Ubuntu Networking :: Put Network Manager 8 On Hardy?
May 27, 2010
I am running Ubuntu 8.04 (Hardy Heron), Kernel 2.6.24-24. Because everything is working fine, I would be very reluctant to upgrade to 8.10 or later. However I now have a need to use a Mobile Broadband USB connection to the Internet. I understand that this requires Network Manager 7.something or later.
I got the network-manager (0.8-1) binary from debian. Anyone got any experience of whether I should be able to install it succesfully? I thought I would ask before wrecking my system. (Synaptic seems to only allow me version 0.6.6)
View 3 Replies
ADVERTISEMENT
Dec 17, 2010
I have been using Hardy for about 3yrs now and using dialup to connect to the internet. I have a 64bit ASUS with a nVidia ethernet interface........I have just recently switched to cable broadband with a wired connection direct to the eth0 port. I have another computer running puppy linux in which the broadband works. hence this is how I am typing this now. I have connected my ubuntu machine to the cable and the network admin shows a wired connection but will not let me browse on the net with any browser. Not really sure how I got puppy to find it, but it did.
I have used the network manager on both machines with one connecting and the other not. I know there a newer ubuntu's out but I really do like Hardy and want to keep it, but without internet connection other than dialup it seems a bit lame. I am not above using command line options as I use wodim and wget all the time, so my question is.
View 1 Replies
View Related
Nov 16, 2010
My network doesn't work on boot. I have to ifdown then ifup before it starts working again.
View 6 Replies
View Related
Jan 5, 2010
I've had issues with the later versions of Ubuntu, so in an effort to road-test Firefox 3.5 on Hardy I'd like to change my Karmic/Hardy dual boot to a Hardy/Hardy dual boot, and follow the instructions in [URL] to put the Mozilla build of 3.5 on the new installation.
I can't see any reason why a Hardy/Hardy dual-boot shouldn't work, but does anyone know of any issues with this I might not be aware of?
View 9 Replies
View Related
Jul 1, 2010
I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
View 5 Replies
View Related
Jan 24, 2011
I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
View 2 Replies
View Related
Jun 14, 2010
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies
View Related
Feb 18, 2010
I have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies
View Related
Jul 10, 2010
I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
View 3 Replies
View Related
Oct 26, 2010
My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?
View 4 Replies
View Related
Mar 2, 2010
I had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.
View 7 Replies
View Related
May 3, 2010
I'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies
View Related
Apr 2, 2011
Whenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..
OS:Xubuntu 10.04 LTS!
hardware: dell inspiron 6000
nm applet: 0.8.?
View 6 Replies
View Related
Apr 30, 2010
using Hardy Heron on a old Thinkpad T41.This is a fresh install system and I noticed it kept dropping wireless connection. After google around, seems like this is a common problem? Then I switched to wired network, and turned out the same thing happens again. Looks like doesn't matter wired or wireless, it kept dropping itself from time to time.
fter checking syslog, I found something interesting...it kept complain eth0 is invalid, then it said it found a better connection?I found that extremely weird..
Code:
Apr 30 06:24:32 support kernel: [ 961.236895] e1000: eth0: e1000_clean_tx_irq: Detected Tx Unit Hang
[code]...
View 1 Replies
View Related
Aug 23, 2010
Neither of my wired network connections are listed in the network manager applet. I know that networking seems to be functional since I can ping local devices on the network. I can't resolve DNS names however. I suppose this is because network manager usually handles DNS? I've posted the outputs of various configurations below.
Code:
/etc/NetworkManager/nm-system-settings.cfg
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in
[code]....
View 4 Replies
View Related
May 10, 2010
Loaded Ubuntu 10.4lucid on TransPort NX Mobile Pentium II, 328MiB,Using Netgear Rangemax wn511b. with Broadcom STA wirless driver. bcm43gx.Boot computer and network manager shos "no network devices available" Run system/administration/hardware drivers and the Broadcom STA driver shows up (only one that shows up) REMOVE and then ACTIVATE and the network manager sees it and connects fine. Shut down computer, restart and no device. I am forced to Remove and Activate each time I start the computer.Is there a way to set this driver to be found and run at computer start.
View 4 Replies
View Related
Feb 27, 2010
Since the last update the 'wireless network authentication required' box keeps asking me for my wep key. Everything was working fine previously, I've even re-installed ubuntu just in case it was something I did....again everything was working OK until I installed the latest Nvidia drivers and updated ubuntu.I can see my wireless connection when I click on the network manager icon I just wont connect.Wired connection works fine.
05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
View 3 Replies
View Related
Jul 24, 2010
I'm using NM applet to connect to the Internet.I just need to know my Internet usage details such as Connection Duration,Data sent and received.
View 2 Replies
View Related
Sep 22, 2010
I'm trying to change my network settings under Gnome and 9.10.
System->Preferences->Network Connection brings up "Network Connections". Under the "wired" tab, I see "ifupdown (eth1)". The edit button on the right side is grayed out.
Is this where an IP address can be config'ed, or is it somewhere else?v
View 3 Replies
View Related
Jan 2, 2010
I've installed Karmic after using Jaunty for a year. In Jaunty, my wireless Belkin USB adapter would get it's best signal if I set the rate at 11M...sudo iwconfig wlan0 rate 11MTo avoid having to enter that in terminal after a reboot, I followed the advice of Raven on another thread that suggested using WICD instead of Network Manager, as there were options for scripts in WICD that would allow a startup script...sh -c "/sbin/iwconfig wlan0 rate 11M"This doesn't seem to be working for me in Karmic (my connection constantly drops). Plus, the new icons for WICD are distracting (it changes color from green to yellow when the signal goes from good to low) With Network Manager and setting the rate @ 11M via terminal, everything seems rock solid (I left Last FM on last night and it was still playing when I woke up).
View 2 Replies
View Related
Jan 4, 2010
I used Ubuntu for the first time yesterday (V.9.04) and imediatly upgrade it to V.9.10. After,the DSL conection failed to conect. After reading many threads here I was able to connect by opening a terminal:
sudo pon dsl-provider
It seems ther's a bug with network-manager, but I'd like to use it again as it easier and NB user-friendly.
View 1 Replies
View Related
Jan 21, 2010
I am working to connect several Ubuntu computers to a Hughs satelite radio via a Trednet switch. The ISP requires static IP addresses on our machines. Obviously, to do that I need to access the Network Manager.
When I click on the Unlock button the machines wait for a minute or so and return a "could not authenticate" message. It never prompts for a password.
When I loaded the OS on these computers in the states, there were no issues with the install or updates and configuration. Now that they have been shipped to Africa there is something which has happened to all the computers and they will not unlock.
If i reload the OS they do fine..
View 3 Replies
View Related
Jan 26, 2010
I want to disable network manager but not sure which process to rmmod - I do not want to uninstall it, just disable it sometimes.
View 1 Replies
View Related
Feb 4, 2010
Configuring a complex network in Ubuntu SERVER is a breeze. Doing so in Ubuntu DESKTOP has been a mess. The obvious culprit is the GUI based network manager. What I want to accomplish: DESKTOP boots up with active networking even before anyone logs in. This would be both wired and wireless. When someone logs in (user or administrator or root), the network manager is NOT started and thus can't mess up the networking.
Multiple IP addresses, including static and calculated, both IPv4 and IPv6. Also some static routes to multiple routers (maybe adding RIP or OSPF in the future). I already made script to do this smoothly in Ubuntu SERVER. Laptop users can still configure their computer for use at home by SOME means, even if command line or a script. It's OK to have to reboot to switch between office and home network.
I'd prefer to leave network manager installed, and just have it not run. But if uninstalling it is the best way to get it out of the way, let me know. So far this is all just Ubuntu, but Kubuntu or Xubuntu might also be preferred by future staff.
View 8 Replies
View Related
Mar 27, 2010
Im using ubuntu 9.04. The network manager (at least thats what i think its called, the thing managing network connections that usually resides on the panel in the upper right corner where you can check available connections, log in to VPN etc) has completely disappeared, i dont know what i have upgraded, i usually just click and download all upgrades..Ive tried to re-add it to the panel but i cant even find it there.
View 1 Replies
View Related
Apr 20, 2010
I've been fiddling with Ubuntu for the first time ever today and eventually managed to get the drivers for the network adapter installed. Now, I'm trying to get the computer running it onto my home network; I set it up to connect automatically, entered the WEP key, and hit apply, marveling at how convenient it was.
...So far it's still caused me less trouble than some of the the bizarre problems I've had trying to get a Windows computer on a network, but...it just won't connect. At all. It says it is connecting, eventually prompts me for the key again, says it is connecting again, etc, repeat on infinite loop. Except for the occasional times that it stops trying and then, oddly enough, proceeds to state that it is not connected to e of neighbor's network*, which it wasn't trying to connect to in the first place
View 2 Replies
View Related
Apr 21, 2010
At first my internet was really choppy just using the default network manager, but I switched the kwlan and that was going pretty well, til I had to reboot and it decided to not work anymore. Now my kernel has no network manager, and I just need some guidance.
I tried downloading the original network manager deb packages from the ubuntu archives, but I couldn't get the core application to run (though I could get the GNOME applet) even wtih chmod I didn't have permission to do anything with it.
View 9 Replies
View Related
Apr 22, 2010
[url] I have just had a similar problem.
No network, and dhclient command allowed the machine to lease an ip address from the dhcp server. Networking capability back.
EXCEPT that Network Manager is still greyed out as unmanaged, and right click still gives Network Management Disabled.
Wonder what's going on with Lynx and NM?
View 3 Replies
View Related
May 28, 2010
local network access ok, no internet access.......... weird. IFCONFIG shows my static IP, but I cant access the internet at all.
View 2 Replies
View Related
Jul 19, 2010
I've encountered a new breed of ZTE MF626 - the MF626i which Telstra Australia just started selling today, which network manager is not detecting as a modem. If I insert the device, the kernel correctly sees the first SCSI CD and ejects it, it then see the modem (and the micro SD card in the modem):
[Code]...
I suspect that I could probably use wvdial to make it work, but I'd really prefer not to have to delve into that.... any idea how I can make network manager detect this as a modem?
View 6 Replies
View Related
