Ubuntu Networking :: Start Network Connection Before Login ?
Feb 18, 2010
I've got a Kubuntu Karmic install that I ssh into on a frequent basis. It stays running 24/7, but sometimes the power goes out, etc. and it reboots.
The thing is, when it reboots, before I log in to KDE, there is no network connection. It is only after I log into KDE that nm-applet (I use the GNOME one because it works better than KNetworkManager) makes the connection and gets an IP address. And it does so completely automatically...no customizations by me. If I try to connect manually (sudo ifup eth0) before log in, I don't get an IP address.
How can I get it to connect to the network and get an IP address at boot, before I touch it?
View 7 Replies
ADVERTISEMENT
Jan 23, 2011
I recently purchased a new motherboard and processor to replace an existing system. I transferred the video card. OS remains the same, Ubuntu 10.10 x64. Video worked fine in the first system (eVGA motherboard, Intel E6600 CPU, 4GB RAM), but the old motherboard had a SATA controller issue. New system: Gigabyte GA-890FXA-UD5, AMD Phenom II X4 955 Black Edition Deneb, 8GB RAM
Transferred hardware:
Graphics: eVGA nVidia 8800GT,
Monitor 0: Hanns-G JW199D 1440x900@60Hz
Monitor 1: Gateway FPD1975W 1440x900@60Hz
The Problem:
1. Fresh OS install, everything starts up as expected, login, etc.
2. I use the Additional Drivers link from the menu and select the recommended nVidia driver and enable it.
3. After reboot, the following things happen:
3a. BIOS
3b. Ubuntu startup scripts
3c. Ubuntu logo with spinning dots
3d. Monitor goes black
3e. Monitor notifies it has lost sync
I believe 3d is where I would normally get the login dialog. I can use failsafe mode, but everything I've tried to fix the graphics display hasn't worked. I've even tried to load the latest nVidia driver, nvidia-config, nvidia-settings, etc. There are some options I've tried where the nvidia-x command returns "can't find device". I've tried to modify the xorg.conf file, to no success.
Any ideas what I can do to resolve the error? I'm not that strong on the xorg.conf file, but all I've read is that it's not too necessary anymore. Though, it was modified in my old system to get Twinview working. I've looked through a bunch of log files, but I may not have been looking in the correct log file.
View 3 Replies
View Related
Jul 9, 2010
I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies
View Related
Dec 4, 2010
I am running on acer aspire 5742 64bit on ubuntu 10.10 desktop edition and wanna know if there is only me that I having problem with empathy cause. I can log to other chat rooms but msn as soon as check the enable it appears a red window that said no network connection, but no is so fast that the system I think does not try to connect to msn server is like a lighting cause.
View 1 Replies
View Related
Sep 13, 2010
I am running 11.3 on a desktop and knetworkmanager used to startup upon login.However recently, knetworkmanager do NOT startup upon login. have to manually start the application from the menu.YaST / Network Devices / Network Settings / Global Options Tab is all the while set to "User Controlled With NetworkManager"I've even updated to KDE4.5 but the problem still persists.Any idea what can be done to get knetworkmanager to startup upon login?
View 9 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Jul 2, 2010
when I tried to install Nvidia driver for my computer, and when I reboot it, I found i can not log into the x-window mode as the screen display freeze at the point where suppose to be login screen. so use grub go to text mode, try to reinstall the akmod-nvidia xorg-x11-drv-nvidia-libs.i686, but it failed, sames i don't have internet connection to retrieve it. how can I start my network connection under text mode?
View 13 Replies
View Related
Mar 2, 2011
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
View 5 Replies
View Related
Apr 3, 2010
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies
View Related
Jan 29, 2011
I have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.
I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?
View 4 Replies
View Related
Oct 12, 2009
I am losing network bandwidth and I am quite frankly I am not sure why, I don't have allot memory 495.6Mib
But I clean my PC every few days "BleachBit"
I have read some where on the magazine Network receiving suppose to be higher. so how can I fix this issue please i am having allot problems, u use cable from Comcast
I am not quite sure what Information you might need from me to give.
I use Ubuntu 8.04 LTS
View 1 Replies
View Related
Feb 9, 2010
I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
View 5 Replies
View Related
May 14, 2010
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies
View Related
Sep 7, 2010
just i installed ubantu linux 10.4 lts , how can i connect this system to internet? I have BSNL broadband (DSL modem conn to ethernet port) modal quidway wa1003a
View 2 Replies
View Related
Oct 31, 2010
I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
View 4 Replies
View Related
Mar 23, 2009
I have D-Link GLB502-T ADSL router with MTNL TriBand connection.I am currently using Fedora 10. I have successfully setup the ADSL router in bridge mode, and can connect to net using network-manager.
Now I need to know how to start this connection using command-line. I intend to schedule auto restart of the connection for my night unlimited connection.
View 2 Replies
View Related
Jan 5, 2010
This is not exactly Ubuntu question but i don't know where else to ask. I'm trying to setup a Wireless Linux router. My ISP provides multicast IPTV. I've got the whole thing setup'ed with igmpproxy and hostpad. On wired connection IPTV works flawlessly, but on wireless connection IPTV glitches badly and router start to time out. My wireless card is DWA-552 I'm using ath9k driver. More info in my post on LinuxQuestions.org Did anyone tried to setup Wireless Router with IPTV?
View 3 Replies
View Related
May 26, 2010
When I try to connect to cvs server this is the error message I get.
I also tried cvs -d server:newuser@localhost:/cvs/CVSROOT login but getting the same result
My repository is in /cvs/CVSROOT
I also tried changing /etc/xinetd.d/cvs with different options, current it looks like this:
And my /etc/xinetd.conf is
cvspserver stream tcp nowait root /cvs cvs --allow-newuser=/cvs/CVSROOT pserver
defaults
# The next two items are intended to be a quick access place to temporarily enable or disable services.
#
# enabled =
# disabled =
View 5 Replies
View Related
Feb 17, 2010
I have Ubuntu 9.10 installed. Been using it no problem for months. I have a Belkin wireless USB. Worked fine. Until 8 days ago. Just stopped working. During troubleshooting I also discovered that the wired connection also does not work. Rebooted, checked settings, did all that. Nothing. I've plugged the network wire into another machine. It picked up IP via DHCP within seconds proving that it's not the network. I've tried everything that I can think of. What would cause the network within Ubuntu to just stop working? Wired and wireless. The only thing I can think of doing now is to reinstall Ubuntu.
View 6 Replies
View Related
Jan 18, 2010
I installed Ubuntu 9.10 using the default setup (Gnome I think) and on my Gateway Notebook using a wireless connection. It appears to be working great and I can even see my Windows drives and network storage on my home office systems.I have also set it up to run my favorite Bible software on Windows running under VirtualBox. I then installed the KDE Desktop so that I can select either desktop when logging on.
However, once I am in the KDE desktop, I cannot connect to the internet. I have checked and double-checked and the wireless settings seem to be the same on both the Gnom and KDE Desktops but still no network or internet connection when using KDE. I might mention that I am using the 64 Bit version of Ubuntu.
View 2 Replies
View Related
Jan 31, 2010
I am new to Ubuntu, and I have just installed version 9.10 on my desktop PC. I need to connect my computer to my home network. Right now, I have no connection and cannot detect any of the hardware when running Ubuntu. When I switch over to my Windows XP partition, everything works fine.
View 8 Replies
View Related
Mar 5, 2010
Hi - I am new to Linux and Ubuntu so I have no idea how to fix or problem solve unfortunately I installed Ubuntu 9.10 from scratch recently on this laptop and all was good. I connected to my WIFI network no problem. It's WPA PSK encrypted, DHCP enabled. I just set it up in Network Manager and it was all fine. Then after a few days I installed a printer and some packages and updates via synaptics. The network connection started dropping after 20 mins or so. Only a reboot would restore it - auto connects at first, runs fine till it drops then never will reconnect. I posted on here, someone gave me some lines to put in a config file. I tried that. I didn't seem to help much, problem remained. Yesterday I checked for updates and there were a whole bunch so I just installed them all. Now I cannot connect at all. I have deleted and recreated the connection in Network Manager but it doesn't help. It tries to establish a connection but never achieves it. I am connecting to the internet now on the same laptop booted into Windows, so all the hardware is fine.
Can anyone who knows about ubuntu networking help? Do I need to do a complete reinstall? Seems a bit much, but it worked when I initially installed the OS. I want to like Ubuntu, but something as basic as connecting to the internet is pretty vital so reluctantly having to start using Windows again...
View 9 Replies
View Related
May 1, 2010
I bought a pc with ubuntu 9.10 pre-installed today. Unfortunately there's a problem with the network connection, i.e. I don't have any. The mb is a Foxconn A74ML series with onboard LAN. I've switched cables with another PC and it didn't have any effect. The other PC is still connected to the internet and the new one is still not connected. How I can/should do to get a connection?
View 5 Replies
View Related
May 18, 2010
I'm a complete beginner who just installed 10.04. I'm trying to follow guides to setup my internet connection, but I am completely unable to locate the Network Manager Icon. I have the notification area already, but there is no icon. I tried the instructions here
After inputting
nm-applet --sm-disable
It gave me:
** (nm-applet:1722): WARNING **: <WARN> constructor(): Couldn't initialize the D-Bus manager.
View 1 Replies
View Related
May 27, 2010
I cannot seem to stop my computer from broadcasting an ad-hoc connection. I set it up using networkmanager, but now I cannot delete it. I searched Google and ubuntuforums for an answer, but no luck
View 9 Replies
View Related
Jul 20, 2010
I just got my first laptop, an ASUS eee pc 1201n. It came with Windows 7, but i decided to load the latest version of Ubuntu Netbook Edition on it as well.Today when I tried to access the internet via my library's free wireless service I couldn't get Ubuntu to recognize any wireless connections. I checked with Windows 7 and several networks appeared, including my libraries, but Ubuntu was blank.
View 1 Replies
View Related
Aug 10, 2010
How ubuntu 9.10 netbook is36 activate its network connection?
View 4 Replies
View Related
Nov 10, 2010
Wondering if anyone can point me in the right direction to setup some form of network connection monitoring and logging?As Australia has CRAP broadband and ISP's utilize Peak & Off-Peak download limits I schedule downloads for my Off-Peak times. Well recently my connection drops out exactly when my off-peak time kicks in and requires my modem to be reset to re-establish my connection.
My ISP is denying they are doing this but I happens everyday now and is getting really frustrating. What I want to try and set up is some sort of monitoring to ping my ISP's default gateway so I can prove it drops at a specific time each day. I am sure there would be something I could configure in Ubuntu but I am a newbie to Ubuntu so don't really know how to achieve this.
View 2 Replies
View Related
Nov 19, 2010
connect to wired LAN in ubuntu 10.04? I think I have specified the IP address and everything correctly. But it says no connectivity. In windows it says connected but I am unable to open any webpage.
View 2 Replies
View Related
Jul 28, 2011
I installed Jolicloud OS with Windows XP before because Windows XP have too many virus to attachment to Internet so whenever I go on the internet, most of the link take us to random site so I just installed Jolicloud OS however, some reason, I don't like Jolicloud very much because it require to enter the user name and password to link Jolicloud so wasted my time to use it... Its cool but pointless.
So, I just realised Ubuntu also provided free Ubuntu OS for netbook. After I downloaded Ubuntu desktop 11.04 and installed the system (all the datas is now gone and only current OS is Ubuntu)So, once I installed it... The netbook seem running well and no problem however, there is a huge problem is wireless are not found so I can't even use the Internet!.This netbook only got wireless and nothing else to connect like cable (wired).
View 8 Replies
View Related
