I just finished bringing up Apache and my own Web server and viewed my new site (all locally).My Windows 7 box and the Fedora box are both connected (physically) to my Netgear DGN2200, so they each access the *real* Internet thru it.What I'd like to do now is access the Linux box/Web site from my Windows 7 box through the DGN2200.
View 6 RepliesI just finished bringing up Apache and my own Web server and viewed my new site (all locally).My Windows 7 box and the Fedora box are both connected (physically) to my Netgear DGN2200, so they each access the *real* Internet thru it.What I'd like to do now is access the Linux box/Web site from my Windows 7 box through the DGN2200.
View 1 Replies View RelatedI just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
I'm just staring with fedora 11 and I want to know how to do the following:
1- Connect to windows shares on another PC.
2- Set these shares to be accessible in the Computer location at all times.
want to connecting between ubuntu 10.10 and windows XP.There are a lot of file , music , movie..etc in my laptop. this is XP other laptop has ubuntu system.want to file transfering with cable each other.
View 2 Replies View RelatedSometimes I am unable to connect to my WEP network in ubuntu. No matter how many times I try, even restarting, it will not allow me to connect. However if I boot into XP, I can connect to the network. Then when I reboot again and then try in Ubuntu again, it will work.
Router is a Netgear MR814v2
I have 2 computers, one running Windows 7 (and connected to my router wirelessly) and another running the latest Ubuntu Server version and I am just wondering, since I've already got the windows machine to share the internet connection via their LAN connection, how would I get the Ubuntu to use it?
View 8 Replies View RelatedAfter many hours of searching forums, help files, turning on/off firewalls, etc, I need someone far smarter than myself to help me connect to the above machine. I also looked into Samba and do not understand how to use it. It is installed on my Linux laptop, but I have no idea how to access it. I'm hoping that connecting to my Windows laptop is a fairly simple process.
View 9 Replies View RelatedI'm configuring Ubuntu 10.04 x86 to work with a windows domain with multiple users.
All users need a specific network share mapped.
I am using Likewise Open to join the domain at the moment.
This is what I've got so far.
Code:
This works fine so long as I specify the username and password statically. Is there a way I can get it to mount using the currently logged in users credentials so that it mounts automatically?
The other issue then is how to I specify that user is allowed read and write access?
I have the following setup: An ADSL Router (192.168.4.1) which plugs into my server (that has 2 network cards) Server(eth0-connecting to the ADSL Router) = 192.168.4.2 Server(eth1-connecting to the windows XP PC) = 192.168.4.3 And the windows XP PC = 192.168.4.4 if I delete the entire routing table and add a default route route add default gw 192.168.4.1 dev eth0 I get an error (I can't remember the error, the PC's at work) however if I unplug the cable going from the PC to eth1, I can then successfully add the default route, and I can ping the router, however when I reconnect the cable to the PC and Server... I can still ping the router (from the server) but I cannot ping the PC
if I try and add another route such as: route add -net 192.168.4.0 netmask 255.255.255.0 gw 192.168.4.4 it wont let me add the rule I have a feeling i am doing something really stupid here with the addressing scheme,
I'm able to connect to a networked Windows machine and its shares using the Places -> Network -> Windows network interface, but unable to do so using smbclient at terminal command line. I can see the shares using:
smbclient -L //server -U username
But when issuing the command:
smbclient //server/service -U username
I get:
domain=[server] OS=[Windows Server 2003 R2 3790 Service Pack 2] Server=[Windows Server 2003 R2 5.2]
tree connect failed: NT_STATUS_BAD_NETWORK_NAME
The share name has spaces, like
lab raid root share
I use 40 to fill in the spaces. This problem must be something fairly simple if I can connect via the Places GUI but not through the command line.
I have a beefy Win Box desktop that i'm using as a media server and i have a home network setup already using windows xp. I had everything running fine and the PC connects flawlessly to my Bravia TV and both my ps3's so i know the network and sharing settings are setup just fine. Anyways i got tired of all the Windows 7 BS and decided i would once again use Ubuntu on my Toshiba netbook. So the question is how in the heck do i get my Ubuntu netbook to connect to the Desktop? I've tried browsing the fourms but either i'm missing something of just a little slow. What "extensions" would i need to get and how would i go about implementing it from there?
View 3 Replies View RelatedI have an iBook G4 running Debian Lenny. I was wondering, is there anyway to connect to the internet while on a Windows network at school over Ethernet using smbclient? I have both GNOME 2.22 and LXDE .5 on the machine.
View 3 Replies View RelatedWhen I was on Windows I used to be able to connect my laptop to a printer that was plugged into the computer downstairs via the wireless network. This network is still in place, only now I am using ubuntu I haven't got a clue as to how I connect to this network,or if it is even possible at all! how I would go about printing over the network when the other computers on the network are all windows machines.
View 3 Replies View RelatedI need to connect to a windows vpn now. I do not have time to spend days attempting to get a connection going. All previous posts here, and those coming up in google do not at all describe how to do this. So it begs the question: How to simply connect to a vpn using a Linux client? (Do not link some where that does not contain instructions, actually give a description on how to connect)
View 2 Replies View RelatedMy friend has a Windows 7 desktop with a large data hard drive which is set up to allow other users to connect to remotely, such that they have read and write access. To set up a connection from another Windows machine, it is as simple as right clicking in the My Computer window and selecting "New Network Connection", then entering the information requested.
The information my friend as given me is:
- The IP Address
- The Hard Drive's Name
- A Username and Password
i installed unix services for windows 3.5 on a windows xp pro box and it installed fine. I configured nfs on the debian box and exported the ip of the client computer and forwarded port 2049 correctly. I followed the instructions for setting up teh nfs client on windows. However whenever i go to tools->map network drive and type in the server-domain-name:/file-address it says it cannot connect?
View 6 Replies View Relatedconneting my windows 7 Computer to my Linux Fredora Domain without Upgrading Samba .
View 5 Replies View RelatedI want to connect a laptop running ubuntu 10.04 to a laptop running windows 7 via direct connection in order to transfer files like music, documents, pictures, etc. I have an ethernet cable that I thought I would need in order to do it. Is that even possible?? If so, how would I go about doing that?
Now, I have tried to share the files wirelessly but for some reason when I pick up the workgroup on the ubuntu laptop and enter the password in order to connect to the windows laptop it says my password is wrong, when I know for a fact that it is not. I know I can transfer files with a flash drive and what not but I want to try to get this working.
I first booted into Fedora and it connected to the Interneting was working brilliantly. I then booted into windows for a session of TF2. After I booted back into Fedora, it wouldn't connect to my network.I did fix this by doing a hard reset on my router, BT homehub. It's just that I don't want to reset and apply custom settings all the time.
View 1 Replies View RelatedMy network comprises three PC's .... Windows XP, Windows 98SE and Ubuntu 9.04 running SAMBA. All PC's are configured WORKGROUP=WORKGROUP. The network connection To/From XP/UBUNTU via SAMBA Shares works perfectly OK. However, despite scouring all forum information regarding changes to Win98 ENCRYPTION, (Registry change re: DWORD "EnablePlainTextPasswords"), the Win98 PC refuses to connect to UBUNTU. The UBUNTU PC can conect to all the Win98 shared folders OK. I have disabled my Linux Firewall (Firestarter), I have run SMBCLIENT to check the user password for Win98 and it is validated OK. The Win98 error message is ....
"\Inspiron 510m is not accessible. The computer or sharename could not be found. Make Sure you typed it correctly and try again."
My samba.conf file is as follows ..... Any help or assistance PLEASE !
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = workgroup
# server string is the equivalent of the NT Description field
code....
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedI dual boot Windows/Fedora 11 on my Dell Latitude D830 laptop, which has an Intel PRO/Wireless 3945ABG card and I have just bought a Linksys WRT160NL wireless router. I am currently trying to set up OpenWRT linux on the router. Because of the nature of my problem I have also posted this on their forum.I am having trouble connecting to my OpenWRT install via Fedora. Things seem okay in Windows, but when I try to connect from linux my laptop locks up completely and I have to hard reboot. I previously have never had any trouble connecting to any other router with this install of Fedora.
View 3 Replies View RelatedGot up this morning and switched on theLinux Box and started getting wifi connect problems. I could work for about 5 mins then it would start searching and asking me to confirm to connect to my network.After some time NM kept on asking all the time to confirm the network and key.I reset the router and check to see if other PCs were OK and a Windoze & Linux laptops were fine, no problem there so it's not the routerd.I'm wondering if the broadcomm card is starting to fail as it heats up or could it be a corrupt file or parametersNo updates have been done in the last month, it just started today. Here are the results from the log and dmesg:
[root@mylinux ~]# dmesg | grep b43
b43-pci-bridge 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
b43-phy0: Broadcom 4306 WLAN found
[code]...
I'm using ADSL modem (not router) and I can't connect to internet. The network manager and the pppoe-setup command doesn't work. So I'm asking some of the experienced users of fedora 12 to help me setup my connection.
Details: ADSL modem with pppoe connection (working fine on win xp)
I have Ubuntu-laptop with wireless card wlan0 and wired ethernet card eth0 and windows7-desktop with wired ethernet card.I want my desktop PC to connect to the internet via ubuntu wireless card. Meaning that, I'm connected to a wireless internet network in my ubuntu pc and I want to share this connection to the desktop.
[URL]
I recently set up a network of computers via Ethernet, all of which use Fedora 10. I would like to be able to get any computer on the network to hook up to the internet.(I think the solution is now figured out - see below, on page 2, "problem solved")
View 14 Replies View RelatedHow can I connect laptop to internet using GPRS enabled Phone?
Phone is Nokia 6600 slide. And laptop(Dell) has F10 installed.
I connected two machines, I have their given of the addresses ip in a static way and not with DHCP. I gave to the machine server the address: 192.168.0.1, and in the machine client the address 192.168.0.2.
View 5 Replies View Relatedusing a text interface for my computing but I have run into an issue. Does anyone know of a CLI networking tool that will allow me to connect to a non-broadcasting network? I have tried cnetworkmanager and attempted wpa_cli. The first does not seem to support it and I have not played too terribly much with the second. I have discovered that when I boot my comps into KDE and tell NetworkManager to connect to the network cnetworkmanager can find it then, but that does me no good for what I want, which is to boot my computers straight to runlevel 3 and get connected. If it means anything I am running F11 on a Dell Inspiron 1521 Laptop with a Broadcom wireless card (awfully annoying to set up, but it is working fine) as well as F11 on a desktop of my own designing with a Netgear wireless adapter.
P.S. I realize that broadcasting the network would be the trivial solution but alas I am not the admin on the router and he is out of town.