In WindowsXP I am able to assign multiple IP Addresses to a single LAN Card/NIC Port by clicking "Internet connections> Local Area Connection>Internet Protocol (TCP/IP)> Advanced> Add".
Is there a way to configure an Ubuntu 8.04 LAN connection to use more than one IP address?
The configuration is completely different than any other version of linux i've used.
View 2 Replies View RelatedHow do we configure to resolve for hostnames when an IP address is provided to the DNS server.
Things I tried
The DNS daemon was started by the resolution failed. Find the logs below
** server can't find 11.127.168.192.in-addr.arpa: NXDOMAIN
I am having a persistent problem with getting a wired network connection under a recent install of Ubuntu 9.10. The network manager will show the wired network as 'disconnected' after a restart. This is true whether I am connected directly to my ISP's modem, or through the Linksys router that I usually use.The output of ifconfig suggests that eth0 is not being assigned an IP address:Code:I have reached the limits of my own ingenuity.
View 9 Replies View RelatedSo I got Ubuntu 9.10 on my laptop working really neat and wanted to upgrade my desktop to 9.10 as well. So I reinstalled Ubuntu there and now I can't connect to my network anymore....
I have a usb wireless adapter (currently Sitecom as I bought a new one today to hopefully fix it, but ended up at exactly the same problem as with my old adapter). The network manager I'm using now is Wicd since some topics I was looking through were about malfunctioning GNOME network-manager (which I removed) and suggested to try this. The GNOME network-manager kept prompting to insert my WEP network key which was a correct one. When I removed all security from the network it didn't prompt anything anymore but just failed to connect. The Wicd network manager is so nice to tell me that it cannot obtain the IP address however, so I suspect that this is my main issue... but I have no idea what I can do about this? Tried using a static IP and then I get the message "Connection failed: Could not contact the wireless access point."
I feel powerless as my knowledge here is just lacking..
I am trying to find out if it is possible for me to have a static ip address with my 3G usb modem ? I am using gnome network manager in Ubuntu 10.04 but it there is no option for me there for a static IPV4 address. I know with a wireless or ethernet connection you would modify /et/dhcp3/dhclient.conf and/or /etc/network/interfaces. I don't think those two would do for a PPP connection. When I go to /etc/ppp/ I see no .conf file that I could modify.
View 2 Replies View RelatedRunning kubuntu karmic, kernel 2.6.31-19, on Asus EEE PC 1000.
WICD 1.7.0. hangs on "wired connection: obtaining ip address...". I have downgraded to 1.6.2 and 1.5.9, but this did not solve the issue.
WICD does work under other circumstances, e.g. wireless connection. (But at home I don't have wireless, but just the modem and ethernet.)
Same wired connection ethernet connection works flawlessly on laptop running Windows XP SP2.
i am not aware how to configure pptp and vpn connection ?
View 2 Replies View RelatedI am a windows user with no linux experience prior to Friday. Im setting up a music server (SqueezeCenter) running Fedora 10.
With the help of posts of this site Ive made good progress with complicated stuffnamely getting Samba and VNC working. My Fedora machine and my windows machines now see each others shared files, and I can control my Fedora machine from my windows machine. (The Fedora machine will ultimately be headless.)
But Im having trouble with a seemingly simple issue setting up my Fedora box with a static IP address. With DHCP enabled on my network Ethernet adapter, all works fine. I then used the System>Administration>Network menu to disable DHCP and to assign the same IP address that DHCP chose. When I do this, two cases need to be distinguished:
1. If I keep the box checked for Controlled by Network Manager, the Network Manager Applet reports a network connection, I nevertheless cannot access the internet, but my Fedora machine is able to communicate with my Squeezebox music player (connected to my network via my DSL modem Ethernet connections, and with a fixed IP address). 2. If I uncheck the box Controlled by Network Manger, then the Network Manager Applet reports no network connection and my Fedora machine is not able to communicate with my Squeezebox music player (and I of course have no internet connectivity).
Ive seen references on other posts suggesting that the Network Manager service be disabled. But I see no way to manually configure the network.
I am facing an error when I run the following command telnet localhost 7777
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
In my working environment have 40 system .Its ip address is given manuallyto connect each for lan connection .40 are not using ubuntu while other using windows .My question is there any package to trace ips of entire system
View 9 Replies View Relatedi just successfully downloaded and installed ubuntu koala (9.10 i think...) and its a great interface. i am just having extreme difficulty trying to set up the wireless connection. when i log back in osx, i am able to access the router and use the internet as i am doing now when i post in the forum. i am just trying to learn how to configure the wireless in ubuntu as well. have someone who has successful been able to connect wirelessly on an imac, or apple laptop in ubuntu.
View 7 Replies View RelatedMy father recently installed Ubuntu 9.10 on my new AMD dualcore, but we have not been able to access the net.we tried resetting the modem/router. Windows XP had no problem getting us online - why is it such an issue with Ubuntu?
View 3 Replies View RelatedI tried to configure my vpn connection using pptp from the shell following following tutorial: [URL] now, if i use Code: pppd call novax to connect to my vpn i see following appearing in /var/log/messages:
Code:
Feb 10 21:11:57 reg-laptop pppd[2655]: pppd 2.4.5 started by root, uid 0
Feb 10 21:11:57 reg-laptop pppd[2655]: Using interface ppp0
Feb 10 21:11:57 reg-laptop pppd[2655]: Connect: ppp0 <--> /dev/pts/0
Feb 10 21:11:58 reg-laptop pppd[2655]: CHAP authentication succeeded
Feb 10 21:11:59 reg-laptop pppd[2655]: MPPE 128-bit stateless compression enabled
Feb 10 21:12:00 reg-laptop pppd[2655]: local IP address 10.243.249.22
Feb 10 21:12:00 reg-laptop pppd[2655]: remote IP address 10.243.249.20
verifying with ifconfig, my ppp0 ip is correctly set to 10.243.249.22 - i can also ping this ip but i tried to ping other ips in our network and i can't reach any of them - did i mess up the route maybe? Content of my /etc/ppp/ip-up.d/route-traffic:
[Code]...
I cant configure internet connection.
View 3 Replies View RelatedI have attached the screenshot of the option which I select in Windows for making the same internet broadband connection. I am unable to find the same option in Ubuntu 10.04. Till now I was using the Pppoe Dialup. But now I am unable to configure this one.
View 9 Replies View RelatedI've installed Ubuntu 10.04 on my classmate's Lapie after he got frustrated with Windows 7
Everything is fine except LAN connection wired one...
Can anyone tell me how to confiure that..& from where ?Like his IP addressis 192.168.68.10 with subnetmask 255.255.255.0
Plz guide me for this...Bcz many of my fellow hostelmates are for Ubuntu if I configure it out.
I'm trying to configure my Linksys WRT54G2 wireless router for my DSL connection. I select PPPOE as the connection type and when I go to connect I get the message cannot get ip address from ppoe server.
View 1 Replies View RelatedI have installed OpenVPN for network-manager using "sudo apt-get install network-manager-openvpn". Now I have it in my network-manager, but I dont know how to configure a connection, I have a configuration script, when I import that script in network-manager it automatically creates a connection, but still problems exists ...
View 3 Replies View Relatedi am having problem with setting up an internet connection on ubuntu plateform , presently i am running internet on xp plateform and want to switch to ubuntu plateform . i am connected to the internet through broadband connection by using modem. it's a dsl connection so plz tell me how to configure internet connection
View 1 Replies View Relatedcan anyone tell me the difference between the linux ad-hoc connection and window ad-hoc connection .....is it possible to make ad-hoc connection in fedora 14
if it so. how to setup ad-hoc connection between two laptop.
I've set up a permanent DHCP lease for my MAC address. I did this hoping to resolve the fact that I share my Internet ADSL connection with my wife and my daughter (the latter a great bandwidth hog)!
View 5 Replies View RelatedI am deployed to Iraq and the Earthlink ISP here uses PPPoE to configure a connection to their wireless broadband. His english skills are pretty good and from what I gather, he's got a DSL connection that he's trying to connect me to. He showed me how he does it on a Windows machine but I can't figure it out on my ubuntu laptop. That windows machine didn't need any IP addresses or server names. It only used a username and password to connect. Of course a strong wireless signal detected was also pre-requisite.
I know my laptop works because I've had great success with it here lately, just not on the Earthlink service.I see their wireless is broadcast and I can connect to it. I just can't figure out how to post my credentials and authenticate.I don't see a way of entering my username and password because I don't know how to install (or configure) for PPPoE.I did use the pppoeconfig and got to the part where I add my username and password, but most of what's going on up to and after that, I do not have the knowledge base to use. So I figured that allowing the defaults and recommended settings would be acceptableYou'll have to forgive me if I've asked another dumb question here. I'm another one of those Linux enthusiasts who is learning and I'm just not willing to switch back to MS just to get internet while deployed.
I have an internet connection which requires pppoe setup to login with the specified username and password ip address is dynamic.Above are the screenshots for your reference for which I establish the internet connection.the pppoe settings can be done through "sudo pppoeconf" but for the screenshot No. 2.what is the procedure? I need to specify the service name for my internet connection.how to configure my internet connection.
View 8 Replies View RelatedI want to connect my pc to my laptop. I have fedora 12 installed in both system.How can I do this?
View 14 Replies View RelatedI have wireless adapter USB rt1878 working fine.I have to setup pppoe to make internet connection?I need this help?
View 3 Replies View RelatedI am having difficulties in establishing a vpn connection using vpnc (or NetworkManaager-vpnc).
As long as the openswan IPsec daemon is running, vpnc-helper quits with the error message
Quote:
Failed to bind to 0.0.0.0:500: Address already in use
[user@computer ...]# vpnc-helper --local--port 0
If I use NetworkManager-vpnc, then establishing the connection simply fails.
Using the --local-port 0 option does not change anything.
If I stop the ipsec service (service ipsec stop) then establishing the connectiong works, both with NetworkManager-vpnc and the console tool, but apparently the network traffic is not routed via the VPN - in my case this means that I cannot access hosts within the vpn and stuff.
Funny thing is - on my notebook from where I connect via WLAN, everything works fine. With Fedora 13 everything works fine, too.
Does anybody have an idea how to enforce that the vpn connection is actually used?
I have wireless adapter USB rt1878 working fine.I have to setup pppoe to make internet connection?I need this help?
View 1 Replies View Relatedv10.4 {I have completely re-edited this thread because I have started over fresh. I am no longer using bind9, but now using the installation-defaults nameserver and dhcp and trying to get a handle on how things ought to be setup properly. My previous attempts was a disaster.}
Coming fresh out of a newly installed 10.4, I obviously was able to get network connectivity but then I ran into trouble the minute that I tried to change eth0/eth1 connections via network-manager's applet. What I found was, that when I attempted to define static connections, all bets were off. It seems that once one attempts to change eth0/eth1 which are wired devices, I was no longer able to recover my network connectivity!
I was however able to setup a wireless connection, so in this way I was able to get back network (and Internet) connectivity, and write this thread on this forum. I notice also, that there is no longer 'Networks' in the System->Administration menus! Geez, what the hell is going on? how to properly configure my static wired connection? Networks in 10.4 have really changed alot!
lost my internet connection on fedora 12 ? i try to assaing the ip address manual in the configruation part but no nothing happen I've tried googling for the problem
View 4 Replies View Related