 13.37 Box) simply using the power button on the keyboard
View 7 Replies
View Related
May 25, 2011
I have an Averatec 3200 laptop with a Intel PRO/Wireless 2200BG card. When I click on Network Connections, it says wireless is disabled. I checked my /var/lib/NetworkManager/NetworkManager.state file, and it said "wireless enabled=false" so I changed it to true.
It just goes back to false on reboot. I also ran rfkill unblock all, but rfkill list still shows that there is a hardware block on. The driver for this wireless card shows that it is installed. I'm not sure what to try next!I just bought this computer used, and freshly installed Ubuntu 10.10 on it, so can't say if it worked in any other distro.
View 3 Replies
View Related
Jan 8, 2010
I've got 5 users who share a bunch of virtual Windows XP guests via VRDP (VirtualBox RDP access), and I'm having some problems with managing their NumLock state. They all use rdesktop to access the Windows XP machines. This works very well, as long as all of them have NumLock enabled. If one of them disables it by mistake, and then logs into one of the Windows XP machines, NumLock is disabled and some of the programs they use start to act really weird. This is causing us some grief.
So I'd like to be able to enable NumLock on all the computers (they are all running Slackware 12.2) before X, while X runs and while KDE is running. And when NumLock is enabled for the entire system, thenI'd like to remove the ability to disable NumLock altogether. NumLock should always be enabled for these users, no matter what. It would be really nice if Linux/X/KDE/whatever just honored the BIOS setting, but I haven't been able to figure out how to do that. Oh, and I'd really like if the NumLock LED was ON, so everybody are made aware of the fact that they have NumLock turned on.
ps. I've tried remapping the keys on the numeric pad with xmodmap, but that doesn't solve the problem. The actual NumLock state must be set to avoid problems with the troubled Windows programs.
View 4 Replies
View Related
Aug 24, 2010
Trying to get the wired nic working so I can troubleshoot the wireless. I cannot get any kind of network activity. Been searching so I will post a little information that seems to be common with my situation.
lshw -C network
reveals:
WARNING: you should run this program as super-user.
*-network DISABLED
description: Ethernet interface
product: 82562EZ 10/100 Ethernet Controller
vendor: Intel Corporation
[code]....
View 9 Replies
View Related
Nov 16, 2010
I reported recently that I have a problem connecting to a Windows network, and someone suggested upgrading to Ubuntu 10.4 I have done, and still have the problem.
The error message I get is: "Unable to mount location. Failed to retrieve share list from server".
View 3 Replies
View Related
Feb 7, 2011
I'm running Ubuntu in VMWare for a side project. I noticed when I boot up, it doesn't let me access anything externally. I have to disable network manager and re-enable it. Once done, I can hit everything fine. I'm using a static IP in network manager.
View 1 Replies
View Related
Jun 12, 2009
Ubuntu desktop 9.04 Whenever I try to copy files to any machine on the network, the transfer stops and I no longer have access to the network or the internet. This happens whether I'm doing scp, copy with the gui, when copying to windows machines, and when uploading database files with phpmyadmin. I have been able to successfully transfer large amounts of data outside of the network via ftp, but not to any on the network. I've discovered that I can re-enable network access by restarting NetworkManager.
View 1 Replies
View Related
