I cannot seem to stop my computer from broadcasting an ad-hoc connection. I set it up using networkmanager, but now I cannot delete it. I searched Google and ubuntuforums for an answer, but no luck
View 9 RepliesI need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies View RelatedIts a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
I thought to uninstall Gnome Network manager since it was always asking for to connect with wireless internet but it was working fine with wired internet.I uninstalled it and installed wicd. and then for some unknown reasons the internet disappeared.Kindly let me know How can i get back network manager without having internet and make internet work on my computer.I did searched a lot on Ubuntu forums using somone's else computer but no success.So if you let me know how to approach the problem in right manner it shal be great .
View 6 Replies View RelatedI installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View RelatedI have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.
I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?
I am losing network bandwidth and I am quite frankly I am not sure why, I don't have allot memory 495.6Mib
But I clean my PC every few days "BleachBit"
I have read some where on the magazine Network receiving suppose to be higher. so how can I fix this issue please i am having allot problems, u use cable from Comcast
I am not quite sure what Information you might need from me to give.
I use Ubuntu 8.04 LTS
I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedI have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
I have Ubuntu 9.10 installed. Been using it no problem for months. I have a Belkin wireless USB. Worked fine. Until 8 days ago. Just stopped working. During troubleshooting I also discovered that the wired connection also does not work. Rebooted, checked settings, did all that. Nothing. I've plugged the network wire into another machine. It picked up IP via DHCP within seconds proving that it's not the network. I've tried everything that I can think of. What would cause the network within Ubuntu to just stop working? Wired and wireless. The only thing I can think of doing now is to reinstall Ubuntu.
View 6 Replies View RelatedI installed Ubuntu 9.10 using the default setup (Gnome I think) and on my Gateway Notebook using a wireless connection. It appears to be working great and I can even see my Windows drives and network storage on my home office systems.I have also set it up to run my favorite Bible software on Windows running under VirtualBox. I then installed the KDE Desktop so that I can select either desktop when logging on.
However, once I am in the KDE desktop, I cannot connect to the internet. I have checked and double-checked and the wireless settings seem to be the same on both the Gnom and KDE Desktops but still no network or internet connection when using KDE. I might mention that I am using the 64 Bit version of Ubuntu.
I am new to Ubuntu, and I have just installed version 9.10 on my desktop PC. I need to connect my computer to my home network. Right now, I have no connection and cannot detect any of the hardware when running Ubuntu. When I switch over to my Windows XP partition, everything works fine.
View 8 Replies View RelatedHi - I am new to Linux and Ubuntu so I have no idea how to fix or problem solve unfortunately I installed Ubuntu 9.10 from scratch recently on this laptop and all was good. I connected to my WIFI network no problem. It's WPA PSK encrypted, DHCP enabled. I just set it up in Network Manager and it was all fine. Then after a few days I installed a printer and some packages and updates via synaptics. The network connection started dropping after 20 mins or so. Only a reboot would restore it - auto connects at first, runs fine till it drops then never will reconnect. I posted on here, someone gave me some lines to put in a config file. I tried that. I didn't seem to help much, problem remained. Yesterday I checked for updates and there were a whole bunch so I just installed them all. Now I cannot connect at all. I have deleted and recreated the connection in Network Manager but it doesn't help. It tries to establish a connection but never achieves it. I am connecting to the internet now on the same laptop booted into Windows, so all the hardware is fine.
Can anyone who knows about ubuntu networking help? Do I need to do a complete reinstall? Seems a bit much, but it worked when I initially installed the OS. I want to like Ubuntu, but something as basic as connecting to the internet is pretty vital so reluctantly having to start using Windows again...
I bought a pc with ubuntu 9.10 pre-installed today. Unfortunately there's a problem with the network connection, i.e. I don't have any. The mb is a Foxconn A74ML series with onboard LAN. I've switched cables with another PC and it didn't have any effect. The other PC is still connected to the internet and the new one is still not connected. How I can/should do to get a connection?
View 5 Replies View RelatedI'm a complete beginner who just installed 10.04. I'm trying to follow guides to setup my internet connection, but I am completely unable to locate the Network Manager Icon. I have the notification area already, but there is no icon. I tried the instructions here
After inputting
nm-applet --sm-disable
It gave me:
** (nm-applet:1722): WARNING **: <WARN> constructor(): Couldn't initialize the D-Bus manager.
I just got my first laptop, an ASUS eee pc 1201n. It came with Windows 7, but i decided to load the latest version of Ubuntu Netbook Edition on it as well.Today when I tried to access the internet via my library's free wireless service I couldn't get Ubuntu to recognize any wireless connections. I checked with Windows 7 and several networks appeared, including my libraries, but Ubuntu was blank.
View 1 Replies View RelatedHow ubuntu 9.10 netbook is36 activate its network connection?
View 4 Replies View RelatedWondering if anyone can point me in the right direction to setup some form of network connection monitoring and logging?As Australia has CRAP broadband and ISP's utilize Peak & Off-Peak download limits I schedule downloads for my Off-Peak times. Well recently my connection drops out exactly when my off-peak time kicks in and requires my modem to be reset to re-establish my connection.
My ISP is denying they are doing this but I happens everyday now and is getting really frustrating. What I want to try and set up is some sort of monitoring to ping my ISP's default gateway so I can prove it drops at a specific time each day. I am sure there would be something I could configure in Ubuntu but I am a newbie to Ubuntu so don't really know how to achieve this.
connect to wired LAN in ubuntu 10.04? I think I have specified the IP address and everything correctly. But it says no connectivity. In windows it says connected but I am unable to open any webpage.
View 2 Replies View RelatedI installed Jolicloud OS with Windows XP before because Windows XP have too many virus to attachment to Internet so whenever I go on the internet, most of the link take us to random site so I just installed Jolicloud OS however, some reason, I don't like Jolicloud very much because it require to enter the user name and password to link Jolicloud so wasted my time to use it... Its cool but pointless.
So, I just realised Ubuntu also provided free Ubuntu OS for netbook. After I downloaded Ubuntu desktop 11.04 and installed the system (all the datas is now gone and only current OS is Ubuntu)So, once I installed it... The netbook seem running well and no problem however, there is a huge problem is wireless are not found so I can't even use the Internet!.This netbook only got wireless and nothing else to connect like cable (wired).
I want a program (shell script) to be executed as soon as my DHCP connection is established successfully. Is there any way I can do this ?
View 2 Replies View RelatedI am attempting to connect Ubuntu 9.10 to the Internet.I have a network connection, and Karmic detects it fine. I can ping addresses within our network (e.g. the Windows computer in the next room), and I can ping the router, but if I ping, say www.google.com, it says "Destination Net Unreachable". Previously, in Jaunty, I had a similar problem.I found a workaround: launch Pidgin. Somehow, launching Pidgin temporarily edits my configuration. However, in Karmic, I have no access to Pidgin, however, and Empathy does not do the same thing. Since I have no Internet, I cannot "sudo apt-get install" anything.How can I get the Internet working?
View 5 Replies View RelatedI've searched many forums, and I can't find out how to turn off the wireless connection balloons. I regularly switch between wireless networks, and it's really annoying to have two connect/disconnect notifications each time that I switch between networks.
View 2 Replies View RelatedI've got a Kubuntu Karmic install that I ssh into on a frequent basis. It stays running 24/7, but sometimes the power goes out, etc. and it reboots.
The thing is, when it reboots, before I log in to KDE, there is no network connection. It is only after I log into KDE that nm-applet (I use the GNOME one because it works better than KNetworkManager) makes the connection and gets an IP address. And it does so completely automatically...no customizations by me. If I try to connect manually (sudo ifup eth0) before log in, I don't get an IP address.
How can I get it to connect to the network and get an IP address at boot, before I touch it?
I have a windows installation (partition) but have installed into freespace on the same drive using the auto-partition manager, etc, and everything is fine. I got my network going fairly easily by going Preferences > Wireless and inputting SSID and WPA encryption key (PSK). My router issues an WLAN IP, I can get on the net, I can see my other Windows PCs on the network, I can reach my router, and all is good.So after several hours of mooching about and looking at things, I have updated all the Linux packages via Synaptics (following a prompt to update everything) including GRUB. My dual boot now shows two versions of the OS:
GRUB 1.7~Beta4
Ubuntu, Linux 2.6.31-19 - generic (I am booting this one)
Ubuntu, Linux 2.6.31-14 - generic
I also set up my HP F4580 printer over wifi on the network though with slightly incorrect drivers (for the F4400 series as this was recommended at the closest match). It works, and I can print a test page no problem.The only thing is that now (since doing all that) Ubuntu seems to periodically drop my connection to the network and then request the network PSK again, but when I enter it, it spends time trying to renegotiate but fails, and then re-requests the PSK, over and over and it never reconnects. I have to reboot and then I can connect again (automatically), until it drops at some random point (like 5 or 10 mins later)
After connecting my phone via bluetooth using Blueman and then activating Dialup connection in Blueman, it says "Now DUN is available in Network Manager" or something like this. But, there is NOTHING about DUN connection in NM. What this thing is telling about?
View 5 Replies View RelatedI can't make dsl connection using network manager,
View 9 Replies View RelatedIs network manager fixed in ubuntu 10.04, can I make dsl connection using network manager?
View 4 Replies View Related