Ubuntu Networking :: Tata Photo Card No Longer Detected After Firmware Upgrade
May 14, 2010
I am using Ubuntu 10.04. The Tata Photon+ card Huwai EC1260 was working flawlessly. However, I recently did a firmware upgrade on the card that was provided by Tata Indicom for it to work on Windows 7.
After that, the card is no longer detected as a mobile modem in Ubuntu. If I try to add a new connection, all options are disabled (whereas earlier Tata Photon card would appear automatically).
The product ID has changed. What change can I make to Ubuntu to enable it to detect the card again.
View 6 Replies
ADVERTISEMENT
Aug 27, 2010
I have a Realtek gigabit onboard ethernet (RTL-8110SC/8169SC)It was working in 9.10.After upgrading to 10.04, the connection dropped to 10MB. Now, lspci -v shows the card, but Ubuntu no longer recognizes eth0!I have no connection on the machine. I've been digging around the forums, but can't seem to find what I need.
View 2 Replies
View Related
Dec 14, 2010
for some reason my graphics card is no longer detected by Ubuntu, just and hour ago everything was working perfectly (as Ubuntu usually does for me) and now it acts as if it's not there.
View 9 Replies
View Related
Aug 17, 2011
No wireless after upgrading to linux kernel 3.0 in opensuse 11.4. I'm using Kde and gnome 3, everything was working fine under the 2.6.39 kernel, but now both only detects my wired connection. Any help resolving this would be greatly appreciated. I have a Netgear WNDA3100 adapter that uses the Atheros drivers. It also is no longer detected in my Fedora 15 after upgrading the kernel, but it still works in Mint 11 with the 2.6.38.8 kernel.
View 9 Replies
View Related
Jan 29, 2011
I have a msi netbook with ubuntu netbook remix installed and it was working great until yesterday when suddenly it stopped detecting my home network. There are no problems on my two other machines, so I'm sure the problem is the netbook. I have no idea how to go about troubleshooting this. I was hoping someone could help me by giving me a place to start.
View 2 Replies
View Related
Mar 1, 2010
I have an absolutely bizarre hardware issue (concerning the Atheros AR8132 PCI-E Fast Ethernet Controller) that has been giving me quite a bit of grief for a while, and having completely hit a wall on this one, I'm a reasonably-experienced Linux user of several years, and have been running Ubuntu 9.10 on an Acer AOD250 netbook for several months out. I know that this model has wireless issues out-of-the-box (easily fixed), but it did not have any noticeable ethernet issues. That is, until I attempted an installation of Arch Linux.
During the Arch Linux installation, the ethernet card was initially detected, but unable to be used (because of a bad module in the kernel released with the installer). As I didn't know the fix for this at the time, I decided to reinstall Ubuntu 9.10. This time, however, the system failed to recognize the wired ethernet whatsoever. Instead, the external activity lights for the port (green and orange) are ALWAYS on, yet the device doesn't function.
I have done a successful install of the latest drivers directly from Atheros for the device and have them automatically loading with the kernel during boot, but as the device isn't recognized, the drivers aren't doing any good. Relevant information:
Code:
root@niobium:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code]...
View 3 Replies
View Related
Aug 7, 2011
I recently decided to make use of a computer that had been put away for a while by installing ubuntu on it. I went to do a full install of 11.04 (deleting all files and the other OS, windows) and everything went smooth until I realized that the wifi-card firmware had been deleted along with everything else. I can use an ethernet cable to connect to the internet, but no wi-fi. I tried googling to find the appropriate firmware, but none worked.
View 9 Replies
View Related
Mar 25, 2010
I have a ZTE HSUPA USB Modem Model:MF636 which used to work great and then is not longer detected.
I am using Fedora 12 and was having problems with the modem not been properly detected and filed a bug, which turned not to be a problem of NetworkManager, but an issue with udev.
https://bugzilla.gnome.org/show_bug.cgi?id=603433
I followed instructions to edit /lib/udev/rules.d/61-option-modem-modeswitch.rules and then it worked fine.
Now the modem is again not properly detected. Here is a copy of the results from dmesg code...
I have tried restoring the file that I edited. It was back to the stated previusly reported. I also have tried to run an older kernel. Then I updated to the latest kernel available for Fedora 12. Nothing seems to work.
View 4 Replies
View Related
Nov 6, 2010
A reinstall (several) of FC14x86_64. Epson flatbed scanner V350 that worked well in FC13 is not being recognised /no coms
USB connection
Apps: epson driver, san xsane, simple scan, iscan (avasys.jp)
[root@richard-g8jvm Downloads]# lsusb
Bus 003 Device 003: ID 0d8c:0201 C-Media Electronics, Inc. CM6501
Bus 003 Device 002: ID 0a5c:2046 Broadcom Corp. Bluetooth Device
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 014: ID 04b8:012f Seiko Epson Corp. Perfection V350 (GT-F700)
Bus 001 Device 004: ID 04b8:0007 Seiko Epson Corp. Printer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iscan reports
could not send command to scanner
check scanner status
View 1 Replies
View Related
Mar 20, 2010
How to configure tata photan card in my linux operating system. I am using centos.
View 3 Replies
View Related
May 11, 2010
Tata photon card is not working in rhel4 and rhel5.
View 4 Replies
View Related
Jun 27, 2010
I have a dual boot with W'XP and RHEL 5. M/B is MSI.
In XP the LAN is detected but not in LINUX.
View 2 Replies
View Related
Apr 4, 2010
I have bought a new laptop with W7 installed. And I installed dual boot with Ubuntu 9.10 on it.I tried to connect my laptop to Internet by Ethernet port. It works with W7, but Ubuntu doesn't detect my Network card .After some research on Internet, I suppose that it's a problem of drivers for this card.Here some parameters I could get :
>ifconfig :
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
[code]...
View 4 Replies
View Related
Apr 30, 2010
I have just upgraded from 9.10 to 10.04 and now my wireless card isn't being detected as far as I know. It was working perfectly in the previous version. At the moment I've physically put an ethernet cable straight to the router.
[code]...
View 9 Replies
View Related
Jun 16, 2010
I'm in serious need of some help. The network adapter on the motherboard of my main machine apparently failed about noon today. This machine serves as the firewall and router for my home office LAN, and so it has two network adapters, the second being a PCI card installed in the only PCI slot of the mobo. The mobo's adapter served the WAN while the PCI card serves the LAN.Since the mobo has only one PCI slot, none of the other PCI cards I have on hand could be used. Instead, I pulled an unused PCI-e dialup modem card from the machine, and bought a PCI express gigabit card to put in its place.
The problem is that the machine (running Hardy 8.04.4 LTS) does not recognize the new card at all. Running lspci shows only the old PCI card that serves the LAN. Similarly, running "sudo lshw" shows only the old PCI card together with a virtual adapter that's part of my VirtualBox installation on that system.I then dual-booted into Vista Home and attempted to install the new card there, using the CD that came with it. Vista detected the card and asked for the disk, but then was unable to find any drivers on the disk!The box says the card is from Star Tech, and the instruction sheet says its model is ST1000SPEX.If anyone can point me to the correct module to add to the startup list and/or remove from the blacklist, that may get me going again.
View 3 Replies
View Related
Dec 3, 2010
I have brought a new DELL INSPIRON 1410. I installed ubuntu 10.04 but my ethernet card is not getting detected where as in windows 7 is working..
View 2 Replies
View Related
Jun 18, 2011
I bought a new TOSHIBA C660 - i5010 today and installed.Lucid Lynx 10.04 on it, but it has not detected my wirelessg broadcom 80211 (STA) driver debp interface.
View 1 Replies
View Related
Aug 27, 2010
I added to my machine PC running debian and others, ubuntu, pc wireless card:,the same card I used it on other machine, it ran nice.On the other machine i have Ethernet Controller instead of Class ffff.I installed the divers firmware-ralink and other realtek and network-manager, but nothing.on other machine, that was enough to run it correctly.and ifconfig dosn't give wlan0,iwconfig did't give characteristic of wlan0.does this mean that the bios didn't recognize it as a network card
View 3 Replies
View Related
Mar 1, 2010
im having some trouble connecting the wireless card to my wifi network, theres is a hint using the terminal
remora@remora-laptop:~$ sudo lshw -C network
[sudo] password for remora:
*-network DISABLED
description: Wireless interface
[code]....
View 6 Replies
View Related
May 7, 2010
I started on ubuntu 8.10 and my wireless card has always worked,Since i did a fresh install of ubuntu 10.04 it still seems to work to a point.I can see networks, click them and use a password to connect but it never seems to carry on, I typed the password correctly and after a minute it asks for it again.I have read a post about problems other people are having and that i need to install a different program.But i cant install another program if there is no wireless as apt-get doesn't work without internet connection.So... I need to download something that will fix it (possible update if one has been released) to xp (partition) then access xp partition from ubuntu and install it.
View 9 Replies
View Related
Oct 20, 2010
I have an issue with wireless connectivity on my laptop. Its a HP dm3 and the intel network adapter is supported as I can scan and detect wireless access points.However, when I attempt to connect to my home network, it fails and this is probably a result of two things: The BSSID is missing and/or the DHCP client ID is missing.I am running Kubuntu 10.10 32 bit
View 2 Replies
View Related
Jul 21, 2011
I'm running an ubuntu maverick server, and I'm having a slight problem with networking. I've only got one ethernet line running into my room, and I've got loads of computers. The server has 2 ethernet ports, one integrated into the motherboard, one on a PCI card that I took from my old server. The on board ethernet never worked on my old server- but I only tried it out post-install, it was hooked up to the card during install (For the record, networking on linux has *never* worked for me if I installed then plugged in the networking stuff after the fact). So I just used the card instead. Transferred the hard drive into a new machine, and lo and behold, it would only work after I transferred in the card from the old one. What I wanted to set up is a basic NAT system, where the network connection is routed through from my server to my main desktop- but when I run ifconfig, my card is not detected, just lo and eth0. How can I fix this?
View 3 Replies
View Related
Apr 7, 2011
I want to load Atheros wireless card to ubuntu linux OS having kernel 2.6.32.21. I have loaded the atheros driver and I observed the following log messages when card was inserted.
[ 55.732223] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 55.732294] pci 0000:04:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 55.810152] ath5k: disagrees about version of symbol ieee80211_free_hw
[code]....
My suspect was the driver was 2.6.35.1 kernel based i may need to update my kernel, but i have other laptop having 2.6.32-21 kernel and this card works fine.
View 2 Replies
View Related
Jun 5, 2010
recently installed 10.04 on his hp pavilion laptop and we got everything working fine, including the wireless internet. When he installed some recommended software updates his card is no longer being detected although wired networking is still fine.
ryan@ryan-laptop:~$ sudo lshw -c network
[sudo] password for ryan:
*-network:0 UNCLAIMED
[code]...
View 9 Replies
View Related
Dec 17, 2010
I have just installed Fedora 14 on my desktop machine and have just discovered that it can't detect my WiFi card. The card is an Edimax EW-7711In which the makers say will run with Linux. I know that the card works fine with Ubuntu because my brother uses the same card in his Ubuntu machine but he is away until after Christmas so I don't know what he did to make it work other than I know he used ndiswrapper and the Windows drivers that were supplied with the card. I have looked for ndiswrapper in the Fedora repositories but it doesn't appear to be there.
View 14 Replies
View Related
May 20, 2010
My network cards were fine under Wubi Lynx. I decided to upgrade to Ubuntu Studio Lynx on its own partition, and the DVD install routine failed to detect the network card. Where do I go from here?***1 ) Machine Brand and Model (PC/Laptop):Acer 1410 (dual amd64 netbook, about a year old)***2) Network Interfaces
>lspci
01:00.0 Ethernet controller: Atheros Communications AR8131 Gigabit Ethernet (rev c0)
02:00.0 Network controller: Intel Corporation WiFi Link 1000 Series
[code]....
View 3 Replies
View Related
Jun 13, 2009
I have a problem with Netgear Wireless WG311v3 card and it is not listed in "ifconfig -a". Network Manager does not see the Netgear card either, just eth0 the onboard wired NIC. Here is the result of lspci.
Code:
[root@mylinux ~]# lspci -nn
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2)
[Code]......
View 4 Replies
View Related
Jan 13, 2011
I have installed Fedora 14 on my new laptop Thinkpad T410 but the wireless card is not detected.
I tried to install the drivers but got error. How to install the driver.
[root@sheril sheril]# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) .....
View 1 Replies
View Related
Jan 26, 2011
I am running the latest version of arch linux on a Dell Latitude D420. So far everything has worked perfectly except the wireless. It seems that Arch does not even detect the wireless because ifconfig -a only gives me the loopback and eth0. I installed ndiswrapper as well as the drivers. lsmod | grep ndiswrapper shows that ndiswrapper is being loaded on boot. I tried to install the iwp3945 drivers, but they have become obsolete so pacman was unable to find them. I also tried installing the iwl3945 drivers as explained here [URL] but still no luck.
View 14 Replies
View Related
Apr 21, 2011
Been using Ubuntu for 1 yr now on my Dell Dimension 8250 but a newbie with my Averatec AV3270-EH1 laptop circa 2005. Ubuntu 10.04 does not detect the Integrated WLAN card/adapter. I've looked at all the forums/posts but none had the issue I have. When I type lspci into the terminal i get this back:
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
[code]....
And when I type in iwconfig:
lo no wireless extensions.
eth0 no wireless extensions.
View 1 Replies
View Related
