I want to connect wi-fi in my system Past some time it was connectd now it is not connecting
I assume that the problem will be wpa authentication
Quote:
To connected wi-fi i think every thing is fine; just it is authenticated with wpa?
Sometimes I am unable to connect to my WEP network in ubuntu. No matter how many times I try, even restarting, it will not allow me to connect. However if I boot into XP, I can connect to the network. Then when I reboot again and then try in Ubuntu again, it will work.
Router is a Netgear MR814v2
Ubuntu 10.10 connects to a DSL modem without any problems - I mean I just plugged it in and it worked - GREAT I bought a wireless router so I could connect my netbook and now my Ubuntu machine which is simply using a cable from the wireless router now DOES NOT connect. I tried a windows machine on the wired connection from the wireless router and it connects without a problem. OF course if I remove the wireless router from the chain, i.e. simply connect directly to the modem it works straight away.
View 6 Replies View RelatedI'm connecting to my wireless, but I can't connect to the Internet, not even via an IP address.
(*) Can not open web pages via IP address.
(*) Can ping internal hardware no problem.
(*) I can connect to the Internet via Ethernet no problem.
(*) I used to be able to connect via wireless on this computer. No settings changed in the interim.
(*) Several other computers currently connected & accessing Internet via the same wireless - no problem.
(*) Based on other posts, I disabled the avahi daemon, but this had no effect.
Outputs of some commands:
[Code]...
I have an old desktop computer that I installed Ubuntu 10.04 on. I also have a laptop with Windows 7 Pro which is connected wirelessly to the internet. The desktop does not have a wireless card and the modem is in another room. I have a spare ethernet cable, is it possible to connect the Ubuntu desktop to the internet by connecting it to the laptop with the cable? I'm not very good with computers.If this isn't possible, how would I go about connecting the desktop to the internet?
View 1 Replies View RelatedI just installed Ubuntu 10.04 on a 2nd desktop system. I erased Win XP and Ubuntu is the only OS on this system. I have Win Vista Ultimate & Fedora 13 on my other desktop system. The cable modem and dlink wireless router is directly connected to the Fedora 13 machine. I want to connect the Ubuntu system to the Fedora 13 system.
View 3 Replies View RelatedI have an Ubuntu 10.10 (64 bit on a Dell PowerEdge T310) that cannot connect to the Internet. The network interfaces work fine because I can connect to our local network and to the firewall appliance. The network is controlled via DHCP. I have another Ubuntu 10.10 machine that connects to the internet without any issues, so I don't believe that it is a firewall issue.
Via networking tools, I am able to perform a lookup, so DNS appears to be working. When I perform a trace route, it makes it to my firewall and then returns "no reply" from there. In firefox, I time out on "connecting to ..." I also fail on any apt-get update calls. I've disabled ipv6 in Firefox with no effect. Ifconfig results and gateway route is all correct.
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedJust i installed Slackware linux , how can i connect this system to Internet? I have BSNL broadband (DSL modem conn to ethernet port)
View 3 Replies View RelatedWe have two networks,one is 10.0.0.* with mask 255.255.255.0 & the other 20.0.0.* with mask 255.255.255.0 and one linux(RHEL5) PC with two network interface eth0,eth1.(configured as Router)
eth0 is 10.0.0.1 and eth1 is 20.0.0.1
we have enabled IP_Forward using "sysctl w net.ipv4.ip_forward=1"
cat /proc/sys/net/ipv4/ip_forward is 1
but unable to ping from one network to other network.
two networks are connected to Linux PC.(10.0.0.1 & 20.0.0.1)
still wht configuration required to establish the connection between two networks using LINUX PC.
from router(linux PC) both network PC's are pinging but not from one network to other network.
Using the instructions provided here, I've been able to use my Linux desktop to VPN into my workplace when running 32-bit Maverick. I've yet to accomplish the same using 64-bit Maverick, which has forced me to install the 32-bit version on my 64-bit Gateway NV55C. Has anyone been able to use Juniper Network Connect on a 64-bit Linux operating system?
View 1 Replies View Relatedneed to connect My System-ubuntu with Laptop-Fedora 10 LAN. Can I connect directly with c-cable Laptop to System?How to set that this 2 see each other?
View 1 Replies View RelatedI have two machines in different location, lets say machine A and machine B.
Machine A:
- Linux Red Hat OS.
- Has internet connection (no proxy).
- Has public IP.
Machine B:
- Windows XP OS.
- Has internet connection (with HTTP proxy).
- Has connection to machine C and machine D. Machine C and D don't have internet connection, but machine B can connect to those machines because machine B, C, and D are located in the same network.
I need to connect machine C and D via machine A. I heard it can be done using ssh between A and B, but I don't know the details.
I have a arm board where qtopia installed. there is no ssh or scp installed . how can i connect my board to my linux desktop.
View 2 Replies View RelatedI have a 5720 Mini PCIE broadband modem card and though it works, it won't connect automatically in a Ubuntu system. Network Manager says it is enabled when I right click on the icon, but when I do a left click it says it is disabled. I have to right click and disable and then enable before my Verizon connection will work.
View 1 Replies View RelatedI'm running the 64-bit version of Fedora 12 on a MacBookPro5,1 system. I am unable to connect to my wireless network, which shows up in the list of available wireless networks.
I will enter my password and the system will try for several seconds to establish a connection and then fail.
I know the network is fine because I can connect to it when I boot the computer in Mac OS X.
What can I try that will allow me to connect to my wireless network under Linux?
I'm running the 64-bit version of Fedora 12 on a MacBookPro5,1 system.
I am unable to connect to my wireless network, which shows up in the list of available wireless networks.
I will enter my password and the system will try for several seconds to establish a connection and then fail.
I know the network is fine because I can connect to it when I boot the computer in Mac OS X.
What can I try that will allow me to connect to my wireless network under Linux?
I am a primary school teacher at a school with hardly any money running 50 pcs on windows server 2003. We recieved 2 donated pcs without windows, so thought of installing a free copy of linux on them and then connect them to the server. Which linux version does this best and how would i do this?
View 6 Replies View RelatedI have a query related networking .
I want to know how to connect from a server which is operating on a windows os from a linux machine using ssh
I'm using Linux mint and get Internet wirelessly from the router downstairs. i have xbox live and get Internet by following the instructions from this page:
http://www.linuxquestions.org/linux/...a_wireless_LAN
but i cant seem to get the script file to run automatically or for the commands to run, so i have to run it everytime i want to connect to xbox live. is there anyway i can solve this?
I am trying to connect this cable
[url]
However, it refuses to connect properly. It previously connected, but now whenever I plug it in, nothing happens.
lsusb before:
Code:
lsusb after:
Code:
dmesg error:
Code:
From some other googling, is seemed as if removing "ehci_hcd" or "uhci_hcd" would fix it, however running the following commands does nothing, as shown below:
Code:
I've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
I tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
I need to be able to log into (with X enabled) my home computer (running OpenSuse 11.4) from my work computer(running Windows XP). I was originally going to setup ssh on my home computer but then realized that I wouldn't be able to get my desktop this way.At work, we use windows remote desktop connection to log into other computers within our network, but I'm planning on asking my manager if I'm allowed to login to my home computer.If he accepts, I need a method to actually make it happen.I looked at FreeNX which seemed awesome but it doesn't seem to have windows support. To an extent that I would like to only allow my work IP to be allowed to even try an login.The bridge to cross here is the fact that I'm connecting from windows.
View 1 Replies View Relatedi upgraded to 10.04 and when i connect my psp system it calls it 9"e instead of PSP wich it used to in 9.04. how to rename it?
View 2 Replies View RelatedJust installed Ubuntu 10.04 LTS netbook edition and everything goes well except for one thing.
When I connect my lcd monitor to the vga port the system lags. If I listen to music and browse web pages at the same time, the sound skip and when the page stop loading, music is ok. Also, the mouse skip. If I do circle with it on the desktop without doing anything else, it will skip.
The strange thing if I remove the external monitor and reboot the system everything comes back to normal.
I had Intrepid Ibex for 2 years without any problems. I remember a post saying that powernowd should be disable, but can't find the process from the startup list anymore.
I am trying to connect an Ubuntu 10.04 desktop system wirelessly to another desktop that is directly connected to a cable modem via dlink wireless router and ethernet card. I have not been able to connect on the second system (Ubuntu) to the wireless router.
View 9 Replies View RelatedI've been trying for a few hours to connect to the internet on my debian jessie system. I used the netinstall without installing a DE so I boot into the command line for the mean time.
I have had no luck connecting to the internet after trying to configure the network. I have followed the debian tutorial from the wiki and tried some youtube video tutorials. I just have an ethernet cable connected to my home network. I have tried both dhcp and a manual static setup using /etc/network/interfaces and checked the /etc/resolv.conf file. Ping doesn't work and i cant update or install anything on the system...
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
I'm having problems connecting to the mysql database on my system. I first noticed this when I was trying to set up the program anymeal. I subsequently tried using MySQL Administrator (mysql-admin), but had no luck. It gives my the following feedback:
Code:
Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Click the 'Ping' button to see if there is a networking problem. I press the ping button, and it seems to connect.
Code: