Ubuntu Networking :: Can't Configure Vpn Connection
Mar 5, 2010i am not aware how to configure pptp and vpn connection ?
View 2 Repliesi am not aware how to configure pptp and vpn connection ?
View 2 Repliesi just successfully downloaded and installed ubuntu koala (9.10 i think...) and its a great interface. i am just having extreme difficulty trying to set up the wireless connection. when i log back in osx, i am able to access the router and use the internet as i am doing now when i post in the forum. i am just trying to learn how to configure the wireless in ubuntu as well. have someone who has successful been able to connect wirelessly on an imac, or apple laptop in ubuntu.
View 7 Replies View RelatedIn WindowsXP I am able to assign multiple IP Addresses to a single LAN Card/NIC Port by clicking "Internet connections> Local Area Connection>Internet Protocol (TCP/IP)> Advanced> Add".
Is there a way to configure an Ubuntu 8.04 LAN connection to use more than one IP address?
My father recently installed Ubuntu 9.10 on my new AMD dualcore, but we have not been able to access the net.we tried resetting the modem/router. Windows XP had no problem getting us online - why is it such an issue with Ubuntu?
View 3 Replies View RelatedI tried to configure my vpn connection using pptp from the shell following following tutorial: [URL] now, if i use Code: pppd call novax to connect to my vpn i see following appearing in /var/log/messages:
Code:
Feb 10 21:11:57 reg-laptop pppd[2655]: pppd 2.4.5 started by root, uid 0
Feb 10 21:11:57 reg-laptop pppd[2655]: Using interface ppp0
Feb 10 21:11:57 reg-laptop pppd[2655]: Connect: ppp0 <--> /dev/pts/0
Feb 10 21:11:58 reg-laptop pppd[2655]: CHAP authentication succeeded
Feb 10 21:11:59 reg-laptop pppd[2655]: MPPE 128-bit stateless compression enabled
Feb 10 21:12:00 reg-laptop pppd[2655]: local IP address 10.243.249.22
Feb 10 21:12:00 reg-laptop pppd[2655]: remote IP address 10.243.249.20
verifying with ifconfig, my ppp0 ip is correctly set to 10.243.249.22 - i can also ping this ip but i tried to ping other ips in our network and i can't reach any of them - did i mess up the route maybe? Content of my /etc/ppp/ip-up.d/route-traffic:
[Code]...
I cant configure internet connection.
View 3 Replies View RelatedI have attached the screenshot of the option which I select in Windows for making the same internet broadband connection. I am unable to find the same option in Ubuntu 10.04. Till now I was using the Pppoe Dialup. But now I am unable to configure this one.
View 9 Replies View RelatedI've installed Ubuntu 10.04 on my classmate's Lapie after he got frustrated with Windows 7
Everything is fine except LAN connection wired one...
Can anyone tell me how to confiure that..& from where ?Like his IP addressis 192.168.68.10 with subnetmask 255.255.255.0
Plz guide me for this...Bcz many of my fellow hostelmates are for Ubuntu if I configure it out.
I'm trying to configure my Linksys WRT54G2 wireless router for my DSL connection. I select PPPOE as the connection type and when I go to connect I get the message cannot get ip address from ppoe server.
View 1 Replies View RelatedI have installed OpenVPN for network-manager using "sudo apt-get install network-manager-openvpn". Now I have it in my network-manager, but I dont know how to configure a connection, I have a configuration script, when I import that script in network-manager it automatically creates a connection, but still problems exists ...
View 3 Replies View Relatedi am having problem with setting up an internet connection on ubuntu plateform , presently i am running internet on xp plateform and want to switch to ubuntu plateform . i am connected to the internet through broadband connection by using modem. it's a dsl connection so plz tell me how to configure internet connection
View 1 Replies View Relatedcan anyone tell me the difference between the linux ad-hoc connection and window ad-hoc connection .....is it possible to make ad-hoc connection in fedora 14
if it so. how to setup ad-hoc connection between two laptop.
I am deployed to Iraq and the Earthlink ISP here uses PPPoE to configure a connection to their wireless broadband. His english skills are pretty good and from what I gather, he's got a DSL connection that he's trying to connect me to. He showed me how he does it on a Windows machine but I can't figure it out on my ubuntu laptop. That windows machine didn't need any IP addresses or server names. It only used a username and password to connect. Of course a strong wireless signal detected was also pre-requisite.
I know my laptop works because I've had great success with it here lately, just not on the Earthlink service.I see their wireless is broadcast and I can connect to it. I just can't figure out how to post my credentials and authenticate.I don't see a way of entering my username and password because I don't know how to install (or configure) for PPPoE.I did use the pppoeconfig and got to the part where I add my username and password, but most of what's going on up to and after that, I do not have the knowledge base to use. So I figured that allowing the defaults and recommended settings would be acceptableYou'll have to forgive me if I've asked another dumb question here. I'm another one of those Linux enthusiasts who is learning and I'm just not willing to switch back to MS just to get internet while deployed.
I have an internet connection which requires pppoe setup to login with the specified username and password ip address is dynamic.Above are the screenshots for your reference for which I establish the internet connection.the pppoe settings can be done through "sudo pppoeconf" but for the screenshot No. 2.what is the procedure? I need to specify the service name for my internet connection.how to configure my internet connection.
View 8 Replies View RelatedI want to connect my pc to my laptop. I have fedora 12 installed in both system.How can I do this?
View 14 Replies View RelatedI have wireless adapter USB rt1878 working fine.I have to setup pppoe to make internet connection?I need this help?
View 3 Replies View RelatedI have wireless adapter USB rt1878 working fine.I have to setup pppoe to make internet connection?I need this help?
View 1 Replies View Relatedv10.4 {I have completely re-edited this thread because I have started over fresh. I am no longer using bind9, but now using the installation-defaults nameserver and dhcp and trying to get a handle on how things ought to be setup properly. My previous attempts was a disaster.}
Coming fresh out of a newly installed 10.4, I obviously was able to get network connectivity but then I ran into trouble the minute that I tried to change eth0/eth1 connections via network-manager's applet. What I found was, that when I attempted to define static connections, all bets were off. It seems that once one attempts to change eth0/eth1 which are wired devices, I was no longer able to recover my network connectivity!
I was however able to setup a wireless connection, so in this way I was able to get back network (and Internet) connectivity, and write this thread on this forum. I notice also, that there is no longer 'Networks' in the System->Administration menus! Geez, what the hell is going on? how to properly configure my static wired connection? Networks in 10.4 have really changed alot!
The symptom is that NetworkManager repeatedly ask for password to connect to my AP.My AP is secured with WPA-PKI. The problem even happens with Fedora 11 live cd if I'm not quickly configure wireless connection using NetworkManager right after Fedora completes booting up. It means if I promptly configure wireless connection, i'm still able to access Internet. Same thing happens for the first boot of Fedora from hdd. For the second boot or when I dont quickly configure wireless connection when system finished booting up, NetworkManger repeatedly asks for password for AP.
I did try several approaches posted in this forum but problem still persisted. Some of approaches I tried are:
[Code]....
I am using Ubuntu Intrepid now, (no more Karmic, at least for some time)...
I connect to Internet through a proxy server. I have to configure my connection by going to Network Manager and then editing IPv4 settings, making the address selection manual instead of DHCP and then enter the static IP provided to me by the server and also the address of my gateway... Then I have to go to the Network Proxy under System --> Preferences and set my system proxy (Apply System Wide)...
Well that seems normal, except that I have to do the connection configuration part every time I reboot... Every time i reboot, the connection is back to default i.e.
Quote:
Name: Auto eth0
IPv4 Settings --> Method: Automatic(DHCP)
I have to change it again to
Quote:
Name: IST-LAN
IPv4 Settings --> Method: Manual
IP Address: 192.168.xxx.xxx
Netmask: 255.255.255.0
Gateway: 192.168.xxx.xxx
One of my friends reported the same thing to me after a fresh installation... So maybe that is a bug in the Network Manager of Interpid... I need to know a workaround, or a repair.
In Damn Small Linux? I have a dinosaur computer I need to use for something, and there's no ethernet port. But there is USB. On the internet box my ISP provided there's a port for a usb cable. But I plug it in and there's no connection. Tried Vector too. Is there a terminal command to make it work?
View 9 Replies View Relatedhow to configure net connection in ubuntu?
View 1 Replies View Relatedi configured DSL Connection using my broadband username & Password and while Connecting to net i used to click that Dsl connection to connect to net......but my connection does not last for long...it gets disconnected and shows wired connection s connected....so i have to click again(DSL Connection) to connect to net...... sometimes even i click for two or three times ....it wont connect...
i also need any other ways to configure DSL Connection in Command line ......do i need to configure PPPOE with username and password in command line using (sudo ifconfig pppoeconf)
How to configure a WiFi connection under redhat?
View 2 Replies View RelatedHow to set up internet сonnection in ubuntu...I have TCP / IP connection through the network card
View 9 Replies View RelatedCan anybody suggest me how to configure my RHEL-5 for USB internet connection(if u r in India, I want to configure AirTel USB internet connection) ??
View 1 Replies View RelatedIs there a command I need to type from the pure CLI other than:
Code:
To configure a WEP-enabled Internet connection from a pure CLI (no X running)?
I am new to Linux. Just installed Ubuntu 10.04 few days back. The problem I am having is not able to connect to internet. Mine is direct cable connection using CAT5 cable terminted to my ethernet card. and I connect to the net using a dial-up connection. I think other end of the cable is terminated to a common switch.I have tried searching it over net. The only thing I could figure out is that I have to do some configuration on pppoe (am i right?)Are there any commands I have to enter or anything like we used to do in windows?
View 8 Replies View Relatedhow to configure satellite connection dvbs technic set cards
View 3 Replies View Relatedim trying to setup a mail server i am with fedora core, postfix and i have a dsl internet connexion my ip is dynamic so i readed some tutorial on how to configure postfix
Quote:
myhostname = mta1.domain.com
mydomain = domain.com