Ubuntu Networking :: SFTP Connection Time Out?
Jul 7, 2010
I'm using Filezilla to connect to a remote server with site 2 site VPN. Even when i'm sending a small file with SFTP, the connection time outs and reconnects. Its happening again and again. Even SCP connection is also the same. BUT SSH CONNECTION IS WORKING FINE.
Filezilla log
ravindika@ravindika:~$ tail -f filezilla.log
2010-07-07 10:35:12 2690 2 Response: fzSftp started
2010-07-07 10:35:12 2690 2 Command: open "root@XXX.XXX.XXX.XXX" 22
2010-07-07 10:35:19 2690 2 Command: Trust new Hostkey: Once
2010-07-07 10:35:21 2690 2 Command: Pass: *******
2010-07-07 10:35:25 2690 2 Status: Connected to XXX.XXX.XXX.XXX
[Code]...
View 1 Replies
ADVERTISEMENT
Jun 13, 2010
I'm trying to establish a connection between two laptops using sftp but am getting the following error message:
Connecting to <IP>...
ssh: connect to host <IP> port 22: Connection refused
Couldn't read packet: Connection reset by peer
ftp isn't working either. Both machines are running Ubuntu and connect to the internet through the same wifi router in case that's relevant. What could be the problem?
View 4 Replies
View Related
Oct 20, 2010
In the right upper corner of your screen,you can see if you have a network connection or not.Most of the time I do not have one according to Networkmanager (?).So I have to enable my wired connection manually.I already tried a lot to change my settings so I would have a network connection at boot,but it doesn't seem to work....Firefox is in Offline modus when I logon..
View 2 Replies
View Related
May 13, 2011
When I have video running and the video stops, I see that the connection is destroyed in about 5 seconds, which is what I want. If, rather than stopping the video, I pull the plug, I have seen it take 350 and 380 seconds before the connection is destroyed. Why is there such a large difference in the time to destroy a video connection between stopping the video and pulling the plug on it when using net filter connection tracking? How can I shorten the time for the connection to get destroyed when pulling the plug?
View 3 Replies
View Related
Apr 7, 2010
I have a wireless connection with static ip 192.168.10.150 to connect to Internet through a modem / router ADSL ip Lan 192.168.10.1. I connect with no problems. I have a wired network in the office 172.16.17.0/24 to work with the servers. the router is 172.16.17.1, my connection eth0 with static ip 172.16.17.150 work, but Internet by Internet nothing. If i disconnect the cable i have Internet from wireless. ?? What i have to do to ,to received internet by wireless and be connected ate same time to my wired network by eth0 too.
all routers have DHCP active.
View 2 Replies
View Related
Jun 4, 2010
I am running Ubuntu 10.04 and i have some problems with my intel WiFi 5100AGN. After a randoom time i dont have a connection anymore and Ubuntu does not reconnect automattecly. I get an popup with the preinstalled password for my WiFi but for some reason i cant connect to it. I have a pastebin from the dmesg after it happens.: [URL]... It is tottaly randoom time it can happen in 1h and also in 6h.
View 2 Replies
View Related
Mar 3, 2010
I am trying to use autoexpect and can't seem to get it working. I installed expect and expect-dev and have the autoexpect example files but when I try the % autoexpect command from the terminal all I get is;"bash: fg: %: no such job" - what do I need to do so I can get this to work? I am trying to create a script for an automated SFTP connection. I created a bash script that works okay but it gets stuck at the password prompt and I heard that autoexpect would be the best way around that
View 2 Replies
View Related
Jan 19, 2011
I'm running an SFPT server which my clients logon to using an FTP client. at the moment each client has a user name and password.
Thus far to improve security I've disabled root login but an looking for futrhrt ways to protect it from attack, having researched using google some of the security features suggested prevent the FPT clients from connecting.
Questions:
1- what further things can i do to secure my server that still allows it to be usable for FTP clients?
2- specifically is it possible to use non login pre-share key authentication?
How i set up the server is shown here: [url]
View 3 Replies
View Related
May 25, 2010
Since upgrading to 10.04 my network connection asks for key/password every time I logon. Where/how can I make ubuntu remember my key/password?
View 2 Replies
View Related
Jun 14, 2010
I've been trying to use gnome-schedule to create a scheduled task that would dial my pppoe connection automatically. For this I used "sudo pon" command (after configuring the pppoe connection using pppoeconf ). Although the command gets executed, but then it waits for me to enter the password. I want it to be automatic & shouldn't require me/anyone to authorize it. Is there a way to enter this password automatically for the scheduled tasks?
Also, I'd like to use network manager, instead of pppoeconf, for the same purpose. How can I set network manager to dial a pppoe connection at scheduled time?
View 1 Replies
View Related
Jun 20, 2010
i use Huawei usb modem as default connection device , Why i have to connect and disconnect my usb many times to work properly? when i start my PC i have to connect and disconnect the usb about 5 or 6 times to get a connection to the Internet, the icon above shows that every time i get a successful connection but really i don't have it. i have to do it many times to get the connection actually established and the Internet truly works
View 2 Replies
View Related
Dec 3, 2009
Is it possible to limit each user so that only one can connect via each username for ssh/sftp? I work with a small company where there aren't really enough of us to justify using a revision control system, but we don't want to accidentally step on each other's toes, so we'd like to try simply preventing more than one person from accessing a given domain at once.
View 15 Replies
View Related
Jun 4, 2015
I have changed my web server from FTP to SFTP for security reasons. I am used to Nautilus randomly crashing, but usually I got to connect fine via FTP. Now I could connect exactly once with SFTP, but ever since I only get the useful message:Oops! Something went wrong. Unhandled error message: SSH program unexpectedly exited
View 1 Replies
View Related
Mar 25, 2011
how I can do a ftp connection putting the user and passwd as default?
View 6 Replies
View Related
Jun 13, 2010
how to make dsl setup and to acess both wireless and wired at a time.
View 2 Replies
View Related
Apr 23, 2010
I could not find an answer to this. I can connect to the internet no problem after I edit the connection name to NETGEAR instead of our last name. After a while it looks like it renews the connection and created a new one with the wrong name. The connection drops. It looks to me it is not using the same wireless connection each time but creating new ones that do not work for the above mentioned reason. What can I do to stop the loop and have it use the same connection always?
View 5 Replies
View Related
Mar 25, 2011
How I can do a ftp connection putting the user and passwd, and I would do! Today, I need to know how can I do this, but in SFTP!
View 1 Replies
View Related
Jan 5, 2010
This is not exactly Ubuntu question but i don't know where else to ask. I'm trying to setup a Wireless Linux router. My ISP provides multicast IPTV. I've got the whole thing setup'ed with igmpproxy and hostpad. On wired connection IPTV works flawlessly, but on wireless connection IPTV glitches badly and router start to time out. My wireless card is DWA-552 I'm using ath9k driver. More info in my post on LinuxQuestions.org Did anyone tried to setup Wireless Router with IPTV?
View 3 Replies
View Related
Dec 20, 2009
I have FileZilla installed on this machine, and OpenSSH (with an open port 22) on another machine on my home network. When I try and connect, I get: Quote: Status:Connecting to 192.168.2.3... Response:fzSftp started Command: open "alphatwo@192.168.2.3" 22 Error:Connection refused Error:Could not connect to server
Which has left me puzzled as I have an open port. Does the username have to be defined somewhere? E.g. the machine acting as my SFTP server can be logged on to locally as alphatwo so that's what I logged in as (with the correct password). Is this correct? If so, does anyone have any ideas as to how I might rectify it? I want SFTP set up so I can copy PHP files from my laptop to /var/www/html/ on another PC (across the home network).
View 4 Replies
View Related
Apr 22, 2010
Since the upgrade from Lenny to Squeeze on my Notebook Toshiba Satellite Pro U200 with Intel Pro/Wireless 3945 ABG I have wireless connection problems.The connection breaks time to time and sometimes cannot connect automaticaly after restart. BTW I didn't change anything on the wireless or network configurations on the notebook and on the wiereless router.
View 8 Replies
View Related
Apr 13, 2011
i have a vsftpd server running well but i want to make/force all users to use sftp and not just ftp is this possible?
View 1 Replies
View Related
Aug 6, 2011
I have configured rssh 2.3 with openssh 5.8 on RHEL 5.6 64 bit to restrict the users to scp and sftp. When i try to sftp or scp it gives error connection closed. After long googling tried different solutions like add missing libraries, setuid to rssh_helper. I had full copy of /lib to /chroot/lib and /chroot/lib64 but no success. conf and log files are below for reference.
[Code]...
View 1 Replies
View Related
Dec 1, 2009
I can ssh to my Fedora 12 without any problem, but every time I sftp to it, it says "Connection closed" and then just kick me out. Is there any configuration I missed here?
I found the issue is that in .bashrc I have following line: bind '"C-a": "cd .. "' As soon as I comment it out, sftp start working. But I cannot explain it.
View 3 Replies
View Related
May 31, 2010
Weird problem; I have set up SSH on my 10.04 server. I can putty to it over my LAN from my Win 7 box but when I try to SFTP I get "connection timed out".
View 2 Replies
View Related
Mar 26, 2010
I have been provided with a PPK file to connect to a remote server using SFTP. I've also been given a username and password. I created a user test and created a .ssh directory in their home directory. I've put the ppk file in here and renamed it id_rsa (though I'm pretty sure I'm not correct in doing so)
When I SFTP using sftp test@remoteserver.com I get prompted for the key password - which I don't know and am presuming is blank, so I just hit enter Then is prompts me for the user password which I give it. it falls down here. I used the -v option to see where it stops - which tells me: debug1: Trying private key: /home/test/id_rsa debug1: PEM_read_PrivateKey failed I presume this is because SFTP is expecting a .PEM key instead of a PPK?
View 1 Replies
View Related
Feb 7, 2010
I really hope someone could help me with this problem. I've been stuck on this for a month.I am using the sftp command to upload files using a bash script.The problem is that it is extremely slow to do it this way. as many of you would know if you have shared server somewhere. I would use scp if remote server supported it, but it doesn't.
Anyway, If any of you have ever used FileZilla, in the Settings, if you go to "Transfers" there is a place where you can set the number of "maximum simultaneous transfers". This feature works wonders with SFTP (and FTP too). It really speeds things up. How do I accomplish this same thing with the sftp command... because I don't want to use a GUI. I don't even mind using FileZilla through the command line if possible... but it does not seem to be possible. I've been stuck on this for a month!!! I've searched everywhere and tried a lot of things with no avail...
View 6 Replies
View Related
Feb 20, 2010
I want to use a cron job to backup my files to my server. Now when I run the script manually, I get an error when backing up (something and sftp file being used or so). I only get this when I'm simultaneously connected to my server with sftp. So to be sure that this doesnt happen when I wont be there anymore to look at the log, I would like to know if there is a command to kill all sftp connections. I would put this command in the backup scrip cron uses.
View 4 Replies
View Related
Apr 27, 2010
I have set up a local server for testing on my home network and installed openSSH. I can login using filezilla and SFTP and can even download files. Error messages saying cannot find directory (the directory I am trying to upload)?
Do I need to configure openSSH to allow this. I am using my usual ubuntu login. Maybe I need to set up another user for SFTP.
View 4 Replies
View Related
Apr 6, 2010
if lets say 'someuser' sftp's into the box what is he actually able to do?Looking at my tests he can browse any directory to which he has read permissions but is only able to delete files in /home/someuser, even if they are owned by root. On the other hand in any folder above /home/someuser he would NOT be unable to delete a file even if its chmoded 777. Can anyone please confirm these findings.
View 4 Replies
View Related
Jul 24, 2011
As a Windows user, I generated a pair of DSA keys from CoreFTP Lite and sent it to a third party that runs an SFTP server. They told me that a valid DSA key needs to have ssh-dsa at the start and the username@systemname at the end. CoreFTP generated neither the ssh-dsa header nor the username@systemname footer. I tried with WinSCP and it didn't generate them either. Is there a difference between how SFTP works between Windows and Linux? If I put a useraccount@systemname at the end of the text will it work? How would the Linux system validate that my system is called "systemname"? If it can't validate, what is the purpose of adding it?
View 2 Replies
View Related
