I am new to Ubuntu, and I have just installed version 9.10 on my desktop PC. I need to connect my computer to my home network. Right now, I have no connection and cannot detect any of the hardware when running Ubuntu. When I switch over to my Windows XP partition, everything works fine.
View 8 RepliesI'm using Internet connection through local network, receiving white (global) IP, route, DNS with local DHCP server. Lately I noticed that my Ubuntu gets ipv6 autoconfiguration from ISP router, receiving global ipv6 address and automatically adding ipv6 route. I can access Internet resources using ipv6 connection:
I can ping inet resources using my ipv6 global address and access, for example, ipv6.google.com or URL..
How can I share ipv6 connection to my home network? Using ipv4 it's easy, I just can use NAT for this. But if I understand correctly, in ipv6 there isn't such thing as NAT, because there is no limit in ip addresses.
I have tried to mount an HP laser printer on my home network through a VPN IPSES connection from my laptop, but I cannot manage to see the printer or make it accept commands.
View 1 Replies View RelatedI need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies View RelatedI have a problem: when I log in with my account NetworkManager doesn't connect to my home WiFi connection, cause it wait for authorization. No change if I try to retype the connection password, it still wait for authorization!
View 9 Replies View RelatedI've just installed openSUSE 11.3 for the first time on a Dell E1505 notebook and am having problems connecting to my home wireless network. Using the Network Manager I've been able to find my home network and connect after entering the network password. After a minute or two the wireless network is still shown as active but their is no connection (websites will not load).
I'm completely new to Linux so I have almost no clue what could be causing this. I have tried connecting the notebook hardwired (Ethernet) to the router and get a perfect connection if that information helps any.
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
Currently my office use a Cisco Firewall which will only allow the ANYCONNECT utility to do the vpn connection. I found a Linux utility (OpenConnect) which will do the same thing, but allow me more flexibility with my networking needs.What I ultimately would like to have is to have a switch that I can connect any network device into it and be connected to the office. IE (my IP Work Phone and Computer) Currently I have is a computer with fedora 13 and two network cards eth0 (home network - connected to a router) and eth1 which I would like to connect a switch to. OpenConnect communicates fine and I can see the work network from the Fedora machine. It creates a vpn0 tun/tap device and I don't know how to pass communication to/from the eth1 device.
Do I try to iptables the ports for the phone and services I need on the computer? Or do I build bridge; and If I do what am I bridging. I have tried making a bridge from eth1 to vpn0 which reply's with unsupported device or something like that.Unfortunately my network skills are bit limited and my office says "it can't be done". Their solution is for me to buy a ASA5505 (or something device) and have a static IP. I would have to make it work as my router and even then it will only DHCP 10 ip addresses; which will cause a shortage of IP addresses in the house.
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
I have a netgear wireless system and it is problematic with Linux. I need to use a static IP or will loose connection. It is also problematic with an itouch and a kindle. I just bought my wife a kindle and need to get it to work. It there a way to run two home wireless systems from one Internet connection? I have a wireless router supplied by surewest but my wireless Cannon printer did not seem to like that.
View 1 Replies View RelatedJust changed ISP, BT home hub 2.0 installed this morning.
From this Windows PC, wifi and wired connections OK.
From FC13, wired, I've set up DHCP and ifconfig shows the IP as in range (192.168.1.64)
Ping fails when I try to ping the router? No access from FF either.
I'm stuck thinking of what could be blocking it?
Firewall has http https as trusted services.
Not sure about trusted interfaces and masquerading? Should my eth0 be enabled for either of these?
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedI installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View RelatedI have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.
I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?
I am losing network bandwidth and I am quite frankly I am not sure why, I don't have allot memory 495.6Mib
But I clean my PC every few days "BleachBit"
I have read some where on the magazine Network receiving suppose to be higher. so how can I fix this issue please i am having allot problems, u use cable from Comcast
I am not quite sure what Information you might need from me to give.
I use Ubuntu 8.04 LTS
I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedI have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
As a user who is comfortable setting up a peer to peer network in Windows, how do I set up a simple peer to peer network with shares, on a standard network infrastructure (ethernet and basic dlink router), using Linux? I have two computers with Ubuntu 10.04, and would like to share files between them.Do I need to set static IP's? Why is only Windows network showing in Places/Networks?
Question two: I have 3 Windows computers (2 = XP, 1 = Win7) on my network, all with shares. When I try to access the windows shares from an Ubuntu machine, I can connect to some shares on some computers without being asked for credentials, however on other shares I am asked for credentials, but the credentials aren't accepted.I am assuming that domain = workgroup, so I enter in the workgroup name, but the dialogue refuses to let me in.
I'm having some difficulties setting up my ubuntu home server. I have vsftpd installed on my server, and I am able to use it perfectly when I am outside of my home. However, whenever I attempt to access my server through FTP from my desktop, it does not work. The file in question will load VERY SLOWLY to about 8% then the connection will drop out.My desktop and server are connected to the same router, and I feel as though this may be the issue.or vsftpd in a special way to access it through LAN?What I am trying to do specifically is use Comicpress (a Wordpress plugin) to upload comics to my server, with no luck.
View 1 Replies View Relatedwhat's the command to check who is currently on my home network?
View 5 Replies View RelatedI have 4 computers at home: 1 XP, 1 Laptop w/ Win7, 1 Mac, and 1 Ubuntu (hey, I like to try most everything). Anyway, I'm wanting to set up a home server to save everything on so that I don't have 3-4 copies of one file floating around. I was planning on using Ubuntu because I've always heard that Linux is a good system for a server and that Ubuntu is one of the easiest to work with.
Anyway, I just installed the Ubuntu OS, and the only software that I installed with it was Samba (I don't have a printer hooked up to this computer). Is samba the best software to use for this, or is there any other option that would be easier to use? I've heard that with samba there are a lot of things you have to change using the CLI (something about chmod, whatever that is, and others like it), which doesn't bother me, I've used CLI since the years before Windows, good ol' DOS.
I am looking to set up a home network server on an old PC. I want to be able to access files on the network hard drive in the PC, stream video or music from the "server", and use the computer as a regular desktop connected to TV as a monitor. I tried setting up an FTP server and that worked for transferring files but failed to get a good connection for streaming or fast transfers.
Was less then 1MB a second. I tried setting up a shared folder but ran into several permission errors between the host PC and the laptop that that connected to the shared folder. which way to go with this to get what I want out of it. I know if can be done just not sure how to do it.
Just installed 10.04 LTS beta on 3 computers in home. At first, two of them showed up under the network window using places. The third never did and would not find the shared printer. After all rebooted, none show up. All three can access the internet and can display a valid internal network ip address using ifconfig.
View 1 Replies View RelatedI recently installed Xubuntu 10.04 on my desktop computer that had a USB wireless adapter DLink DWA-140. I didn't have to install any additional drivers to get it to work. I put in the network SSID and the password and was connected immediately. However, when I try starting firefox it doesn't load any sites. Can anyone help me in approaching this problem. I have a DLink DIR-655 router. If I should gather more information to get this problem solved then please let me know and I will do so.
Edit: Now I am unable to connect to the network. When I click the network icon in the taskbar, my home network is not visible while it is visible under another ubuntu computer I'm running.
I have a beefy Win Box desktop that i'm using as a media server and i have a home network setup already using windows xp. I had everything running fine and the PC connects flawlessly to my Bravia TV and both my ps3's so i know the network and sharing settings are setup just fine. Anyways i got tired of all the Windows 7 BS and decided i would once again use Ubuntu on my Toshiba netbook. So the question is how in the heck do i get my Ubuntu netbook to connect to the Desktop? I've tried browsing the fourms but either i'm missing something of just a little slow. What "extensions" would i need to get and how would i go about implementing it from there?
View 3 Replies View RelatedFor the first time networking my home computers I'm not interested in getting Ubuntu boxes to to talk to Windows and we now have Ubuntu on all machines.
I'm trying to use the "Personal Files Sharing Preferences" but there is a message telling me I require some packages. Most unlike Ubuntu but it doesn't tell me what packages I do need.
Uploaded with ImageShack.us
What I would really like to do is have access to sertain directory's on other computers and have full access to read/write within the home directory.
I installed Ubuntu 10.04 32-bit on an old desktop (1.5ghz Pentium 4, 20GB hard drive, 768MB RAM) a week or two ago, at the same time that I installed Xubuntu 10.04 on an even lower performance IBM tower server. The server functions perfectly and my other (Windows XP) desktop recognized it from the start, as did the Ubuntu desktop. However, I rearranged a few ethernet cables the other day without turning off the desktops and ever since my Ubuntu machine does not recognize my server, even though all of the devices are connected via ethernet cable to a linksys router and it connects to the internet without a problem. I'm a linux newbie - this is my first move away from Windows - and I don't know where to turn. Far more confusing is the fact that, when I boot from a LiveCD, the network is recognized and I can read/manipulate files on my server without a problem. Oh, and I briefly flirted with OpenSUSE KDE (not as noob-friendly as Ubuntu, so I'm back) and encountered the same problem.
Needless to say, booting from the hard drive is preferable to booting from CD every time
I have an Acer Aspire One -532h and i just installed ubuntu 10. I am trying to crack my own Wep network at home with Aircrack-ng. So after i installed Ubuntu and installed everything in "updatemanager", i installed Aircrack,Macchanger. And as i look in "iwconfig" and ifconfig i see the Atheros driver Ath9k and Wlan0. Now my 1st question. Do i have to install madwifi or such for the aircrack to inject?
2:nd I have tried to install madwifi also but when aireplay-ng want to inject ,the whole computer freezes. How do i fix this?....have looked aound google and found that many have the same trouble...