Debian :: Connect To The Wireless Network(WPA/WPA2)?
Jul 27, 2010how can i connect to the wireless network(WPA/WPA2)? i dont have network manager,so help me with terminal. i download wpasusclinet,but help me from first.
View 8 Replies
ADVERTISEMENT
Ubuntu Networking :: Bad Password - Error Message When Trying To Connect To WPA/WPA2 Wireless Network
Jul 5, 2011I keep getting a "bad password" error message when trying to connect via wpa_supplicant to a wireless network (Apple Time Capsule WPA/WPA2 mixed).
Here's my wpa_supplicant.conf:
Code:
And the relevant line in the /etc/network/interfaces file:
Code:
The Time Capsule log contains the following error message--
Code:
So perhaps the password is somehow getting lost in translation from Ubuntu to the Time Capsule?
Debian Configuration :: Can't Connect To WPA2 Network
Aug 31, 2011I have a laptop (running Arch Linux) and a desktop. Until recently my desktop computer ran Arch but I'm taking Debian for a spin now. At my home there is a wireless network with WPA2 encoding. I use the wicd gui to connect to this. I assume, that since I can see the SSID in the wicd window, all drivers are correctly installed and functioning. On my Arch computer, wicd reports this SSID as having WPA2 encoding, but on the Debian computer, it shows up as WEP. Even when I choose the correct encryption thing, WPA2 (preshared key), and put the correct password in, I can't get a connection up.
View 6 Replies View RelatedOpenSUSE Network :: KDE Keep Asking Secrets When Try To Connect To WPA2
Apr 8, 2011I recently installed KDE and just found that it cannot connect to my school wireless which uses WPA2.
It keep asking Secretes for , even after I input everything correctly. It works fine with not secured wireless.In Gnome there was no problem with connecting to this wireless service.
Fedora Networking :: Unable To Connect To WPA2 Network
May 9, 2009O currently have 2 USB WiFi adaptors: a Linksys WUSB54G v4 and a D-Link DWA-110. Both these USB adaptors worked extremely well in Windows: they could connect to any network: unsecured, WEP and WPA1/2I have tested these adaptors in DreamLinux, OpenSUSE and Mandriva: in these 3 distributions, i could use both adaptors to connect to my home's WPA2 network.Both adaptors also work well in Fedora 10.In Fedora 11 Alpha though, its a different thing: only the D-Link is able to connect to the home WPA2 network. My Linksys WUSB54Gv4 can 'see' the network, but when i enter in the WPA2 key, it takes forever to try to negotiate a connection before timing out and disconnecting.
View 3 Replies View RelatedFedora Networking :: RT2860 Does Not Connect To WPA / WPA2 Network (F13)
May 30, 2010I have a problem with my RT2860 in my Eee PC 901 running F13. It connected fine in F12 when I installed the akmod-rt2860 driver. I enter my WPA key, then it tries to connect, but the WPA key screen appears again saying that I may have typed in my WPA key incorrectly. However, I checked and it is the right WPA key.
View 5 Replies View RelatedUbuntu Networking :: Connect To The WPA2 LEAP Network
Apr 17, 2010My college runs a WPA2 LEAP secured wireless network, and I am having problems connecting to it under Ubuntu. I can connect to it just fine under Windows, just not under Ubuntu. Under Ubuntu I can connect to other networks such as my home WEP secured wireless network, so it shouldn't be a hardware or driver issue.
When I do connect to the WPA2 LEAP network it recognizes the network and tries to connect, it pops up the login box for me to enter my username and password, but after I click connect it pops back up again about 10 seconds later. It pops up like this about 3 times total, then after the third time it stops trying to connect and the Wireless Network Disconnected message is shown.
Fedora :: Pc 1000h Cannot Connect To Any Wireless Type ( Open, WPA2, WPA Or WEP )?
Jun 11, 2009Its seems Fedora 11 on eee pc 1000h cannot connect to any wireless type(Open, WPA2, WPA or WEP) of a hidden network(non broadcasting SSID). Though it can connect to visible ones(broadcasting SSID), since my college is on a hidden network this a problem for me. Though I can't really test if its just fedora 11 or rpmfusion drivers for it 1000h model related problem.
View 13 Replies View RelatedUbuntu Networking :: Connect Via Terminal To A Wifi Network WPA2 - 10.04
Nov 16, 2010Im trying to connect to my wireless network via terminal. My wifi network has a WPA2 encription. Im running ubuntu server 10.04. wifi interfaces are active, i can "see" my network with airodump. The only thing is i dont really know how to configure my iwconfig to connect to it.
View 2 Replies View RelatedUbuntu Networking :: Connect To WPA2 Protected Network - Grayed Out
Mar 14, 2011I just installed Ubuntu 10.04, everything is fine, but the wireless. When I try to connect to my WPA2 protected network, it is grayed out. SO I click Connect to Hidden Wireless Network, and this window pops up. I put in my network name, the security type, and password. It acts like it is connecting, the wireless icon is going up and down. But then another window pops up, saying Authentication required by wireless network and the down arrow is grayed out. Screenshot.jpg
View 2 Replies View RelatedUbuntu Networking :: Wpa2 Wireless Can't Detect Any Network
Mar 26, 2010In my toshiba m900 with realtek wireless lan. i canot detect any network. should i see any network? i setup my access point using wpa2 in windows. how about the ubuntu 10.04? i mean do they support wpa2 and wireless issues?
View 9 Replies View RelatedSlackware :: Setup Wireless Network With WPA2 Encryption?
Jul 7, 2010I followed [URL]..to set up my wireless network with WPA2 encryption. It works now and knemo says:Encryption: active. However, "iwconfig wlan0" says Encrytion key: off:
Code:
wlan0 IEEE 802.11abgn ESSID:"blitz"
Mode:Managed Frequency:2.472 GHz Access Point: 00:25:9C:DE:D3:7D
Bit Rate=0 kb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
[Code]...
So is there anything wrong with that "Encryption key: off" statement? I suspect that encryption key only applies to WEP, but not to WPA2 encryption, but I am not sure. So my question is, can I ignore that statement and assume that my encryption is fine?
Besides, where does knemo read the information about encryption from? As I mentioned, knemo detects that the encryption is active. Are there any other commands to make sure that my encryption is safe and well?
Ubuntu Networking :: Connecting To A Secure Wireless Network (WPA Or WPA2)
Sep 1, 2011In setting up wireless connections I have ran into an array of problems. First, when I installed the new OS on my laptop I had to get the correct drivers and firmware for it to display and connect to any connections, had no problem here connecting to a secure wireless network (WPA or WPA2). I then installed Ubuntu on my desktop and had to find the correct driver for the Netgear WNDA3100v2 USB adapter, got it all installed with the Windows Wireless Drivers tool or w/e it is. This made all the available connections come up. I tried connecting with the WPA password I was given for the network and will not connect.
I had the guy managing the network change the one I connect to, to a WEP Passphrase Shared Key thinking this would solve my issue, still nothing. And also in doing so, now my laptop will not connect to the wireless network using the Passphrase. I do not want to go back to Windows, and I will be getting rid of my Lan connection soon so i need a solution to fix this wireless connection problem.
Networking :: WPA2 Network - Ndiswrapper Wireless - Ubuntu 9.04 - Reset Router To Get Online
Apr 1, 2010I've been having a network problem that I've been able to temporarily solve by rebooting the router, but even that can be shaky at times, and it can sometimes disturb others' internet activites, so I'd really like to tackle this while I can. I had an old thread about this, but it's ancient history by now, and plus which, I've got a bit more Linux experience and patience than I did before.
The basic problem is that NetworkManager will associate and connect to my home wireless network, but a) it won't let me ping the router or anywhere else ("Destination Host Unreachable"), and b) the connection lasts for maybe a couple minutes at most. If I reset the router, however, 9 times out of 10 it will associate and connect successfully and I can get online, but I have to run a constant ping to the router with a 10-second interval, otherwise it drops the connection, unless I'm doing a lot of other heavy network activity.
ping 192.168.1.1 (the router):
Code:
I've tried wpa_supplicant, but this is what I get (it's apparently unsuccessful...? ESSID/MAC addresses censored where necessary):
Code:
The last prompt line is included because I cancelled it myself; it didn't abort on its own. If left unmonitored, it basically keeps doing this over and over, with no visible network activity at all.
With NetworkManager, I can keep selecting the network's ESSID over and over, and it seems to reconnect, but I still can't ping out anywhere. I'm using a Netgear WN111v1 wireless adapter with ndiswrapper and the Windows drivers. I have no idea what the chipset is, and I doubt that Linux drivers exist for it, even if I knew what it was. The router is using WPA2 security (hence my trying wpa_supplicant)
lsusb:
Code:
ifconfig wlan0 (while connected; IP/MAC addresses censored where needed):
Code:
ifconfig wlan0 (while not connected; IP/MAC addresses censored where needed):
Code:
Code:
I only include this for format checking purposes. The commented out "psk" is the actual text passphrase, while the uncommented one is (presumably) a hex representation of the same key. Is this correct? I've never done this with wpa_supplicant before, I've only used NetworkManager (which is a pain in the @$$ because it requires X to run, and so it disconnects any time I log out/back in ).
Is there any hope of getting my wireless connection permanently working, so that I don't have to reset the router every time I need to reboot or log out/back in?
General :: WPA2 - NetID And Pass - Wireless Network From Wicd And/or Command Line
Sep 23, 2010The university I go to uses a WPA2 wireless network that requires a netID and password to connect too. I installed wicd but I can't seem to connect to this network, is there a way to add this functionality to wicd, and if so, how do I do that (links to a how-to or guide would be nice, I've yet to find one).
Also, I spend most of my time on campus in the command line, so I'd like to know if there is a way to use command line utilities to connect to this network (again, a guide or how-to would be nice)
I can get online through my fedora live USB just fine (w/ network manager) but I'd rather get on directly from slackware.
Debian :: Use Network-manager-gnome To Connect To Wireless Networks?
Feb 26, 2010I use network-manager-gnome to connect to my wireless networks, but I can only use it with a graphical environment, and it doesn't even work that well since it will drop the connection after a few minutes and I have to reconnect it manually, that means I cannot leave my computer downloading a big file all night since it will only download for a few minutes, does anyone know what package can I use to connect to my wireless without the need of network-manager, even if it's through command line?
View 9 Replies View RelatedDebian Configuration :: No Longer Connect To The Wireless Network After Squeeze Upgrade
Apr 17, 2011I upgraded from lenny to squeeze on a notebook and I can no longer connect to the wireless network. The computer is an LG notebook and the network card is ralink rt2860. I am using Gnome and NetworkManager. The wireless key is WEP hex. It was working fine with lenny till before the upgrade. After the upgrade, the network card stopped working. So, I checked
$ lspci|grep Network
08:00.0 Network controller: RaLink RT2860
Then I reinstalled the driver with apt-get install firmware-ralink wireless-tools Then the network manager tray started working again and saw the network, but cannot connect. It was trying to connect but timed out and kept asking for the password. It is the correct password. I tried deleting the old connection and recreated a new one in the nm. But still does not work.
[Code]...
OpenSUSE Wireless :: When Click The Button To Connect To A Wireless Network This Message Apears:Network Management Disabled?
Mar 23, 2010When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedDebian Hardware :: Iwl3945 Driver - Connect To Protected Wireless Network Using Iwconfig
Apr 9, 2010I'm having problems while trying to connect to protected wireless network using iwconfig(8).
When I type in:
Things work ONLY if i DON'T input some numbers after the s: but my actual passkey has numbers.
It outputs this as an error:
my configuration(ThinkPad R61i):
Ubuntu Networking :: 10.04 Wpa2 Won't Connect
Dec 20, 2010I have had my network setup and working with WEP for a long time. Also Windows 7 is working fine from the same laptop. I can't figure out why the essid is scrambled. Here is the output of iwconfig:
[Code]....
OpenSUSE Wireless :: Knetworkmanager Detect Wireless Network But Doesn't Automatically Connect
Apr 17, 2010at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
OpenSUSE Wireless :: Connect Ipod Touch To A Wireless Ad-hoc Network Of Laptop?
Apr 13, 2010On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
View 5 Replies View RelatedOpenSUSE Wireless :: LiveUSB Cannot Connect To Non-broadcast SSID Wireless Network
Sep 30, 2010I've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
Ubuntu Networking :: Wireless Card - No Longer To Connect To A Wireless Network
Jun 17, 2011The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedOpenSUSE Wireless :: Intel 3945abg Wireless Network Card Cannot Connect To Router Automatically
Apr 8, 2010I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies View RelatedFedora Networking :: Wireless With Inspiron 1501 Bcm4311 Rev01 / Trying To Connect To A Hidden Wireless Network?
May 5, 2009I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
OpenSUSE Wireless :: After Hibernate Or Sleep Can't Connect To Any Wireless Network?
Nov 5, 2010I'm moving from other distros. and I'm currently loving openSUSE and I'm probably going to stick with it for a long time.I have already googled for this, but I found no solution, but I figured this should be a common problem... Does google searches inside this forum?Now... for my problem, whenever I hibernate (suspend to disk) or sleep (suspend to ram) I can't resume my wireless connection nor connect to another.I don't know if this is an issue if I use cables, because I simply don't with my netbook:The hardware in question is an ASUS 1005HA eee pc, running openSUSE version is 11.3 fully updated. Didn't mess with wireless connections, nor kernel or hibernate settings
View 9 Replies View RelatedOpenSUSE :: The KDE Network Monitor Requires 3 Reboots Before Being Able To Connect To Wireless Network
Mar 10, 2011After installing 11.4, I need to type in the command to update the firmware for a broadcom wifi adapter. Then I needed to reboot, twice, before the system knew to use the adapter (where the adapter wifi light goes from orange to blue).
Then I needed to add my wireless network and type in my key. But the key does not take. If I click on my wireless network icon, it just re-asks for the key and does not connect nor give any other message. Network icon continues to display no connection.
So I need to reboot again.
When the system starts again, the adapter is blue, I click on the icon for my wifi network and it connects without asking for my key and I can then set to start my wifi by default.
Now my wifi works fine.
OpenSUSE Network :: Network Manager Won't Connect To Wireless Router
Apr 15, 2010All settings are correct as far as i can tell. The wep key works on all my windows boxes. When i have connect automatically enabled it never tries to connect. if I go to edit it it pops kde wallet up i put in credentials. wallet goes away then nothing happens. if i double click connection to my router also nothing happens. I have the wep key in there and i even made it visible to make sure.
View 5 Replies View RelatedOpenSUSE Network :: Unable To Connect To Wireless Network / Enable It?
Aug 9, 2010I am using OpenSuse 11.3 and Network Manager is giving me a headache by not connecting to WEP based wi-fi network.It works in a wi-fi at my office while at my home, it shows / detects the network but keeps asking me over and over.
View 3 Replies View Related