Ubuntu Networking :: Unable To Use Cisco Linksys Wireless-G USB Adapter?
Jan 13, 2010
I'm unable to use Cisco Linksys Wireless-G USB adapter - Model No. WUSB54GC ver 3.
Ubuntu distribution : Hardy Heron (updated)
Desktop Environment : wmii
lsusb :
Code:
Bus 007 Device 006: ID 1737:0077
Bus 007 Device 003: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 007 Device 001: ID 1d6b:0002
Bus 006 Device 001: ID 1d6b:0002
[Code]....
Tried startup with device connected, no success.
Read some threads which generally correspond to version 2 of the device.
It probably uses Ralink chipset(cmiiw). I neither have Rt73 nor prism2_usb installed, confirmed by lsmod.
View 2 Replies
ADVERTISEMENT
Jul 13, 2010
Previously I had my desktop hooked up to a nearby router via an ethernet cord with my parents' computer having a wireless usb adapter to connect (This thing: [uRL]). We just moved and our setup has reversed (router is near their computer, I am using the usb adapter). I just installed the latest Ubuntu and now I can't get the usb adapter to work. I'm very new to Linux and I have no idea what to do. I think this is the same usb adapter.
View 1 Replies
View Related
Jan 28, 2011
I am completely new to Linux and have just installed Xubuntu on an old HP machine. Until I buy a long enough ethernet cord to reach my router upstairs, I would like to try to make use of a Linksys wireless USB network adapter that I have (WUSB11 ver. 2.. I looked around online and I got pretty confused. I don't know where to start.
View 7 Replies
View Related
Feb 16, 2011
I have a AE1000 wireless adapter and Ive been using it or about 4 months on windows xp. Yesterday I installed ubuntu 10.10 and it won't work It won't connect to the internet and won't even show signs that it is turned on.
View 5 Replies
View Related
Jul 8, 2011
Ok so I tried to follow the directions here: [URL] However, I couldn't find 2010_0915_RT3572_Linux_STA_v2.4.0.2.tar.bz2. Instead, the closest I could find was 2011_0407_RT3070_RT3370_RT5370_RT5372_Linux_STA_V2 .5.0.2_DPO.bz2, so I tried it. I edited config.mk and rtusb_dev_id.c as chili555 advised. I tried to edit linux_rt.h, however, the only file I saw was rt_linux.h. I edited it according to chili555's post, message #7. I went back to the root directory of the extracted .bz2 file and did
[Code]...
View 5 Replies
View Related
Jul 30, 2010
I'm not a new user to ubuntu but I'm stuck with a driver issue on a wireless adapter upgrade for ubuntu 10.04 lucid lynx. I'm running an acer aspire am1201-e1622a with amd athlon x2 64 bit processor, however i'm only running the 32 bit version of lucid lynx. The following are a few outputs of some commands that might assist in finding the proper driver. Before though i will tell you what i have done.
I have installed a few different drivers from windows wireless driver installer such as the xp and vista 32 and 64 bit versions with no success in the computer actually recognizing that i have a wireless adapter installed. The windows wireless driver installer said that hardware was present but i was unable to scan for networks or even see that i had a choice to do that. This meaning that it didn't show i had wireless capabilities in my network manager. i tested this with gnome network manager which is the default manager for 10.04 and also with wicd with no success.
Following these tests i attempted to install a driver from source following the instructions on another forum. This allowed me to manually turn on the wireless adapter but i was still unable to find any networks. This meaning that wicd was able to see that i had a wireless adapter installed but it for some reason was unable to see any wireless networks around. I'm 100% sure my router is in range and that it is configured correctly. I have 5 other computers connect to this router along with some of them being ubuntu.
[Code]....
View 2 Replies
View Related
Mar 31, 2010
I don't why this is but we have WiFi working on our computer. The only problem is that when I search for LinkSys folder or Cisco folder nothing shows up. Is there something I need to do for that? I have tried to search for it in the folders themselves by doing a search but nothing comes up.
View 7 Replies
View Related
Jun 2, 2011
I can't install/configure this router. I have my PC connected to it via ethernet cable, and Ubuntu sees the connection, but I can't connect to the internet and I can't access 192.168.1.1. I've searched the forum, and I know there are a lot of threads on this, but neither were helpful and since the CD has only win drivers, I couldn't install anything.
I can access the internet through a phone using WiFi though, so theoretically everything is working, I just can't use it with the PC.
View 5 Replies
View Related
May 16, 2011
Does anyone have a driver for Cisco Aironet PCMCIA AIR-CB21AG-A-K9 wireless adapter that works with Ubuntu 11.04? Ubuntu does not see the card when plugged into the PCMCIA slot. I thought that if Ubuntu had a driver installed, it would pick up the device.
View 4 Replies
View Related
Apr 27, 2009
I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
View 9 Replies
View Related
Nov 11, 2010
I actually wasn't even trying to install the adapter which is the funny thing, I just finally got around to installing mandriva 2010 on my desktop and happened to have the adapter already hooked up to a usb port for my windows installation. When I got done with the installation to my amazement it got recognized and I didn't have to do a thing!
I looked into installing the adapter on my laptop which already had mandriva 2010 on it and gave up cause I didn't find any post's here that addressed the issue very well. Just thought I would pass it along for anyone who want's to try this on there computer.
View 3 Replies
View Related
Sep 7, 2010
Looking for driver for Linksys Wireless Notebook adapter WPC55AG
View 1 Replies
View Related
Aug 9, 2011
I have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.
lsusb
Code:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter
dmesg
[Code]....
View 9 Replies
View Related
Feb 11, 2010
I recently tried to install Crunchbang on my IBM Thinkpad T20 laptop. Everything went OK as far as I can tell (I still have to adjust acpi and display settings), but I cannot get my laptop to connect to the internet via wireless (wired connection works fine). I've done a good deal of searching online, and I realize that my wireless adapter (wpc54gs, bcm4318 chipset) is problematic in linux, and that b43-fwcutter is typically required. I did install b43-fwcutter, and it seemed to install OK, but nothing subsequently happened when I opened networkmanager. I'm not sure at this point if my problem is that I don't know how to configure any wireless adapter in crunchbang, or if it is that my particular adapter is not being recognized.
View 4 Replies
View Related
Jun 7, 2011
Does Ubunto have a driver for the WPC100 Linksys Adapter wireless card?
View 2 Replies
View Related
Mar 23, 2010
finding and installing a driver for the Linksys WUSB300N wireless adapter.
View 1 Replies
View Related
Aug 9, 2010
Im currently unable to install a wireless USB network adapter because it requires an installation which can only be done with a cd and im not sure how to install the software to run the wireless adapter.
View 1 Replies
View Related
Mar 9, 2011
I have just installed Ubuntu 10.10. It is great and all but I am not able to get my wireless adapter working...it is a cheapo one and I have found different tutorials around the internet trying to get it to work...to no avail!
View 1 Replies
View Related
Feb 3, 2011
i am using fedora (2.6.35.6-45.fc14.i686), i am not able to configure the usb based wireless adapter, its DWA 125(Dlink) uses ra chipset.
lsusb
here is the output
Bus 001 Device 002: ID 07d1:3c0d D-Link System DWA-125 Wireless N 150 Adapter(rev.A1) [Ralink RT2870]
i have got the driver loaded with the help of modprobe, still unable able to make it right. when i use system-config-network - wireless - no sign of RT2870.
View 2 Replies
View Related
Jan 15, 2011
I can't post messages, I think something is wring with my internet.Anyway, I'm gonna copy paste what I've been trying to say...I just bought the TP-LINK Model No. TL-WN821N. It's an atheros. And I was wondering where can I find the drivers for Linux. It only includes drivers for Windows.
I don't have much experience with networks,I found this website,
http:[url]......
I got stuck in the patch section, I don't know what they are trying to say. They are using
diff -urp compat-wireless-2009-02-22_AR9170_230209/drivers/net/b44.c compat-wireless-2009-02-22_AR9170_230209/drivers/net/b44.c
They are comparing the same file, there is some code they are showing but I don't know what they want me to do.
View 9 Replies
View Related
Jun 5, 2010
I'm trying to get a Linksys Wireless USB Network Adapter WUSB54G to work on Ubuntu 10.
View 4 Replies
View Related
Feb 11, 2010
Put all Cisco drivers and firmware for wireless in a new ubuntu 10.04. I love ubuntu and I have a big problem with a mini pci wireless Cisco Airo MPI 350...
View 9 Replies
View Related
Mar 25, 2010
My first Ubuntu/Mythbuntu install. Installed OS, plugged in linksys wireless G adapter. It finds the network but cannot connect. Discovered wireless priviledges while setting up admin/user accounts. Should be ready to go. or not, I'm thinking it needs a driver but
1) in linux? certainly not in Fedora.
2) If it can see the network it doesn't need a driver,
My settings are wrong or I'm missing something. SSID is set in settings. Do I need mac address and BSSID?
View 1 Replies
View Related
Nov 11, 2010
I have a linksys wireless-b wmp11 network card. Can anyone tell me how to get this up and running? Maverick is up to date as of yesterday and I have the cd that came with the card. I have no way to access the internet on the machine. I am typing this from my laptop.
View 2 Replies
View Related
Jan 3, 2010
i cant connect to my wireless network... im using karmic. Ive searched and found quite a lot of threads but arent sure where to start. I have a Linksys wusb600n, and are trying to connect to my network. It detects the network fine but doesnt connect.
View 1 Replies
View Related
Apr 1, 2010
I've tried it using the Ubuntu 9.10 live CD (both 32-bit and 64-bit versions) and while the adapter can see wireless networks, it can't connect to them. It asks me for my WPA2 key, but after trying to connect for about 30 seconds it asks me for it again. I've read other threads about this issue but they were kind of confusing.
I just need to know whether the adapter will work and if so, how to get it to connect. I'm so sick of Windows and I'd love to switch to Linux, but I won't be able to if I can't get my adapter to work.
Edit: I just noticed the sticky about posting wireless tickets. I'm sorry, I don't have time to post it right now, but I will post all of that information when I get back.
View 9 Replies
View Related
Jul 15, 2010
I have a dual partition with xp pro, and Ubuntu 10.04. It really is amazing, and i plan on erasing everything and starting over new again, this time just ubuntu. with windows, i have a Linksys Compact Wireless G usb Network Adapter with speedbooster ver.2. it works in windows from the CD, but its for windows. ive tried ndiswrapper-utils, ndiswrapper-common and ndisgtk downloads and it opened the program, but sat with the spinning circle for 5 seconds then faded to grey. HOW do i get this to work? i'm in a hurry, as i am leaving for vacation in florida, and i have the only laptop in the house and we bring it every year. If there is something easy (or complicated but with step by step) that i could use to get the driver for my usb network thingy,
View 2 Replies
View Related
Nov 12, 2010
I've just installed Ubuntu 10.10 and everything seems to be working fine, but I can't seem to connect to my wireless network. I am able to see the wireless networks nearby, so I'm guessing that means the drivers are fine and the hardware is working. When I try to connect, I am seeing the wireless networks of my neighbors, but mine isn't showing. So I manually enter the information in and try to connect, but it doesn't seem to connect. I enter the WEP key and it attempts, then the WEP key screen pops up again, as if I entered the key incorrectly. I've tried many times and I'm 100% certain my key is correct. By the way, the chipset is: Ralink RT61
Which means it really should just work out of the box.
View 5 Replies
View Related
Jun 12, 2011
I have an Acer Aspire 1 Netbook - this is running UBUNTU- When I try to connect to my Linksys Router in wireless mode it asks for password - but doesnt accept. I can see the Linksys in network manager plus several other networks in the vicinity. My other wireless devices all connect O.K. to the Linksys, and accept my password.. I can hard wire by ethernet to the netbook. Just wireless is the problem
View 3 Replies
View Related
Jul 10, 2011
I have installed Ubuntu 11.04 and for several days have tried many, many different ways of installing my Linksys WPC 11 wireless card into my IBM Thinkpad T30 laptop.
I have got the wireless working by installing Ubuntu 8 and then upgrading to the current version, and I would assume some drivers are currently installed.
As usual though, the signal drops out after only a few minutes and I have to keep re-booting the laptop to continue what I'm doing.
View 7 Replies
View Related
