Ubuntu Networking :: Linksys WMP54G Not Connecting To Wireless
Nov 12, 2010
I've just installed Ubuntu 10.10 and everything seems to be working fine, but I can't seem to connect to my wireless network. I am able to see the wireless networks nearby, so I'm guessing that means the drivers are fine and the hardware is working. When I try to connect, I am seeing the wireless networks of my neighbors, but mine isn't showing. So I manually enter the information in and try to connect, but it doesn't seem to connect. I enter the WEP key and it attempts, then the WEP key screen pops up again, as if I entered the key incorrectly. I've tried many times and I'm 100% certain my key is correct. By the way, the chipset is: Ralink RT61
Which means it really should just work out of the box.
I just installed Fedora again, after a long absence. I have been using XP. I am having issues setting up my wireless card Linksys WMP54G. For some reason the card has been recognized, and the interface is there. But I have tried every walk-trough known to Google, and it still won't work. I have been using the GUI tools, but they don't work. I have also been using the command line walk through, and they aren't working either. Does anyone know which files I need to set and what the process would be?
After spending several months coming up with ideas (and ultimately failing), I have found the easiest and simplest way to connect your Ubuntu desktop (or laptop w/o a wireless adapter/card) to the Internet using only a Linksys Wireless Range Expander and an Ethernet cord.
YOU WILL NEED: Linksys Wireless Range Expander (WRE54G) Ethernet cable
Linksys wireless router (that is providing your home/office with wireless Internet) The WRE54G can be purchased online through various websites, including eBay. They run anywhere between $10 and $40, but it's going to be cheaper than a USB Wireless Adapter (and no software needs to be installed, making it universal for most Linux distros).
Trying to get Linksys WMP54G (RaLink RT2561/RT61 802.11g PCI) card running in FC12 with WPA. The drivers are included in the distro. No luck with network manager. [root@nitefall ~]# lspci -v | grep -i network 01:00.0 Network controller: RaLink RT2561/RT61 802.11g PCI .....
When I try to do ifup wlan0 I get: [root@nitefall ~]# ifup wlan0 Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0... <hangs there for a while>
I get the above error with or without encryption enabled at the AP. I've been over hundreds of posts on dozens of pages and nothing has worked. I have a dual-boot and the card works perfectly in Windows, so it's not a hardware issue.
I've got a Linksys WMP54G Pci card of some kind that's being reported as a Ralink rt2500 pci, but it is very slow (50k/s cap) and has jumpy signal strength (goes between 70% and 10% every second or so, while the router is in the same room). It is just this pc, as I'm using my laptop fine right now with no such condition. I am running basically a fresh version of Slackware 12.2, so it's kernel version 2.6.27.7. I have used this with Slackware 13 and there was absolutely no issue, so I think it may be a wrong or outdated driver, but building kernel modules and updating whatever module it should be is not something that I'm very good at.
I have loaded ubuntu 9.10, and am not getting internet from my router using a linksys EG1032. I have found articles stating that i should use the sk (URL...) or nge URL...)drivers. According to the instructions i found, they require that i make changes to my kernel config. I do not know how to do that, or if doing so is wise.If someone would help me figure out how to connect this NIC card.
I am trying to connect my desktop to the internet via my Linksys wireless usb WUSB11v2.8 adapter. My network showed up in the Network manager as soon as I installed Fedora and it asked for my network key, but it still doesn't connect. It just keeps asking.I was reading that possibly the driver is not compatible with the OS. I heard about RPMs and the ndiswrapper program that supposedly is supposed to help with compatibility issues so I went and installed both via a direct ethernet connection.
I guess my question is now since I have these programs, what else do I need and how do I go about completing the installation? I pretty much need to be baby stepped by step into how to do this including the best place to install the software, what files do I need, and where and how if I even need to get my device's chipset.
I'm having some trouble connecting to the wireless network here at home. The PC has a Linksys WMP600N wireless network card, which works fine under several versions of Windows. In Opensuse however, I cannot get it to find the network. Even though my laptop is right next to it, which has perfect connection to the network. The router is a Linksys WRT610N.
I've tried running iwconfig and iwlist scan in the terminal, but the scan returns no results and iwconfig indicates it does not have a connection to a network. I've turned off IPv6 as I read this can sometimes cause issues. I've also tried issuing the computer a static IP address, figuring the DHCP might be causing problems, but all to no avail.
My first Ubuntu/Mythbuntu install. Installed OS, plugged in linksys wireless G adapter. It finds the network but cannot connect. Discovered wireless priviledges while setting up admin/user accounts. Should be ready to go. or not, I'm thinking it needs a driver but
1) in linux? certainly not in Fedora.
2) If it can see the network it doesn't need a driver,
My settings are wrong or I'm missing something. SSID is set in settings. Do I need mac address and BSSID?
Previously I had my desktop hooked up to a nearby router via an ethernet cord with my parents' computer having a wireless usb adapter to connect (This thing: [uRL]). We just moved and our setup has reversed (router is near their computer, I am using the usb adapter). I just installed the latest Ubuntu and now I can't get the usb adapter to work. I'm very new to Linux and I have no idea what to do. I think this is the same usb adapter.
I have a linksys wireless-b wmp11 network card. Can anyone tell me how to get this up and running? Maverick is up to date as of yesterday and I have the cd that came with the card. I have no way to access the internet on the machine. I am typing this from my laptop.
i cant connect to my wireless network... im using karmic. Ive searched and found quite a lot of threads but arent sure where to start. I have a Linksys wusb600n, and are trying to connect to my network. It detects the network fine but doesnt connect.
I've tried it using the Ubuntu 9.10 live CD (both 32-bit and 64-bit versions) and while the adapter can see wireless networks, it can't connect to them. It asks me for my WPA2 key, but after trying to connect for about 30 seconds it asks me for it again. I've read other threads about this issue but they were kind of confusing.
I just need to know whether the adapter will work and if so, how to get it to connect. I'm so sick of Windows and I'd love to switch to Linux, but I won't be able to if I can't get my adapter to work.
Edit: I just noticed the sticky about posting wireless tickets. I'm sorry, I don't have time to post it right now, but I will post all of that information when I get back.
I have a dual partition with xp pro, and Ubuntu 10.04. It really is amazing, and i plan on erasing everything and starting over new again, this time just ubuntu. with windows, i have a Linksys Compact Wireless G usb Network Adapter with speedbooster ver.2. it works in windows from the CD, but its for windows. ive tried ndiswrapper-utils, ndiswrapper-common and ndisgtk downloads and it opened the program, but sat with the spinning circle for 5 seconds then faded to grey. HOW do i get this to work? i'm in a hurry, as i am leaving for vacation in florida, and i have the only laptop in the house and we bring it every year. If there is something easy (or complicated but with step by step) that i could use to get the driver for my usb network thingy,
I am completely new to Linux and have just installed Xubuntu on an old HP machine. Until I buy a long enough ethernet cord to reach my router upstairs, I would like to try to make use of a Linksys wireless USB network adapter that I have (WUSB11 ver. 2.. I looked around online and I got pretty confused. I don't know where to start.
I have an Acer Aspire 1 Netbook - this is running UBUNTU- When I try to connect to my Linksys Router in wireless mode it asks for password - but doesnt accept. I can see the Linksys in network manager plus several other networks in the vicinity. My other wireless devices all connect O.K. to the Linksys, and accept my password.. I can hard wire by ethernet to the netbook. Just wireless is the problem
I have installed Ubuntu 11.04 and for several days have tried many, many different ways of installing my Linksys WPC 11 wireless card into my IBM Thinkpad T30 laptop.
I have got the wireless working by installing Ubuntu 8 and then upgrading to the current version, and I would assume some drivers are currently installed.
As usual though, the signal drops out after only a few minutes and I have to keep re-booting the laptop to continue what I'm doing.
I'm unable to use Cisco Linksys Wireless-G USB adapter - Model No. WUSB54GC ver 3.
Ubuntu distribution : Hardy Heron (updated)
Desktop Environment : wmii
lsusb :
Code: Bus 007 Device 006: ID 1737:0077 Bus 007 Device 003: ID 04f2:b008 Chicony Electronics Co., Ltd Bus 007 Device 001: ID 1d6b:0002 Bus 006 Device 001: ID 1d6b:0002
[Code]....
Tried startup with device connected, no success.
Read some threads which generally correspond to version 2 of the device.
It probably uses Ralink chipset(cmiiw). I neither have Rt73 nor prism2_usb installed, confirmed by lsmod.
I have an HP PSC2110 that is connected to a Linksys WPSM54G wireless print server. Printing works great, no issues what so ever. I am wondering if anyone has been able to configure the scanner to work that way as well. If I connect the PSC2210 to my laptop via USB, XSane sees the scanner and works perfectly. I am trying to figure out if there is a way for XSane to see the scanner through the Linksys PS?
Karmic 9.1 64 bit Toshiba Satellite L455 Linksys WPSM54G ver 1.1 HP PSC2110
i installed ubuntu 10.04 from internet.but i cant connect to my wireless router linksys wrh54g ver 1.0,but if i using Local area connection its working,however my wireless connection working in my other os win xp.
I have a Linksys Wireless-G USB Network Adapter, 2.4 GHz, 802.11g. It hooks up through USB plug, and when I originally plugged it in I got the message that ubuntu didn't support the drivers, but haven't seen it since. I'm hooked up to a LAN cable right now, and can't seem to figure out how to hook up through wireless with this device. Or I just don't know how. When I click on the network connections button on the top right corner (the two computers). I can see my Wired Internet, but no wireless. When I type lsusb in a terminal I get : (sorry I don't know how to do code blocks) So it is recognizing that it's there, but maybe I just don't know how to use it. Also, I'm running Ubuntu Release 10.04 (lucid).
I have a AE1000 wireless adapter and Ive been using it or about 4 months on windows xp. Yesterday I installed ubuntu 10.10 and it won't work It won't connect to the internet and won't even show signs that it is turned on.
I have a Linksys WAG54G2 Router - this is set up and was working fine with Xp and my Apple I phone.I have just changed over from XP to Ubuntu, and am having difficulty in configuring wireless settings to accept UBUNTU.The hard wired Ethernet connection works fine.
I've got an old laptop wich wireless adapter is a Gigabyte GN-WI01 GS MINI PCI(its chipset is Realtek RTL8169/8110, I believe) and I'm not able to make it run in Wifislax 3.1 Live CD. I downloaded the linux drivers for it and tried to install them following the instructions but when it came the time to execute configure.sh it told me that I had to actualize some kind of packets first(GK+ or something like that can't remember ). I also have another wireless usb adapter that I tried to use too. It's a Linksys WUSB54g v4(chipset: rt2570). I tried to follow a guide I found about making run an adapter like that on Wifislax 3.1 but when I had to "Force ralink rt73 on rt2500" it doesn't appear on my Live CD version, it appears "Force ralink rt73 on rt2570", dunno if it has something to be but I get an error while making it.
I don't know if it has to be with my laptop, my wireless adapters or my way of following the steps. If it has to be with my adapters I would like to buy some new one(not very expensive) that I won't have any problems running it on Wifislax and that will work on my old laptop(cause I just have that one and can't afford a new one).
Linksys WUSB54GP Not Found, Can't Connect to Wireless - 10.04 Lucid Lynx
I am having a problem setting up my wireless on Ubuntu 10.04 (Lucid Lynx) on my desktop computer using a Linksys Wireless-G Portable USB Adapter WUSB54GP.
The wireless has run fine on my Thinkpad X60s laptop running Lucid and with my desktop and the same USB adapter in Karmic (9.10). When I installed Lucid as an upgrade on the desktop, I could not see the adapter listed at all and could not connect wirelessly to the internet.
if I need to install drivers, edit a file, or do something else to get this working I couldn't find anything useful to actually solve my problem after searching for a while.
This should be all the important desktop system specs: Linksys Wireless-G Portable USB Adapter WUSB54GP -- not found; can't connect to wireless internet Lucid Lynx 10.04 (straight install from CD from Canonical)
Situation is a cable modem and a Belkin F5D8235 Wireless-N router (and a computer) are at one end of the property. Approx 150-200 ft away I want to put 3 desktop computers none of which have a wireless card or device. I DO have a Linksys WRT54G I'm not using.I want to hardwire the 3 desktop computers to a switch that is hard wired to the Linksys. Putting a wireless card in one of the 3 computers is not practical because of physical obstructions (a lot of cabinetry, furniture, walls) that the Linksys (which can be at the window) would not have to deal with.
Is it possible for the Linksys to 'receive' the wireless signal from the Belkin so the 3 desktops can share the internet? If not, what could I put in the window to 'receive' or 'repeat' the wireless signal?I know this isn't exactly a Ubuntu question, except that 2 of the 3 computers are 64bit Lucid.
Ok so I tried to follow the directions here: [URL] However, I couldn't find 2010_0915_RT3572_Linux_STA_v2.4.0.2.tar.bz2. Instead, the closest I could find was 2011_0407_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2 .5.0.2_DPO.bz2, so I tried it. I edited config.mk and rtusb_dev_id.c as chili555 advised. I tried to edit linux_rt.h, however, the only file I saw was rt_linux.h. I edited it according to chili555's post, message #7. I went back to the root directory of the extracted .bz2 file and did
I recently purchased the Linksys WMP45G wireless card for my desktop (as my router is too far for ethernet cable). I can't get it to work. The NetworkManager icon doesn't appear in the upper-right corner, despite being up-and-running. Here is some output:
[root@cwatson ~]$ uname -a Linux cwatson.homeunix.net 2.6.18-194.11.1.el5.centos.plus #1 SMP Wed Aug 11 08:19:38 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux [root@cwatson ~]$ yum list installed "Network*"
I'm not a new user to ubuntu but I'm stuck with a driver issue on a wireless adapter upgrade for ubuntu 10.04 lucid lynx. I'm running an acer aspire am1201-e1622a with amd athlon x2 64 bit processor, however i'm only running the 32 bit version of lucid lynx. The following are a few outputs of some commands that might assist in finding the proper driver. Before though i will tell you what i have done.
I have installed a few different drivers from windows wireless driver installer such as the xp and vista 32 and 64 bit versions with no success in the computer actually recognizing that i have a wireless adapter installed. The windows wireless driver installer said that hardware was present but i was unable to scan for networks or even see that i had a choice to do that. This meaning that it didn't show i had wireless capabilities in my network manager. i tested this with gnome network manager which is the default manager for 10.04 and also with wicd with no success.
Following these tests i attempted to install a driver from source following the instructions on another forum. This allowed me to manually turn on the wireless adapter but i was still unable to find any networks. This meaning that wicd was able to see that i had a wireless adapter installed but it for some reason was unable to see any wireless networks around. I'm 100% sure my router is in range and that it is configured correctly. I have 5 other computers connect to this router along with some of them being ubuntu.
