i have a Levano S10e intel atom preccessor and the net-book is not connecting wirelessly to the network. i have tried at two locations and even plugged in a exterlal wifi adapter. it wouldnt connect then either, the only way to get connected is to use a cat5 cable. here is the ifconfig output with no cat5 inserted and it not connecting to the internet.:
[Code]....
I tried to setup sharing to connect Ethernet and wireless. I want Ethernet connected to desktop A, and wireless connected to another laptop(B), with my laptop acting as an AP. I set the network settings in Firestarter: Internet for wireless, local network for Ethernet. I want to share Internet from laptop B over the network. Internet won't work from my laptop since it seems to use the wrong interface.(Since the desktop is sharing Internet, although not on Internet usually when connected via Ethernet. And of course DNS/Gateway IPs aren't set for wlan0 since it's acting as an AP.) SMB wouldn't work for desktop A and laptop B: laptop B could detect desktop, but reports error "Path not found".
View 2 Replies View RelatedI'm connecting to my wireless, but I can't connect to the Internet, not even via an IP address.
(*) Can not open web pages via IP address.
(*) Can ping internal hardware no problem.
(*) I can connect to the Internet via Ethernet no problem.
(*) I used to be able to connect via wireless on this computer. No settings changed in the interim.
(*) Several other computers currently connected & accessing Internet via the same wireless - no problem.
(*) Based on other posts, I disabled the avahi daemon, but this had no effect.
Outputs of some commands:
[Code]...
I have never seen this before but to connect to the internet either wired or wireless I have to connect to a broadband connection as well. I am currently using wireless; I connect to ISP with wireless but in order to access the internet I have connect to the wireless connection through my broadband connection(This is where I enter a user name and password.). I'm not sure why this is, I have always just plugged an Ethernet cable in and the computer just knew I guess.
I am using ubuntu-10.04-netbook-i386.iso that I had put onto a USB drive. It booted fine, but when I tried accessing the internet I couldn't. I was able to connect to the ISP, but I couldn't find any settings for a broadband connection. My computer is a Acer Aspire One Netbook 250
Intel Atom
CPU N270 @ 1.60GHz
1.60 GHz 1.99 GB of RAM
Network Adapters
Atheros AR 5B95 Wireless Network Adapter
Atheros AR8132 PCI-E Fast Ethernet Controller
I have a wireless router, but my desktop computer is connecting to it, or maybe to the modem, by an Ethernet cable. It has a built-in wireless card, so just as an experiment, I tried to connect to my network wirelessly. It didn't work. And not only did I not get any internet connection, I can't get any internet through the wired connection either. The internet works fine with Windows Vista (I'm dual-booting), as well as when I boot up Backtrack off of a Live DVD. I can still access my router's config page by going to 192.168.2.1 on a web browser, but I can't access anything else.
View 1 Replies View Relatedi'm having problems connecting to the internet unless i manually enter the IP info.
automatic DHCP does not work. I'm on a dual boot machine vista/ubuntu 10.04 LTS connecting to the internet through a lynksys wireless g router and a cable modem.
I have Ubuntu-laptop with wireless card wlan0 and wired ethernet card eth0 and windows7-desktop with wired ethernet card.I want my desktop PC to connect to the internet via ubuntu wireless card. Meaning that, I'm connected to a wireless internet network in my ubuntu pc and I want to share this connection to the desktop.
[URL]
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedI have just installed Ubuntu and I'm having trouble connecting to the Internet. I have a wireless USB adapter that worked while I was using Vista, but now it doesn't.
View 5 Replies View RelatedI was trying to configure wireless network on my ubuntu machine but could not do it. I am possibly stuck as I don't know much about configuring things on linux platforms.
View 8 Replies View RelatedSo I've been trying to install OpenSUSE on my laptop. The installation went smoothly and then the trouble comes: connecting to the internet. It seems that every time I run a KDE based distro, I have trouble connecting. I've done everything I can think of (which wasn't much): I've run the YaST and tried setting it up that way. I've tried using the terminal and iwconfig to no avail.
View 1 Replies View RelatedI've searched all night for similar threads and either don't understand the instructions or find that my computer simply isn't the same! I've tried to gather as much information as I felt needed when people asked in other threads. Just use small words around me, I'm really *that* technologically inadequet. Why I bought a linux ubuntu computer is still a mystery!
I'm having trouble connecting to my home's wireless internet, which is linksys. I can connect via wire just fine, but I want to access my built-in wireless card. How do I set up the wireless for this machine? Here's the info of what version of Ubuntu and about the card.
Ubuntu 8.04.1
l
Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
What do I do with this information? If I could transfer edible cookies through this computer, I totally would.
This problem started a few days ago. Whenever I attempt to connect to a wireless connection via network manager, my computer completely crashes, going to a black screen with no input from keyboard or mouse. It forces me to reboot using the power switch. Everything works fine when I connect to an ethernet cable, so I am sure it's a problem with my wireless driver.
I already tried (successfully) reinstalling the ath9k driver via compat wireless as was the advice from other forums, but this had no effect. I'm currently running opensuse 11.4, and haven't had this problem until a few days ago
This problem seems a bit ridiculous for a task as simple as connecting to a wireless network, so I'm convinced that either there is some sort of relatively simple way of fixing it, or windows really is the only decent operating system out there..
I'm running Ubuntu 9.10 Live CD and I can't connect to the internet. I click on System --> Preferences --> Network connections and under the tab DSL I click Add. After i fill the information I click to connect to the new connection and after a while it shows me a baloon which says "Wired network: Disconnected - you are now offline".
View 1 Replies View RelatedI would like to connect a PC (it has no white IP) through Internet. It's possible to create tunnel with SSH, but I need more easy way. May be there is some service exists (like TeamViewer), so people can just run simple command on that PC?
View 3 Replies View RelatedAm not able to browse on Linux 5.please provide me step by step procedure to config internet on my Linux 5
View 3 Replies View RelatedI have a problem which is connecting automatically to my spwireless. On my windows, my schools provide me the disc which contains several .cer files and a automated batch files to copy the .cer files to the root folders. I can choose to use the other network but in using that, i have to manually connect compared to using the spwireless. Anyway, my problem is that, how do i add the .cer files and to where so when i connect to the network it will look there for the cert. Because when i manually connect, only one cer can be chosen.
View 2 Replies View RelatedI have a problem connecting to the internet using Ubuntu 9.10 . But the same works fine in Ubuntu 9.04.. First I thought it was my hardware problem and asked my friend(also was using ubuntu 9.04) to try ubuntu 9.10 but he too failed to connect....
I have an wired ADSL Modem given by my Service Provider. When I switch on my modem the router gets connected but it cannot connect me to internet...
Whenever i used to setup a new connection in Windows it would just ask me User name and password here i need to fill up something called as "Gateway" !? The connection won't be accepted unless i fill up something in there... So, what do i put in there? I'm on a LAN of 3 computers connected with a router.The router takes one wire as input from the modem(cable).
View 9 Replies View RelatedI'm trying to get internet to my old server through a laptop. The laptop is running ubuntu 10.10 and the tower is running ubuntu server 10.10 X86.
View 1 Replies View RelatedI need to reinstall my GUI but all I can access currently is a terminal, I have the encryption key and SSID but have found all the how to's I've read really confusing since following certain steps on them give me error messages, I'm connecting wirelessly to wlan0.
View 9 Replies View RelatedI just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
I'm using ADSL modem (not router) and I can't connect to internet. The network manager and the pppoe-setup command doesn't work. So I'm asking some of the experienced users of fedora 12 to help me setup my connection.
Details: ADSL modem with pppoe connection (working fine on win xp)
I am trying to connect to Internet using Wavecome modem with Airtel GPRS connection. I am able to successfully connect and browse the Internet using wvdial. But if I use pppd, I am getting the error message as "LCP Terminated by peer".
The exact error I am getting is pasted below.
[root@pscu1320 ppp]# pppd call gprs-wavecom
GPRS modem init: press <ctrl>-C to disconnect
Wakeup Modem
[Code].....
I had an ubuntu 10.4 box, I used it mainly for programming, virtualization & other stuff. I've installed this box about 1 month ago, working on it everyday. About 2 days ago problem appeared when I just opened up firefox for cheking my E-Mail. I typed : [URL]. & nothing appeared & I just seen the famous firefox page when a networking problem is around . I just wondered and checked the connectivity & the wire itself, but find no problem around them, while playing with firefox I just had a turned on virtualBox machine (Windows XP service Pack 3), I just checked the internet within vm & working fine, I checked my e-mail from vm (windows xp), I thought restarting the system might help to solve the problem but damn, problem didn't solved & still arounds Well, I searched through websites dedicated to linux networking & forums that might help, I did anything that faced to my brain , follow another people recipes but problem did't solved for about 3 days ! Playing with primary & alternative dns didn't help, I did my best about solving the problem, disabling ipv6 from both linux networking settings & firefox itself didn't help also . After that, I thought reinstalling the linux might help to solving the problem, but install a new version of ubuntu, 10.10, I tried it, install it but the holyshit problem still arounds ! I think this might be a bug on ubuntu distro, I tried Mint 10 & the same problem, reinstalling x64 version of fedora core & the same problem .It's interesting that the same settings for TD-8101G TP-Link working fine for my Windows XP, Windows 7 x64 & the problem is arounds just for my linux distros .As I said I checked the internet for the problem & found nothing workable for me. I thought it's better to describe the problem & maybe another people faced with that problem .
View 9 Replies View RelatedI have a CentOS server that I can connect to over my local network. The computer I'm currently on is on that same network and can access the internet. My server can not connect to the internet. The network card is obviously connecting to the network since I can access the server locally with SSH or HTTP. While in the terminal for the server, I type wget google.com and the server can not find the specified host, so this leaves me to believe it can not access the internet.
View 2 Replies View RelatedI have an AWL6075 Golden N Wireless Mini USB Adapter from Airlink, and I'm running Ubuntu 9.10. (Kernel 2.6.31-20-generic) I've learned that in order to get this to work, I needed to download this firmware update: http://launchpadlibrarian.net/373876...8192sfw.bin.gz and copy it into /lib/firmware.I have also needed to download and install the drivers at http://www.filestube.com/f76673d157e2ab6203ea/go.htmlI've even Edited my connection to make it available to all users.This is great, and it gets my internet running. Unfortunately, I seem to have to make the module, and insmod the module 8712u.ko everytime I boot up. I know I had it set in 9.04 to be able to do this on boot up, but in 9.04 I didn't have to re-make it everytime.
View 6 Replies View RelatedI had installed Ubuntu 10.04 yesterday. When I see the network tab, it shows it is connected to the web via eth0. I could download all the packages for updates.But when I try to connect to internet via Firefox, or by evolution or other software,I am unable to connect.The configuration of the ethernet card is proper as I checked that via terminal window.It is a peculiar problem, where I can download update pakages but unable to connect via browser or email client.when I ping to ubuntu.com is shows it is healthy and successful.I have a Acer dual core laptop, and connect to internet via wired lan .
View 9 Replies View RelatedI have an iBook G4 running Debian Lenny. I was wondering, is there anyway to connect to the internet while on a Windows network at school over Ethernet using smbclient? I have both GNOME 2.22 and LXDE .5 on the machine.
View 3 Replies View RelatedI setup a network bridge on pc A, with windows 7 installed on it, using windows default bridging tool. I connected computer B to computer A and Im trying to connect to the internet through the network bridge on computer A. Computer B (client) has two OS's installed, win XP and linux(tried with different distributions, didnt work). On windows XP everything is working, when i try to ping the router (after computer A) it also responds. On linux system nothing is working, and im not quite sure why.
I set up linux to receive IP adress from DHCP, which is router in this case (behind computer A), same way windows XP was configured. I decided to ask here, because I couldn't find anything on the net. My guess is windows-made bridge supports only windows-OS's but that would be kind of strange (its just a software bridge).
