Fedora Networking :: Make A DSL Connection Over WLAN 11?
Aug 22, 2009
I recently got a laptop computer and installed 64 bit fedora 11. I can make wireless connections fine but for my ISP I require a dial in using an username and password. On my desktop this is easy I just make a DSL connection under network manager and select eth0 my wired network card as the hardware and away I go. But now I can't select the wireless card as my hardware connection so my DSL keeps on trying to connect through eth0 which is obviously not plugged in. How do I go about making this connection? I have searched google and other people have this problem but I haven't seen any replies. I have tried using pppoe-setup and manually setting the hardware as wlan0 but this doesn't seem to work as under network manager it just defaults back to eth0.
View 7 Replies
ADVERTISEMENT
Jan 10, 2011
I installed Fedora 14 yesterday via the installation DVD with 3,3 GB. Everything worked fine and when I connected to my wlan and entered the WEP key I got access to the internet. But after about 5 minutes, to connection just got cut and I was again asked for the WEP passkey. But when I entered it this time, the connection failed and I was just asked again (with the same key entered, it even got it saved from last time). As you can think, this is quite annoying, since the time I have internet is not even enough to get some updates done.
Ah, and by the way: The time I have internet it just is unbelievably slow. On my Windows partation, I don't have this problem. I do have a small hint what might be the problem: When I was using Ubuntu, I always had a similar problem, but it did not even connect to my wlan once. The solution was to blacklist some driver, but since I don't know if this might be the problem on Fedora too and if the drivers are the same as on Ubuntu and since I really have no idea about the syntax of the terminal here, I was not daring to try this out.
View 3 Replies
View Related
Jan 3, 2011
After days of trying to get a TL-WN321G usb driver to install in Hardy Heron, it finally arrived in the proper place. In trying to then set it up, I got as far as enabling roaming mode, and the icon showed that the system had made a connection to my Belkin-ASDL-G router. I launched Firefox, which momentarily showed Google home page(where I'd been last when using a wired lan), then it changed to "Server not found".
I've tried rebooting several times, but it remains the same. Each time the dongle led lights up, the icon shows it trying to make a connection to the correct network, but it fails to do so.
On another pc on this network, I looked in the router settings for DHCP client list, and this client has now vanished from the list where it had been showing before. Possible complications may come from a setting in the client list that still shows up with the same host name, generated by an earlier attempt with a different usb dongle.
So two questions - do I need to find out how to remove the old client first, if so how ? And secondly, does anyone recognize the symptoms and can offer a solution ?
View 6 Replies
View Related
May 12, 2011
I'm using the following in a script to connect to my house's wi-fi - it works perfectly for me - simple, and with a static IP:
Code:
modprobe zd1211rw #load the module needed by my wireless LAN adapter
ifconfig wlan0 up
iwconfig wlan0 essid my_network_name_at_home
ifconfig wlan0 10.0.0.8 netmask 255.255.255.0
route add default gw 10.0.0.2 wlan0
iwconfig wlan0 key key_comes_here
However, if I take my machine to the office, we've got DHCP assigned dynamic IPs. How can I modify the above script to NOT do
Code:
ifconfig wlan0 10.0.0.8 netmask 255.255.255.0
route add default gw 10.0.0.2 wlan0
but instead get them from the DHCP service running at work on the W-LAN?
View 2 Replies
View Related
Apr 17, 2011
I have a problem with my wlan connection. it works for few seconds, then stops for few seconds and then starts again (without interaction from my side). I run Ubuntu 10.4 Lucid. The issue started few days ago. Using ethernet, there is no problem. The problem does not exist with other computers i have, there wifi and internet work continuously and flawless. I ping my wlan router. one sees that connection to the wlan router starts and stops every few seconds... (of course, internet connection then behaves analogous)
Quote:
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.30 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=1.21 ms
[code]....
View 3 Replies
View Related
Dec 20, 2009
I created a wireless ad hoc network using network manager. That was simple. I have friend who doesn't have a wireless card, and still would like to join the LAN. It would be nice if he could have a different IP address Is this possible?
View 2 Replies
View Related
Jun 27, 2009
I just fresh installed Fedora 11, and tried to connect via ethernet. I connected the cable and connection was started (in the network managed the two gray circled turned green) but then instead of connecting me the connection was aborted. I am behind a router if it helps and made sure eth0 is enabled. PS this is the output of "service network start":
Quote:
[root@Gal-PC subsys]# service network start
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
[code]......
View 5 Replies
View Related
Oct 2, 2009
"I am new to Linux. Could you please guide me how to make ADSL bridge connection. I have tried to make connection using Network manager. But, it some times works and some times doesn't works."
View 1 Replies
View Related
Apr 11, 2010
how to make pppoe (ADSL) connection on fedora 12
View 2 Replies
View Related
Jun 6, 2010
I dual boot windows xp and ubuntu 10.04 LTS and the wireless card works perfectly fine in xp so I know its not a hardware/network issue. In ubuntu, it detects wireless networks, will connect to network and work for about 20 seconds.
[Code]....
and it continues on after this alternating between a normal 20ms and high ping over 200ms. The connection refuses to load anything off the internet/local network.
View 5 Replies
View Related
Apr 12, 2010
The GUI for network configuration of Fedora is marvellous such that the configuration is almost fool-proof. But how can I make the connection by hand in the command line mode? It goes okay except the very last step. When I disconnect the eth0 interface from the right-hand side of the desktop GUI, I tested how to bring it back by command line but I failed. When disconnected, the ifconfig still shows the eth0 interface, with just the ip address portion changed.
I tried "ifconfig eth0 192.168.1.xx" to give it an ip address but the connection is still down even if the ifconfig shows an ip address for the eth0 interface. Then I tried "/etc/init.d/network restart" and "ifup eth0" and also "route add defaut gw 192.168.1.1" but none of these could accomplish the same work as a single click on the GUI to connect. I am very curious about how to do it in the terminal.
View 1 Replies
View Related
May 28, 2010
I have this output from lspci
Code:
04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
07:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
when i try configure using network manager, i can not connect to wlan, my AP using WPA-PSK
View 7 Replies
View Related
Jun 16, 2011
I installed Fedara 15 yesterday. I was running Fedora 13 before. Since I did the fresh install, my wireless network runs really really slow, i.e. a few KBs every 30 seconds whereas it ran at full speed in F13. I couldn't find the reason for it. I now tried the live-CD for Fedora 14 and it runs at full speed out of the box (whereas F15 is slow even with all updates installed).
Does somebody know a solution?
Laptop: Lenovo X201
Network Card: Ultimate-N 6300
I gathered uname, iwconfig, lspci and dmesg output for both, Fedara 15 and Fedora 14. But as the number of links is limited here in the forum they're all linked here: [URL]
View 3 Replies
View Related
Aug 21, 2010
I am newbie to linux, I am dealing with Fedora core 13. I have already succeedded in building an ad hoc network and a WLAN network. My next step is to get some networking statistics such delay, throughput, etc. So, I need traffic to flow through the network for both multimedia traffic and bulk data traffic. How to send files between nodes on the network (I found commands ftp, rcp but do not know whether they are the correct choice for this). ID their any application to perform this?
Also, I want to perform some video streaming between two nodes to study the behavior of real time data transfer. Is thier any application to perform this?
View 4 Replies
View Related
Mar 3, 2009
I couldnt find something for changing mac address for wireless. how to do that....
View 4 Replies
View Related
Mar 5, 2009
I have been using FC10, it works well with wlan for sometime and goes inactive after some time and hence network goes unavailable. Even after few attempts to reconnect doesn't help. Rebooting helps in bringing it back temporarily.
View 7 Replies
View Related
Jan 27, 2011
How do I install my driver wlan in Fedora 14? I use this notebook hp:
http://h10025.www1.hp.com/ewfrf/wc/p...reg_R1002_USEN
I have already installed the update of fedora and still does not work.
View 2 Replies
View Related
May 2, 2011
Installed F14 on my daughters HP Pavilion a131On. I rebooted multiple times. Do I need to activate something? I'm new to all of this but read through many threads to do as much as I could myself. I used the GUI to load the rt3070 drivers rather than rpm. The GUI is easier I think and should be equivalent. Please let me know what else I need to do. Fedora has been great on my Lenovo but this usb wlan stuff has been a pain.
[Code]...
View 2 Replies
View Related
May 21, 2011
I am unable to connect to the internet in fedora (XP connects fine) I normally use wifi, but have also checked the wired connection.
View 10 Replies
View Related
Jun 24, 2011
I'm running Fedora 15 KDE on a Sony Vaio VPCS13V9E. No problems in connecting to the wlan. Today I upgraded the system. There was an upgrade for Network Manager. After the upgrade the system is not able to connect to the modem - router (Linksys WAG320N) any more. Network manager keeps on crashing and sends messages like "network disabled" or "connection failed". Kde demon is reporting errors too. I guess the new version of Network Manager is bugged, because before the upgrade it did work well ... (unbelievable!).
lspci: 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35).
Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at dd100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn
View 14 Replies
View Related
Feb 12, 2009
I installed F10 today. From live-usb wlan worked fine, but after installing it doesn't find any networks. I tried to google this problem, but everybody says wifi works out of the box. Not for me.
Solved: I disappled wireless networking and appled it again. It found all networks.
View 1 Replies
View Related
Aug 1, 2009
I have a Dell XPS M1330. I installed Fedora 10 on a separate partition and left Vista on the first. It was working just fine and for some reason all of the sudden it is not recognizing the Wireless controller. Vista is still working fine although I did get a couple of "WLAN controller has stopped working" errors. I suspect I may have a physical problem with the controller but I'm confused as to why Vista is still using it but Linux is not. The actual physicall "WIFI" light on the laptop does not even illuminate when I boot Linux. No wireless networks appear in the network list under Linux. Particularly since it WAS working fine for months...
View 4 Replies
View Related
Aug 15, 2009
I have a problem with my Intel PRO/Wireless LAN 3945ABG, The laptop doesn't have a hardware "turn-on" button for Wireless device, normal "windows shortcut" aren't also working. I couldn't turn it on using Network Configuration, it keeps giving me this message:
Error for wireless request "Set Mode" (8B06) : SET failed on device wlan1 ; Invalid argument. RTNETLINK answers: No such device Determining IP information for wlan1... failed.
View 14 Replies
View Related
Dec 7, 2009
I have installed Fedora 12 on my laptop.Installing my Broadcom BCM 4312 wireless drivers works just fine, but after a reboot I have to reinstall them. modprobe wl, modprobe wlan0 etc doesn't work either. I need to reinstall them every time I reboot.
View 7 Replies
View Related
Jul 5, 2010
Since I have installed Fedora 13 it seems that I can't connect to WLAN APs which aren't secured by WPA. I'm surprised about the inserts to the messages logfile:
[Code]...
Most surprising insert for me: Jul 5 20:43:21 nbtobiaslnx NetworkManager[1328]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Is this the reason for my problem? I use KDE and Network Manager for managing my networkconnections.
View 1 Replies
View Related
Feb 11, 2011
The UMTSmon correctly recognizes my mobile phone with operator info and signal strength etc but I can't tether my phone in Network Manager. It says "Unable to open device /dev /ttyACM0" When I try UMTSmon, it o/p "PPP could not make a connection" And a window which gives the following error report
Code:
PPP could not make a connection
PPP stderr -
authRequire authentication from peer
connect <p> Invoke shell command <p> to set up the serial line
[code]....
When I had Mandriva back in 2009, my Sony Ericsson mobile had some issues in connecting but in the end I managed to get it done using the control center. On the other hand, now I have the Samsung Wave which very different. But the old Ubuntu 2009.4 can tether both the sets easily from the live cd.I'm typing this from FF running from the live cd infact
Here is the connection information @Ubuntu's networking Manager !
Code:
Interface GSM (ttyACM0)
Driver cdc_acm
BTW,my system info:
Code:
PCLinuxOS 2010.12 KDE minime
AMD Athlon 3200 64bit
640 mb Ram
Asus K8S LA motherboard
Update: I tried Wvdial. It connects successfully but immediately disconnects ! Says "modem hang up" and gives pppd error 16. Btw, I don't have Kppp, only pppd and pppoe and two other files !
View 8 Replies
View Related
Feb 9, 2009
I have an HP Pavilion notebook with a Broadcom WLANcard that had been working very nicely in Fedora Core 10 until this evening, when I took my notebook to a conference room where there was no internet access. (I tried to connect to wireless networks, but there were none in the area, as I discovered.) am now unable to connect to my local (home) wireless network as the device is now non-existent . Can someone please walk me through the steps to fix this or re-install it (I have tried reinstalling broadcom-wl, but that didn't help). My lspci listing is reproduced below:
Code:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
[code]...
View 10 Replies
View Related
Jul 20, 2009
Recently, I had the courage of installing Fedora 11 on my laptop while risking of trashing my Windows XP. Fortunately, the installation went fine and windows and fedora seems to be working together. But I needed to reinstall Fedora because I didn't do the partitioning right. After that the problem arises. I couldn't connect to the wlan. The first installation it was working fine. Now I can't. I select the network, enter the password and then it just says "Disconnected" or something like that then nothing else happens. So I had to reinstall it again thinking I did something wrong on the installation. But still it wasn't working. But it seems to be working when I boot from the live cd. I must have messed up my network configuration.
View 7 Replies
View Related
Aug 28, 2009
i use fedora11 and try to use wireless i find driver for chip Realtek RTL8187 but want to know command to install it. i save folder of driver on desktop in folder name rtl8187_linux_26.1010.0622.2006has like this
[Code]....
View 9 Replies
View Related
Jan 12, 2011
I've been using Fedora 13 for a few months now on my desktop and since ethernet is not a choice I needed to use a wlan adapter. I did a little research and ended up using a Linksys WUSB54G ver. 4 which worked great (plug and play, no ndiswrapper or any other configuration required) on my wireless g network, using WEP protection. About a week ago I started looking for methods of upgrading my system because. well I just like being somewhat current.
Anyway I used a Fedora 14 Install DVD and used the upgrade option and it worked. All my settings (seem) to be exactly the same as my Fedora 13 settings were and the appearance and location of files etc. are all the same. Now, for some odd reason, to me at least, Fedora isn't showing a wlan icon in the upper right hand (by the way I'm using GNOME) corner like it used to and doesn't seem to have configured my wlan device correctly. I ran lsusb and it shows the device ID (13b1:000d) and the name (Linksys WUSB54G v4 802.11g Adapter [Ralink RT2500USB]) I'd just like to get my adapter working again like it did in 13. I have kernel version 2.6.35.6-45.fc14.i686.
View 2 Replies
View Related
