Since upgrading to 10.04 my network connection asks for key/password every time I logon. Where/how can I make ubuntu remember my key/password?
View 2 RepliesIn the right upper corner of your screen,you can see if you have a network connection or not.Most of the time I do not have one according to Networkmanager (?).So I have to enable my wired connection manually.I already tried a lot to change my settings so I would have a network connection at boot,but it doesn't seem to work....Firefox is in Offline modus when I logon..
View 2 Replies View RelatedI use Fedora 14 KDE spin, and I have a wireless network with 4 users. When I start my PC I have to enter the administrator password for the KDE wallet, and also the wireless password if I want to connect to the Internet. This is no problem for me, but I prefer not to share those passwords with the other 3 users. I selected the "Connect automatically" option in the wireless connection settings, but it still asks me for the password every time.
View 1 Replies View RelatedI've spent AGES getting ndiswrapper to work on FC11 with my USR 5416 card.
Now it's finally working and Networkmanager can see my local wireless network. Problem is when I try to connect and it asks for the wep key, the encryption I'm using is not an option.
My network uses a 64 bit ASCII passphrase. My options when connecting are:
None of these seem to be right for my network and, consequently, none of them work.
When I have video running and the video stops, I see that the connection is destroyed in about 5 seconds, which is what I want. If, rather than stopping the video, I pull the plug, I have seen it take 350 and 380 seconds before the connection is destroyed. Why is there such a large difference in the time to destroy a video connection between stopping the video and pulling the plug on it when using net filter connection tracking? How can I shorten the time for the connection to get destroyed when pulling the plug?
View 3 Replies View RelatedI have Chromium on 11.04 and I can't set it to be default. If I go into preferences and select it, nothing happens. If I open Chromium, it asks every single time if I want it to be my default browser. Regardless of what I say, it asks me each time.
View 9 Replies View RelatedI need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies View RelatedI am having some trouble with my opensuse 11.3 internet connection for two weeks. After a certain period connection drops while using both NetworkManager and ifup. For info, I write the outputs of some codes.
[Code]...
My question might sound pretty nooby - still having my first Ubuntu cup after a Windose life Every time at logon i have to enter my wireless key - is there a way to save it so I dont have to enter it every time?
View 3 Replies View RelatedWhen I log onto my 10.04 server via ssh, there is the /etc/motd displayed. This motd is made up each time by the files in /etc/update/motd.d/. There is this one file : update-motd-reboot-required The content is exec /usr/lib/update-notifier/update-mot-reboot-required and the content of this one is : if the file /var/run/reboot-required exists, print it.
But who is making this file and why ?we know who it is: it's pam_motd.. but why would I reboot ??!?
editt2 : nvmd [URL]
I've config vsftpd chroot mode follow:
Code:
Code:
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
I'm using Filezilla to connect to a remote server with site 2 site VPN. Even when i'm sending a small file with SFTP, the connection time outs and reconnects. Its happening again and again. Even SCP connection is also the same. BUT SSH CONNECTION IS WORKING FINE.
Filezilla log
ravindika@ravindika:~$ tail -f filezilla.log
2010-07-07 10:35:12 2690 2 Response: fzSftp started
2010-07-07 10:35:12 2690 2 Command: open "root@XXX.XXX.XXX.XXX" 22
2010-07-07 10:35:19 2690 2 Command: Trust new Hostkey: Once
2010-07-07 10:35:21 2690 2 Command: Pass: *******
2010-07-07 10:35:25 2690 2 Status: Connected to XXX.XXX.XXX.XXX
[Code]...
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
I have a wireless connection with static ip 192.168.10.150 to connect to Internet through a modem / router ADSL ip Lan 192.168.10.1. I connect with no problems. I have a wired network in the office 172.16.17.0/24 to work with the servers. the router is 172.16.17.1, my connection eth0 with static ip 172.16.17.150 work, but Internet by Internet nothing. If i disconnect the cable i have Internet from wireless. ?? What i have to do to ,to received internet by wireless and be connected ate same time to my wired network by eth0 too.
all routers have DHCP active.
I am running Ubuntu 10.04 and i have some problems with my intel WiFi 5100AGN. After a randoom time i dont have a connection anymore and Ubuntu does not reconnect automattecly. I get an popup with the preinstalled password for my WiFi but for some reason i cant connect to it. I have a pastebin from the dmesg after it happens.: [URL]... It is tottaly randoom time it can happen in 1h and also in 6h.
View 2 Replies View RelatedI've been trying to use gnome-schedule to create a scheduled task that would dial my pppoe connection automatically. For this I used "sudo pon" command (after configuring the pppoe connection using pppoeconf ). Although the command gets executed, but then it waits for me to enter the password. I want it to be automatic & shouldn't require me/anyone to authorize it. Is there a way to enter this password automatically for the scheduled tasks?
Also, I'd like to use network manager, instead of pppoeconf, for the same purpose. How can I set network manager to dial a pppoe connection at scheduled time?
i use Huawei usb modem as default connection device , Why i have to connect and disconnect my usb many times to work properly? when i start my PC i have to connect and disconnect the usb about 5 or 6 times to get a connection to the Internet, the icon above shows that every time i get a successful connection but really i don't have it. i have to do it many times to get the connection actually established and the Internet truly works
View 2 Replies View RelatedI installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View RelatedI have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.
I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?
I am losing network bandwidth and I am quite frankly I am not sure why, I don't have allot memory 495.6Mib
But I clean my PC every few days "BleachBit"
I have read some where on the magazine Network receiving suppose to be higher. so how can I fix this issue please i am having allot problems, u use cable from Comcast
I am not quite sure what Information you might need from me to give.
I use Ubuntu 8.04 LTS
Our system is based on RH4 and is using pam_tally and faillog to record failed attempts and to lock users out after 5 attempts. We have a requirement to provide a normal (non-root) user logging onto our system, with information regarding the number of failed logon attempts made on their account before the current successful logon (similar to the functionality provided by HP Protect Tools on Windows). My first idea was to add 'faillog -u $USER' to the bashrc, however by the time the bashrc is run - the user has been successfully authenticated and the faillog has been reset back to zero.
View 5 Replies View Relatedhow to make dsl setup and to acess both wireless and wired at a time.
View 2 Replies View RelatedI could not find an answer to this. I can connect to the internet no problem after I edit the connection name to NETGEAR instead of our last name. After a while it looks like it renews the connection and created a new one with the wrong name. The connection drops. It looks to me it is not using the same wireless connection each time but creating new ones that do not work for the above mentioned reason. What can I do to stop the loop and have it use the same connection always?
View 5 Replies View RelatedI have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedThis is not exactly Ubuntu question but i don't know where else to ask. I'm trying to setup a Wireless Linux router. My ISP provides multicast IPTV. I've got the whole thing setup'ed with igmpproxy and hostpad. On wired connection IPTV works flawlessly, but on wireless connection IPTV glitches badly and router start to time out. My wireless card is DWA-552 I'm using ath9k driver. More info in my post on LinuxQuestions.org Did anyone tried to setup Wireless Router with IPTV?
View 3 Replies View RelatedI have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
I've been using wicd (1.6.2.1 was the latest version on my desktop computer, maybe it got updated) without any problems for a long time. This morning after switching the thing on to read the morning news with a nice hot cup of coffee I got a number of funny Gui system messages: Wicd needs to access your computer's network cards. Password
View 12 Replies View RelatedSince the upgrade from Lenny to Squeeze on my Notebook Toshiba Satellite Pro U200 with Intel Pro/Wireless 3945 ABG I have wireless connection problems.The connection breaks time to time and sometimes cannot connect automaticaly after restart. BTW I didn't change anything on the wireless or network configurations on the notebook and on the wiereless router.
View 8 Replies View Related