CentOS 5 Networking :: Setting Up The Linksys WMP45G Wireless Card?
Sep 11, 2010
I recently purchased the Linksys WMP45G wireless card for my desktop (as my router is too far for ethernet cable). I can't get it to work. The NetworkManager icon doesn't appear in the upper-right corner, despite being up-and-running. Here is some output:
[root@cwatson ~]$ uname -a
Linux cwatson.homeunix.net 2.6.18-194.11.1.el5.centos.plus #1 SMP Wed Aug 11 08:19:38 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
[root@cwatson ~]$ yum list installed "Network*"
[code]....
View 7 Replies
ADVERTISEMENT
Jun 18, 2009
I just installed Fedora again, after a long absence. I have been using XP. I am having issues setting up my wireless card Linksys WMP54G. For some reason the card has been recognized, and the interface is there. But I have tried every walk-trough known to Google, and it still won't work. I have been using the GUI tools, but they don't work. I have also been using the command line walk through, and they aren't working either. Does anyone know which files I need to set and what the process would be?
View 3 Replies
View Related
Aug 4, 2009
I have a Sprint U760 air card that apparently works under Linux. Sprint has a guide: "Wireless Mobile Broadband Setup Guide for Linux OS" that I am using to setup the air card. When I go through the procedure in the manual for "Setting Up PPP Using KPPP" the last task is to query the modem to see if Linux recognizes it. When I do the query I get a response "unable to open modem". I have tried going back through the PPP setup but still get the same response.
View 8 Replies
View Related
May 30, 2011
I have a Linksys WAG54G2 Router - this is set up and was working fine with Xp and my Apple I phone.I have just changed over from XP to Ubuntu, and am having difficulty in configuring wireless settings to accept UBUNTU.The hard wired Ethernet connection works fine.
View 2 Replies
View Related
Jul 10, 2011
I have installed Ubuntu 11.04 and for several days have tried many, many different ways of installing my Linksys WPC 11 wireless card into my IBM Thinkpad T30 laptop.
I have got the wireless working by installing Ubuntu 8 and then upgrading to the current version, and I would assume some drivers are currently installed.
As usual though, the signal drops out after only a few minutes and I have to keep re-booting the laptop to continue what I'm doing.
View 7 Replies
View Related
Mar 14, 2011
I am trying to set up the wireless with the latest version of Ubuntu. I can connect to the internet with the ethernet but wireless connections do not even show up. My wireless card is a Intel WiFi Link 1000 BGN and perhaps that is the problem. I am not sure if that will work. I am also using VMware and perhaps it just doesn't work with VMware.
When I type in iwlist scan it just comes up with: lo interface does not support scanning and eth0 interface does not support scanning. When I search for available drivers it says no proprietary drivers are in use on this system. Then it has VMware virtual ethernet driver and VMware virtual machine communication interface.
View 11 Replies
View Related
Mar 3, 2010
I just joined this forum in hope of fixing my linksys wireless card, here is my problem. I have a old Compaq presario 1710sb laptop with a p1 32mb ram and a 2GB hard drive. I installed a Debian Lenny command line only install, I installed ndiswrapper from a etch .deb file I found on the internet but I can't find out how to get it working. I tried how tos on other sites but they didn't work, I need to get that card working before I can install a GUI.
View 14 Replies
View Related
Jan 30, 2010
I read through the sticky of wireless card not working, and I followed through with the steps, with the exception of looking for firmware, because I'm certain it has it, being that the card works when I'm running Windows, and overall the system recognizes the device.
The only difference is, I notice that the activity light on the card itself does not turn on when running openSUSE. It recognizes the card, it even detects the network, but when I enter the WEP key and finish, it does nothing afterwards. Still no internet.
Card: Linksys WMP54G v4.1
View 5 Replies
View Related
Jun 19, 2010
I installed the Linksys WMP600N dual band card on my OpenSuSE 11.2 box using the SuSE supplied rt2860 driver. With the 2.4GHz channels this works out of the box. However, I am unable to access the 5GHz channels. iwlist says:
Leatherstocking:/home/bergue # iwlist wlan0 channel
wlan0 13 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Current Frequency:2.432 GHz (Channel 5)
Setting a 5GH channel with iwconfig doesn't work. iwpriv doesn't work either:
iwpriv wlan0 set WirelessMode=6
wlan0 no private ioctls.
Changing any settings in /etc/Wireless/RT2860STA/RT2860STA.dat doesn't seem to have any effect at all. The driver supplied by SuSE is of version 1.8. On the Ralink website a newer driver of version 2.3 is available; but so far I didn't manage to install it because I am not a C expert. However, the 5GHz channels should be accessible by the older 1.8 version driver. Somehow I suspect that in the SuSE distribution some dynamic parameters are hardcoded and therefore the whole thing fails.
View 3 Replies
View Related
Jun 7, 2011
Does Ubunto have a driver for the WPC100 Linksys Adapter wireless card?
View 2 Replies
View Related
Sep 19, 2010
I'm trying to follow the instructions here to get my dell wireless NIC working in CentOS. I've got to step 3 but when I run the make command.But it does exist, as a link pointing to ../../../usr/src/kernels/2.6.18-194.el5-i686.
View 14 Replies
View Related
Aug 21, 2010
Okay, a few days ago I got a small job setting up a router for a neighbour of mine. He wanted me to set up a wireless network for him. The router he bought is a Linksys Wireless N-Router E1000. I set it up the passwords and everything. Only to find out that I couldn't connect at all to it. The main computer with a direct ethernet connection to the router was the only one that had internet. Everytime I attempt to connect wirelessly with any device, it will take extremely long time to connect, to the point where I will just quit connecting.(Example: 15 minutes of waiting, when the laptop is right next to the router)
Any ideas about what I am doing wrong here? As far as I can think of it might just be a faulty router, because the router will not implement any changes(like setting a password) I set on it. Only wired connections seem to work. the router is called a linksys wirless N-router E1000.
View 2 Replies
View Related
Jan 25, 2010
I have recently purchased a Linksys WUSB100 for my Linux OS(8.04) and need assistance in setting it up. I am new to linux and would appreciate a step-by-step instruction on getting in working and need any neccessary drivers i may need. I appreciate any help i can receive as it will be a big plus. I really like using linux but just would like my wireless usb adapter to work.
View 1 Replies
View Related
Nov 26, 2009
First off I'd like to say if I hadn't put Fedora on my USB stick I'd never discovered that my old laptop had built in wifi, and it was just disabled in the BIOS. I was originally trying to get my Linksys WEC600n card to work. Once I turned on the internal wifi, and took out the linksys card, fedora picked it up right away. My problem is when I try going to websites they won't work, except for FedoraProject. (If I try to navigate to the FP forums it doesn't work either.) I'm not sure what would be the cause of this, so I have no idea where to start.
1. It had my wireless network in the list.
2. I put in my WEP key.
3. It appeared to connect fine.
4. Websites won't load.
5. ?
View 1 Replies
View Related
Apr 28, 2009
I have a desktop PC with CentOS 5 installed, and a wireless card that's working well via NetworkManager.
How would I configure the wireless card statically, e. g. by editing /etc/sysconfig/network-scripts/ifcfg-wlan0?
This would be something like :
DEVICE=wlan0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.1.252
NETMASK=255.255.255.0
ESSID=my_essid
CHANNEL=3
But I don't know how to define the WEP key here.
View 2 Replies
View Related
Mar 23, 2010
finding and installing a driver for the Linksys WUSB300N wireless adapter.
View 1 Replies
View Related
Aug 12, 2009
installing my wireless card Atheros AR9285.I have tried to get it working with both compat wireless - Ath9k driver but I dont know exactly how to do.I have also tried to get it to work with ndiswrapper, but it is really tricky because nothing is available in centos like precompiled ndiswrapper.I used to work with Arch Linux so everything in Centos is totally new to me and I don�t understand a thing:I need to get it to work as soon as possible.What I have read the should go to just "activate" the ath9k driver with my card and it would work,
View 3 Replies
View Related
Feb 16, 2010
I've search for info on configuring ndiswrapper for the BCM4318 Wireless card. All I've been able to find is information on Ubuntu and Debian, which don't seem to use the same methods for configuration. Has anyone configured ndiswrapper for this or any wireless card on CentOS 5? I've installed 5.4.
View 7 Replies
View Related
Sep 8, 2009
I just recently installed CentOS 5.3 and to make a long story short I found the entry for my wireless card under the network settings but when attempting to activate the card the system locks up. I have to reboot at that point as nothing responds (keyboard, mouse, etc..).
Running the command /sbin/lspci -v reveals the following about the wireless card:
01:00.0 Ethernet controller: Realtek Smeiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
View 3 Replies
View Related
Jan 5, 2010
I'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
View 3 Replies
View Related
Aug 12, 2009
I have a problem when a try start my wireless card broadcon 4303, i receive this message.
SIOCSIFFLAGS - no such directory
I use centos 5.2
kernel 2.6.18
View 5 Replies
View Related
Mar 25, 2010
My first Ubuntu/Mythbuntu install. Installed OS, plugged in linksys wireless G adapter. It finds the network but cannot connect. Discovered wireless priviledges while setting up admin/user accounts. Should be ready to go. or not, I'm thinking it needs a driver but
1) in linux? certainly not in Fedora.
2) If it can see the network it doesn't need a driver,
My settings are wrong or I'm missing something. SSID is set in settings. Do I need mac address and BSSID?
View 1 Replies
View Related
Jul 13, 2010
Previously I had my desktop hooked up to a nearby router via an ethernet cord with my parents' computer having a wireless usb adapter to connect (This thing: [uRL]). We just moved and our setup has reversed (router is near their computer, I am using the usb adapter). I just installed the latest Ubuntu and now I can't get the usb adapter to work. I'm very new to Linux and I have no idea what to do. I think this is the same usb adapter.
View 1 Replies
View Related
Nov 11, 2010
I have a linksys wireless-b wmp11 network card. Can anyone tell me how to get this up and running? Maverick is up to date as of yesterday and I have the cd that came with the card. I have no way to access the internet on the machine. I am typing this from my laptop.
View 2 Replies
View Related
May 23, 2010
I am having trouble setting up my pci wireless card. Bellow are some steps I have taken.
I followed this guide. I started out by installing wireless-tools.
Code:
aptitude install wireless-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
View 4 Replies
View Related
Jan 3, 2010
i cant connect to my wireless network... im using karmic. Ive searched and found quite a lot of threads but arent sure where to start. I have a Linksys wusb600n, and are trying to connect to my network. It detects the network fine but doesnt connect.
View 1 Replies
View Related
Apr 1, 2010
I've tried it using the Ubuntu 9.10 live CD (both 32-bit and 64-bit versions) and while the adapter can see wireless networks, it can't connect to them. It asks me for my WPA2 key, but after trying to connect for about 30 seconds it asks me for it again. I've read other threads about this issue but they were kind of confusing.
I just need to know whether the adapter will work and if so, how to get it to connect. I'm so sick of Windows and I'd love to switch to Linux, but I won't be able to if I can't get my adapter to work.
Edit: I just noticed the sticky about posting wireless tickets. I'm sorry, I don't have time to post it right now, but I will post all of that information when I get back.
View 9 Replies
View Related
Jul 15, 2010
I have a dual partition with xp pro, and Ubuntu 10.04. It really is amazing, and i plan on erasing everything and starting over new again, this time just ubuntu. with windows, i have a Linksys Compact Wireless G usb Network Adapter with speedbooster ver.2. it works in windows from the CD, but its for windows. ive tried ndiswrapper-utils, ndiswrapper-common and ndisgtk downloads and it opened the program, but sat with the spinning circle for 5 seconds then faded to grey. HOW do i get this to work? i'm in a hurry, as i am leaving for vacation in florida, and i have the only laptop in the house and we bring it every year. If there is something easy (or complicated but with step by step) that i could use to get the driver for my usb network thingy,
View 2 Replies
View Related
Nov 12, 2010
I've just installed Ubuntu 10.10 and everything seems to be working fine, but I can't seem to connect to my wireless network. I am able to see the wireless networks nearby, so I'm guessing that means the drivers are fine and the hardware is working. When I try to connect, I am seeing the wireless networks of my neighbors, but mine isn't showing. So I manually enter the information in and try to connect, but it doesn't seem to connect. I enter the WEP key and it attempts, then the WEP key screen pops up again, as if I entered the key incorrectly. I've tried many times and I'm 100% certain my key is correct. By the way, the chipset is: Ralink RT61
Which means it really should just work out of the box.
View 5 Replies
View Related
Jan 28, 2011
I am completely new to Linux and have just installed Xubuntu on an old HP machine. Until I buy a long enough ethernet cord to reach my router upstairs, I would like to try to make use of a Linksys wireless USB network adapter that I have (WUSB11 ver. 2.. I looked around online and I got pretty confused. I don't know where to start.
View 7 Replies
View Related
