last night i have install SUSE 11.2 from the live CD. I have dual boot system with windows.Here is the problems.....i m able to access internet using same connection in windows but unable in suse.
View 3 RepliesI have bsnl broadband connection in dual mode in windows no problem but in ubuntu I cant create a broadband connection. I want to connect in dial up mode.
View 3 Replies View Relatediam install ubuntu 9.10 i want to connect my bsnl broadband internet
View 3 Replies View RelatedI have got my bsnl broadband few weeks ago. It is running nicely on my ubuntu lucid desktop. But form past few days I'm unable to browse some of my websites from ubuntu. I have dual boot my pc wiht Microsoft Window XP(original). The websites which are not opening in ubuntu are easily opening in xp. I have changed the DNS servers to 8.8.8.8 and 8.8.4.4 and also my MTU to 1452 but nothing is happening.
View 9 Replies View Relatedjust i installed ubantu linux 10.4 lts , how can i connect this system to internet? I have BSNL broadband (DSL modem conn to ethernet port) modal quidway wa1003a
View 2 Replies View Relatedi need help to connect bsnl dataone broadband.with DSL.i have tried above procedure but connection get failed.
View 2 Replies View RelatedI have a windows machine (in a domain) and I have created 2 Virtual Machines with Suse 11.2 installed on them.Now, I want to share a folder in windows to both Suse images. I am succesfully able to do that.I used: mount -t cifs -o user..... command to mount it at /mnt/win on my linux and succesfully able to work with it.
Now, I want a user in my Linux box (both Linux images)to be able to write to the shared folder in windows (actually both linux images will write to the shared folder but it is based on acquairing locks and releasing them to be able to use the shared folder on windows).
I tried etc fstab and lot other options but my efforts were in vain.Simply put - I need a user in my linux box (suse 11.2) to be able to write to a windows shared folder.
Just installed Suse 11.4 Kde build. Using 64 bit ECS A780GM-A Ultra Mobo, 4 gigs ram, Athlon 7550 CPU, I am unable to detect my Verizon broadband MIFI 2200 with this new OS, have used Ubuntu in the past. Plugged in USB cable for modem into different ports, still does not work,
View 1 Replies View RelatedI have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies View RelatedI want to use my laptop to share network for VoIP adapter. I'm using mobile stick as well as wi-fi and Network manager under Gnome 3. Voip adapter asks for address via DHCP to gain the access to the server some where in the other side of the world.
View 6 Replies View RelatedI am running a 3-G wireless USB broadband modem, and connecting with Network Manager, but I keep getting disconnected when idle after 5-6 minutes. I am used to using Kinternet to connect with my 3-G wireless USB broadband modem, and setting it up in Yast / Network / Modems, but was not able to configure my modem there (for some mysterious reason) so ended up using Network Manager instead.
What's going on here regarding YAST being unable to configure my modem (even when Network Manger is disabled). But my main problem at this point is that my connection times out after about 6 minutes if I'm idle. This is a big problem for me because I type slow and frequently get disconnected while posting on message boards. Where are the idle time out settings are for Network Manager? I can't seem to find them.
to setup BSNL's WLL modem
Model is Linktop CT800P. Device is detected as "FWP USB Modem 3197" in Windows XP.
I've setup this device in Windows XP, but unable to do the same in Linux.
I installed a new 11.2 and now my huawei e1692 works (thanks to huawei e1692 don't work -
openSUSE Forums).
kde=Versione 4.3.4 (KDE 4.3.4) "release 2"
kernel=2.6.31.5-0.1-desktop
[code]...
I connect to the internet with a mobile broadband dongle. I would like to change the dns settings as page loading seems to be running slow. However, there is no ip tab associated with mobile broadband in the knetwork manager module. There is however for my vpn connection. I have found reference to the ip tab in other postings but alas I am stumped. Is it possible that the mobile broadband connection does not load that tab whereas users on wireless or ethernet have it? That is the only solution I can think of.
View 2 Replies View RelatedProblems with setting up mobile broadband in KDE4? Than use this instruction: openSUSE starter: Step 2. Need mobile broadband? Use the GNOME applet to make the GNOME nm-applet work under KDE. With this nm-applet I have set up mobile broadband within couple of seconds.
View 1 Replies View RelatedI have a Huawei E173u-2 mobile broadband usb stick. It is recognised as a gsm-modem and shows up as such in the networkManager-plasmoid. I have set up the connection details for my ISP (O2), but I can't connect. When I click on the connection, "signal strength" is shown as well as "operator" (o2 - de). The "connection state" changes to "Preparing to connect", then "Setting network address". Then the modem vanishes and comes up again a few seconds later.
Here is the log (/var/log/messages):
Code:
It seems like there is a connection for about 5 seconds, then the modem hangs up and restarts .
The stick works fine with our windows netbook, so I don't think it is a hardware failure.
How do I get this working?
My system:
opensuse 11.4
kernel 2.6.39-30-desktop (2.6.38 gives the same error)
kde 4.6.3
plasmoid-networkmanagement 0.9.svn1192577-168.6
Ubuntu 11.04 isn't detecting BSNL 3G USB Datacard. I was using 10.04 earlier & could easily install it then. But now 11.04 isn't detecting the USB datacard, so I'm unable to connect to internet for updates
View 9 Replies View RelatedI am trying to find out how to get the mobile broadband providers to appear on the network manager app, coz at the moment when i try to create a new mobile broadband connection the list of providers is empty.
View 3 Replies View RelatedI recently got one of these modems and it had discovered very serious detection problems. I had been using one of the Cricket PCMCIA modems but it had a problem of dropping connections every 30 seconds or so. Anyway, this modem works a lot better but there is a trick to get it working.
Since the modem has a built-in flash card reader and flash memory containing the Windows software, when you first plug the device in, it is detected by the OS as a flash drive rather than a modem. If you try to configure the modem at this point, it will be impossible since no modem will have yet been detected.
In order to get the device to be detected as a modem, it needs to be "flipped". The following thread from the Ubuntu forums discusses the details of the problem and contains a link to a utility to "flip" the device: [ubuntu] HOWTO: Cricket Wireless A600 Broadband Modem - Ubuntu Forums
Once the device is flipped, I configured it using YAST / Network Devices / Modems. Mine is detected as /dev/tty/ACM0. I use Kinternet to connect, though Network Manager may also work, but I have not yet tested it.
I have this usb stick:
The problem is that I have no clue what information I am supposed to give when configuring it through KNetwork manager. The password is disabled and I think the username should be telenor which is my ISP, the other info lines in KNetwork manager, however, I am very uncertain of, and I can't seem to get it working. I have switched from traditional setup with ifup to user controlled through Network Manager and the modem is detected. The module option seems to be loaded and the 'mode' of the stick seems also to be correct, it is not detected as a storage device at least.
I've just installed openSuse 11.3. How can i connect to the internet. The Mobile Broadband tab on YaST is not clickable. On Linux Mint that tab is available.
View 2 Replies View Relatedi am using mobile broadband to connect with network after i connecting mb.it drops it's connection for every 10 minutes.i need to restart to reconnect it.it is happening in kde.
View 5 Replies View RelatedWe have several new DELL STUDIO-XPS machines pre-packaged with Win7 onto which we intend to load 10.3 the 2.6.22.5-31-default kernel as a dual boot.
The first test machine however is showing reluctance to reveal its NIC under SuSE. The card in question is a Broadcom Netlink (TM) Gigabit Ethernet with driver version 12.4.0.3 under Windows.
The error message I recieve under SuSE is "Unable to configure network card because kernel device is not present".
ifconfig confirms this showing only the loopback device.
The tg3.ko driver seems to be OK (although I am not sure how to interogate this file for its vesion?). It is listed under /sbin/lsmod and I have attempted a rmmod followed by an insmod but thsi seems to have no effect.
Talk on the net suggests Windows will not 'let go' of the card on a dual boot machine but this seems unlikely and I have attempted the various power down options without success.
I manage to get my mobile broadband working (connected, I mean) in both root & user account. However, my web browser, IM etc only work in root account.In user, knetworkmanager does show that my Huawei E160G is working fine, connected but I still can't surf the net & chat. I've included the dialout & uucp group for user account but that still doesn't resolve the problem
View 9 Replies View RelatedI want to install a driver for the Mobile broadband HSDPA modem of the Lenovo T510 nootebook because it dosent work with the Networkmanager.
I use opensuse 11.3 whith the kernal 2.6.34-12.
So what i want to do:
1) get attached patch
2) install and extract kernel source
3) patching and compilation (only drivers/usb/serial subdirectory)
4) copy resulting modules to kernel modules directory
If I compile: make O=../temp prepare i get a mistake.
The exactly mmessage is:
i am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
View 4 Replies View RelatedI mistakenly delete my default panel. How to add the network notifier? Tried to look for the widget but nothing? i need to choose my network connections. And when i look at the Network manager my wireless if black ? It means it didn't detected my wireless?
View 8 Replies View RelatedI just installed suse on this computer, and am wanting to allow other computers to store files on it as a file server. I was reading the online manual and in the personal file preferences, it shows an option to enable 'share public files over network'. The problem is I don't see that option when I open up file preferences. All I see is an option to allow sharing using bluetooth, nothing about sharing over the network. When I look in the network I can see the computer running suse, but when I try to connect to it, it says 'unable to mount drive: connection refused by server.'
View 3 Replies View RelatedNew SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.
Firewall
Disabling the firewall makes no difference.
Not using a network manager (can't see how to assign fixed address if I do - all greyed out).
ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).
[code]....