Networking :: Slow/Lose Network History Receiving - Network Connection
Oct 12, 2009
I am losing network bandwidth and I am quite frankly I am not sure why, I don't have allot memory 495.6Mib
But I clean my PC every few days "BleachBit"
I have read some where on the magazine Network receiving suppose to be higher. so how can I fix this issue please i am having allot problems, u use cable from Comcast
I am not quite sure what Information you might need from me to give.
I use Ubuntu 8.04 LTS
View 1 Replies
ADVERTISEMENT
Jan 22, 2011
I have a strange problem that I cannot diagnose -- slow wifi. About two or three weeks ago, I noticed that my wifi began to slow down dramatically. The problem is the same on my ubuntu laptop and my ipad. But when I connect directly to the router with a network cable, my connection is fine. So it is definitely a problem with the wifi signal itself.
What I have done so far:
(1) I checked all of the MAC addresses connected to my wifi. I identified my tivo box, laptop, and ipad. Nothing else.
(2) I used [I]wifi analyzer[I] on my android phone and selected an unused wifi channel (channel 8).
(3) I changed the username/password on my wifi signal. I also changed the password for my router's admin privileges.
(4) I restarted my router and computer.
None of this helped.
I am using a Netgear WGR614 wireless router.
View 3 Replies
View Related
Jul 9, 2010
I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies
View Related
Mar 2, 2011
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
View 5 Replies
View Related
Apr 3, 2010
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies
View Related
Oct 31, 2009
Ever since the upgrade to CentOS 5.4 the system boots extremely slow and x-windows is virtually unusable unless the machine is connected to a network. It hangs at netstat, cups, httpd during the boot process. I utilize the operating system to create Asterisk servers and sometimes they are not connected to a network ever.
View 1 Replies
View Related
Jan 29, 2011
I have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.
I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?
View 4 Replies
View Related
May 17, 2011
I have recently moved countries and have finally got my internet connected today after a lengthy wait. I have a pretty fast connection - it's a fibre connection at approx 100Mbps Between my onu (modem) & computer (Lenovo SL510) I have a cisco wrt120N wireless router. I'm using Opensuse 11.3 (also dual boot with Win7)
My problem is . . . When I enter url in firefox (4) I get the message "looking up www. . ." for approx 5 to 15 seconds before anything starts to load. I also have the same behaviour in konqueror, firefox and yast software manager.
If I use Google Chrome the pages load instantly. Even never before visited pages.
A typical webpage such as Stuff.co.nz - Latest New Zealand News & World News, Sports News & NZ Weather Forecasts takes approx 20 to thirty secs to load in firefox and 3 seconds in Chrome. I can see the same behaviour always whether Chrome used first or firefox used first - so cache does not appear to be the issue.
If I boot into Win7 - websites load instantly there also.
I have updated to the latest wireless drivers for my system - but the behaviour is also evident if I attach a lan cable.
Here is a little info
Code:
/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 60:EB:69:AE:C6:28
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
View 7 Replies
View Related
Mar 10, 2010
It may have something to do with my recent installation and removal of tor, but I can't narrow down when exactly it began. I'm getting no better than about 5000B/s download rates for apt. This means just a download of the package list takes a good 5 minutes. Other networking seems to run fine, but synaptic and apt are crawling.
View 5 Replies
View Related
May 14, 2010
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies
View Related
Aug 12, 2014
I am using mini.iso to install Jessie from network and I need lose setup command that is required by cryptsetup for mounting the detached header of an encrypted volume. Is there a way to get losetup from network during installation? For example by means of anna-install? Does any package from udeb.list contain losetup?
View 0 Replies
View Related
Aug 17, 2010
Whenever I reboot my server, it looses all network connectivity. It can't see the LAN nor the internet. I have to issue the following:
Code:
ifconfig eth0 down
ifconfig eth1 down
ifconfig eth1 up
This will get the server talking to the LAN, but still not to the internet. To get that I have to do:
Code:
route add default gw 192.168.0.1
Then I'm up and running.
But why?
Granted I only have to reboot now and then (after a power failure, or, like last night where the server was actually heating the house too much on a hot August day) but why is this happening? It is like these settings are temporary and are lost on shutdown.
View 4 Replies
View Related
Jun 19, 2011
I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies
View Related
Jun 8, 2011
I'm running ubuntu 10.10, in a Gateway M-6750. I can't get my wireless to work properly.
After I lose my wireless signal, I can't connect to a network again. I have to restart my computer or, remove the ndiswrapper module and insert it again so that I can connect to the network again.
I do this with:
Also, there are sometimes when the computer freezes up when trying to search for a signal.
View 1 Replies
View Related
Dec 5, 2010
I have a Acer Aspire 7535-5020 laptop with a Atheros AR5B91 wireless adapter & lose my connection after about 10 minutes.The only way to reconnect is by rebooting.I read in another thread that installing the linux-backports-modules-karmic would solve the problem.However when I try to install it I get the message, Error Dependency is notsatisfiable:Linux-backports-Modules-2.6.31-22 generic.
View 4 Replies
View Related
Sep 7, 2010
I have an ASUS G50Vt laptop with Ubuntu 10.04 installed on it. I have a WiFi Link 5100 wireless device. I use these settings to connect to it:URL...My problem is, once I connect, within 30 seconds I lose my Internet connection. It goes on and off seemingly whenever it wants. Is there something I'm missing? Some kind of driver issue or something else I need to change?I can connect to the non-secure connections fine, just when I try to use the secure one it craps out. Halp?
View 6 Replies
View Related
Jul 31, 2011
I use a Westell 327W dsl modem/router to connect to the internet. I installed Ubuntu 11.04 on two computers. My desktop is connected with ethernet and works perfectly. However, when I connect my laptop with wifi, it causes the router to lose it's internet connection. All connected devices are affected. The only way to fix the problem is to shut off and turn on the router again. This problem only happens with with the laptop and Ubuntu. I use the same laptop with Win7, and it connects fine. I also have no problems connecting my Android phone or PS3 to the router. The wifi in the laptop is an Atheros model.
I have tried no security, WEP, and WAP. The result is the same with all three settings. I can still access the router config from any device 192.168.1.1 after the internet goes out. The DSL led on the router stays on, and the config says the DSL connection is active.
View 1 Replies
View Related
Mar 3, 2011
Im having trouble with my hp mini 110, i read abit of information about it on the site and installed a package that gets my wifi working, problem being is that as soon as I go upstairs i lose connection, its not really upstairs if I move more than 5 feet away from my router no internet although the laptop reads full signal.
I believe its a problem with the broadcom drivers, is there anyway to resolve this or do I have to go back to Windows 7 because I really dont wanna do that.
View 2 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Feb 20, 2010
Ok, the only thing I remember doing is changing out my hard drive because it went bad. I swapped in a new one and reformatted with Windows 7. (I can hear the boos and hisses as I type) Anyway, now file transfers are exceedingly slow. They are ~10KB/s when they should be ~40MB/s. The odd thing is that it mostly occurs on large files, but not all large files and sometimes smaller files are affected. Copying files from one hard disc to another on the server, as well as copying from the server to Win7. Local files are not affected. The problem does not occur on my laptop which has Slackware Linux on it.
Another thing about the problem is that when I mount a disc image on a virtual drive, access time is very slow and windows explorer is very unresponsive and often locks up completely.
I have a samba server with Slackware Linux on it and a Windows 7 client. DHCP is configured through dnsmasq. (dhpc-host=<mac address>,<computer name>) Every now and again, dnsmasq seems to conk out when I try to access the network with my Win7 machine. I then have to reboot the server, as my only access to it is via SSH and I don't have a video card in it. After the server reboots everything is fine until accessing the network with my Win7 machine conks it out again.
I've tried different MTU settings, different network cards on the Win7 machine(Dlink and realtek), various regedit hacks, but none of them produce any results.
View 3 Replies
View Related
Oct 27, 2010
I have a desklet that, occasionally after toying with network stuff, will tell me that large amounts of data are being sent/received. What's a good way to determine what processes are occupying these resources?!
View 14 Replies
View Related
Jan 21, 2010
We know that, in a network, data transfer time is dependent on capacity of the receiving node. I have two Linux systems A (sender) and B (receiver) connected. I want to simulate congetion in a network, that means I want to increse the time taken to transfer some data. I believe, I can do this if I can reduce the capacity of the receiver node B. That perhaps possible by decreasing the receiving buffer size of B. How can I change the receiving buffer size of this linux system B?
View 1 Replies
View Related
Dec 16, 2010
I've been asked to look at a system which is running slowly. It's running hardy on an intel Q9400 quad core CPU system which should be a pretty fast machine.
The most obvious symptom of this problem is that the terminal takes about 10 seconds to open instead of the usual fraction of a second.
What I've discovered so far is that the system has 2 network ports one configured to access the LAN and the other to connect directly to another piece of hardware using a different subnet. If the LAN is not connected the system runs slowly and if it is connected it runs at normal speed. It also makes no difference whether or not the second network port is connected.
I've looked at the system monitor and can see no abnormal network traffic or processes using a lot of CPU resources.
View 1 Replies
View Related
Apr 29, 2011
When first starting up I am not able to get a wireless connection, network manager says that wireless is disabled. Then some time later (can be up to five minutes after starting up) it will finally start working.I have tried rfkill list all, but it shows:
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
[code]....
View 5 Replies
View Related
Nov 16, 2010
Trying to watch movies between my systems and I'm getting upload speeds of 6.5 kb/s from my system to the one connected to the tv. I'm running Ubuntu on both machines, tried with VLC and XBMC. Both are running wirelessly but I know that this issue is new, I used to get at least a meg a second on LAN.
View 9 Replies
View Related
Mar 14, 2010
I've noticed over the past few months that my internet connection speed (D/Ls, browsing) are getting incredibly slow, but only on my linux box (my laptop, for instance, is fine - in fact, I'm dual-booting with WinXP and it isn't happening there, so I think I've managed to narrow it down to the OS alone):
View 8 Replies
View Related
Jun 7, 2011
I've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies
View Related
May 19, 2010
I was wondering if anyone could recommend a way a very lightweight MTA without network capabilities just for receiving local administration emails?I know I could restrict access, I was just wondering if there was something more lightweight designed purely for local use.
View 2 Replies
View Related
Nov 17, 2010
I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.
As a consequence all network services are not working. I can't connect to any other machine nor to the internet.
I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.
Any suggestions how to make it work again? I'm using Suse 11.3.
View 9 Replies
View Related
Feb 1, 2010
Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.
I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).
I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.
View 1 Replies
View Related
