Sometimes I am unable to connect to my WEP network in ubuntu. No matter how many times I try, even restarting, it will not allow me to connect. However if I boot into XP, I can connect to the network. Then when I reboot again and then try in Ubuntu again, it will work.
Router is a Netgear MR814v2
I need to be able to log into (with X enabled) my home computer (running OpenSuse 11.4) from my work computer(running Windows XP). I was originally going to setup ssh on my home computer but then realized that I wouldn't be able to get my desktop this way.At work, we use windows remote desktop connection to log into other computers within our network, but I'm planning on asking my manager if I'm allowed to login to my home computer.If he accepts, I need a method to actually make it happen.I looked at FreeNX which seemed awesome but it doesn't seem to have windows support. To an extent that I would like to only allow my work IP to be allowed to even try an login.The bridge to cross here is the fact that I'm connecting from windows.
View 1 Replies View RelatedI want to connect wi-fi in my system Past some time it was connectd now it is not connecting
I assume that the problem will be wpa authentication
Quote:
To connected wi-fi i think every thing is fine; just it is authenticated with wpa?
Ubuntu 10.10 connects to a DSL modem without any problems - I mean I just plugged it in and it worked - GREAT I bought a wireless router so I could connect my netbook and now my Ubuntu machine which is simply using a cable from the wireless router now DOES NOT connect. I tried a windows machine on the wired connection from the wireless router and it connects without a problem. OF course if I remove the wireless router from the chain, i.e. simply connect directly to the modem it works straight away.
View 6 Replies View RelatedI'm connecting to my wireless, but I can't connect to the Internet, not even via an IP address.
(*) Can not open web pages via IP address.
(*) Can ping internal hardware no problem.
(*) I can connect to the Internet via Ethernet no problem.
(*) I used to be able to connect via wireless on this computer. No settings changed in the interim.
(*) Several other computers currently connected & accessing Internet via the same wireless - no problem.
(*) Based on other posts, I disabled the avahi daemon, but this had no effect.
Outputs of some commands:
[Code]...
I have an old desktop computer that I installed Ubuntu 10.04 on. I also have a laptop with Windows 7 Pro which is connected wirelessly to the internet. The desktop does not have a wireless card and the modem is in another room. I have a spare ethernet cable, is it possible to connect the Ubuntu desktop to the internet by connecting it to the laptop with the cable? I'm not very good with computers.If this isn't possible, how would I go about connecting the desktop to the internet?
View 1 Replies View Relatedwant to connecting between ubuntu 10.10 and windows XP.There are a lot of file , music , movie..etc in my laptop. this is XP other laptop has ubuntu system.want to file transfering with cable each other.
View 2 Replies View RelatedI just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
I have 2 computers, one running Windows 7 (and connected to my router wirelessly) and another running the latest Ubuntu Server version and I am just wondering, since I've already got the windows machine to share the internet connection via their LAN connection, how would I get the Ubuntu to use it?
View 8 Replies View RelatedAfter many hours of searching forums, help files, turning on/off firewalls, etc, I need someone far smarter than myself to help me connect to the above machine. I also looked into Samba and do not understand how to use it. It is installed on my Linux laptop, but I have no idea how to access it. I'm hoping that connecting to my Windows laptop is a fairly simple process.
View 9 Replies View RelatedI'm configuring Ubuntu 10.04 x86 to work with a windows domain with multiple users.
All users need a specific network share mapped.
I am using Likewise Open to join the domain at the moment.
This is what I've got so far.
Code:
This works fine so long as I specify the username and password statically. Is there a way I can get it to mount using the currently logged in users credentials so that it mounts automatically?
The other issue then is how to I specify that user is allowed read and write access?
I'm able to connect to a networked Windows machine and its shares using the Places -> Network -> Windows network interface, but unable to do so using smbclient at terminal command line. I can see the shares using:
smbclient -L //server -U username
But when issuing the command:
smbclient //server/service -U username
I get:
domain=[server] OS=[Windows Server 2003 R2 3790 Service Pack 2] Server=[Windows Server 2003 R2 5.2]
tree connect failed: NT_STATUS_BAD_NETWORK_NAME
The share name has spaces, like
lab raid root share
I use 40 to fill in the spaces. This problem must be something fairly simple if I can connect via the Places GUI but not through the command line.
I have a beefy Win Box desktop that i'm using as a media server and i have a home network setup already using windows xp. I had everything running fine and the PC connects flawlessly to my Bravia TV and both my ps3's so i know the network and sharing settings are setup just fine. Anyways i got tired of all the Windows 7 BS and decided i would once again use Ubuntu on my Toshiba netbook. So the question is how in the heck do i get my Ubuntu netbook to connect to the Desktop? I've tried browsing the fourms but either i'm missing something of just a little slow. What "extensions" would i need to get and how would i go about implementing it from there?
View 3 Replies View RelatedI have an iBook G4 running Debian Lenny. I was wondering, is there anyway to connect to the internet while on a Windows network at school over Ethernet using smbclient? I have both GNOME 2.22 and LXDE .5 on the machine.
View 3 Replies View RelatedWhen I was on Windows I used to be able to connect my laptop to a printer that was plugged into the computer downstairs via the wireless network. This network is still in place, only now I am using ubuntu I haven't got a clue as to how I connect to this network,or if it is even possible at all! how I would go about printing over the network when the other computers on the network are all windows machines.
View 3 Replies View RelatedMy friend has a Windows 7 desktop with a large data hard drive which is set up to allow other users to connect to remotely, such that they have read and write access. To set up a connection from another Windows machine, it is as simple as right clicking in the My Computer window and selecting "New Network Connection", then entering the information requested.
The information my friend as given me is:
- The IP Address
- The Hard Drive's Name
- A Username and Password
I'm just staring with fedora 11 and I want to know how to do the following:
1- Connect to windows shares on another PC.
2- Set these shares to be accessible in the Computer location at all times.
I just finished bringing up Apache and my own Web server and viewed my new site (all locally).My Windows 7 box and the Fedora box are both connected (physically) to my Netgear DGN2200, so they each access the *real* Internet thru it.What I'd like to do now is access the Linux box/Web site from my Windows 7 box through the DGN2200.
View 6 Replies View RelatedI have the following setup: An ADSL Router (192.168.4.1) which plugs into my server (that has 2 network cards) Server(eth0-connecting to the ADSL Router) = 192.168.4.2 Server(eth1-connecting to the windows XP PC) = 192.168.4.3 And the windows XP PC = 192.168.4.4 if I delete the entire routing table and add a default route route add default gw 192.168.4.1 dev eth0 I get an error (I can't remember the error, the PC's at work) however if I unplug the cable going from the PC to eth1, I can then successfully add the default route, and I can ping the router, however when I reconnect the cable to the PC and Server... I can still ping the router (from the server) but I cannot ping the PC
if I try and add another route such as: route add -net 192.168.4.0 netmask 255.255.255.0 gw 192.168.4.4 it wont let me add the rule I have a feeling i am doing something really stupid here with the addressing scheme,
I want to connect a laptop running ubuntu 10.04 to a laptop running windows 7 via direct connection in order to transfer files like music, documents, pictures, etc. I have an ethernet cable that I thought I would need in order to do it. Is that even possible?? If so, how would I go about doing that?
Now, I have tried to share the files wirelessly but for some reason when I pick up the workgroup on the ubuntu laptop and enter the password in order to connect to the windows laptop it says my password is wrong, when I know for a fact that it is not. I know I can transfer files with a flash drive and what not but I want to try to get this working.
i installed unix services for windows 3.5 on a windows xp pro box and it installed fine. I configured nfs on the debian box and exported the ip of the client computer and forwarded port 2049 correctly. I followed the instructions for setting up teh nfs client on windows. However whenever i go to tools->map network drive and type in the server-domain-name:/file-address it says it cannot connect?
View 6 Replies View RelatedI have an Ubuntu 10.10 (64 bit on a Dell PowerEdge T310) that cannot connect to the Internet. The network interfaces work fine because I can connect to our local network and to the firewall appliance. The network is controlled via DHCP. I have another Ubuntu 10.10 machine that connects to the internet without any issues, so I don't believe that it is a firewall issue.
Via networking tools, I am able to perform a lookup, so DNS appears to be working. When I perform a trace route, it makes it to my firewall and then returns "no reply" from there. In firefox, I time out on "connecting to ..." I also fail on any apt-get update calls. I've disabled ipv6 in Firefox with no effect. Ifconfig results and gateway route is all correct.
I have a fresh install of CentOS 5.5. I am trying to browse to the Windows machines on my network (Places > Network Servers > Windows Network), but I get a blank window. I am able to ping the Windows machines using their IP address, but not by their name. What do I need to do to be able to see the Windows machines and also to connect to shared folders on these machines? So far I have tried starting SMB (via System > Administration > Server Settings > Services). I have also tried changing my smb workgroup to "WORKGROUP" (the default was mygroup which did not match my Windows machines.
View 8 Replies View RelatedMy network comprises three PC's .... Windows XP, Windows 98SE and Ubuntu 9.04 running SAMBA. All PC's are configured WORKGROUP=WORKGROUP. The network connection To/From XP/UBUNTU via SAMBA Shares works perfectly OK. However, despite scouring all forum information regarding changes to Win98 ENCRYPTION, (Registry change re: DWORD "EnablePlainTextPasswords"), the Win98 PC refuses to connect to UBUNTU. The UBUNTU PC can conect to all the Win98 shared folders OK. I have disabled my Linux Firewall (Firestarter), I have run SMBCLIENT to check the user password for Win98 and it is validated OK. The Win98 error message is ....
"\Inspiron 510m is not accessible. The computer or sharename could not be found. Make Sure you typed it correctly and try again."
My samba.conf file is as follows ..... Any help or assistance PLEASE !
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = workgroup
# server string is the equivalent of the NT Description field
code....
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedI have Ubuntu-laptop with wireless card wlan0 and wired ethernet card eth0 and windows7-desktop with wired ethernet card.I want my desktop PC to connect to the internet via ubuntu wireless card. Meaning that, I'm connected to a wireless internet network in my ubuntu pc and I want to share this connection to the desktop.
[URL]
Code:
pppd call myvpn
Code:
/var/log/messages
Apr 1 19:00:41 ld4lpha pppd[22146]: pppd 2.4.5 started by root, uid 0
Apr 1 19:00:41 ld4lpha pppd[22146]: Using interface ppp0
[Code].....
The network I am connecting FROM is 192.128.0. The network I am connecting TO is 10.0.0. Do I have this right in my routes?
I can not share documents with windows xp PC and Ubuntu 10.04 via crossed UTP cable (direct, without switch)
In xp the folders are ready to share and can be accessible from windows 7 with the same way.
I followed some tutorials from the web, for example:
$ sudo apt-get install samba samba-common smbclient winbind
$ sudo nano /etc/samba/smb.conf
; name resolve order = lmhosts hosts wins bcast
remove ";"
[Code].....
and restart services: [URL]
Also i made different changes in /etc/samba/smb.conf but is impossible access to XP pc...
I have a simple home network that I am trying to connect Ubuntu 10.04 to. I have no server yet, although I will possibly be adding one in the near future.
I have no problem getting a Internet connection on for Ubuntu. I also can access the Ubuntu machine from my Windows 7 computer. The problem I'm having is being able to access any computer from Ubuntu.
When I go Places->Network, the only option is 'Windows Network'. Opening this, I get two options, 'MSHOME' and 'WORKGROUP' I attempt to open both, and get the same response: "Unable to mount location, Failed to retrieve share list from server."
How am I able to access the other computers from Ubuntu?
My laptop has Ubuntu 9.10. It can connect to shares on my XP and Vista computers without issue, but cannot connect to a share on my Windows 7 system. I'm using "Connect to Server" and have tried by both Computer name and IP address. When I click connect, it prompts me for User ID, workgroup and password, however when I enter them, the same prompt comes back a few seconds later and is blank. I don't receive any errors, it just won't connect.My XP and Vista systems can connect to the Windows 7 share, just not the Ubuntu system
View 9 Replies View Related