Ubuntu Networking :: Linksys AE1000 Wireless Adapter - Creating /tftpboot

Jul 8, 2011

Ok so I tried to follow the directions here: [URL] However, I couldn't find 2010_0915_RT3572_Linux_STA_v2.4.0.2.tar.bz2. Instead, the closest I could find was 2011_0407_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2 .5.0.2_DPO.bz2, so I tried it. I edited config.mk and rtusb_dev_id.c as chili555 advised. I tried to edit linux_rt.h, however, the only file I saw was rt_linux.h. I edited it according to chili555's post, message #7. I went back to the root directory of the extracted .bz2 file and did

[Code]...

View 5 Replies


ADVERTISEMENT

Ubuntu Networking :: Linksys AE1000 Wireless Adapter Not Working?

Feb 16, 2011

I have a AE1000 wireless adapter and Ive been using it or about 4 months on windows xp. Yesterday I installed ubuntu 10.10 and it won't work It won't connect to the internet and won't even show signs that it is turned on.

View 5 Replies View Related

Fedora Hardware :: Linksys AE1000 Network Adapter Not Supported

Jan 3, 2011

The linksys AE1000 is not supported by linux according to the linksys website. Are there any workarounds? I use this network adapter to connect to my wireless network, and it is basically useless at the moment.

View 6 Replies View Related

Ubuntu Networking :: Linksys AE1000 Under 64bit 10.10?

Feb 18, 2011

Here is the situation: I am currently running Ubuntu 10.10 64 bit. I'm trying to get my Linksys AE1000 to run correctly. I have followed many tutorials but most notably was:[URL].. lsmod shows that rt3572sta is loaded. network manager in gnome is able to find my router. my problem occurs when it tries to connect to the router using wpa2 security. It continually asks for the wireless password then will freeze the system after a number of attempts. After digging in for a bit, I was able to dig out a dmesg trapping the error:

BUG: unable to handle kernel paging request at ffffcfb0138af1ec
IP: [<ffffffffa021c7e8>] Cntl0idRTBssidProc+0x78/0x570 [rt3572sta]
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map
CPU 2

I really don't see the need to continue on with those error messages lsmod still shows rt3572sta after the failure. In case anyone wants to see the changes I have made to the files before the make, I have included them. but changed the extension to "txt" to accommodate the up-loader and my rt_linux is too big to fit here, just not that it was 2 lines that were changed to work with the kernel. If anyone wants to know what I mean by the system freezes, I do mean just that. The mouse will continue to work, but I am then unable to open any programs, unable to reboot the computer. it requires a hard reset.

I have uninstalled the drivers, installed them, make them, make install them, make clean, start from scratch a few times, and am getting no give here.

View 7 Replies View Related

Ubuntu Networking :: Linksys AE1000 Not Starting On Start Up?

Jul 29, 2011

I recently purchased the Linksys AE1000 wireless USB network adapter. After some struggles, I found and installed the Ralink_RT3572USB_drv2400 driver for it and it now works, however it won't turn on when I boot up the computer. I have to manually unplug and then plug the adapter back in for it to work again. I followed the instructions on this how to for installing the driver.

[URL]

View 2 Replies View Related

Ubuntu Networking :: 10.04 And Linksys USB Wireless Adapter

Jul 13, 2010

Previously I had my desktop hooked up to a nearby router via an ethernet cord with my parents' computer having a wireless usb adapter to connect (This thing: [uRL]). We just moved and our setup has reversed (router is near their computer, I am using the usb adapter). I just installed the latest Ubuntu and now I can't get the usb adapter to work. I'm very new to Linux and I have no idea what to do. I think this is the same usb adapter.

View 1 Replies View Related

Ubuntu Networking :: WUSB11 V2.8 Linksys USB Wireless Adapter?

Jan 28, 2011

I am completely new to Linux and have just installed Xubuntu on an old HP machine. Until I buy a long enough ethernet cord to reach my router upstairs, I would like to try to make use of a Linksys wireless USB network adapter that I have (WUSB11 ver. 2.. I looked around online and I got pretty confused. I don't know where to start.

View 7 Replies View Related

Ubuntu Networking :: Unable To Use Cisco Linksys Wireless-G USB Adapter?

Jan 13, 2010

I'm unable to use Cisco Linksys Wireless-G USB adapter - Model No. WUSB54GC ver 3.

Ubuntu distribution : Hardy Heron (updated)

Desktop Environment : wmii

lsusb :

Code:
Bus 007 Device 006: ID 1737:0077
Bus 007 Device 003: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 007 Device 001: ID 1d6b:0002
Bus 006 Device 001: ID 1d6b:0002

[Code]....

Tried startup with device connected, no success.

Read some threads which generally correspond to version 2 of the device.

It probably uses Ralink chipset(cmiiw). I neither have Rt73 nor prism2_usb installed, confirmed by lsmod.

View 2 Replies View Related

Ubuntu Networking :: Linksys Dual Band Wireless NUSB Adapter Not Working On 10.04

Jul 30, 2010

I'm not a new user to ubuntu but I'm stuck with a driver issue on a wireless adapter upgrade for ubuntu 10.04 lucid lynx. I'm running an acer aspire am1201-e1622a with amd athlon x2 64 bit processor, however i'm only running the 32 bit version of lucid lynx. The following are a few outputs of some commands that might assist in finding the proper driver. Before though i will tell you what i have done.

I have installed a few different drivers from windows wireless driver installer such as the xp and vista 32 and 64 bit versions with no success in the computer actually recognizing that i have a wireless adapter installed. The windows wireless driver installer said that hardware was present but i was unable to scan for networks or even see that i had a choice to do that. This meaning that it didn't show i had wireless capabilities in my network manager. i tested this with gnome network manager which is the default manager for 10.04 and also with wicd with no success.

Following these tests i attempted to install a driver from source following the instructions on another forum. This allowed me to manually turn on the wireless adapter but i was still unable to find any networks. This meaning that wicd was able to see that i had a wireless adapter installed but it for some reason was unable to see any wireless networks around. I'm 100% sure my router is in range and that it is configured correctly. I have 5 other computers connect to this router along with some of them being ubuntu.

[Code]....

View 2 Replies View Related

OpenSUSE Wireless :: Install Linksys WUSB600n Dual-band USB Wireless-N Adapter Onto A Desktop System With 11.1 Installed

Apr 27, 2009

I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:

99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........

View 9 Replies View Related

Hardware :: Success With Linksys Wireless-g Usb Adapter?

Nov 11, 2010

I actually wasn't even trying to install the adapter which is the funny thing, I just finally got around to installing mandriva 2010 on my desktop and happened to have the adapter already hooked up to a usb port for my windows installation. When I got done with the installation to my amazement it got recognized and I didn't have to do a thing!

I looked into installing the adapter on my laptop which already had mandriva 2010 on it and gave up cause I didn't find any post's here that addressed the issue very well. Just thought I would pass it along for anyone who want's to try this on there computer.

View 3 Replies View Related

General :: Driver For Linksys Wireless Notebook Adapter WPC55AG

Sep 7, 2010

Looking for driver for Linksys Wireless Notebook adapter WPC55AG

View 1 Replies View Related

OpenSUSE Wireless :: Can't Access Wep Encrypted Network With Linksys Wusb11 Ver 2.6 Net Adapter

Aug 9, 2011

I have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.

lsusb

Code:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter
dmesg

[Code]....

View 9 Replies View Related

Hardware :: Connect Linksys WPC54gs (bcm4318) Wireless Adapter In CrunchBang?

Feb 11, 2010

I recently tried to install Crunchbang on my IBM Thinkpad T20 laptop. Everything went OK as far as I can tell (I still have to adjust acpi and display settings), but I cannot get my laptop to connect to the internet via wireless (wired connection works fine). I've done a good deal of searching online, and I realize that my wireless adapter (wpc54gs, bcm4318 chipset) is problematic in linux, and that b43-fwcutter is typically required. I did install b43-fwcutter, and it seemed to install OK, but nothing subsequently happened when I opened networkmanager. I'm not sure at this point if my problem is that I don't know how to configure any wireless adapter in crunchbang, or if it is that my particular adapter is not being recognized.

View 4 Replies View Related

General :: Ubunto Have Driver For WPC100 Linksys Adapter Wireless Card?

Jun 7, 2011

Does Ubunto have a driver for the WPC100 Linksys Adapter wireless card?

View 2 Replies View Related

CentOS 5 Hardware :: Finding And Installing A Driver For The Linksys WUSB300N Wireless Adapter?

Mar 23, 2010

finding and installing a driver for the Linksys WUSB300N wireless adapter.

View 1 Replies View Related

Ubuntu :: Get A Linksys Wireless USB Network Adapter WUSB54G To Work On Ubuntu 10?

Jun 5, 2010

I'm trying to get a Linksys Wireless USB Network Adapter WUSB54G to work on Ubuntu 10.

View 4 Replies View Related

Networking :: Creating A Virtual Ethernet Adapter?

Apr 14, 2010

I am trying to setup a VPN using OpenVPN to allow a secure connection between my smartphone and my LAN. I have been reading an OpenVPN book and some tutorials on how to setup the server side, but I'm stuck at how to create a virtual device. The OpenVPN book says when installing OpenVPN the installer (or aptitude to be more precise) should ask me if it should create a TAP/TUN device. The thing is, it doesn't ask me anything at all. It just installs, that's it.

Most tutorials simply tell me to create a new device in the network/interfaces file. Where is the difference? What should I do now? I like having options, that is one reason I like Linux, but this does confuse me. My second question is about the IP range of the virtual adapter. Should it be in the same range as my LAN, or should I use something entirely different?

View 1 Replies View Related

Ubuntu Networking :: Linksys Wireless G Won't Connect

Mar 25, 2010

My first Ubuntu/Mythbuntu install. Installed OS, plugged in linksys wireless G adapter. It finds the network but cannot connect. Discovered wireless priviledges while setting up admin/user accounts. Should be ready to go. or not, I'm thinking it needs a driver but

1) in linux? certainly not in Fedora.

2) If it can see the network it doesn't need a driver,

My settings are wrong or I'm missing something. SSID is set in settings. Do I need mac address and BSSID?

View 1 Replies View Related

Ubuntu Networking :: Linksys Wireless-b In 10.10 Desktop

Nov 11, 2010

I have a linksys wireless-b wmp11 network card. Can anyone tell me how to get this up and running? Maverick is up to date as of yesterday and I have the cd that came with the card. I have no way to access the internet on the machine. I am typing this from my laptop.

View 2 Replies View Related

Ubuntu Networking :: Can't Connect To Wireless Linksys Wusb600n

Jan 3, 2010

i cant connect to my wireless network... im using karmic. Ive searched and found quite a lot of threads but arent sure where to start. I have a Linksys wusb600n, and are trying to connect to my network. It detects the network fine but doesnt connect.

View 1 Replies View Related

Ubuntu Networking :: Can't Connect To Wireless With Linksys WUSB100?

Apr 1, 2010

I've tried it using the Ubuntu 9.10 live CD (both 32-bit and 64-bit versions) and while the adapter can see wireless networks, it can't connect to them. It asks me for my WPA2 key, but after trying to connect for about 30 seconds it asks me for it again. I've read other threads about this issue but they were kind of confusing.

I just need to know whether the adapter will work and if so, how to get it to connect. I'm so sick of Windows and I'd love to switch to Linux, but I won't be able to if I can't get my adapter to work.

Edit: I just noticed the sticky about posting wireless tickets. I'm sorry, I don't have time to post it right now, but I will post all of that information when I get back.

View 9 Replies View Related

Ubuntu Networking :: Linksys Wireless USB WUSB54Gv2 Support?

Jul 15, 2010

I have a dual partition with xp pro, and Ubuntu 10.04. It really is amazing, and i plan on erasing everything and starting over new again, this time just ubuntu. with windows, i have a Linksys Compact Wireless G usb Network Adapter with speedbooster ver.2. it works in windows from the CD, but its for windows. ive tried ndiswrapper-utils, ndiswrapper-common and ndisgtk downloads and it opened the program, but sat with the spinning circle for 5 seconds then faded to grey. HOW do i get this to work? i'm in a hurry, as i am leaving for vacation in florida, and i have the only laptop in the house and we bring it every year. If there is something easy (or complicated but with step by step) that i could use to get the driver for my usb network thingy,

View 2 Replies View Related

Ubuntu Networking :: Linksys WMP54G Not Connecting To Wireless

Nov 12, 2010

I've just installed Ubuntu 10.10 and everything seems to be working fine, but I can't seem to connect to my wireless network. I am able to see the wireless networks nearby, so I'm guessing that means the drivers are fine and the hardware is working. When I try to connect, I am seeing the wireless networks of my neighbors, but mine isn't showing. So I manually enter the information in and try to connect, but it doesn't seem to connect. I enter the WEP key and it attempts, then the WEP key screen pops up again, as if I entered the key incorrectly. I've tried many times and I'm 100% certain my key is correct. By the way, the chipset is: Ralink RT61
Which means it really should just work out of the box.

View 5 Replies View Related

Ubuntu Networking :: Cannot Connect To Linksys Wireless Router

Jun 12, 2011

I have an Acer Aspire 1 Netbook - this is running UBUNTU- When I try to connect to my Linksys Router in wireless mode it asks for password - but doesnt accept. I can see the Linksys in network manager plus several other networks in the vicinity. My other wireless devices all connect O.K. to the Linksys, and accept my password.. I can hard wire by ethernet to the netbook. Just wireless is the problem

View 3 Replies View Related

Ubuntu Networking :: Cannot Get Linksys Wireless Card To Work

Jul 10, 2011

I have installed Ubuntu 11.04 and for several days have tried many, many different ways of installing my Linksys WPC 11 wireless card into my IBM Thinkpad T30 laptop.

I have got the wireless working by installing Ubuntu 8 and then upgrading to the current version, and I would assume some drivers are currently installed.

As usual though, the signal drops out after only a few minutes and I have to keep re-booting the laptop to continue what I'm doing.

View 7 Replies View Related

Ubuntu Networking :: Wireless Connection With Linksys WUSB100?

Jul 16, 2011

I am trying to find a driver for my wireless adaptor WUSB100 before I install ubuntu again.

View 1 Replies View Related

Ubuntu Networking :: Using Scanner Through A Linksys Wireless Print Server?

Mar 4, 2010

I have an HP PSC2110 that is connected to a Linksys WPSM54G wireless print server. Printing works great, no issues what so ever. I am wondering if anyone has been able to configure the scanner to work that way as well. If I connect the PSC2210 to my laptop via USB, XSane sees the scanner and works perfectly. I am trying to figure out if there is a way for XSane to see the scanner through the Linksys PS?

Karmic 9.1 64 bit
Toshiba Satellite L455
Linksys WPSM54G ver 1.1
HP PSC2110

Not sure what else I should list.

View 4 Replies View Related

Ubuntu Networking :: Can't Connect To Wireless Router Linksys Wrh54g Ver 1.0?

Jul 1, 2010

i installed ubuntu 10.04 from internet.but i cant connect to my wireless router linksys wrh54g ver 1.0,but if i using Local area connection its working,however my wireless connection working in my other os win xp.

View 3 Replies View Related

Ubuntu Networking :: Linksys WUSB54G - Hook Up Through Wireless With Device

Dec 14, 2010

I have a Linksys Wireless-G USB Network Adapter, 2.4 GHz, 802.11g. It hooks up through USB plug, and when I originally plugged it in I got the message that ubuntu didn't support the drivers, but haven't seen it since. I'm hooked up to a LAN cable right now, and can't seem to figure out how to hook up through wireless with this device. Or I just don't know how. When I click on the network connections button on the top right corner (the two computers). I can see my Wired Internet, but no wireless. When I type lsusb in a terminal I get : (sorry I don't know how to do code blocks) So it is recognizing that it's there, but maybe I just don't know how to use it. Also, I'm running Ubuntu Release 10.04 (lucid).

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved