Ubuntu Networking :: Natty (11.04) On T410 Network - Unable To Get On Locally And Install Other Packages?
May 2, 2011
I installed natty finally on my laptop (T410 Lenovo) via an upgrade from maverick. I tested maverick thoroughly first, since I had to perform the upgrade over the network, due to issues with natty booting from DVD. The upgrade went fine to natty, the system came up and I was able to get on locally and install other packages, though I did notice from time to time a lag in network performance. I installed VNC server and started it, as well as other network related services. However, I am noticing a definite issue with the network support and I suspect the natty kernel. The configuration looks sound, ifconfig, netstat and other functions appear to display the correct information, at least what I had with maverick (which worked).
Has anyone else seen issues with natty and networking? The glass looks okay, though I am using xfce and frankly there is nothing new there to really force me to upgrade, its just that this is a new LT and if I can cold install natty right now, it will save me an upgrade later.
System configuration (lshw) is below, ipaddress removed to protect the guilty..:
description: Notebook
product: 2522AP1 ()
vendor: LENOVO
version: ThinkPad T410
serial: R8M9B2Z
width: 32 bits
capabilities: smbios-2.6 dmi-2.6 smp-1.4 smp
[Code]...
View 4 Replies
ADVERTISEMENT
Oct 21, 2010
Thinkpad t410, ubuntu 10.04.01 64 bit, can not access internet suddenly by wireless router(Netgear WGR612) today.
I can get ip address from rounter, and can ping 192.168.1.1, but can not access url, telnet 192.168.1.1 80 showed me connection refused error, the weired thing is my another windows xp laptop can access internet through the same wireless router.
View 5 Replies
View Related
Jun 12, 2011
I'm a newbie and try to switch from Win7 to Ubuntu 11.04 with unity desktop.
My internet connection is slower than hell, and I dont know how to fix it. I tried with disable Ipv6 but it doesnt make any difference. Not sure if its disabled proper because if i do code...
View 1 Replies
View Related
May 10, 2010
I bought thinkpad t410 (2516cto) and just finished the installation of opensuse. I havn't noticed some incompatibilities yet, but there's no wireless. the wireless card is :Intel Centrino Advanced-N 6200. Anyone has any clue what's the reason? seems that the card was not recognized in opensuse yet.
View 4 Replies
View Related
May 6, 2011
I installed Fedora fc14.i686 in a VMware player. I have been able to install many packages off the web.
First of all, I'm having this issue: I am having trouble with GIT, it keeps timing out on me. github.com[0: 207.97.227.239]: errno=Connection timed out fatal: unable to connect a socket (Connection timed out). This is happening over a 24hr period so I think its something on my end.
Also, my apache directory is not visible on my local LAN to other machines. I can browse in Fedora, however. Even the machine hosting the VM can't see my var/www/http directory. I set permissions but I have a feeling its a network issue somwhere. BTW, I can ping the Fedora VM (192.168.0.17) from other machines.
View 1 Replies
View Related
Aug 18, 2011
I have recently installed Ubuntu 11.04 from the alternative installation CD; the installation was just the command line system. On top of this I have installed xorg and awesome window manager. The only problem I am having is with sound; I am unable to hear sound played through both browser-based Flash and locally stored files.
Is there something that I have to do before I can use sound? Edit: I have solved the original problem however I would like to know if I can remove pulseaudio as it seems that I am only using alsa.
View 8 Replies
View Related
Sep 18, 2010
Running Lenovo T410 and wireless won't connect at all, wired works fine but wireless can't even see any neighbored network, after lshw -c network I get this result:
*-network DISABLED
description: Wireless interface
product: WiFi Link 6000 Series
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 35
serial: 00:24:d7:0a:a6:bc
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlagn latency=0 multicast=yes wireless=IEEE 802.11abgn
resources: irq:35 memory:f2000000-f2001fff
The funny thing is I have check marked as enable networking and wireless and I have installed hardware and activated as well.
View 2 Replies
View Related
Mar 14, 2010
I have tried installing 11.2 64 bit with Gnome. Every time if finishes the install and reboots it will start HAL daemon and just black screen. I have tried loading with using the number 3 with no video. Same thing black screen after loading HAL daemon. I did a install with selecting VESA same thing.
View 9 Replies
View Related
Apr 30, 2011
I was unable to install Natty on my slave disk, dev/sdb*. Only option in installer are dev/sda*.On the other hand, Gparted recognize all my Hard disks, sda/sdb whatever, and live disk is capable to mount them all.
View 7 Replies
View Related
Apr 30, 2011
I've recently switched over to Ubuntu 11.04. I installed Natty by wiping out Maverick entirely. Everything worked well, until I tried to install ATI graphics drivers through the instructions found here: [URL] The installation goes fine without any errors; however, when I reboot, nothing shows up on the screen. I can hear Ubuntu's startup sounds, but there are no visuals. When I attempt to go to the ATI Catalyst Control Center in Recovery Mode, I get this error:
Quote: There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following. No ATI graphics driver is installed, or the ATI driver is not functioning properly. Please install the ATI driver appropriate for you ATI hardware, or configure using aticonfig.
I've tried uninstalling and reinstalling these drivers multiple times, and I've also tried using the generic driver detected by "Additional Drivers". None of these work at all, I cannot see anything on the screen when any ATI drivers are enabled. I've even tried re-updating Natty via CD, but none of this works. I have a Radeon HD 3450 graphics card, and my CPU is an AMD Athlon 64 X2 Dual Core Processor 5400+. I'm on 64 bit Ubuntu. I had no problems with my drivers on Maverick.
View 4 Replies
View Related
Jul 8, 2011
i've installed ubuntu 11.04 on a friends Asus Eee pc 1005HA netbook. after the installation i tried to connect to the router using wireless, and when i enter the key, it fails to connect, so i tried using an Ethernet cable to connect but that doesn't work either,the network devices on the computer are:
Atheros AR8132 PCI-e fast ethernet controller
Atheros AR 9285 wireless network adapter
It lists the wireless device and the solutions to the problem, however, the solutions seem to be for Ubuntu 10.04 and also 10.10, and im not sure if it will work for 11.04 so far i have been unable to find out anything on the forums about the ethernet
View 9 Replies
View Related
May 5, 2011
I have two laptops, both with broadcom drivers and in both it's working pretty well with my university network but I can't find my home network on the list (I can see my neighbours network). It was working perfectly before the upgrade, and of course, I can connect on windows to my home network.
View 2 Replies
View Related
Jun 20, 2010
I try to install Ubuntu upgrade I get errors Failed to fetch http://us.archive.Ubuntu.com/Ubuntu/...ntu3.7_all.deb. could not resolve [url]....And many more similar to this one I'm using my android to type so I can't copy all of them.My log in screen is black with a cursor it started when my update failed to install properly.I use an Intel procceser, 512mb ram, intergrated Intel video card, 1.6ghz And uh 80gb harddrive.
View 9 Replies
View Related
May 15, 2011
I have a wireless network (192.168.1.0) that's bridged to the Internet and a wired one (192.168.0.0) that's only local. When I am connected to both networks, Natty wants to route my Internet traffic through the wired, local-only one.
Can I make it automatically "just work", so that the right network is chosen for Internet traffic? Otherwise, what's the workaround?
View 2 Replies
View Related
Nov 3, 2010
I am trying to do a net install. I set up a mirror of lenny using apt-mirror inside a virtual machine on my network using the following guide: [url]
And I changed everything in the guide specifically for Lenny.
I gave the VM bridged networking, and assigned it its own static IP address.
When I attempt do an http install, and point the installer to the address, I get the following error message: choose-mirror[3885]: WARNING **: mirror does not support the specified release (lenny).
View 2 Replies
View Related
Jul 20, 2010
I was trying to install git the other day and I system shutdown because of a power cut. Later, when i tried installing git, I get the following error message. In fact, I am not able to install any .deb packages. I get the same error when I try installing them
Code:
dineshsriram@dineshsriram-desktop:~$ sudo apt-get install git
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
View 4 Replies
View Related
Dec 9, 2010
im facing a very serious problem. This error pops up when i try to install/remove any package. Please see the screenshot.
View 9 Replies
View Related
Feb 15, 2011
logon to my RHEL as a user. I am able to logon in as root locally.
View 3 Replies
View Related
Jun 30, 2009
We have a server were we no longer seem to be able to gain access, neither locally or remotely.When we try to connect via SSH we get a "Connection Refused". We have checked that it's not our standard firewall blocking the request, so it can either be the local firewall (which we disabled when installing) or that the process isn't running.However, when we try to login locally on the machine (as root) all we get is "Login failed". We've tried restarting the machine in single user mode to change the root password, and while we can do this succesfully, it still doesn't give us access when rebooting the machine afterwards.No other users (besides the standard users created when installing) are available on the server, so we can't say if this is a problem with the root account, or with logging on in general.
View 1 Replies
View Related
Jun 1, 2011
Code...
Here are the messages appears on terminal. I can reach those URLs by browser and manually download them. But when I try to install them on terminal or via package managers, simply my attempt fails.. What would be the problem here?
View 2 Replies
View Related
Jul 16, 2015
For about the last 24 hours I have been unable to install any packages with APT. A connection to ftp3.nrc.ca can never be established.
1) Is this a problem on my end, or is this mirror down?
2) Is there a way for me to (temporarily) change mirror?
View 4 Replies
View Related
Feb 16, 2010
I had installed Ubuntu 9.04 yesterday evening and made a dual boot with windows Vista. After installing the Ubuntu i opened update manager and started the updates and after half hour, some of the updates were done but the sound and multimedia package was not installed. Then i played a song and ubuntu asked me to install 2 packages for that and after i made a confirmation to that, it shows that it is unable to install the package.
View 2 Replies
View Related
Aug 3, 2010
Running 11.3 on an Acer aspire 2920 laptop. OS is up and running as are other applications. I have been trying to install a .wmv player (for CBT), (kaffeine, MPlayer, VLC) and also crossover for linux. In all cases I get "Installation of package xxxxx rpm failed".
The system downloads without problem but the issue appears to be on the actual installation side.
View 5 Replies
View Related
Mar 7, 2010
I removed all packages starting with x and now im reinstalling them with installpkg but when I try to do this I get the following errorr
Code:
Cannot install x11-skel-7.4-i486-1.txz: external compression utility xz missing
Cannot install x11perf-1.5.1-i486-1.txz: external compression utility xz missing
Cannot install xauth-1.0.4-i486-1.txz: external compression utility xz missing
Cannot install xaw3d-1.5E-i486-1.txz: external compression utility xz missing
[Code].....
View 2 Replies
View Related
Apr 22, 2010
I cannot get package installer, either Synaptic, Ubuntu Center, sodo aptitude install or plain double clicking on .deb files I have already downloaded on my PC to work.I get this:dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.When I do(even after a clear)sudo dpkg --configure. Ubuntu goes and tries to mess up with my boot configuration. wtf does installing a package have to do with messing up my lilo? I get this regardless of how I try to install the package and it makes no sense(ok, If I do this graphically, I get the same errors from a widget window)
View 2 Replies
View Related
Oct 8, 2015
I have been using linux for about a year and have run into a new problem I am unable to solve. It started when I attempted to install some packages I needed to get VirtualBox to run VMs. I am on Jessie.
I am unable to install various packages, including gedit, aptitude etc. I do not think it is a problem with my sources.list as my laptop has the same sources.list and I am not encountering the same problems on it. Packages will not install any dependencies. -f install isn't doing anything for me.
My sources.list...
deb [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb-src [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
deb-src http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
[Code] ....
I tried to check for held packages with
userone@localhost:~$ dpkg --get-selections | grep hold
But get nothing.
sudo apt-get install -y
View 10 Replies
View Related
May 24, 2011
I am not able to install any package using software manager. I make sure that I remain online throughout the process. When I select any software package to install, a window appears that asks for the authentication code. After entering the code, no progress(in any form) takes place and the dialog box remains idle. The same thing happened when I tried to install cheese, netbeans, gcc, eclipse, build-essential, g++, codeblocks and many other such software packages. I would like to state that this problem is persisting from past two days. Earlier I was able to install software packages using software manager and I had already installed about 10 software packages before this problem actually came into notice.
View 4 Replies
View Related
Mar 23, 2011
I have a brand new Slackware 13.1 x64 installation, and I'm having problems with slapt-get.
I'm unable to upgrade existing packages or install new ones. The output in terminal is:
Code:
bash-4.1# slapt-get -i tar
Reading Package Lists... Done
The following NEW packages will be installed:
tar
[Code]....
Worth mentioning also, I managed to install Gnome from [URL] without any problems immediately prior to this error message starting to appear.
I've been using Debian and Ubuntu derivatives for the last couple of years, so I'm comfortable using the terminal and possibly doing some more advanced stuff.
View 4 Replies
View Related
Jul 24, 2010
I am looking for the following missing packages for CentOS 5.5 (64 bit OS) which are required to install Oracle 11g and Oracle 12.1.1 EBS:
When I run yum install for these packages, the yum command cannot find these versions for CentOS 5.5.
openmotif21-2.1.30-11.EL5.i3861
xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386
binutils-2.17.50.0.6-9.0.1.x86_642
* gcc-4.1.2-14.el5.x86_64
[Code].....
where I can download these for CentOS 5.5? Would I use the same rpms for Red Hat Linux or Oracle Enterprise Linux 5.5?
View 1 Replies
View Related
Mar 1, 2009
I've been kind of spoiled by Slackware, where updating an installation without networking is just a matter of storing all the updated packages somewhere (directory, CD, USB, etc.) and doing a:
Code:
upgradepkg *.tgz
I'm trying to figure out how to achieve similar simplicity on Ubuntu (specifically, Ubuntu 8.10). I know how to update the packages on the live CD itself (and have done it several times), but in this particular case I need to install using the unedited, official CD.
I'm currently looking at this (and will set up a VirtualBox image to try it out), but it seems to me like the actual packages are never even mentioned in the article, only the meta-data. I need to be able to do an apt-get update/upgrade on this box and have it use the updated packages which I will have stored on a mounted filesystem.
View 4 Replies
View Related
