Ubuntu Networking :: Hardy Heron - Usb Wlan Connection Came And Went?
Jan 3, 2011
After days of trying to get a TL-WN321G usb driver to install in Hardy Heron, it finally arrived in the proper place. In trying to then set it up, I got as far as enabling roaming mode, and the icon showed that the system had made a connection to my Belkin-ASDL-G router. I launched Firefox, which momentarily showed Google home page(where I'd been last when using a wired lan), then it changed to "Server not found".
I've tried rebooting several times, but it remains the same. Each time the dongle led lights up, the icon shows it trying to make a connection to the correct network, but it fails to do so.
On another pc on this network, I looked in the router settings for DHCP client list, and this client has now vanished from the list where it had been showing before. Possible complications may come from a setting in the client list that still shows up with the same host name, generated by an earlier attempt with a different usb dongle.
So two questions - do I need to find out how to remove the old client first, if so how ? And secondly, does anyone recognize the symptoms and can offer a solution ?
View 6 Replies
ADVERTISEMENT
Apr 30, 2010
using Hardy Heron on a old Thinkpad T41.This is a fresh install system and I noticed it kept dropping wireless connection. After google around, seems like this is a common problem? Then I switched to wired network, and turned out the same thing happens again. Looks like doesn't matter wired or wireless, it kept dropping itself from time to time.
fter checking syslog, I found something interesting...it kept complain eth0 is invalid, then it said it found a better connection?I found that extremely weird..
Code:
Apr 30 06:24:32 support kernel: [ 961.236895] e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang
[code]...
View 1 Replies
View Related
Jul 3, 2010
I am having trouble setting up FamilyShield on an Ubuntu 8.04 system. The setup instructions on this (opendns.com) site are for newer versions of Ubuntu. Network Manager settings are different in 8.04 and don't correspond to the instructions. However, given the age of this computer, it cannot run a newer version of Ubuntu, and 8.04 is an LTS supported until 2011,
Complicating matters is I am living as a guest, so do not have the option of setting FamilyShield on the router. It must be done on my computer.
Here's what I've tried:
System->Administration->Network
go to DNS Tab and add the FamilyShield DNS numbers. BTW, there are two DNS numbers from the internet owner's ISP (Roadrunner) automatically in here already, along with "socal.rr.com" in the Search Domains field. If I try to delete them, they reappear when I reboot. If I add FamilyShield DNS numbers here, either along with, or in place of the ones that automatically appear here, they do not take, and on next boot FamilyShield DNS numbers are gone, but "socal.rr.com" DNS and search domains reappear.
I've also tried:
Code:
sudo gedit /etc/dhcp3/dhclient.com
and added following line at the end:
Code:
prepend domain-name-servers 208.67.222.123,208.67.220.123
When I reboot the system, I'm still using the assigned DNS numbers from "socal.rr.com".
I was able to try a newer version of Ubuntu (on a different machine) on this network, and it worked fine with the setup instructions. So this appears to be a problem specific to how Ubuntu version 8.04 handles DNS number changes.
View 1 Replies
View Related
Jul 10, 2010
I can't install a PCI Wireless Adapter TRENDnet model TEW-623PI in my Hardy Heron 8.04 LTS.
View 1 Replies
View Related
Apr 1, 2010
I'm Just a newbie here my OS is ubuntu 8.04 LTS I tried to install chrome9 driver chrome9.83-242-u804 on my laptop after i have installed that my laptop is umm. like this picture..
but when i use external monitor the external monitor is fine but my laptop still no change what does i should do?
View 3 Replies
View Related
Sep 16, 2010
I want to upgrade from Ubuntu 7.10 - the Gutsy Gibbon to 8.04 hardy heron. Will I have any problems after installation using the update manager. Will I lose any programs or files (mp3's movies) on my computer after installation? Are there any serious bugs that will my machine useless afterward?
View 9 Replies
View Related
May 24, 2010
I had an install of 8.04 running Tomcat 6 on port 80. I did a marathon upgrade session to 8.10, then 9.04, then 9.10, and finally to 10.04. My website no longer loads (from Internet, LAN, or local), and a port scan shows port 80 is not open. I have removed and reinstalled Tomcat 6, to no avail.
Could it be that the 10.04 upgrade saw an existing Desktop install and locked this port down? The /etc/Tomcat6/server.xml shows it is using port 80, so that much appears to be correctly configured. Before this would give me the ROOT webapp. Anything else I can check? Does this sound like a Tomcat problem or something Ubuntu is doing?
As a side note, I have installed the Tomcat 6 Docs and Manager apps as well. These also worked before the upgrades, and do not now.
View 2 Replies
View Related
Sep 16, 2010
Given that 10.04 fails to work on my old pc, where do i find installs of hardy heron (which i know works) or karmic koala (which may work).
View 3 Replies
View Related
Apr 20, 2010
I am having trouble with my new Huawei USB modem. It gets detected and lsusb shows me the vendor id and product id as 12d1 : 140b Huawei Technologies Pvt Ltd but the device does not create any entry in /dev/ttyUSB* am i missing something?
View 2 Replies
View Related
Jun 15, 2010
Currently, my partitions are set up as such:
83GB ext3 free space
~10GB ntfs HP/Vista Recovery Partition
~93GB Ubuntu (Hardy Heron)
I tried to just have two partitions (recovery and ubuntu), but because of the different file systems, and the placement of the hp recovery partition, it has to be right in the middle. This is basically what I want to do:
1) Reinstall Hardy Heron on a new (smaller) partition from the free space partition.
2) Once it's working properly, format the rest of the hard drive (getting rid of the recovery partition) and create a single ext3 partition.
3) Install another distro on this new partition.
Does anyone foresee any complications with all this slicing and dicing of my hard drive for which I should/could prepare?
View 9 Replies
View Related
Aug 22, 2009
I recently got a laptop computer and installed 64 bit fedora 11. I can make wireless connections fine but for my ISP I require a dial in using an username and password. On my desktop this is easy I just make a DSL connection under network manager and select eth0 my wired network card as the hardware and away I go. But now I can't select the wireless card as my hardware connection so my DSL keeps on trying to connect through eth0 which is obviously not plugged in. How do I go about making this connection? I have searched google and other people have this problem but I haven't seen any replies. I have tried using pppoe-setup and manually setting the hardware as wlan0 but this doesn't seem to work as under network manager it just defaults back to eth0.
View 7 Replies
View Related
Jan 10, 2011
I installed Fedora 14 yesterday via the installation DVD with 3,3 GB. Everything worked fine and when I connected to my wlan and entered the WEP key I got access to the internet. But after about 5 minutes, to connection just got cut and I was again asked for the WEP passkey. But when I entered it this time, the connection failed and I was just asked again (with the same key entered, it even got it saved from last time). As you can think, this is quite annoying, since the time I have internet is not even enough to get some updates done.
Ah, and by the way: The time I have internet it just is unbelievably slow. On my Windows partation, I don't have this problem. I do have a small hint what might be the problem: When I was using Ubuntu, I always had a similar problem, but it did not even connect to my wlan once. The solution was to blacklist some driver, but since I don't know if this might be the problem on Fedora too and if the drivers are the same as on Ubuntu and since I really have no idea about the syntax of the terminal here, I was not daring to try this out.
View 3 Replies
View Related
Apr 17, 2011
I have a problem with my wlan connection. it works for few seconds, then stops for few seconds and then starts again (without interaction from my side). I run Ubuntu 10.4 Lucid. The issue started few days ago. Using ethernet, there is no problem. The problem does not exist with other computers i have, there wifi and internet work continuously and flawless. I ping my wlan router. one sees that connection to the wlan router starts and stops every few seconds... (of course, internet connection then behaves analogous)
Quote:
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.30 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=1.21 ms
[code]....
View 3 Replies
View Related
May 12, 2011
I'm using the following in a script to connect to my house's wi-fi - it works perfectly for me - simple, and with a static IP:
Code:
modprobe zd1211rw #load the module needed by my wireless LAN adapter
ifconfig wlan0 up
iwconfig wlan0 essid my_network_name_at_home
ifconfig wlan0 10.0.0.8 netmask 255.255.255.0
route add default gw 10.0.0.2 wlan0
iwconfig wlan0 key key_comes_here
However, if I take my machine to the office, we've got DHCP assigned dynamic IPs. How can I modify the above script to NOT do
Code:
ifconfig wlan0 10.0.0.8 netmask 255.255.255.0
route add default gw 10.0.0.2 wlan0
but instead get them from the DHCP service running at work on the W-LAN?
View 2 Replies
View Related
Jun 6, 2010
I dual boot windows xp and ubuntu 10.04 LTS and the wireless card works perfectly fine in xp so I know its not a hardware/network issue. In ubuntu, it detects wireless networks, will connect to network and work for about 20 seconds.
[Code]....
and it continues on after this alternating between a normal 20ms and high ping over 200ms. The connection refuses to load anything off the internet/local network.
View 5 Replies
View Related
Apr 17, 2010
I did an upgrade over the internet and on rebooting after it had completed there was no internet connection. I wired in an ethernet cable and although I can access the router and ping another machine on the network, there is no internet connection.
View 7 Replies
View Related
Jan 5, 2010
I've had issues with the later versions of Ubuntu, so in an effort to road-test Firefox 3.5 on Hardy I'd like to change my Karmic/Hardy dual boot to a Hardy/Hardy dual boot, and follow the instructions in [URL] to put the Mozilla build of 3.5 on the new installation.
I can't see any reason why a Hardy/Hardy dual-boot shouldn't work, but does anyone know of any issues with this I might not be aware of?
View 9 Replies
View Related
Dec 20, 2009
I created a wireless ad hoc network using network manager. That was simple. I have friend who doesn't have a wireless card, and still would like to join the LAN. It would be nice if he could have a different IP address Is this possible?
View 2 Replies
View Related
Jun 23, 2011
i have debian squeeze installed on my lenovo t61 notebook with intel wireless 3945 firmware.
i've installed the firmware-iwlwifi package but cannot get any wireless connection.
i'm using the fluxbox dekstop with wicd network manager.
i've searched around on the debian user forum archives and the internet but have yet to find a solution for this. it seems most people have just installed the firmware-iwlwifi package and then wlan was working.
i had ubuntu installed on this machine before with wlan running, so i know that there is nothing wrong with my hardware.
View 14 Replies
View Related
Apr 15, 2011
I installed ubuntu 10.10 and everything worked fine for two days (and I fell in love with linux) but now I can not connect to a wireless connection. Did I mention I am new to linux and have been working on this problem for a couple of days. My wireless card is 1395 WLAN Mini-Card I think I have the b43 driver installed. I have reinstalled the driver and linux but to no effect.
View 14 Replies
View Related
May 27, 2010
I am running Ubuntu 8.04 (Hardy Heron), Kernel 2.6.24-24. Because everything is working fine, I would be very reluctant to upgrade to 8.10 or later. However I now have a need to use a Mobile Broadband USB connection to the Internet. I understand that this requires Network Manager 7.something or later.
I got the network-manager (0.8-1) binary from debian. Anyone got any experience of whether I should be able to install it succesfully? I thought I would ask before wrecking my system. (Synaptic seems to only allow me version 0.6.6)
View 3 Replies
View Related
Nov 16, 2010
My network doesn't work on boot. I have to ifdown then ifup before it starts working again.
View 6 Replies
View Related
Feb 9, 2010
I configured my Xubuntu laptop to work with my Netgear Wireless router to connect to the Internet. I was able to connect, and downloaded Hardy updates of 184 MB. After installation of the updates, the system prompted me to restart. The Wireless network is not working since then. Tried reconfiguring, but to no avail. The proprietary drivers for my wireless network card have been downloaded and installed... remember, it worked well enough download the updates! Posting this from my Windows partition using the same wireless network A previous thread [URL]...k+Hardy+update) with the same issue seems to have hit a roadblock...
View 1 Replies
View Related
Dec 17, 2010
I have been using Hardy for about 3yrs now and using dialup to connect to the internet. I have a 64bit ASUS with a nVidia ethernet interface........I have just recently switched to cable broadband with a wired connection direct to the eth0 port. I have another computer running puppy linux in which the broadband works. hence this is how I am typing this now. I have connected my ubuntu machine to the cable and the network admin shows a wired connection but will not let me browse on the net with any browser. Not really sure how I got puppy to find it, but it did.
I have used the network manager on both machines with one connecting and the other not. I know there a newer ubuntu's out but I really do like Hardy and want to keep it, but without internet connection other than dialup it seems a bit lame. I am not above using command line options as I use wodim and wget all the time, so my question is.
View 1 Replies
View Related
Jan 24, 2011
I am running hardy on my laptop and was thinking its time I upgraded. One thing that's been holding me back is I have a number of wifi keys stored in there somewhere and can't remember what they were exactly. Are they exportable?
View 3 Replies
View Related
Nov 27, 2009
There is no wlan0 interface when trying to run FRITZ!WLAN USB Stick N 2.4 on OpenSuSE 11.2, though it works fine on Fedora 11 and Mandriva Spring 2009.1. All 64bit. Contrary to Fedora and Mandriva, there is no need to compile the compat-wireless module ar9170usb for OpenSuSE 11.2 because the kernel is very recent and includes this driver. Kernel: 2.6.31.5-0.1-desktop The /var/log/messages gives this after I put the stick in the PC. At first it is seen as a mass storage device:
Nov 27 22:00:24 linux-3mwa kernel: [ 73.420755] usb 1-5.1: new high speed USB device using ehci_hcd and address 4
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540834] usb 1-5.1: New USB device found, idVendor=057c, idProduct=84ff
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540841] usb 1-5.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540847] usb 1-5.1: Product: FRITZ!WLAN USB Stick N 2.4
[Code]....
View 5 Replies
View Related
May 9, 2010
I've already got the b43-fwcutter package and a driver called 'b43' appears in System > Administration > Hardware Drivers but it does not seem to enable. Another, Broadcom STA wireless driver, does enable, but I'm not picking up the wireless signal.
Code:
$lspci 05:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)
08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Code:
$ sudo lshw -C network
SCSI
[Code]...
View 5 Replies
View Related
May 16, 2010
I have a Dell Latitude C400 laptop running Xubuntu Hardy. I am a newbie and am trying to install a PCMCIA wireless card. The card is a TRENDnet model # TEW-421PC/A. I am using XFCE.
View 4 Replies
View Related
Feb 6, 2010
At my workplace the wireless connection is open but once you connect you first need to authenticate on your browser to be able to use the internet.On Windows as soon as I open whatever page I get the login request.On Linux I open firefox but nothing happens, just get the usual error page like if I had no connection. The IP's I get as well as DNS seem ok, I even tryed to match them up with windows.I tried a lot but can't get to the login page.
View 3 Replies
View Related
May 23, 2010
specific Ubuntu supported WLAN PCI-cards? This link shows a list of supported PCI-cards, but which is best: [URL] And the installation needs to be easy! I�ve tried installing these PCI-cards in my computer, useing Linux drivers, NdisWrapper, etc. Unforutately without any success:
- DWL-G510, Ralink Chipset, Ralink RT2561/RT61
- Realtek Semiconductor, RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller
View 1 Replies
View Related
