Ubuntu Networking :: Can't Connect To Virgin Broadband
Jun 23, 2010
After googling "Virgin wireless broadband"+Ubuntu I got two posts on seperate websites that advised changing APN to VirginBroadband from Virgininternet whcih I did and also followed the advice of one of the aforementioned posts to disable all Authentication Methods except PAP, I still haven't been able to connect although the machine is obviously trying to. So should I try enableing other Authentication Methods, or could it be a hardware or some other problem?
View 9 Replies
ADVERTISEMENT
Apr 27, 2010
I have just recently installed Open SUSE 11.2 from a CD I got from a Linux Magazine.Installed this fine as a dual-boot machine on my HP laptop.To access the Internet, I have normally used 2 ways:1. WIFI Connection via my home desktopUsing Netgear WG111v3 USB Adapter.2. Virgin Broadband USB Mobile Broadband stickI have no problem connecting this via my Windows Vista operating system.Somehow, under Open SUSE 11.2, this is a problem. 2. Virgin Broadband - I managed to get the Virgin Broadband icon of a mobile phone saying that it's connected and "Active" by keying in the number "*99#", username/password as blank and APN as VirginBroadband". However, when I launch Firefox browser, I couldn't get to any external Website even though the icon for the Virgin Broadband says that it's Active and connected.
So what's the problem ?1. WIFI Connectivity to Home Desktop WIFI - with this I have never never got any connection at all. It kept saying "Activating" and I have set up the connection and entered the WEP 128-bit paraphrase hex digits. I managed to scan and got the correct SSID and as I know they belong to my desktopI read somewhere that Netgear WG111v3 is not compatible with Open Suse 11.2 and will need to install the driver for this. So I did obtain the .INF file and installed ndiswrapper -i with the .inf file.. However, still not successful.I'm thinking of buying a Belkin USB Adapter which is in the list of compatible USB WIFI Adapter for Open Suse 11.2 - .. the 802.11g chipset.. as I couldn't get this to work
View 9 Replies
View Related
Jan 23, 2010
I am attempting to connect to Virgin Broadband (Australia) pre-paid using a Huawei E160e modem in Ubuntu 9.10 UNR. I have setup the connection as per [URL].. including disabling CHAP and changing the APN as required in the thread. when I try to connect using the network manager, it disconnects straight away with the message "GSM Network disconnected". When examining the logs /var/log/daemon.log, I get the following information:
Code:
Jan 23 21:26:09 janet-laptop NetworkManager: <info> Activation (ttyUSB0) starting connection 'Virgin Mobile'
Jan 23 21:26:09 janet-laptop NetworkManager: <info> (ttyUSB0): device state change: 3 -> 4 (reason 0)
Jan 23 21:26:09 janet-laptop NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
Jan 23 21:26:09 janet-laptop NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
[Code]....
View 6 Replies
View Related
Apr 11, 2010
I can't get my sister new computer (she needs for work) to work with her mobile broadband dongle (details at bottom of post). The light on the dongle flashes green when plugged in, it recognises the connection in mobile broadband network connections, but won't connect (i checked connect automatically, it doesn't come up as an option in the top panel network thingy either.
Googled a solution that works for other people, not for me. The solution is for ubuntu 8.[URL].. I've been using Ubuntu for a year or so but not that experienced in fixing problems. The wifi and screen brightness settings are't working either but that isn't really a problem, assume it will get fixed in an update soon.
Samsung N210 Ubuntu 10.04 Beta 2 (updated from 9.10, dongle didn't work in 9.10 either) Virgin Media Mobile Broadband Dongle. TCT Mobile Ltd, One Touch X200S
View 9 Replies
View Related
Jan 15, 2010
Just loaded Ubuntu 9.10 on a Dell 5100, (XP finally got the bsod) I have verizon mobile broadband, all was very good until I realized I cannot connect wirelessly. The usb modem was not recognized, there is no indication of any wireless connection. There is no icon and nothing happens when the usb modem is plugged in. I have been working on this for hrs & hrs. I am a complete novice on Linux, but CompT1 A certified on PC's
View 9 Replies
View Related
Mar 29, 2010
I have bsnl broadband connection in dual mode in windows no problem but in ubuntu I cant create a broadband connection. I want to connect in dial up mode.
View 3 Replies
View Related
May 26, 2010
How to connect Ubuntu to the Internet through a broadband connection? I decided to give Linux a try, and I picked the Ubuntu variant. I have some problems with the Internet connection though. I have a broadband (modem-less) PPoE connection, and all the info needed in order for me to connect are the username and password (which I have).
View 2 Replies
View Related
May 18, 2011
I have a multiboot system running several versions of linux which do not all use the same software for handling wifi connections or have the same kernel. They have all stopped being able to connect to the internet in the last few days. My Windows 7 set up still connects though it seems to be a slow to establish a connection.Could BT have changed something and if so what?
View 4 Replies
View Related
Jun 5, 2011
I just installed Ubuntu in my PC and I tried to connect to internet using broadband connection. I use a ADSL router with WiFi access point to connect with network and dial my username and password using my computer to connect to internet.I could so it easily on windows 7 from Network and Sharing center and Setting up new connection or network and connect to internet using broadband internet.How can i do it with ubuntu 11.04 ?
View 9 Replies
View Related
Mar 6, 2010
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
View 3 Replies
View Related
May 1, 2009
Im able to use nm-applet just fine to setup broadband card. Its a Sprint Sierra 598u. Im running Fedora 10 KDE version. Anyone know how to get it working? i tried the setup process but all it tells me is set up GPS or CDMA so i go CDMA for mine, but then it has some default name, and no providers, as the UBUNTU version did at least...i setup best i can but then after closing configs, i go to nm-applet icon in bottom-right and it doesn't show the mobile broadband connection, also any wireless connections don't work for some reason, but DO show up. just wont connect (which i got every so often when using ubuntu on the machine, was usually a switch off or restart away from fine
View 8 Replies
View Related
Jun 29, 2010
iam install ubuntu 9.10 i want to connect my bsnl broadband internet
View 3 Replies
View Related
May 24, 2011
I am having broadband connection, I need to connect broadband internet through eth0. Please give me some use full information for configuring this.
View 6 Replies
View Related
Mar 9, 2010
I am using WINDOWS 7, in which i connect to the internet through broadband connection dialer wich requires username and password,aslo i have another connection wich is used to connect to LAN. I hav recently installed ubuntu 9.10.. Now my WIRED connection is showing established..with eth1 and following are the outputs of some coomands which might help u to identify the problem..
[Code]...
View 8 Replies
View Related
Mar 10, 2010
Since my recent re-conversion into Ubuntu, I noticed Network-Manager now has mobile broadband support out of the box. Splendid!
I've been using my Huawei (Vodafone) modem since around two weeks, and so far it's been great, except for a little detail: sometimes, them modem simply won't work. I plug it in, "cd" drive (where the Vodafone Mobile Connect files are) shows up, but no "Vodafone" on Network-Manager.
I believe this has something to do with settings the modem may leave behind after each use, but I'm quite newb, so.
View 6 Replies
View Related
Jul 13, 2010
I am trying to use my tmobile 8320 blackberry as a modem I hook it up through the USB and the phone is recognized I go into network manager to enter the settings for my Apn and Number to dial to and when I try to enter the Network to connect to the apply button goes away and it won't let me go past that point is this something screwed up in Ubuntu
View 1 Replies
View Related
Jul 27, 2010
I have a Sony TZ270N running Ubuntu 10.04 splendidly. The Sprint Mobile Broadband works great, but it's a bit cumbersome to activate. Specifically, to get it to work I need to:
echo 0 > /sys/devices/platform/sony-laptop/wwanpower
sleep 5
echo 1 > /sys/devices/platform/sony-laptop/wwanpower
Then I wait another five seconds, right-click on the networking icon, choose "Enable mobile broadband", then left-click on the networking icon, and choose "Connect to Sprint Connection". I do this multiple times a day, and it's just a bit of a pain, especially when in a hurry. Accordingly, I'd like to script it so I can do the whole thing with a single command.
I've already put the above echo statements into a script and it works great; is there any way to script the actual start of the PPP session itself -- with the caveat that I'd like the networking icon to accurately reflect the latest state?
(In other words, I don't want to bypass the networking icon and just launch the PPP session in the background -- I want it to show that I'm connected, and still let me manage the connection via the icon after connected.)
View 3 Replies
View Related
Jun 15, 2010
I was wondering if there was Linux compatible software for Virgin Mobile's USB modem. Officially it's only compatible with Xp, Vista, and Mac OS X.
View 9 Replies
View Related
Mar 11, 2010
i cant access the internet as in windows first of all i live in Iraq and we used broadband connection and we do that by going to IE (internet explorer) and then properties then from the connections tab we choose setup then a wizard appear then we press next. connect to internet..setup my connection manually.....connect using a broadband connection that requires a username and password. ubuntu recognized the network but i cant do the steps above in firefox or in network options in ubuntu by the way when we go to connection properties in windows we choose to automaticly recognize ip (both if we use the lan or network card)
View 8 Replies
View Related
Feb 10, 2011
Pl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies
View Related
Jan 15, 2010
i have satanic ubuntu 8. i was trying to connect to my reliance netconnect broadband+ via the following method. the process failed. its a usb broadband dongle thing.
Code:
theunknowndoor@theunknowndoor:~$ SU
bash: SU: command not found
theunknowndoor@theunknowndoor:~$ su
Password:
su: Authentication failure
[Code]...
View 1 Replies
View Related
Feb 7, 2010
i am gonna install fedora and ubuntu.how to connect broadband in fedora and ubuntu..
View 1 Replies
View Related
Jul 18, 2010
How to connect wired broadband internet with ip in Linux 'ubuntu'
View 2 Replies
View Related
Aug 25, 2011
I am trying to connect to Internet via 3g Datacard in F15 and Its not getting connected.
View 2 Replies
View Related
Jan 15, 2010
I installed a new 11.2 and now my huawei e1692 works (thanks to huawei e1692 don't work -
openSUSE Forums).
kde=Versione 4.3.4 (KDE 4.3.4) "release 2"
kernel=2.6.31.5-0.1-desktop
[code]...
View 4 Replies
View Related
Apr 15, 2010
I want to know how to connect tata photon+ mobile broadband service in redhat el5,like drivers needed,procedures to install,where can i download the driver.
View 3 Replies
View Related
Sep 11, 2010
I've just installed openSuse 11.3. How can i connect to the internet. The Mobile Broadband tab on YaST is not clickable. On Linux Mint that tab is available.
View 2 Replies
View Related
Jan 25, 2011
I am new to Linux .I am using ubuntu gnome desktop and i can connect to Internet via huawei e160 HSDPA usb stick easily.In Ubuntu network manager shows my broadband connection and by that i can connect.Few weeks back i install Slackware KDE desktop and still i couldn't connect to Internet.If some one know how to do it.
View 1 Replies
View Related
Feb 20, 2011
I am trying to use the HUAWEI E1756C USB stick to connect to the internet. Installing usb_modeswitch and usb_modeswitch-data allowed networkmanager to "recognize" the stick and set up a mobile broadband connection.
The result is that NM succeeded in connecting (one of every five attempts) but firefox does not surf, nor emails can be downloaded etc. Just like if not being connected. The USB modem shows the steady blue LED as connected.
A NM issue? I have tried disabling NM control and tried with PPP clients like NMTSMON, wvdial and even Sakis3g. All with the same results. They seem to connect and show flux up and downloaded but no surfing.
resolf.conf shows is pretty much empty and no DNS there.
The working settings in Window$ are:
Same settings with Sakis3G, or NMTSMON or NM result in connection with no action from applications that use the internet.
I have had a similar issue with WLAN each time I change to a different network. I solve that by forcing to update the DHCP. I mean using -su dhcpd wlan0
But attempts like dhcpcd ttyUSB0 or dhcpcd ttyS0 get the same result. So no idea if this is an DHCP, or DNS or another issue.
My box is an ASUS EEEPC 2005H netbook with OpenSuSE 11.2 and KDE
View 2 Replies
View Related
May 9, 2011
i need help to connect bsnl dataone broadband.with DSL.i have tried above procedure but connection get failed.
View 2 Replies
View Related
