Ubuntu Networking :: Bad Password - Error Message When Trying To Connect To WPA/WPA2 Wireless Network

Jul 5, 2011

I keep getting a "bad password" error message when trying to connect via wpa_supplicant to a wireless network (Apple Time Capsule WPA/WPA2 mixed).

Here's my wpa_supplicant.conf:

Code:

And the relevant line in the /etc/network/interfaces file:

Code:

The Time Capsule log contains the following error message--

Code:

So perhaps the password is somehow getting lost in translation from Ubuntu to the Time Capsule?

View 9 Replies


ADVERTISEMENT

Debian :: Connect To The Wireless Network(WPA/WPA2)?

Jul 27, 2010

how can i connect to the wireless network(WPA/WPA2)? i dont have network manager,so help me with terminal. i download wpasusclinet,but help me from first.

View 8 Replies View Related

Ubuntu Networking :: Connect To My Wireless Network Without The Use Of An Admin Password?

Oct 18, 2010

Is there a way i can setup my computer so i can connect to my wireless network without the use of an admin password? i personally feel that it wouldn't be a security risk of any sort to not require a password to connect to an ecrypted wireless connection.

View 9 Replies View Related

Ubuntu Networking :: Connect To The WPA2 LEAP Network

Apr 17, 2010

My college runs a WPA2 LEAP secured wireless network, and I am having problems connecting to it under Ubuntu. I can connect to it just fine under Windows, just not under Ubuntu. Under Ubuntu I can connect to other networks such as my home WEP secured wireless network, so it shouldn't be a hardware or driver issue.

When I do connect to the WPA2 LEAP network it recognizes the network and tries to connect, it pops up the login box for me to enter my username and password, but after I click connect it pops back up again about 10 seconds later. It pops up like this about 3 times total, then after the third time it stops trying to connect and the Wireless Network Disconnected message is shown.

View 1 Replies View Related

Ubuntu Networking :: Connect Via Terminal To A Wifi Network WPA2 - 10.04

Nov 16, 2010

Im trying to connect to my wireless network via terminal. My wifi network has a WPA2 encription. Im running ubuntu server 10.04. wifi interfaces are active, i can "see" my network with airodump. The only thing is i dont really know how to configure my iwconfig to connect to it.

View 2 Replies View Related

Ubuntu Networking :: Connect To WPA2 Protected Network - Grayed Out

Mar 14, 2011

I just installed Ubuntu 10.04, everything is fine, but the wireless. When I try to connect to my WPA2 protected network, it is grayed out. SO I click Connect to Hidden Wireless Network, and this window pops up. I put in my network name, the security type, and password. It acts like it is connecting, the wireless icon is going up and down. But then another window pops up, saying Authentication required by wireless network and the down arrow is grayed out. Screenshot.jpg

View 2 Replies View Related

OpenSUSE Wireless :: When Click The Button To Connect To A Wireless Network This Message Apears:Network Management Disabled?

Mar 23, 2010

When i click the button to connect to a wireless network this message apears:Network management disabled

View 1 Replies View Related

Fedora Networking :: Unable To Connect To WPA2 Network

May 9, 2009

O currently have 2 USB WiFi adaptors: a Linksys WUSB54G v4 and a D-Link DWA-110. Both these USB adaptors worked extremely well in Windows: they could connect to any network: unsecured, WEP and WPA1/2I have tested these adaptors in DreamLinux, OpenSUSE and Mandriva: in these 3 distributions, i could use both adaptors to connect to my home's WPA2 network.Both adaptors also work well in Fedora 10.In Fedora 11 Alpha though, its a different thing: only the D-Link is able to connect to the home WPA2 network. My Linksys WUSB54Gv4 can 'see' the network, but when i enter in the WPA2 key, it takes forever to try to negotiate a connection before timing out and disconnecting.

View 3 Replies View Related

Fedora Networking :: RT2860 Does Not Connect To WPA / WPA2 Network (F13)

May 30, 2010

I have a problem with my RT2860 in my Eee PC 901 running F13. It connected fine in F12 when I installed the akmod-rt2860 driver. I enter my WPA key, then it tries to connect, but the WPA key screen appears again saying that I may have typed in my WPA key incorrectly. However, I checked and it is the right WPA key.

View 5 Replies View Related

Ubuntu Networking :: Wpa2 Wireless Can't Detect Any Network

Mar 26, 2010

In my toshiba m900 with realtek wireless lan. i canot detect any network. should i see any network? i setup my access point using wpa2 in windows. how about the ubuntu 10.04? i mean do they support wpa2 and wireless issues?

View 9 Replies View Related

Ubuntu Networking :: Connecting To A Secure Wireless Network (WPA Or WPA2)

Sep 1, 2011

In setting up wireless connections I have ran into an array of problems. First, when I installed the new OS on my laptop I had to get the correct drivers and firmware for it to display and connect to any connections, had no problem here connecting to a secure wireless network (WPA or WPA2). I then installed Ubuntu on my desktop and had to find the correct driver for the Netgear WNDA3100v2 USB adapter, got it all installed with the Windows Wireless Drivers tool or w/e it is. This made all the available connections come up. I tried connecting with the WPA password I was given for the network and will not connect.

I had the guy managing the network change the one I connect to, to a WEP Passphrase Shared Key thinking this would solve my issue, still nothing. And also in doing so, now my laptop will not connect to the wireless network using the Passphrase. I do not want to go back to Windows, and I will be getting rid of my Lan connection soon so i need a solution to fix this wireless connection problem.

View 9 Replies View Related

Networking :: WPA2 Network - Ndiswrapper Wireless - Ubuntu 9.04 - Reset Router To Get Online

Apr 1, 2010

I've been having a network problem that I've been able to temporarily solve by rebooting the router, but even that can be shaky at times, and it can sometimes disturb others' internet activites, so I'd really like to tackle this while I can. I had an old thread about this, but it's ancient history by now, and plus which, I've got a bit more Linux experience and patience than I did before.

The basic problem is that NetworkManager will associate and connect to my home wireless network, but a) it won't let me ping the router or anywhere else ("Destination Host Unreachable"), and b) the connection lasts for maybe a couple minutes at most. If I reset the router, however, 9 times out of 10 it will associate and connect successfully and I can get online, but I have to run a constant ping to the router with a 10-second interval, otherwise it drops the connection, unless I'm doing a lot of other heavy network activity.

ping 192.168.1.1 (the router):

Code:

I've tried wpa_supplicant, but this is what I get (it's apparently unsuccessful...? ESSID/MAC addresses censored where necessary):

Code:

The last prompt line is included because I cancelled it myself; it didn't abort on its own. If left unmonitored, it basically keeps doing this over and over, with no visible network activity at all.

With NetworkManager, I can keep selecting the network's ESSID over and over, and it seems to reconnect, but I still can't ping out anywhere. I'm using a Netgear WN111v1 wireless adapter with ndiswrapper and the Windows drivers. I have no idea what the chipset is, and I doubt that Linux drivers exist for it, even if I knew what it was. The router is using WPA2 security (hence my trying wpa_supplicant)

lsusb:

Code:

ifconfig wlan0 (while connected; IP/MAC addresses censored where needed):

Code:

ifconfig wlan0 (while not connected; IP/MAC addresses censored where needed):

Code:

Code:

I only include this for format checking purposes. The commented out "psk" is the actual text passphrase, while the uncommented one is (presumably) a hex representation of the same key. Is this correct? I've never done this with wpa_supplicant before, I've only used NetworkManager (which is a pain in the @$$ because it requires X to run, and so it disconnects any time I log out/back in ).

Is there any hope of getting my wireless connection permanently working, so that I don't have to reset the router every time I need to reboot or log out/back in?

View 15 Replies View Related

Debian Configuration :: Can't Connect To WPA2 Network

Aug 31, 2011

I have a laptop (running Arch Linux) and a desktop. Until recently my desktop computer ran Arch but I'm taking Debian for a spin now. At my home there is a wireless network with WPA2 encoding. I use the wicd gui to connect to this. I assume, that since I can see the SSID in the wicd window, all drivers are correctly installed and functioning. On my Arch computer, wicd reports this SSID as having WPA2 encoding, but on the Debian computer, it shows up as WEP. Even when I choose the correct encryption thing, WPA2 (preshared key), and put the correct password in, I can't get a connection up.

View 6 Replies View Related

OpenSUSE Network :: KDE Keep Asking Secrets When Try To Connect To WPA2

Apr 8, 2011

I recently installed KDE and just found that it cannot connect to my school wireless which uses WPA2.
It keep asking Secretes for , even after I input everything correctly. It works fine with not secured wireless.In Gnome there was no problem with connecting to this wireless service.

View 9 Replies View Related

Fedora :: Pc 1000h Cannot Connect To Any Wireless Type ( Open, WPA2, WPA Or WEP )?

Jun 11, 2009

Its seems Fedora 11 on eee pc 1000h cannot connect to any wireless type(Open, WPA2, WPA or WEP) of a hidden network(non broadcasting SSID). Though it can connect to visible ones(broadcasting SSID), since my college is on a hidden network this a problem for me. Though I can't really test if its just fedora 11 or rpmfusion drivers for it 1000h model related problem.

View 13 Replies View Related

Ubuntu Networking :: Network Manager - Wireless Connection - Dell Laptop Error Wicd States "Wrong Password" Which Is Not True

Jun 11, 2010

These problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.

Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?

[Code]...

I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.

View 1 Replies View Related

Ubuntu Installation :: Wireless Network Noticed Connection And Accepted Password But Didn't Connect

Mar 16, 2011

When I firsts installed Ubuntu 10.04, and tried to hook it up to my wireless network it noticed my connection and accepted my password, but did not connect. My wireless card doesn't have linux drivers installed. I found the correct drivers, but I am unsure of the correct way to install them in Windows so they work in Ubuntu. I am currently dual booting Windows 7 and Ubuntu.

View 9 Replies View Related

Ubuntu Networking :: 10.04 Wpa2 Won't Connect

Dec 20, 2010

I have had my network setup and working with WEP for a long time. Also Windows 7 is working fine from the same laptop. I can't figure out why the essid is scrambled. Here is the output of iwconfig:

[Code]....

View 6 Replies View Related

Slackware :: Setup Wireless Network With WPA2 Encryption?

Jul 7, 2010

I followed [URL]..to set up my wireless network with WPA2 encryption. It works now and knemo says:Encryption: active. However, "iwconfig wlan0" says Encrytion key: off:

Code:
wlan0 IEEE 802.11abgn ESSID:"blitz"
Mode:Managed Frequency:2.472 GHz Access Point: 00:25:9C:DE:D3:7D
Bit Rate=0 kb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off

[Code]...

So is there anything wrong with that "Encryption key: off" statement? I suspect that encryption key only applies to WEP, but not to WPA2 encryption, but I am not sure. So my question is, can I ignore that statement and assume that my encryption is fine?

Besides, where does knemo read the information about encryption from? As I mentioned, knemo detects that the encryption is active. Are there any other commands to make sure that my encryption is safe and well?

View 7 Replies View Related

Ubuntu Networking :: 10.4 - Password Entered But Cannot Connect To Wireless

Oct 31, 2010

I'm running Ubuntu 10.4 Netbook Remix on a Dell Mini Netbook 9 (I think that's what it is.) I used to be able to connect to my wireless internet fine, but then my brother put a password on it. So there's a little box that comes up and tells me to enter a password now. I do, and it tries to load for a minute and then wants me to enter my password again. It just keeps going like this.

View 9 Replies View Related

Ubuntu Networking :: Wicd WiFi Connection Fails / Bad Password Wpa2

Nov 27, 2010

I am running Ubuntu 10.04 on a PackardBell notebook and have just got an Orange Livebox 2 for broadband connection(after years of dial-up as no adsl in my area).I am trying to connect via WiFi to the Livebox to configure, but neither NetworkManager nor Wicd will connect. NM sees the Livebox but simply fails to connect after trying; Wicd says "Bad password".The WPA2 password I have entered is definitely correct, and I have connected without any problem from an AcerOne under Linpus.I have also tried to connect using Wicd and an ethernet cable, and this doesn't connect either, returning "Connection Failed: Unable to Get IP Address"

View 1 Replies View Related

Ubuntu Networking :: Wireless Card - Wont Connect It Just Keeps Asking Me For Password

Feb 18, 2011

I am running 10.10 and i have an asus N13 and it works BUT it will only connect to G networks i believe i have an Asus rtn16 N router with WPA2 Aes encryption and it wont connect it just keeps asking me for password.

View 2 Replies View Related

Ubuntu Networking :: When Type In WPA2 Password It Will Not Authenticate With Linksys WRT-54GL Router?

May 12, 2010

Well this one is driving me nuts. I've been searching through the forums for a while and it seems that a number of folks have similar issues but the solutions used don't look like they apply to me. so without further ado here are the outputs typically requested:lspci

Code:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)

[code]....

View 9 Replies View Related

Ubuntu Networking :: Wireless Card - No Longer To Connect To A Wireless Network

Jun 17, 2011

The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter

View 9 Replies View Related

Ubuntu Networking :: Belkin N300 Keeps Asking For Wireless Password And Doesn't Connect?

Mar 9, 2011

I've just literally gone out this morning and bought the Belkin N300 Dual Band USB for my Deskstation running Maverick Meerkat. At first i put the stick in and nothing happened. So i went to System>admin>Windows wireless drivers and clicked on there. I put the CD in the drive that came with the dongle and found the drivers folder on the disk. I then installed the .inf file in the XP folder. It connected straight away as easy as that.

I'm really frustrated though as it loses conectivity and then asks me for my WAP password on connection, but then doesn't seem to connect. I unplug the dongle and then hit connect again and it connects.

If i use the same dongle on XP i have no problems what so ever, so i know its not a signal strength issue.

View 8 Replies View Related

Ubuntu Networking :: No Wireless With 10.04 Wpa2

May 6, 2010

After updating to 10.04, I was able to connect easily to my network. However after getting a new router "Linksys WRT610Nv2", I was initially able to set up my wireless "WPA & WPA2 Personal"-encrypted network, but for whatever reason it stopped working completely.

My Asus EeePC 1000H does recognize my network, but its does not want to connect anymore, whatever I try. If I use no encryption, or go wired, everything works well. If I go on other networks everything is ok. I even reinstalled Passwords and Encryption Keys. Other computers (Windows-bad XP and Vista, laptop and desktop [sorry, but working on it to get rid of them!]) have no problems, either wired or wireless connecting with my network. Booting under 9.10, everything works ok as well. In Ubuntu 10.04, going into Network Connections and Edit my network, this is what I see:

[Code]....

View 9 Replies View Related

Ubuntu Networking :: Cannot Connect To WPA2 Secured Networks After 10.10 Upgrade?

Oct 13, 2010

Unsecured and WEP networks are fine. I do not have a WPA network to test on, but my school's WPA2 Eduroam network does not work. It tries to connect before asking again for my credentials, and this repeats. I'm on 64-bit 10.10 Ubuntu upgraded from a live CD install of 10.04. Laptop model is Acer Aspire 5741-5193. Output of lspci:

Code:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)

[Code]...

View 9 Replies View Related

General :: WPA2 - NetID And Pass - Wireless Network From Wicd And/or Command Line

Sep 23, 2010

The university I go to uses a WPA2 wireless network that requires a netID and password to connect too. I installed wicd but I can't seem to connect to this network, is there a way to add this functionality to wicd, and if so, how do I do that (links to a how-to or guide would be nice, I've yet to find one).

Also, I spend most of my time on campus in the command line, so I'd like to know if there is a way to use command line utilities to connect to this network (again, a guide or how-to would be nice)

I can get online through my fedora live USB just fine (w/ network manager) but I'd rather get on directly from slackware.

View 3 Replies View Related

Ubuntu Networking :: Ralink RT2860 Card Will Not Connect To WPA2 In Lucid

May 8, 2010

After installing Lucid, I noticed that my Ralink RT2860 card would not connect to my home network using WPA2 despite the network being visible and of good strength. So I followed the guide at [url] in order to install the newest Ralink drivers.

After installation, same issue. That is, the card will connect to my a/b/g/n network if I leave it unprotected, but it will not connect to the same network if switch it to WPA2. After being given the passphrase, the wireless icon on the indicator applet shows that it is trying to connect, but after awhile it fails. Does anyone know why the built-in driver and also the official Ralink driver are no good for WPA2 in Ubuntu 10.4 for my RT2860 card?

View 9 Replies View Related

Ubuntu Networking :: Can't Connect To WPA2-Personal After Update To Lucid Lynx

Jun 24, 2010

I updated to the latest version of Ubuntu and before I could connect to the network "krafft" that is a WPA2-Personal protected network.If I go into Windows and change security to none I can connect with Ubuntu, but not when it's protected.After a bit of time logged in without network a dialogue pops up and looks almost like this :but "Focus" is replaced with "krafft" and the password is something else.I know that the password is right and the network worked perfectly before update.I got an USB wireless network receiver from D-Link and the chipste is ralink rt2870.In the previous Ubuntu distribution you had to write "blacklist rt2800usb" in /etc/modprobe.d/blacklist.conf but it won't work with or without that blacklist.When I updated I saw some message about the network manager(at least I think so) so maybe the problem is in that.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved