Fedora :: How To Configure Bsnl Ev-do Data Card In 11
Mar 17, 2010How to Configure BSNL EV-DO Data Card in Fedora 11 :
1. Click on Application.
2. Go to System Tools
3. Go to Terminal
[code]....
ADVERTISEMENT
Fedora Networking :: How To Configure Bsnl Ev-do Data Card In 11
Mar 16, 2010How to Configure BSNL EV-DO Data Card in Fedora 11 :
1. Click on Application.
2. Go to System Tools
3. Go to Terminal [tanmoy@localhost ~]$
4. Type su -l and enter
5. You have to Type your Password as a super user.
[tanmoy@localhost ~]$ su -l
Password:
[root@localhost ~]#
6. Plug in the USB DATA CARD.
7. Write lsusb and press enter for acknowledgement of detecting the USB device.
[root@localhost ~]# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
Fedora :: How Are Using BSNL EVDO Data Card - First Click On Application - System Tools
Oct 22, 2010I found lots of pepole who belongs to India and using BSNL Data card wants to connect Internet from fedora so I thought post a thread which will help all how are using BSNL EVDO Data Card. At first click on application - System Tools - Terminal enter the following code on your terminal
Updated part starts here When I was using Fedora 10 I post this thread on that time gedit worked properly with "su" Now here if you are using Fedora 14 and by using su gedit is not appearing then try
Code:
su -
instaed of only "su" hope gedit will work properly. If dose not work then you can follow the next post instructions. Or you can ask in the forum for I am updating "su" by "su -" If you are using earlier version you can try by only "su" or "su-" if none of this works then follow next post. Just remember you have do this in a single terminal and step by step to avoid maximum uses of "su" or "su -"
[Code]...
Fedora Networking :: Bsnl 3g Data Card Connection In Fedora 14
Dec 6, 2010How to connect bsnl 3g data card in fedora14. i tried with mobile broadband connection but it is not working
View 4 Replies View RelatedUbuntu Networking :: Cannot Configure Bsnl Dataone In 9.04
Oct 16, 2010i have tried several methods to connect to internet but nothing has worked
details
ifconfig
eth0 Link encap:Ethernet
HWaddr 00:04:61:5e:ab:9c
[Code]....
Ubuntu Networking :: Configure BSNL Huawei 3G Modem With 10.04?
Oct 6, 2010how to configure Huawei 3G modem (ec325) in ubuntu 10.04, even i tried with gnome-ppp / wvdial which unable to connect, shows "ppp deamon died" and disconnected at the end of dial.
View 3 Replies View RelatedRed Hat / Fedora :: How To Configure Ethernet Card
Dec 10, 2010I have installed linux on my system. I have connected two ethernet cards in the CPU. I have then connected one cord to one card from the modem. Its working fine. I have connected another cord from the second port to the switch and there by from switch to other systems. However the system is not detecting the second card. I am a newbie to linux and I don't know how to configure it.
View 3 Replies View RelatedRed Hat / Fedora :: How To Configure New Audio Card In 13
May 1, 2011The audio chipset on my motherboard was is very new and apparently not yet supported in Linux. I disabled the on-board audio card in the BIOS and installed an old Sound Blaster 32 PCI card figuring I can surely get it to work. How do I get the OS to detect &/or configure this new card. I did some searching and found several articles saying to run redhat-config-soundcard &I don't seem to have that command on my systemHow do I configure this new audio card?
View 2 Replies View RelatedGeneral :: Making MTS Data Card Work In Fedora OS
Feb 3, 2011I purchased a new Desktop PC and MTS MBLAZE data card. It works in Windows XP OS. To make it work in Fedora GNOME OS how can I proceed? Which software do I need? Where do I get it and how to download and instal it in my PC? The firm selling the data card do not have an easy solution.
View 1 Replies View RelatedFedora :: Recover Data From EXT2 Device (Card Or Image)
Dec 25, 2009I was testing a bug in F12+Acer Aspire One and its 'suspend' feature (you can probably find the thread) and I ended with my SDHC card messed up. I formatted it as ext2 (or ext3, don't remember exactly) and apparently its superblock got corrupted. For one thing there is a single file I want to recover from the card (I don't mind formatting it afterwards). I am no expert using e2fsck or fsck, that's why I am asking here. In addition I used the "dd" command to create a backup of the drive in a file (so I can start tinkering with it). What is the best course of action to recover my files? Either from the card or from the image?
View 3 Replies View RelatedFedora Hardware :: Configure Evdo Capitel Card In 13 Using Usb_modeswitch
Sep 6, 2010I am planning to shift from ubuntu to fedora and i am using Data card for getting connected to internet. My data card is working fine with Ubuntu 10.04.
I have been using usbmodeswitch to make the device to be reconized as a modem rather that a storage devices in ubuntu 10.04. i have followed this link : [url] and it worked fine now when i repeated the same for fedora 13 it doesn't works.
I have installed tcl-8.5.8-1.fc13.i686.rpm , usb_modeswitch-1.1.4-1.fc13.i686 , usb_modeswitch-data-20100707-1.fc13.noarch and wvdial. in fedora 13 it never detected as a modem. i have also tryed using # modprobe usbserial vendor=0x1c9e product=0x9e00 also but this never helped.
Fedora Networking :: Connect To Internet In F11 Using BSNL BB(Username,Password Given)?
Oct 8, 2009I have installed F11 and i found difficult toonnect to the internet where as in the windows its working fine. I am using BSNL Broad band connection.A username and the passwrod is given
View 1 Replies View RelatedRed Hat / Fedora :: Connect Bsnl Dataone Broadband With DSL Tried Above Procedure But Connection Get Failed?
May 9, 2011i need help to connect bsnl dataone broadband.with DSL.i have tried above procedure but connection get failed.
View 2 Replies View RelatedFedora Networking :: Networking - Connect To The Internet Using BSNL Broadband Connection
Mar 6, 2010I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
Ubuntu :: Install And Configure Network Data Management Protocol On Server?
Jan 25, 2010I have installed Ubuntu Server x64 in a VM (VMWare workstation) but have limited knowledge. Does anyone have steps on installing and configuring NDMP (Network Data Management Protocol) on an Ubuntu server? I would like to set this VM up like a NAS box so I can do some NDMP backup testing.
View 2 Replies View RelatedRed Hat :: 3G Data Card Installation / Configuration?
May 7, 2011How to configure micromax 3g data card. I have redhat .
View 1 Replies View RelatedUbuntu :: Android Transferring Data To New Card?
Jun 13, 2011I am not sure where to post this so i figure that general help is as good as any. I have just bought my self a 32 gb micro sd card and I want to transfur all my old stuff (apps, contacts, music) off my existing card, how do I do this?
View 2 Replies View RelatedUbuntu :: Do Bandwidth Aggregation Of Two USB Data Card
Aug 4, 2010I want to do bandwidth aggregation of two USB data card in UBUNTU.
View 3 Replies View RelatedNetworking :: 3G Data Card In Ubuntu 10.04 Not Getting Connected
Apr 22, 2011I'm trying to connect the Reliance 3G data card in Ubuntu 10.04. I've done modprobe then make settings in /etc/wvdial.conf with username and password field as empty string. But when I'm trying to connect with sudo wvdial it is showing that "Modem is not responding" and exit. However, the same procedure with Reliance netconnect+ which take a username and password, working well. Does 3G needs some settings?
View 2 Replies View RelatedGeneral :: USB Data Card Is Not Detecting In 2.6.36 Kernel
Jan 10, 2011I am using a linux FC-12 machine which is running on 2.6.36 kernel. I wanted to use the USB data card with that machine. But it is not detecting the device. I found that the modules usbserial, option, qcserial were missing. I installed them using "insmod".After that I have removed and reconnected the device. Still the OS is not detecting the device.After the reboot of the machine, again the modules related to USB are missing.
View 2 Replies View RelatedSoftware :: Using RHEL5 - Data Card Configuration
Apr 9, 2011I am using RHEL 5. I have reliance datacard. I want to configure it in my linux pc. How to configure Data card in linux PC.
View 1 Replies View RelatedSoftware :: SD Card Data Recovery For Mac And Windows
Jul 26, 2010<<mod edit>> advertising deleted
View 1 Replies View RelatedUbuntu :: How To Configure Capture Card
May 4, 2010I have a capture tv card in my pc, but i can't configure it. It's a TV Tuner PRO ENLTV-FM Encore Electronics. I have all the System Requeriments and I've downloaded a program called MeTv to use it, but it's not working. The message that i have of this program is:
Code:
There are no DVB Tuner Devices
I've read on the net that I have to alter something in the kernel called bttv with the
[code]....
Ubuntu :: Can't Configure Sound Card?
Dec 18, 2010Actually I had solved this problem back to 8.10, but now on maverick, none of the tricks have worked. Either I have a low sound and the speakers keeps going on with the headphone plugged in, or there is no sound at all. On this thread:Quote:http://ubuntuforums.org/showthread.php?t=995940I had it solved, but now, none of this configurations seems to work, and something has changed as you can see, this was my old aplay -l list:Quote:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
[code]....
Software :: Memory Card Data Recovery Program?
May 18, 2009A friend of mine asked me to try and recover some photos she deleted by accident on her SD memory card. Normally, I would flip over to my Windows box and do this, but I'm wondering if there is a Linux equivalent to a Windows data recovery program. I'm running Fedora 10.
View 2 Replies View RelatedOpenSUSE Multimedia :: How To Configure Sound Card In 11.1
Sep 8, 2010How to configure sound card in opensuse 11.1. I tried some of the solutions like alsaconf but its not working .... Also please tell me how to find model of sound card that I have in my laptop. Laptop that I am using is DELL inspiron15r, core i5.
View 1 Replies View RelatedUbuntu :: Configure Wireless Card On Bt4 On Virtualbox
Mar 27, 2010lenovo r500, intel wireless card : iwl5100.i installed backtrack pre 4 on virtualbox ose.i have ubuntu 9.10 but i cant see my wireless card...where is wlan0? how can i configure my wireless card on bt4 on virtualbox?
View 3 Replies View RelatedSUSE :: Unable To Configure Network Card ?
Sep 24, 2010We have several new DELL STUDIO-XPS machines pre-packaged with Win7 onto which we intend to load 10.3 the 2.6.22.5-31-default kernel as a dual boot.
The first test machine however is showing reluctance to reveal its NIC under SuSE. The card in question is a Broadcom Netlink (TM) Gigabit Ethernet with driver version 12.4.0.3 under Windows.
The error message I recieve under SuSE is "Unable to configure network card because kernel device is not present".
ifconfig confirms this showing only the loopback device.
The tg3.ko driver seems to be OK (although I am not sure how to interogate this file for its vesion?). It is listed under /sbin/lsmod and I have attempted a rmmod followed by an insmod but thsi seems to have no effect.
Talk on the net suggests Windows will not 'let go' of the card on a dual boot machine but this seems unlikely and I have attempted the various power down options without success.
Hardware :: Configure Radeon Video Card ?
Dec 15, 2010I have installed a 9200 Radeon (the card says 9250 on it, but computer reads as 9200) on a AMD Sempron 2500+ 64 bit,Ubuntu 10.04 Gnome 2.30.2, Kernel Linux 2.6.32-26; Samsung VGA 941BW monitor.
A friend told me if I added more RAM (512mb), the card would run properly & the graphics would be stellar.
He also told me the drivers were installed.
When I did this & started the computer, before I got to my login, a box appeared, telling me my graphics were running in "Low Mode", & do I want to configure them. When I said "Yes", it told me to restart. When I did, nothing happened & the video card is still running on "low". I checked the fglrx info, and was told "command not found".
Hardware :: How To Configure Lirc With Saa7134 Card
Dec 10, 2010how to configure lirc with my card saa7134 card=42 tuner=41 here is what i get with
cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
[code]....