Ubuntu :: Configure DSL Connection In Command Line?
Nov 15, 2010
i configured DSL Connection using my broadband username & Password and while Connecting to net i used to click that Dsl connection to connect to net......but my connection does not last for long...it gets disconnected and shows wired connection s connected....so i have to click again(DSL Connection) to connect to net...... sometimes even i click for two or three times ....it wont connect...
i also need any other ways to configure DSL Connection in Command line ......do i need to configure PPPOE with username and password in command line using (sudo ifconfig pppoeconf)
I'm sitting here at school, and I need to forward a port from my router at home to my Ubuntu box also at home. I stupidly forgot to turn on external administration on the router, but I can still SSH into the server. Is there a way I can access the router through the server via the command line?
My daughter just broke her laptop screen. I can order another LCD - no problem, but until then she wants to use an external monitor. With Windows, this used to be no big deal, because I would hook up a monitor, hit a key combo on the keyboard, and everything would come up on the other monitor.I know how to do this using the GUI, but unfortunately, I can only see about a 2 inch strip at the top of her computer. I can see the gnome menu bar, and when I go into the Nvidia configuration, I can't make out anything below the tops of the two monitors it detects. (I was able to get it to detect both displays, but I can't see to press the "configure" button.)What I need to do, is configure the new monitor from the command line using the two inches of visible monitor that I have at the top of her broken LCD.
Is there a way I can configure gnome-panel with the command line? I want to be able to write a shell script to switch between my AWN desktop setup and my gnome-panel one.
Also (this is less important) is there an easy way to switch between Gnome and KDE? I would assume no, but if there is that would be cool.
Ive been struggling to configure a wireless interface on Fedora 9I need to configure wlan0 command line only with NO display managerIve tried setting up /etc/sysconfig/network-scripts/ifcfg-wlan0 with the right information, doing dhcpbut no ip is retrieved. Checking the dhcp server logs on the DHCP server - no request is received.The link light on the wireless nic is not on either. iwconfig shows it has an Access point associated and an ESSID but im not getting back any IP.There seems to be very little documenta on how to set up wireless nics command line only on Fedora
I just recently installed ubuntu server. I want to be able to install packages and such but can't until I connect to Internet. I tried wifi but couldn't figure out how (I'm a n00b) but now I have ethernet and can't figure out how to make it work. So my question is, how do I connect to my Ethernet with ubuntu server, I could if I had graphical, but I can't get that until I have Internet. I didn't configure network during install, so how do I do it now?
I had to uninstall a proprietary ATI driver because it wrecked my X server. Apparently I removed the wrong package, because now the X server won't even start, even with the "nomodeset" flag.
QUESTION 1.How can I configure WiFi on the command line with NetworkManager or ifup, whichever is easier?
QUESTION 2.Which packages do I need to download to restore the X server?
The title about says it! I have a major problem on my laptop after installing updates. Some of my icons in the top panel are broken. So as a first step I need to reinstall a few things. The first step is to start the wireless connection from the terminal. So would someone please tell what the command is?
ifconfig dsl up ifconfig up dsl ip link set dsl up
But I think I should have typed:
Quote:
ifconfig ppp0 up
Yesterday I was lost, I updated the drivers for the nvidia card and that broke X, since my internet is not up and running when booted I was wandering how to call it from the command line since that was the only thing I could see.
I'm new here but have been using different distros for a couple of years. I ran into this problem like a year ago for the first time and I really would like to solve this ( with your help now). I've already used hours trying to figure this out and seeked solutions online. So first things first:
- I want to connect to a wireless access point from CLI (for many different reasons) - I'm using Fedora 13 with KDE and Gnome some specs:
is there any way to do a 11.04 Alternate Command Line Install without Internet Connection? I try to install Ubuntu on a Internet-Tablet, wich has no Ethernet-Port and I don't know how to get Wifi to work during Alternate-Install. At previous Ubuntu versions it was possible to let network be unconfigured and install completely from CD or USB-Stick. Isn't this possible in current versions?
The GUI for network configuration of Fedora is marvellous such that the configuration is almost fool-proof. But how can I make the connection by hand in the command line mode? It goes okay except the very last step. When I disconnect the eth0 interface from the right-hand side of the desktop GUI, I tested how to bring it back by command line but I failed. When disconnected, the ifconfig still shows the eth0 interface, with just the ip address portion changed.
I tried "ifconfig eth0 192.168.1.xx" to give it an ip address but the connection is still down even if the ifconfig shows an ip address for the eth0 interface. Then I tried "/etc/init.d/network restart" and "ifup eth0" and also "route add defaut gw 192.168.1.1" but none of these could accomplish the same work as a single click on the GUI to connect. I am very curious about how to do it in the terminal.
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
I am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
how to pass something more than a one-command startup for gnome-terminal. I will give an example of what I'm trying to do here:
Code:
#! /bin/bash # #TODO write this for gnome and xterm
[code]....
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
$cmd If this script is executed, an error is generated. The reason written was that "The execution fails because the pipe is not expanded and is passed to date as an argument".What is meant by expansion of pipe. When we execute date | wc on the command line, it goes fine.then | is not treated as an argument. Why?
which does not work on the invisible directories (why?). When I used ".*" as wildcard it changed all (visible) files including the parent directory (the one I was currently working in which is the "dot") . I can change the invisible directories owner and group using dophin but how is it done from the command line?
I am trying to learn how to pass more than a one-command startup for gnome-terminal.
I will give an example of what I'm trying to do here:
Code: #! /bin/bash # #TODO write this for gnome and xterm USAGE=" ${0##*/} [-x] [-g] code....
However, running with the -g option to invoke gnome-terminal, I get a "There was an error creating the child process for this terminal" error.
This same error occurs if the gnome-terminal line is changed to
Code: gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
Using netbook asus 1005ha with lucid beta 1 with most of updates on learning to use the CLI and headaches cd command does not seem to reconise directories here is a sample
Code:
yeh i know read the f#####g manual i am but any help would be greatly accepted tried sudo with same commands same problem did have a problem on my debian system that was to do with paths this is not the same on a different footnote anyone thinking of upgrading to lucid sit tight on 9.10 there are still to many issues that need ironing out for a system that is your main system.
I am using Ubuntu Intrepid now, (no more Karmic, at least for some time)...
I connect to Internet through a proxy server. I have to configure my connection by going to Network Manager and then editing IPv4 settings, making the address selection manual instead of DHCP and then enter the static IP provided to me by the server and also the address of my gateway... Then I have to go to the Network Proxy under System --> Preferences and set my system proxy (Apply System Wide)...
Well that seems normal, except that I have to do the connection configuration part every time I reboot... Every time i reboot, the connection is back to default i.e.
Quote:
Name: Auto eth0 IPv4 Settings --> Method: Automatic(DHCP)
One of my friends reported the same thing to me after a fresh installation... So maybe that is a bug in the Network Manager of Interpid... I need to know a workaround, or a repair.
In Damn Small Linux? I have a dinosaur computer I need to use for something, and there's no ethernet port. But there is USB. On the internet box my ISP provided there's a port for a usb cable. But I plug it in and there's no connection. Tried Vector too. Is there a terminal command to make it work?
