Ubuntu Networking :: Linksys Wpc54g V4 Not Working On Karmic
Mar 29, 2010
I really need to get a linksys wpc54g version 4 pcmcia card to work....i have never really had a lot of problems with wireless and thit is a friends laptop that he wanted ubuntu on......if i cant get it to work he will go back to windows and i would not like that to happen lol....here is the output of dmesg and ifconfig lspci and lspcmcia..
Code:
thomas@thomas-laptop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-20-generic (buildd@palmer) (gcc version 4.4.1
[Code]....
View 3 Replies
ADVERTISEMENT
May 20, 2011
In the past I've installed 9.10 using a hardwired network port for the web with the above card in the machine. After the install I got a notification of an update which downloaded the appropriate software for the above wireless card. Worked like a charm. Today I installed 11.04 and zilch. No wireless. Supposedly the firmware is missing. I guess my question is why is something that worked well in the past now missing?
View 3 Replies
View Related
Mar 21, 2011
Does anybody know where to find Linksys wpc54g driver for Ubuntu 10.10?
View 3 Replies
View Related
May 14, 2010
I just installed Ubuntu 10.04 on my formerly XP system, and I'm trying to get my wireless network working. I have a Linksys WUSB11 v2.6 wireless adapter connected by USB to the system.
The system networking icon reports "No wired networks".
I'm not sure whether or not the system sees the USB ports... If so, it apparently doesn't recognize the adapter.
I saw a few posts that indicated that this adapter didn't work on 10.04 but it had worked on 9.04.
I'm looking for any info to get this working, including any or all of the following:
* How to determine if the system sees the USB ports (or is it "obvious" that it does)
* Should the wireless adapter work just by plugging it in?
* How to troubleshoot the networking adapter to get it working
* (If downgrading to 9.04 is likely to solve the problem) how to downgrade to 9.04 from 10.04...
View 9 Replies
View Related
Jun 8, 2010
The Linksys USB Wifi Adapter (WUSB11 v2. does not work with UBUNTU.
I am using UBUNTU DESKTOP 64-bit (x86_64) 10.04, but I think it is not working in the 32-bit version as well.
I really love to get my Ubuntu work with my 64-bit hardware....
View 3 Replies
View Related
Oct 17, 2010
I'm running Ubuntu 10.10 Maverick on a Toshiba 2435-S255 laptop with a WPC54GSV2 PCMIA wireless-g adapter. I have ndiswrapper installed, and installed the driver (I know it works because it's the same driver I used with Win XP). When I type sudo ndiswrapper -l it tells me this:
Code:
lsbcmnds : driver installed
device (14E4:4318) present (alternate driver: ssb)
I think I am supposed to blacklist something but I don't know what. I added b43 to blacklist.conf and that just took away the wireless connections in the network connections. In the Device Manager under CardBus Bridge it has Network Controller and info.linux.driver's string is ndiswrapper. I wanted to uninstall the driver to see what the Device Manager would show but I don't know the name of the driver. I did sudo ndiswrapper -r 14E4:4318 and it just said there was no driver by that name.
View 9 Replies
View Related
Jun 24, 2011
I have a WPC100 linksys network card. I have ubuntu 11.04 installed. My laptop is a D610.
I have done a LOT of google searching and not seeing any solutions on how to successfully get it working.
I have tried the ndiswrapper and it does install the driver but then says "no hardware present".
I have also blacklisted the broadcom drivers.
I am coming to the conclusion that it will never be possible to get the WPC100 to work. (note I also have been to the support page and do not see it there. )
View 9 Replies
View Related
Feb 16, 2011
I have a AE1000 wireless adapter and Ive been using it or about 4 months on windows xp. Yesterday I installed ubuntu 10.10 and it won't work It won't connect to the internet and won't even show signs that it is turned on.
View 5 Replies
View Related
Aug 4, 2011
I have an old ibm thinkpad R40. I did a fresh install of natty. Cannot get wireless or wired to work. I just want the wireless to work first if possible. So I have no Internet access. Can't upgrade etc. I am a noob and need to be hand held and walked through process.
View 9 Replies
View Related
Jul 30, 2010
I'm not a new user to ubuntu but I'm stuck with a driver issue on a wireless adapter upgrade for ubuntu 10.04 lucid lynx. I'm running an acer aspire am1201-e1622a with amd athlon x2 64 bit processor, however i'm only running the 32 bit version of lucid lynx. The following are a few outputs of some commands that might assist in finding the proper driver. Before though i will tell you what i have done.
I have installed a few different drivers from windows wireless driver installer such as the xp and vista 32 and 64 bit versions with no success in the computer actually recognizing that i have a wireless adapter installed. The windows wireless driver installer said that hardware was present but i was unable to scan for networks or even see that i had a choice to do that. This meaning that it didn't show i had wireless capabilities in my network manager. i tested this with gnome network manager which is the default manager for 10.04 and also with wicd with no success.
Following these tests i attempted to install a driver from source following the instructions on another forum. This allowed me to manually turn on the wireless adapter but i was still unable to find any networks. This meaning that wicd was able to see that i had a wireless adapter installed but it for some reason was unable to see any wireless networks around. I'm 100% sure my router is in range and that it is configured correctly. I have 5 other computers connect to this router along with some of them being ubuntu.
[Code]....
View 2 Replies
View Related
Mar 1, 2010
I have a WUSB600N v2 and it is working great for me. Here is all you have to do. Go here and download the RT3572USB driver [URL] The file you download is called 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2 expand it with the command "tar xjf 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2"
open the file os/linux/config.mk and edit the following lines: Change HAS_WPA_SUPPLICANT=n to HAS_WPA_SUPPLICANT=y and Change HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n to HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y
Next edit the file common/rtusb_dev_id.c and add the USB ID of the card to it. {USB_DEVICE(0x1737,0x0079)}, /* WUSB600Nv2 */
sudo make
sudo make install
reboot and your done.
If you have added the USB device to any other drivers following other threads you will want to either remove that line and recompile those drivers OR black list those drivers. After doing the above this NIC is working great for me in Ubuntu 9.10 and getting N speeds.
View 8 Replies
View Related
Jan 7, 2010
Finally took the plunge and upgraded my ubuntu studio to karmic from jaunty. I seem to be experiencing a problem many have, being that my wifi card (edimax) which worked on my previous distro is now not working at all. I've done a lot of research and found the problem seems to mainly be with broadcom cards, and have tried a number of things relating to those that have worked for others, with no luck.
My problem seems to be not that the drivers wont activate or anything like that, my problem is that under hardware drivers nothing appears at all. I have no drivers present, where most people are talking of 3. i have not found anyone else with this problem. My problem is compounded in addition by not being about to use a wire connection at all.
View 3 Replies
View Related
Jan 20, 2010
Today my wireless has stopped working. I have a laptop hp6720s with network controller: Intel corporation PRO/Wireless 3945 ABG [Golan] Network connection (rev 02), dual boot vista/ubuntu 9.10, fully updated (kernel 2.6.31-17). I use a router edimax BR-6204 wg to use the net with other laptop. Till now i have using wicd for controll wireless without any problem, internet was quick and responsive. (Quick connection without any failure).
But today the internet was very slow and wireless starts to connect and disconnects intermitently, doing it unusable. This was what occured when i upgraded from jaunty to karmic and used the network manager from gnome, but then i fix the problem installing wicd. Now wicd behaves in the same way as gnome-network-manager. If i connect directly the computer to the router by wire, i have internet and everything works perfectly. How i can fix the wireless?. How i can do it works with ubuntu 9.10 and?.
View 1 Replies
View Related
Feb 14, 2010
I love Ubuntu but so far a lot of the network devices I've tried have been nothing but problems. I'm adding a second NIC to my Karmic 9.10 desktop. It's been 2 weeks and I've tried 2 other cards already with no luck. It's especially frustrating because I thought I did my homework on this one and read that it's plug and play on 9.10 here: [URL]... This is the link to where I bought it: [URL]...
[Code]...
I looked around the forums and tried a few things like modprobe 8139too. The card still is not working. Was that the right thing to do with this particular card?
View 9 Replies
View Related
Mar 1, 2010
On a fully updated Ubuntu 9.04 system, I had successfully configured wvdial to connect using a USB modem ("Update" brand) with an ID of 067b:0611 (uses the pl2303 driver module). In considering an upgrade to Ubuntu 9.10, I tried a LiveCD and was unable to connect using wvdial. However, because I had made the CD a couple months before, I went ahead with the upgrade (via the internet; not a fresh install) in the hopes that it would end up working or I would be able to find a solution for it.
The Problem: The upgrade was a success as far as I could tell, but when I tried to connect to the internet with wvdial, I was not able to. I checked the wvdial.conf settings to make sure they were the same as before, added some new ones I thought it might need, unplugged the modem and replugged it, restarted my system, etc., but all to no avail. Whenever I would try to run wvdial to connect, I would get the following output:
Code:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
[code]....
This was different than the output I used to get with wvdial, but when I went over to my browser (Firefox) the internet worked fine. I'm assuming my email client and other things will work okay as well, but have not tested them as of yet.
A final touch I did to make connecting a bit less 'painful' was to right-click on the panel (at the top of the default Ubuntu screen), and click on 'Add to Panel'. Then I selected 'Custom Application Launcher', chose 'Application in Terminal' for 'Type', gave the launcher a name, pasted in that 'horrifically' long command line above, gave a brief description in the 'comment' box, then pressed 'OK'. Voila! I now have a launcher on my panel that with a single-click will bring up a terminal screen where I enter my sudo password and it connects. Then when I want to disconnect I just go back to that terminal, press Ctrl+C, which promptly disconnects me and causes the terminal to vanish into thin air.
Now, I don't know enough about this stuff to know why this command worked and wvdial didn't, but if you know, feel free to post a reply. Or if you'd like to see what settings I had for wvdial that worked in 9.04 but not in 9.10, let me know. Or if you think it's worth checking to see if this should be posted as a bug in either wvdial or Ubuntu, you can mention that as well.
View 4 Replies
View Related
Feb 16, 2010
Just installed 9.10 netbook remix on my acer aspire one - No Wireless !
search showed all kinds of comments but few solutions most just claimed it worked or others tried madwifi without success.
View 2 Replies
View Related
Feb 9, 2010
My wireless LAN connection on this machine occasionally stops working. The network traffic bar shows periodic very small transmissions but the failure of all network dependent applications (Firefox, package manager, etc.) indicates to me that the machine is no longer talking to the net. I can fix it by reselecting my home network in nm-applet from the drop-down list. This causes the machine to disconect, reconnect and all is well for some random period of time thereafter. Here's some data:I'm running an HP Pavillion laptop.
Code:
~$ lspci | grep Wireless
02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Code:
~$ lsmod | grep iwl
iwlagn 124768 0
iwlcore 134820 1 iwlagn
mac80211 243496 2 iwlagn,iwlcore
[code]....
I don't know if this is related or not, but a couple of months ago I unsuccessfully attempted to share a hotel's wired Internet connection over my wireless card. I may have hosed some settings or it could be unrelated.The "unknown interface" portion of the restart attempt is interesting but I don't know enough to fix it.
View 1 Replies
View Related
Jan 4, 2010
So i installed Karmic Koala on my HP mini and obviously the wireless driver does not work from the get go. so instead i decided to try to connect my Davicom (9601 chip) USB to ethernet adapter and then get all the appropriate stuff (NDISwrapper/broadcom driver etc.) through a hardline. yet that is proving difficult as well.
kernel is 2.6.31-14 The system sees the adapter. i have the driver for it but it will not compile. i keep getting errors on compile. probably as the driver is a touch old. I did a search and read through all of the old threads concerning the davicom adapter. i tried to blacklist the tulip driver that didnt work. I read through the thread that talks about modifying the config.h to modify configfs.h but that only concerns releases prior to mine.
I grabbed this driver [url]
View 5 Replies
View Related
Aug 8, 2010
I got the WMP300N installed by using ndiswrapper, but in Network Settings in YaST, I enter in all the info, and it will not connect. I set the Module Name as ndiswrapper, but it still won't connect. I blacklisted bcm43xx as some guide told me to. Could that be the problem?
View 2 Replies
View Related
Jul 12, 2011
The usb device scans in Windows with a driver but i can't find a linux driver so i installed ndiswrapper.
ifconfig does not list the wlan0 device. iwconfig lists wlan0 YaST2 doesn't find any networks. Ethernet works just fine.
View 7 Replies
View Related
Mar 3, 2010
I just joined this forum in hope of fixing my linksys wireless card, here is my problem. I have a old Compaq presario 1710sb laptop with a p1 32mb ram and a 2GB hard drive. I installed a Debian Lenny command line only install, I installed ndiswrapper from a etch .deb file I found on the internet but I can't find out how to get it working. I tried how tos on other sites but they didn't work, I need to get that card working before I can install a GUI.
View 14 Replies
View Related
Jan 30, 2010
I read through the sticky of wireless card not working, and I followed through with the steps, with the exception of looking for firmware, because I'm certain it has it, being that the card works when I'm running Windows, and overall the system recognizes the device.
The only difference is, I notice that the activity light on the card itself does not turn on when running openSUSE. It recognizes the card, it even detects the network, but when I enter the WEP key and finish, it does nothing afterwards. Still no internet.
Card: Linksys WMP54G v4.1
View 5 Replies
View Related
Aug 8, 2010
FC13 i686. Trying to compile a driver for Linksys WUSB600N Ver. 2 from a Ralink driver.tar.gz. Below is a portion of the output of the compile, I can't put this whole output on this LinuxQuestions Website it is to large.
In file included from /lib/modules/2.6.33.6-147.2.4.fc13.i686/build/include/linux/usb.h:21, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/os/rt_linux.h:62, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/rtmp_os.h:42, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/rt_config.h:72, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/common/crypt_md5.c:28:
/lib/modules/2.6.33.6-147.2.4.fc13.i686/build/include/linux/sched.h: In function "get_mm_hiwater_rss": .....
View 5 Replies
View Related
Apr 16, 2010
Any wpc54g wireless adapter be converted to version 7.1 or 7.2 which should be wpa2 compatible?
View 1 Replies
View Related
Nov 5, 2010
I can't seem to get my adapter to work on my Debian Squeeze system. I have the wpc54g linksys notebook adapter and disk... but the disk will not autorun...I have gotten as far as to the adapter being activated, shows connection 97%, but I can't surf!
View 6 Replies
View Related
Dec 1, 2010
I'm trying to connect to a friend's Linksys WAG160N router using Ubuntu 10.10, but it's just refusing to connect. I can connect to other wireless networks fine - it seems to just be this router. The wireless indicator applet thing shows that I'm trying to connect, but the password box always just pops up again and again. I'm certain I've got the password correct and am able to connect under OSX on the same computer. Connecting to it via ethernet also works fine.
View 1 Replies
View Related
May 22, 2010
Ubuntu 10.04 not seeing my WUSB300N. What is the Easiest way to get this working?
View 1 Replies
View Related
Apr 16, 2010
Been several hours trying everything up to and including blueman. Things SEEM to be working, but try to browse files on my Nokia phone I still get
Could not display "obex://[00:1F:5D:33:2C:BD]/".
Error: Connection to the device lost
Please select another viewer and try again.
Not sure how to try to connect, phone sees computer and vice versa, but can't get a connection. The phone asks if I want to accept the connection, I press accept, the window comes back with Connection Failed: Network Manager Failed to activate the connection. If I try a serial connection it says Port already in use. I don't actually know what that means.
View 1 Replies
View Related
Feb 20, 2010
I have loaded ubuntu 9.10, and am not getting internet from my router using a linksys EG1032. I have found articles stating that i should use the sk (URL...) or nge URL...)drivers. According to the instructions i found, they require that i make changes to my kernel config. I do not know how to do that, or if doing so is wise.If someone would help me figure out how to connect this NIC card.
View 7 Replies
View Related
Mar 25, 2010
My first Ubuntu/Mythbuntu install. Installed OS, plugged in linksys wireless G adapter. It finds the network but cannot connect. Discovered wireless priviledges while setting up admin/user accounts. Should be ready to go. or not, I'm thinking it needs a driver but
1) in linux? certainly not in Fedora.
2) If it can see the network it doesn't need a driver,
My settings are wrong or I'm missing something. SSID is set in settings. Do I need mac address and BSSID?
View 1 Replies
View Related
