OpenSUSE Install :: Configure X Window On 11.4 And Older X86 Hardware With 32MB Graphic Card?
Jul 5, 2011How to configure X Window on opensuse 11.4 and older x86 hardware with 32MB graphic card?
View 9 RepliesHow to configure X Window on opensuse 11.4 and older x86 hardware with 32MB graphic card?
View 9 RepliesI installed openSuse 11.2 64bit (DVD version). Later I installed the graphic card driver. Then I noticed that it's not working well due to an improper installation (didn't use the manual that you provided here). So I uninstalled the driver. Then, after reboot, instead of a regular desktop, I get a CLI and I'm requested to enter my login information. But in the boot menu, if I enter to the failsafe option, then everything works fine. How can I change the CLI to the regular desktop?
View 9 Replies View RelatedI think i found out what was crashing my computer my Graphic card every time i start a game the computer goes down. I have a Ati Radeon 5570. Desktop Effects: Disabled System Info: 2d: fglrx 3d: ati I downloaded the Ati Drivers from the website after installing the Open Source not sure if that is causing a problem. Here are the steps i took. su - UNSUPPORTED="yes" sh ./ati-driver-installer-11-2-x86.x86_64.run --buildpkg SuSE/SUSE-autodetection zypper in fglrx* aticonfig --initial reboot It will crash whenever i start a game and randomly when i run ..... VLC etc.. Edit: Should i uninstall all opensource/ati and start over and if thats the case whats the best approach to this?
View 5 Replies View RelatedIn Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies View RelatedI had an older version of Suse 11.0 and did an upgrade new install to Suse 11.3 (Awosme)!.The only problem is now when I boot I no longer see my GDM login screens.This was located in /usr/bin/gdmsetup. I think this has something to do with the newer version of GDM. Is there a way to get the older GDM back with the Login window functionality?
View 1 Replies View RelatedSo I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies View Relatedi justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
I've got a problem to use intel graphic card and kde. When I enable opengl support it seems threa re refresh problems, botton now are visible, now not, it seems a blinking effect and when I move the pointer it seems kde try to re-draw the object but the object get invisible, so a relay mess. Xrender instead work but it's slow. Whit opensuse 11.2 all was ok. glxgears however shows me pretty good performance so I don't understand where is the problem.
View 7 Replies View RelatedI installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.
View 4 Replies View RelatedI'm a new user of slackware
is there is anyone know how to install driver of my graphic card..
I'm using slackware 13 and acer aspire 4741..
so i have motherboard with a integrate graphic card and, i want to to install a new graphic card ( geforce 6200A)when i boot my PC on new graphic card , i have a panic kernel and when i remove the new graphic card and boot with the old card => it works can i configure centos for the new graphic ? and where , what's folder ?
configution : centos 5.3
I belive there is a problem with my graphics card, because when I start a VMware vm with accellerated graphics, i get this message: Code: Cannot open file "/home/joe/.vmware/dndlogs/ * dndlog.conf": No such file or directory. 3D graphics acceleration will be disabled. This computer does not have a 3D graphics system supported by VMware Workstation. My laptop model is the ASUS U52F-BBL9 btw.
View 1 Replies View RelatedI just installed Debian 5 in my pc. I have made all the updates but my screen is a bit bright and the resolution isn't very good. I think that i need to install the graphic card driver but all the solution i find in google didn't work . My laptop is Toshiba satellite pro u400 and my card is Intel GMA 4500 MHD.
View 4 Replies View Relatedim running ubuntu 11.4 im trying to install amd catalyst 11.4 for my x1300 ati graphic card but when i installed it my system couldn't start and i had to start in recovery mode for removing tha package. i think i have done something wrong with the packages how to install ati catalyst 11.4 on my x1300 graphic card
View 1 Replies View RelatedI tried to install the NVIDIA graphic card drivers on my laptop XPS 1340, running with opensuse 11.2. There are two graphic cards, the integrated one and the NVIDIA one. I installed the drivers correctly by doing
wget ftp://download.nvidia.com/XFree86/Li...90.36-pkg2.run
su -c 'sh NVIDIA-Linux-x86_64-190.36-pkg2.run -q'
but when trying to configure the x-server
su -c 'sax2 -r -m0=nvidia'
I got the following error message in the /var/log/SaX.log NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
I have now a Nvidia card but how to make 3d work in Factory. Now I wonder if the Intel or Ati cards can do a better job and are easily to configure.
View 4 Replies View RelatedI have got notebook HP 4710s and I can't get drivers for graphic card ATI Mobility Radeon HD 4330. ATI repository for openSUSE and SLED doesn't working. Do you know when Can I get it?
View 2 Replies View RelatedI am new to Suse Linux. So please excuse me for this "funny" query. have read the threads: Configuring graphics cards in openSUSE 11.3
From here I went to this page: SDB:Configuring graphics cards - openSUSE Its mentioned on this page that: Upon installing openSUSE, the X system's automatic configuration may have failed to properly configure the graphics correctly. Typically this results in either a black screen upon reboot, or the wrong resolution being displayed on the monitor.
I have none of these problems. But after searching for inability of desktop effects to become activated, I found that nVIDIA graphic card drivers are must for these effects. After clicking "My computer" icon on desktop, I found Display Info as following:
Vendor: nVidia Corporation
Model: G98 [GeForce 8400 GS]
2D driver: nouveau
3D driver: nouveau Gallium (7.8.2)
Can anyone tell me 'Is nouveau an alternative for nVIDIA'? Is this the reason for no wrong resolution or black screen upon boot. That means my computer graphics are working correctly. Then why does Desktop Effects are not getting enabled.
After searching for Kaffeine media player extra codecs to play media files, I incidentally found the following options: I opened Yast Control Center @ linux-o26a Software> Add on Products > installed Add-On Products > Community Repositories > clicking Next, this opened a window with "List of Online repositories" where there is an option of "NVIDIA Repository". If I install it, will it enable the "Desktop effects"
I don't understand how i should install the driver for my code...
View 2 Replies View RelatedI bought ASUS K50c with SIS graphic card and have win7 on it (i install it alone).I want to install ubuntu!I found installation of ubuntu 10.10 and tried to install it. There is a huge problem with my graphic card because resolution is 800*600! I found installation of ubuntu 10.04 LTS and tried to install it. Again problem. I tried to download drivers from www.sis.com but there are tar.file and i don't now what is that or how to install it.In windows I now how to install anything, but there is a problem.I am ready to install any version of ubuntu just to solve this problem.
View 2 Replies View RelatedThe system has driver for intel, but the opengl version is 2.1. How to update opengl version to 4.1. (intel 945). For ATI just download driver version 11.5 and install it. All is OK.
View 1 Replies View RelatedWell, i guess it is the graphic card:
I tried to watch a flash video on full screen; then the screen went black with some glitches and then my laptop suddenly shut down. I couldn't start opensuse back again, the screen goes black and freezes. I tried restarting in windows, and it freezes too. However, opensuse in failsafe mode works.
After that, i tried reinstalling opensuse. This time, i can start normally, but after a while, the screen shows some glitch (the updater applet looked wrong) and freezes. Windows isn't loading either, but opensuse failsafe mode is still working ok.
I guess it is a hardware problem (since windows also crashes). However, i would like some help to run "diagnostics" to my system.
My graphic card is a nvidia 8400 gs, and i am running opensuse 11.3
I was using the nvidia driver i found in opensuse-community (installed quite a long time ago); however, after i reinstalled, i was using the default driver. It is possible that my kernel was updated a couple of days ago (but i am not really sure of that)
I have recently installed Centos. During the installation, I noticed that only sound was being tested during the installation. Once everything has been installed successfully. I can run Centos with no problem. However, when I tried to switch from one window (browser) to another. The display was slow. Thus, I suspected the driver for the graphic card of my PC is not being installed successfully. When I type /sbin/lspci | grep VGA in the terminal, I get the following output:
02:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd (rev a1)
03:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd (rev a1)
Then, I went to the dell support & driver site to download the driver. In the readme file, it is suggested to install dkms first before installing the graphics driver by typing rpm -ivh dkms-2.1.0.1-1.noarch.rpm
I managed to install the dkms without any error.However, when I use rpm to install the graphics driver as suggested by the readme file:
rpm -ivh dell-nvidia-190.42-1dkms_rhel5.3.x86_64.rpm
I get the following errors: error: Failed dependencies:
libX11.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64
libXext.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64[code]....
Since the above errors may be related to the missing packages then I use yum provides and install to find the missing packages. Even I try to install all the matched packages, i still cant install the driver for my graphic card. To be honest, i am not very sure whether I am doing the right things or not. how to solve this slow display problem when switching from one application to another.
I've got CentOS 5.4 without access to internet (install all from DVD).When I try ti run Eclipse via remote desktop I've got error:
Quote:(.:30196): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(.:30196): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
[code]....
I used to keep a back level kernel on all my systems along with the latest upgraded kernel. How is that done using Yast/zypper? I don't see an option to keep the older version.
View 5 Replies View Relatedhow to install my graphics card drivers ATI Radeon X800. The easiest way is the best way, because I'm a noob, and new to all of this.
View 9 Replies View RelatedWhy does my boot loader(GRUB)graphic randomly change to penguins playing on ice.
View 3 Replies View Relatedi want to reinstall my OS, but use kernel 2.6.31.5 instead of 2.6.31.8. Are there settings in the install that I can change to do this automatically?
View 1 Replies View RelatedMy laptop is a Medion MD 96970 (bought at Aldi in September 2008) with
- graphic card nVidia GeForce 9300M G
- processor Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz
- 82801H (ICH8 Family) HD Audio Controller
- 3GB RAM and 300 GB memory
1) Originally, my laptop came with Windows Vista. Then I got a SUSE linux 11.0 CD, let it make a partition and installed Suse 11.0. Since Suse11.0 isn't updated any further I would like to change to Suse 11.3 (or whatever is newer). How should I proceed? (I can't find my old Windows Vista CDs and would like to KEEP THE PARTITION, thus formating all isn't an option)
2) In order to make a backup I bought a portable hard drive from iomega (USB 2.0). Then I noticed that it is formated in NTFS. SUSE 11.0 doesn't seem to like it --- what should I do? Can I reformat it somehow?
3) Suse 11.0 doesn't like my sound card. Thus I couldn't Skype or listen to music --- do you know if this problem is solved under Suse 11.3?
I was following this thread: Upgrade kde4.6>
But just before I clicked accept after saying switch system packages to kde4 repo (the one in that thread) I noticed loads of the packages were older than those installed. In the list it has installed (available) and lots of them were all highlighted in red, and the installed version numbers were higher than the available, yet I'm running kde 4.6.0.