Ubuntu Networking :: NoIP Domain Setup For SSH Access

Feb 23, 2010

I've recently installed noip2 which installed fine. Except when I try connect to my noip domain it sends me to my router login page and won't let me access my ubuntu box. How can I set my noip domain so when I connect, it will allow me to access SSH, sabnzbd, etc., instead of forwarding me to the router login page. I'm sensing that I may have to set the ubuntu box to a static ip and forward the various ports of SSH, sabnzbd, etc to it. Would this be correct?

View 3 Replies


ADVERTISEMENT

Fedora Networking :: Setup A Domain Name So Everyone In The LAN Can Access The Sites

Jan 15, 2010

I have a question which it believe it is quite simple but I have no clue how to do it... I'm using Fedora 12 and I'm the only Linux machine in my office's LAN... I have Apache (httpd) setup and my co-workers can access the sites perfectly by using my IP address, for example [URL]... So here's the question, how do I setup a domain name so everyone in the LAN can access the sites by typing [URL]..

View 6 Replies View Related

Ubuntu :: Networking / Setup A Domain And Directory Server Similar In Function To Windows Server W/ AD And Join Other Machines To The Domain

Aug 21, 2009

I've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.

View 3 Replies View Related

Ubuntu Networking :: NoIP Not Redirect IP After Host Added In EHCP?

Apr 10, 2010

I have a dell desktop PC that runs with ubuntu 9.04 jaunty jackalope and has 2 network cards eth0 that is connected to internet with an pppoe connection and is shared on eth1 for the other pc that is with windows on the ubuntu server machine is installed EHCP controls panel and No-IP, No-IP works fine but if I add a host as a domain in EHCP where I want to add EHCP {itself, problem appears. No-IP does not redirect to my IP after I added host in EHCP. EHCP is set to have the original IP of my pppoe and I tried with the 127.0.0.1 IP and the problem is still there.

View 2 Replies View Related

Ubuntu Servers :: Unable To Setup The Domain - How To Use Two Domain Names

Feb 16, 2011

i have registered two domain names that i want to use to connect to my ubuntu server. I was wondering how to do this i was looking at bind9 but that didn't work that great. The server is behind a router with firewall i can connect to it using the external IP address but i like to use the two domain names if that is possible.

View 3 Replies View Related

Ubuntu Servers :: Active Directory Domain Integration - Allow Domain Users To Authenticate Server And Access File Shares Using Samba

May 13, 2010

The company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:

[Code].....

View 9 Replies View Related

Ubuntu Servers :: Setup New Remote Office - Setup Domain Trust Between Two Sites?

Mar 14, 2010

I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.

View 5 Replies View Related

Ubuntu Networking :: Window Domain Joined - Map Drive Access?

May 10, 2011

I already join the domain but I have the map drive is based on the user name in windows server 2003. I map the drive on the user by batch file like map_file.bat and its on the group policy as log in scripts. So how can the user when he use PC1 see his own map drives and when he go to PC2 he see the same map drives and when other user sit on his computer will see other map drives. Its already working on Winxp as client but I want it to be the same on ubuntu.

In other word, more description Mike using PC1 can see map drive MAPDrive1 and MAPDrive2 and when Mike want to use PC2 and automatically can see MAPDrive1 and MAPDrive2 or any other PC he use .. he can see the same MAP1 and MAP2 ins same time jack if he use PC1 can see map drive MAPDrive3 and MAPDrive4 and when jack use PC2 he again can see MAPDrive3 and MAPDrive4.

View 2 Replies View Related

Ubuntu Servers :: Access Web Site When Site's Domain Name / User's Local Server's Domain Name Are Same

Feb 18, 2010

In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?

View 1 Replies View Related

CentOS 5 Networking :: Filter Access Server Through The Net Only To Authenticated Users From Domain Controller (Win2k)?

Jul 17, 2009

Filter access server through the net only to authenticated users from domain controller (Win2k). Server (Centos)(Firewall with 2 nic), which makes access to the net, with only 196MB RAM (PIII500Mhz), so I do not want a solution based on proxy or what resources it uses large I want a solution with a script that runs at login on windows this check series HDD and to communicate with Linux server that's open accessor another simple solutionNow just use only MAC filtering on

View 1 Replies View Related

Ubuntu Networking :: No Internet Access Via New Wireless Setup?

Feb 10, 2010

Running Ubuntu 9.10 Ive just got my wireless connection working after first having got the wired eth0 connection working.

With the wired connection I could SSH into my server through my firewall/router (via a forward). I can run up VNC, from there firefox, browse the web - all is well.

I have now setup the wireless connection, using a static IP, and I can likewise SSH into my server. I can run up VNC. I can ping my router. I can log onto it via VNC. I can browse to my router. But I cant browse the internet.

But I cant ping google.com. The reason is there is no host lookup service. Nslookup eventually says no servers could be reached.

So specifically, if I ping www.google.com Im told "unknown host". If I do an NSlookup on it I get timeout, no servers could be reached. However if I ping 66.102.11.104 I get responses.

I see no relevant entries in my firewall log.

Unfortunately I cant traceroute because the package isnt found - and of course I cant install it because I have no internet !

Strangely (to me at least !) if I then tunnel through SSH and browse the web, I have no problems. It works ? I know I am browsing through my SSH tunnel because whatsmyip gives the IP of my router at home, not where Ive SSHd in from. I can surf just fine.

why I cant do host lookups any more (and this did work with my wired connection, but whether its related to my change to wireless, or static IPs or both I cant be sure - it certainly appeared to happen at the same time). And, more to the point, what I need to look for/do to rectify it ?

As a bonus Id be interested in why I can SSH and browse via tunnelling but not direct from my server (via VNC). Just for interests sake !

if config reports :

wlan0 Link encap:Ethernet HWaddr 00:90:4b:27:ae:17
inet addr:192.168.1.69 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::290:4bff:fe27:ae17/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[Code]....

View 1 Replies View Related

Ubuntu Networking :: Setup User With No Internet Access?

Nov 17, 2010

I would like to set up a user account with no network access. Reason is that sometimes my little daughter plays with the computer (for example watching movies on dvd's) and I want to prevent internet access in case she plays unattended. Is there a simple way to do that? I am using ubuntu 10.04.

View 4 Replies View Related

Ubuntu Networking :: OpenVPN / Adito Setup - Extranet Access

Feb 25, 2010

Alright, I've been trying to get this fixed on my own, but I think I am missing a fundamental principle and no amount of scripts or hacks is gonna take place of that. I have adito/OpenVPN installed on my media center. It runs fine and I can access adito in my internal network from other computers just fine. But, the whole point is I want to be able to access it remotely!

Now, I had previously made a run at an external FTP site and failed miserably at that, and I think its all coming down to me not knowing how to configure my own router. I have a Netgear router, I can log into it and under Router status I can get what looks to be my routers external IP address. But if I try to access it at https://XXX.XXX.XXX.XXX:4433 (didn't want to use the default port, 443) I get nothing.

So, my main problems as I understand them are:
1)I need to clear the firewall on my router to allow traffic in/out of my reserved port
2)I need to forward incoming requests on that port to the static internal IP of my media center
3)I really would like a more reliable way to verify the info im getting from my routers admin settings page is actually my external IP, is there a command for this or a website that will tell me?

View 2 Replies View Related

Ubuntu Networking :: Setup Samba On 10.10 (Free / Restricted Access)

Nov 19, 2010

I want to setup samba on Maverick. This is the case. I have 2 folders want to be shared, freeaccess and restrictedaccess. The freeaccess folder can be accessed by everyone on network. The restritedaccess folder can only be accessed with account named someone. What I want to ask is, how to setup samba that can solve that case...??

View 9 Replies View Related

Ubuntu Networking :: Setup Server As A Wireless Access Point?

Apr 2, 2011

I'm trying to setup my ubuntu server as an access point but am running into some issues.

The server has an Atheros wireless card (AR5008 chipset) and I have used the following link to set it up in master mode using madwifi drivers: [URL]

I then used this link to set it upas an access point using hostapd. [URL]

But inspite of following the above steps, other wireless clients in my LAN are unable to see the ssid "Linuxmaster"

Although iwconfig shows that the card is in master mode.

iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wifi0 no wireless extensions.
ath0 IEEE 802.11g ESSID:"Linuxmaster"

[Code].....

View 1 Replies View Related

Ubuntu Networking :: Can Connect And Surf The Web/internet But Cannot Access The Setup Page

Nov 8, 2010

I have Dlink Wireless G Access Point.

I can connect to my access point to surf internet. I setup my Dlink access point (password, network name, etc) in Vista by visiting "http://dlinkap/" in my web browser.

In ubuntu, I can connect and surf the web/internet but i cannot access the setup page.

When I try to type the "http://dlinkap/" to my browser then the browser will redirect it to google search.

I try 192.168.1.1, I can access my linksys router. but my dlink access point, i cannot access the setup page.

View 8 Replies View Related

Networking :: Setup 2 NICs With Access To Internet With 1 Gateway

Sep 13, 2009

I have 1 root-server with 2 NICs, both having their own internet IP addresses:

Code: eth0 = 8x.x.x.183
eth2 = 8x.x.x.205 We only have one gateway on that network:
Code: gateway = 8x.x.x.1 We want to use eth2 for postfix + http, and eth0 for all the other stuff.

How can this be setup ? With route / ip route / iptables ?

View 1 Replies View Related

Networking :: Setup VMware's Network Configuration For Red Hat Can Access Internet?

Apr 7, 2010

I installed and tested both Windows server 2003 and Red Hat 9.0 with vmware workstation7. After installing 2003 can access internet but Red Hat can't. I want to test squid proxy server, send mail server, webserver etc. So, I would like to know how to setup WMware's network configuration for Red hat can access internet.

Below link is the configuration of VMware network setup both Server 2003 and Red Hat.

Here is Red Hat Configuration:
http://i64.servimg.com/u/f64/11/74/16/17/linux10.jpg

Here is Windows Server 2003 configuration:
[url]

I am using wireless connection to access internet.

View 1 Replies View Related

Ubuntu :: How To Setup Domain Server

Apr 22, 2011

I would like to manage more than 200 ubuntu PC's. So i have a plan to setup a domain server. explain me on setting up a ubuntu domain server?

View 1 Replies View Related

CentOS 5 Networking :: Belkin As Wireless Access Point With Existing Setup?

Jul 2, 2011

I have a Centos 5.6 Linux Server configured as Router with NAT for my LAN. There are currently 2 NIC's on my server. One is connected to WAN , a PPOE connection (eth0) and eth1 is connected to a switch which supports my LAN. I have enabled NAT and configured iptables on my server and I am able to access internet from LAN and everything is working fine.I have a Belkin F5D8233-4v3 Wireless router and I need to configure wireless on my network so that I can access internet from my Laptop. The issue is that I have only 2 NIC's on my server, one Gigabit NIC integrated with my motherboard and another NIC which I am currently using for WAN access and LAN. I need to setup the Belkin as an wireless Access Point.

Can I connect my Belkin to my switch and set it up as a Wireless Access Point?? I have read about setup using 3 Nic's.Any ideas on how to configure my Belkin as Wireless Access Point with my existing setup? Is Belkin F5D8233-4v3 supported on Linux.

View 1 Replies View Related

Ubuntu :: Setup A Local Domain For The Site?

Nov 12, 2010

I am starting to develop websites in Ubuntu. I have set up apache server, php, mysql, and phpmyadmin. I have also set up a local domain for the site. Everything works great with html files, but how do I get Firefox to open .php files instead of trying to save them.

View 2 Replies View Related

General :: Setup Domain For Vps?

Mar 17, 2011

I have a vps on debian linux OS. And I have a IR domain (The national domain of iran) registered on IRNIC registrar. It shows me some textboxes to enter name servers. The textboxes are in below order:

TextBox1 TextBox2
TextBox3 TextBox4
TextBox5 TextBox6
TextBox7 TextBox8

And I don't know what I have to do.

View 1 Replies View Related

General :: Setup Mails To Go Only For Particular Domain?

Aug 27, 2010

I want to set up mails from server22 should only go to [URL] but should not go to others [ like yahoo,hotmail, gmail etc ] Seached the threads, but no luck.

View 2 Replies View Related

Ubuntu Servers :: CO.CC Free - Setup An Email Server For Domain

Apr 6, 2010

I have regged a Domain on CO.CC

Is it possible to setup an email server for that Domain on my Ubuntu box?

like: user@domain.co.cc

All for free?

View 1 Replies View Related

Ubuntu :: Fetchmail Setup - Authorization Failure On User Domain

Oct 24, 2010

I have setup the fetchmail as below:
Code:
poll domain.com
proto pop3
via domain.com
user "user@domain.com"
pass "123456789"
is user@domain.com
keep
no fetchall

When I try to login it gives the following message:
Code:
fetchmail: 6.3.8 querying domain.com (protocol POP3) at Sun 24 Oct 2010 10:51:52 AM EEST: poll started
Trying to connect to domain.com/110...connected .....
fetchmail: domain.com: upgrade to TLS succeeded.
fetchmail: POP3> USER user@domain.com
fetchmail: POP3< +OK
fetchmail: POP3> PASS *
fetchmail: POP3< -ERR Authentication failed.
fetchmail: Authentication failed.
fetchmail: Authorization failure on user@domain.com@domain.com
fetchmail: POP3> QUIT
fetchmail: POP3< +OK Logging out

Although I'm able to login to the webmail of my domain.com cpanel with the same username and password, please note also that it some time working smoothly and most time it gives login authentication failure:

View 3 Replies View Related

OpenSUSE Install :: How To Setup Multi Domain In 11.2

Jan 25, 2010

Anyone know how to configure multi domain in openSUSE 11.2?

View 9 Replies View Related

General :: Setup Linux DNS For Windows Domain?

Feb 18, 2011

I have a SBS '08 server, and it handles all FSMO roles, and every service known to man. I'm trying to shift those to other computers, but we haven't got the capital for another server. I know Linux is a capable OS and has the ability to run DNS, but I'm not too familiar with linux. How could I set up DNS on linux so that it is a redundant DNS server?

View 2 Replies View Related

Server :: Setup An Mail Filter For Domain?

Aug 11, 2010

I'm trying to set up an mail filter for our domain. At the moment we're using ClearOS as the filter, works OK but I still get something through and the blacklist and whitelist doesn't seem to work. I was hoping to set up a mail filter on my own, using Spamassassin and/or something else. It seems I have to buy subscription at ClearOS to make it update better or something. I might just do that, it's just tempting to find a way to do it on "my own". I tried to follow these instructions but I don't seem to go anywhere... ...I began with setting up the base server as it is shown there. I've setup quite a few Linux servers, mainly as firewall/gateway kind of things but also some DNS servers, web servers and so on.

I have one mail server and the mail filter is supposed to be on the outside to filter mail before it hits the mail server.

View 3 Replies View Related

Server :: Setup Sendmail To Work With Domain

Apr 28, 2010

I'm Trying to setup Sendmail to work with my domain in my server which is :

Code: Linux Centos 5.4 My server can send mail locally to users in my Linux Box and it can receive mails from yahoo and other mail providers in the web, but when i try to send mails to yahoo or others it send me some mail delivery message which is :

[Code]...

View 8 Replies View Related

Server :: Bind9 - Setup To Get IP Address To Redirect To Domain

Oct 31, 2010

Location and syntax of named.conf in Ubuntu's version of BIND 9. I already have an HTTP server (in the form of Apache) along with forum software set up on my Acer netbook. However, the only way I can access the forum software is if I type in my IP address. How do I set up my named.conf to get the IP address to redirect to a domain? I already have my resolv.conf configured to allocate a domain to the IP address, but testing the ping of the site returns a "No such domain" error.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved