Networking :: Get And Use DHCP Offers To Config The Wlan Connection?
May 12, 2011
I'm using the following in a script to connect to my house's wi-fi - it works perfectly for me - simple, and with a static IP:
Code:
modprobe zd1211rw #load the module needed by my wireless LAN adapter
ifconfig wlan0 up
iwconfig wlan0 essid my_network_name_at_home
ifconfig wlan0 10.0.0.8 netmask 255.255.255.0
route add default gw 10.0.0.2 wlan0
iwconfig wlan0 key key_comes_here
However, if I take my machine to the office, we've got DHCP assigned dynamic IPs. How can I modify the above script to NOT do
Code:
ifconfig wlan0 10.0.0.8 netmask 255.255.255.0
route add default gw 10.0.0.2 wlan0
but instead get them from the DHCP service running at work on the W-LAN?
View 2 Replies
ADVERTISEMENT
Jul 5, 2011
I used to connect to the internet via a Linksys router using the following terminal commands (Network Manager has never worked for me on any Ubuntu install):
Code:
sudo ifconfig wlan0 down
sudo dhclient -r wlan0
sudo ifconfig wlan0 up
[code]....
However, I recently changed the old modem + router for a new wireless modem (a Thomson TG585v8 ). Now, the result of that last command is this:
Code:
amosupremo@amosupremo:~$ sudo dhclient wlan0
Internet Systems Consortium DHCP Client V3.1.3
[code]....
No working leases in persistent database-sleeping. I've tried to connect in Natty(both Ubuntu and Kubuntu) and it's not working either.I also purged Network Manager and installed wicd and I managed to get an intermittent, slow connection.
1 ) Machine Brand and Model (PC/Laptop): No brand. I built it with the following specs:
AMD Athlon II X4 2.6GHz
2 HD: 100GB Sata (Ubuntu and XP64 install) / 80GB IDE (XP)
4GB RAM
Gigabyte Motherboard
2 ) Wireless Brand, Model and Wireless Chipset:
Code:
amosupremo@amosupremo:~$ lsusb
Bus 002 Device 005: ID 0ace:1201 ZyDAS 802.11b
Bus 002 Device 004: ID 049f:000e Compaq Computer Corp. Internet Keyboard
[code]....
3 ) check interface:
Code:
amosupremo@amosupremo:~$ ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:02:72:04:d0:04
[code]...
I am also attaching the wicd log. It contains a session where I got the intermittent connection. I stopped that connection and restarted it (with the same results) two times.
View 9 Replies
View Related
Jun 25, 2010
I have configured dhcp3-server on my debian box and I'm wanting to offer dhcp on one of the vlan interfaces. The dhcp is functioning but when I test applying it to a different vlan, the original PC can still get an IP. For example: eth1 has vlan100 and vlan200. Our managed switch has the ports configured such the pc1 is on vlan100 and pc2 is on vlan2. This works fine and I can inter-route between vlans with static IPs. Our dhcp config is currently set as:
ping-check true;
ddns-update-style none;
default-lease-time 21600;
max-lease-time 86400;
INTERFACES="vlan100";
authoritative;
[code]....
View 2 Replies
View Related
Mar 10, 2009
i want to resolve the above error. I'm using systemimager to autoinstall system images on pc's connected in lan. while doing this i got the error No DHCPOFFERS received. Also at the time of booting my pc it shows the message No dhcp and/or proxyDHCP offers recieved. But i've started the dhcpd deamon on my pc. Also the systemimager rsync deamon is running. The two pc's are also connected in lan properly.
Still while autoinstalling the image on client it fails showing the error message... No DHCPOFFERS recieved. what do i do in order to make my autoinstall work properly? How do i come to know whether the dhcp server is running or not? What will be the exact problem in autoinstalling?
View 1 Replies
View Related
Aug 18, 2010
I am trying to connect to a WEP encrypted WLAN without using the DHCP server of the AP. (=giving myself a static IP)
So far i have tried:
Code:
But i cant even ping 192.168.1.1 (Network unreachable error). Is it possible that Ubuntu tries to use eth0 (which was connected to a similar /16 before) to ping 192.168.1.1 or is there somethign wrong with my commands?
Also will an AP allow access to the network although i don't have an IP from its DHCP server?
View 3 Replies
View Related
Jun 21, 2010
I have a network with multiple subnets from 10.12.056.0 to 10.12.060.0 using net-mask 255.255.248.0 and one gateway 10.12.056.1. I want to setup a dhcp server and wonder how should I config it? All the hosts in the network using the same net-mask and gateway.
View 4 Replies
View Related
Apr 18, 2011
I have a simple system at home where a DSL router is used as a basic dhcp server with one port forward for ssh to a server. I need to allow my daughters, ages 14,12 and 10, to access the net and also email but I want to have complete control and logging. What I'm looking to do is set up the Ubuntu file server I already have on the network to act as a gateway and also add content management and logging as step one.
I also want to add an email server so that all the email comes into the Ubuntu server and then is allowed to be accessed by outlook on their machines after spam/content scanning for valid emails as step two. My question is what, if any, additional software do I need and what options do I have. I've played with dhcp servers at work but never got much beyond ip assignment and network booting so I'm unfamiliar with what is needed for content management and such. As to the email server I've never even played with this at all so I'm completely in the dark as to what I should be looking at to start with. I'm looking for directions, RTFM is fine but right now I'm not sure even WHAT manual/manuals I should be reading.
View 1 Replies
View Related
Jun 27, 2011
I have an ubuntu 11,04 samba domain server, I want to also configure this machine to work as a dhcp server, however this have give me some issues with te windows 7 workstations, my guest is that it have something to do with the iptables because those station do join the samba domain went both server and workstation are conected to a router.
This is the script I use at boot
Code:
#FOR SHARED INTERNET
/sbin/iptables -P FORWARD ACCEPT
/sbin/iptables --table nat -A POSTROUTING -o eth2 -j MASQUERADE
[code]....
I haven't test it with windows xp station but I have use the same code in the past with no problems, and since this is my first time joining windows 7 station i belive there must be some other port that need fowarding.
View 3 Replies
View Related
Aug 22, 2009
I recently got a laptop computer and installed 64 bit fedora 11. I can make wireless connections fine but for my ISP I require a dial in using an username and password. On my desktop this is easy I just make a DSL connection under network manager and select eth0 my wired network card as the hardware and away I go. But now I can't select the wireless card as my hardware connection so my DSL keeps on trying to connect through eth0 which is obviously not plugged in. How do I go about making this connection? I have searched google and other people have this problem but I haven't seen any replies. I have tried using pppoe-setup and manually setting the hardware as wlan0 but this doesn't seem to work as under network manager it just defaults back to eth0.
View 7 Replies
View Related
Jan 10, 2011
I installed Fedora 14 yesterday via the installation DVD with 3,3 GB. Everything worked fine and when I connected to my wlan and entered the WEP key I got access to the internet. But after about 5 minutes, to connection just got cut and I was again asked for the WEP passkey. But when I entered it this time, the connection failed and I was just asked again (with the same key entered, it even got it saved from last time). As you can think, this is quite annoying, since the time I have internet is not even enough to get some updates done.
Ah, and by the way: The time I have internet it just is unbelievably slow. On my Windows partation, I don't have this problem. I do have a small hint what might be the problem: When I was using Ubuntu, I always had a similar problem, but it did not even connect to my wlan once. The solution was to blacklist some driver, but since I don't know if this might be the problem on Fedora too and if the drivers are the same as on Ubuntu and since I really have no idea about the syntax of the terminal here, I was not daring to try this out.
View 3 Replies
View Related
Jan 3, 2011
After days of trying to get a TL-WN321G usb driver to install in Hardy Heron, it finally arrived in the proper place. In trying to then set it up, I got as far as enabling roaming mode, and the icon showed that the system had made a connection to my Belkin-ASDL-G router. I launched Firefox, which momentarily showed Google home page(where I'd been last when using a wired lan), then it changed to "Server not found".
I've tried rebooting several times, but it remains the same. Each time the dongle led lights up, the icon shows it trying to make a connection to the correct network, but it fails to do so.
On another pc on this network, I looked in the router settings for DHCP client list, and this client has now vanished from the list where it had been showing before. Possible complications may come from a setting in the client list that still shows up with the same host name, generated by an earlier attempt with a different usb dongle.
So two questions - do I need to find out how to remove the old client first, if so how ? And secondly, does anyone recognize the symptoms and can offer a solution ?
View 6 Replies
View Related
Apr 17, 2011
I have a problem with my wlan connection. it works for few seconds, then stops for few seconds and then starts again (without interaction from my side). I run Ubuntu 10.4 Lucid. The issue started few days ago. Using ethernet, there is no problem. The problem does not exist with other computers i have, there wifi and internet work continuously and flawless. I ping my wlan router. one sees that connection to the wlan router starts and stops every few seconds... (of course, internet connection then behaves analogous)
Quote:
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.30 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=1.21 ms
[code]....
View 3 Replies
View Related
Jun 6, 2010
I dual boot windows xp and ubuntu 10.04 LTS and the wireless card works perfectly fine in xp so I know its not a hardware/network issue. In ubuntu, it detects wireless networks, will connect to network and work for about 20 seconds.
[Code]....
and it continues on after this alternating between a normal 20ms and high ping over 200ms. The connection refuses to load anything off the internet/local network.
View 5 Replies
View Related
Aug 20, 2010
I had my laptop at work for a few days and when I brought it home I couldn't open up web pages any more. I have a DHCP connection (shaw cable).When I plug the chord from the modem into my windows machine I can open up web pages. When I plug it into my ubuntu laptop I can't open up web pages.
I have tried unplugging the modem and restaring my computer.I think that there is some sort of connection because when I open up Network tools it shows that I am continually receiving packets. As soon as I unplug the ethernet wire I stop receiving packets. For some reason I just can't open web pages.I also tryed typing 'sudo ifconfig' and 'sudo dhclient' in a terminal. I don't fully understand what this means but I saw it in another forum.
View 4 Replies
View Related
Aug 10, 2011
After ubuntu did some updates, I restarted and then no wired connection was detected.The following may partly clarify the problem:
sudo dmesg | grep eth
(I dont get anything for this)
ifconfig
[code]....
View 5 Replies
View Related
Feb 16, 2010
I have router and wireless card Linksys. Driver are installed correctly for wireless card.
Using WifiRadar I can see the access point is detected.
DHCP woks perfectly for wired lan.
However when I try to connect to the detected access point the ip addres is never retrieved and the connection never established.
I tried most of he basic instructions posted on ubuntu forums, but the problem doesn't seem to be with basic configuration: driver, essid, wep key, etc..
The problem seems to be with DHCP not able to retrieve an IP address from the DHCP server of the router. Of course the router works file with other laptops (windows based) that have wireless card.
I also tried the Network Connections setup part of ubuntu. That one shows the access point by its essid name in the list of wireless network, but when I try to connect it takes sometime and eventually asks for the wep key, which I provide and then it times out and keep asking it. The same wep key works for other pcs.
Can't figure it out. I am using ubuntu 9.10.
Some more details are the following:
1) Here the output from the log file: /var/log/wifi-radar.log
Of course it is set ... and dhcp client works for wired lan anyway.
2) diego@mysuperlaptop:/var/run$ sudo iwlist wlan0 scan [sudo] password for diego:
I tried everything I could think about in the UI windows setting (WifiRadar and Wireless Network Connections) a well in the config files from the shell. I just don't get what the deal is. I am pretty sure it is a DHCP issue but can't figure out what.
View 9 Replies
View Related
Aug 30, 2010
I have tested several Linux Distros over the last weeks, and with all of them my DSL connection have been working out of the box (for intance Mandriva, Ubuntu, Mint). But it does not work on Dreamlinux, neither on Live CD or now where Dreamlinux is installed on my harddisk.
According to the guidelines provided by my Internet provider I need to use TCP/IP and activate DHCP. And make sure that PPPoE is not activated.
I see nowhere I can do this in Dreamlinux. In the controle panel i can run Wicd. Then I can chose to de-activate Wicd - this gives me an option of entering Adress, Networking mask, Gatway and Nameserver - for static ip it says - and this is the opposit of DHCP, right??
SO - what to do? Should I get a debian package or something? (Dreamlinux is using debian packages, as far as I could see)
View 1 Replies
View Related
Jan 22, 2009
I'm using ADSL connection as a way to access internet.All of us know that in windows we can get configed easily.But it is a little more difficult in Fedora.How can we config ADSL connection in Fedora 10?My modem uses dynamic ip.
View 14 Replies
View Related
Jan 30, 2010
I've been connecting to the Internet via Ubuntu 8.10 on my Toshiba laptop fine for ages now, but today it has stopped working. Yesterday an update came through relating to DHCP and, like all other updates, I installed it. And now my laptop can see the wireless router but it cannot connect to the Internet. (As I always install the recommended Ubuntu updates I didn't look closely at exactly what the update said, but I did see DHCP in the title, so this is why I suspect my connection is now broken.) Or can anyone tell me how to undo yesterday's update? I really wish now that Ubuntu had a utility similar to Windows System Restore.
View 2 Replies
View Related
Jun 17, 2011
I have a similar problem. My ubuntu box is set up as a dhcp router for my Xbox360, my xbox can get ip and DNS information from the computer, but it doesn't seem to get the right info. The ip address it gets assigned is out of the range I've set in etc/dhcp3/dhcpd.conf.
View 1 Replies
View Related
Mar 16, 2011
I'm still fairly new to Linux so please forgive me if my description of my problem leaves out important information. My problem is centered around using a AT91SAM9G45 development board (DB)on Fedora 10. I have directions on how to setup on my host machine a DHCP server to connect to the development board. I have installed an additional network card (eth1) that will be used exclusively to communicate with my DB.
The DB has been setup with an ethaddr=12:34:56:78:9a:bc and an ipaddr=192.168.251.191.
The following is info from ifconfig for eth1:
eth1 Link encap:Ethernet HWaddr 00:0A:5E:1A:46:1C
inet addr:192.168.251.190 Bcast:192.168.251.255 Mask:255.255.255.0
inet6 addr: fe80::20a:5eff:fe1a:461c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:38 errors:0 dropped:0 overruns:0 frame:0
[Code]...
View 3 Replies
View Related
Jun 20, 2010
Since that time I moved to Archlinux and I love it. I do however run lubuntu live from a USB for my work PC. I am having a problem with it. I think it's okay to post here because the core of the system is still Ubuntu. I don't think LXDE is the problem. I start up the live environment and it says 'wired connection connected' but I can not load any pages or do anything.
I thought it may be a problem with configuration so I copied down (from Windows) the IP, Subnet, Gateway and DNS. I put them in manually and it doesn't say connected any more and still no connection at all. I am unsure what to do from here. I am not really familiar with Ubuntu enough to try much. I tried to 'dhcpcd eth0' but dhcpcd isn't installed. I guess the default Ubuntu network manager has dhcp enabled automatically.
View 9 Replies
View Related
Dec 12, 2010
Running 2.6.29-gentoo-r1 on a Sun Ultrasparc 10 with a Sun Happy Meal on eth0 connected directly to my cable modem. Intermittently, with a frequency between a few hours and a few days, I lose internet connectivity. Running ifconfig eth0 indicates all is well and I have a valid IP address but I cannot even ping the cable modem's management address; pings to 127.0.0.1 and eth0's IP address do get a reply but no other address I've tried does. I can 'fix' the problem by issuing
Code:
If I check the CM logs, it appears that it has rebooted itself prior to the loss of connectivity. The strange thing is that the incoming traffic doesn't seem to be affected by this, my PSAD log is full of incoming scans even during the periods when I can't connect to the net. I suspect this is an ISP problem (they own the CM);
View 2 Replies
View Related
Dec 2, 2010
my wireless network connection is not working but wired connection is working .at networkmanager wireless connections are not showing .
[walkingtree@localhost ~]$ iwconfig lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.422 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thrff Fragment thr=2352 B
[Code]....
View 1 Replies
View Related
Jul 17, 2009
I am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
View 5 Replies
View Related
Aug 1, 2010
I'm running an up-to-date Fedora 12 machine with the Gnome desktop (meaning with Network Manager). My network connection is a wired ethernet to a switch which then connects to a Netgear router. For some reason, this machine can't renew its leases with DHCP, so NetworkManager deactivates eth0, taking my machine off the network. I have to click Network Manager and enable eth0, which seems to work every time.
How can I fix it? Here are the relevant bits from /var/log/messages showing a failed DHCP request and then the successful renewal.
Code:
Aug 1 04:00:08 ironton dhclient[12452]: DHCPREQUEST on eth0 to 192.168.1.1 port 67
Aug 1 04:00:08 ironton dhclient[12452]: DHCPNAK from 192.168.1.1
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): DHCPv4 state changed reboot -> expire
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): device state change: 8 -> 9 (reason 6)
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> Marking connection 'System eth0' invalid because IP configuration expired.
[Code]...
View 5 Replies
View Related
Oct 14, 2010
How do I tell the shared connection that it has a static IP and that I dont want a DHCP on the network?Do I have to set up DHCP on the box with the shared connection, even if that box only runs DHCP for a single IP address being the eth0 that is shared?Or can I tell the shared connection that it has a static IP and still allow network manager to run the shared connection?Or should I specify static IP's for all clients and the shared network manager and install say firestarter on the gateway to run the NAT for the eth0 out to eth1.
View 3 Replies
View Related
Jul 17, 2009
I'm having a bizarre problem where my network connection stops working randomly. At first I thought it was a DNS issue since Firefox simply chilled out on "Looking up [hostname]" until it timed out, but after further investigation (pinging IP's, "host" and "dig" being unable to reach servers) it became apparent that I couldn't even access the DNS servers i.e. the Wicked Connection of the East was most sincerely dead.
There are two strange things about this: one, there are no errors except "timeout". The network manager is happy, Firefox is happy until the lookup fails... Two, the failures only start *after* DHCP configuration. DHCP configuration never has any trouble sending or receiving packets. I'm going to try static IP and whatnot to see if that helps, more information later.
View 3 Replies
View Related
May 26, 2010
I've set up a permanent DHCP lease for my MAC address. I did this hoping to resolve the fact that I share my Internet ADSL connection with my wife and my daughter (the latter a great bandwidth hog)!
View 5 Replies
View Related
Nov 20, 2010
I have just started to work on Ubuntu (Ubuntu 10.4 LTS) and I am having some problems to get a WUSB600N vers. 2 802.11n adapter working. I have followed the procedure described at [URL] . The compilation has been successful and I can see the kernel loaded an the module detected:
Code:
adrien@ubuntu:/$ lsmod | grep rt3572
rt3572sta 612272 1
adrien@ubuntu:/$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
The wireless adapter is detected by the system and it can scan the neighboring APs (cf. below with MAC address made unreadable):
Code:
adrien@ubuntu:/$ sudo iwlist ra0 scan
[sudo] password for adrien:
ra0 Scan completed :
Cell 01 - Address: --:--:--:--:--:--:--
Protocol:802.11g
[code]....
View 2 Replies
View Related
