Ubuntu Networking :: Setup A Mercurial Code Sharing Server On A Machine

Feb 2, 2011

I'm trying to setup a mercurial code sharing server on an Ubuntu machine but I can't figure out how to get it running. I'm setting up this server on a LAN so I don't want any security. Another thing I should mention is that I'm using Netbeans to code in Java. how use mercurial and tortoise (I've got them installed).

View 2 Replies


Software :: Setup The Mercurial Hgwebdir And Lighhtpd?

Mar 30, 2010

I try to set up on Debian mercurial shared repositories. The webserver is working and python.cgi is working also. Here is my config


server.modules = (


View 5 Replies View Related

Networking :: Setup Machine As DNS Cache Server?

Jun 10, 2009

I have set up a gateway machine in debian lenny

internet is shared to the localnetwork by using squid as proxy server Can I improve the performance if I set up this machine as DNS cache server?

What is the result if I set this machine as Primary DNS?

View 3 Replies View Related

Ubuntu Networking :: Setup A Ssh Tunnel From Machine A To Machine B?

May 29, 2010

I can set-up an ssh tunnel from machine A to Machine B:-

fred@my-linux:~$ ssh -P myport fred@myserver.homelinux.com

I can successfully logon to machine A to Machine B.

what address and port will my tunnel 'appear' on machine B? I want to send a stream back from B to A up the encrypted tunnel, not over the open network.

View 5 Replies View Related

Server :: Setup A VPN Server At Work For Resource Sharing - Connect Keep Failing

Aug 29, 2010

I need to setup a Linux VPN server at work for resources' sharing, I currently have a server running CentOS 5.4, and tried endless tutorials on the web, but to no avail, and can't find where the logs are kept for the VPN server to check where the error is. But all my attempts to try to connect keep failing.

View 9 Replies View Related

Ubuntu Networking :: File Sharing Setup Using NFS?

Aug 4, 2010

I have tried to set up file sharing using ssh, samba with no luck. I now have it set up using NFS the only thing is it is just one way and I need it both ways. I was wondering if I installed the same packages on the other pc if I could make this work both ways.

The command I used on the first pc was:
sudo apt-get install nfs-kernel-server nfs-common portmap
And on the other pc the command was:
sudo apt-get install nfs-common portmap
Or is there a better way?

View 7 Replies View Related

Ubuntu Networking :: Setup Network Sharing Between 9.10 And Vista?

Mar 7, 2010

Trying to set up network sharing between Ubuntu 9.10 and Vista. I already did this with a wired Ubuntu 9.10 desktop and my Vista laptop but for some reason my Ubuntu 9.10 wireless and Vista wireless aren't as easy. They are all on the same workgroup "MAGIC" and I can see my ubuntu shares on the Vista computer but can't see the Vista shares on the ubuntu computer. In ubuntu I go to network>windows network>MAGIC but it times out at the MAGIC workgroup part and says 'unable to mount'.


but no luck I also checked and there isn't a firewall that's in the way.

View 3 Replies View Related

Server :: Setup Samba To Allow File Sharing To: /home/kris & /var/www

Feb 11, 2011

I am trying to setup samba to allow file sharing to: /home/kris & /var/www

I am trying the command smb://192.168.*.* from my MacBook & \192.168.*.* but when I enter "kris" & password: "******" it keep's on coming up "Incorrect Username &/or Password"

Here is my conf file:

workgroup = homegroup ;put your own workgroup name here
netbios name = intranet ; this should be your own too
server string = Intranet in Kris' Room.
; hosts allow = 192.168.1


View 15 Replies View Related

Server :: Setup House Mostly (for The First Time) For Backups And File Sharing?

Jan 28, 2011

**Edit: path for mount was incorrect Distro Server: CentOS 5.5


Backround I am attempting to setup a server in my house mostly(for the first time) for backups and file sharing. It is important to me that file permissions are preserved. So its my understanding that I must use idmapd in order for this to work. As of now I'm only working with the linux distros while osx will be dealt with once these two work together. portmapper is up and running, along with lockd on both machines. Firewalls are also down on both machines for now. The server side was all setup using the GUI interface with no extra options selected. Problem When attempting to "mount -t nfs4$sharedfolder /mnt" I get an error operation not permitted with no error printing in /var/log/message. If I use "mount -t -o nolock nfs4$sharedfolder /mnt" it mounts just fine. Ive checked both machines multiple times to make sure that lockd is up and running. In the idmapd.conf file I the domain as "localdomain" for both machines but I doubt that is right; like I stated above this is my first attempt at a server. I'm assuming the problem is a whole missing step that involves some kind of id mapping server I need to setup.

View 5 Replies View Related

Fedora Networking :: How Do I Setup Samba Sharing

Mar 16, 2009

IM completly new to fedora but decided to give it a try after using ubuntu for a while,I have everything setup apart from sharing and im been fiddling for a while now.

View 1 Replies View Related

Fedora Networking :: Sharing Files And Printers With Windows 7 Machine

Dec 29, 2009

I'm having some problems with file and print sharing between my Fedora 12 box and my Win 7 box. trying to access shares on the Win 7 machine results in a "unable to retrieve the shares list" error message. I've been searching Google for a while now with no success.

View 3 Replies View Related

Ubuntu Networking :: Xbox 360 Connection Sharing - DHCP Setup

Jun 17, 2011

I have a similar problem. My ubuntu box is set up as a dhcp router for my Xbox360, my xbox can get ip and DNS information from the computer, but it doesn't seem to get the right info. The ip address it gets assigned is out of the range I've set in etc/dhcp3/dhcpd.conf.

View 1 Replies View Related

Ubuntu Networking :: Create File Sharing Between MacBook Pro And Lucid Box For Time Machine Backups?

Mar 19, 2011

I've been trying to create file sharing between my MacBook Pro and my Lucid Lynx box for time machine backups and media server purposes. I followed this guide:[URL]..Everything seems to work with these exceptions: I can see my LucidLynx box in my finder app in my Mac but only when I run these commands from Ubuntu:

sudo /etc/init.d/netatalk restart
sudo restart avahi-daemon

If I restart my LucidLynx box then I can't see anything in finder. I can't log into my LucidLynx box from finder. I don't get a bad username or password error it just tells me the connection failed. *Note if I do enter an incorrect username or password it WILL tell me it's incorrect. I've looked at this link below since some people have used it in theses forums but it's a bit dated[URL]..

View 2 Replies View Related

Networking :: Make PC Ping Each Other - File Sharing And Printing Setup

Jan 26, 2010

I have a Netopia 3000 Series Internet Gateway [URL] & windows 7(laptop) & ubuntu 9.10.
- My laptop connects to it wireless and my ubuntu via ethernet cable.
- I am trying to setup file sharing and printing. How do I go about in making them ping each other? the networking side.
I logged in the router & check and windows has ip 192.168.100 & ubuntu has 192168.1.2

View 2 Replies View Related

OpenSUSE Network :: Mulit Server Setup \ Server Machine Has No Internet?

Mar 27, 2010

I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command

ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this


View 9 Replies View Related

Ubuntu :: Setup AirVideo Server On Machine?

Oct 15, 2010

I need to set up AirVideo server on my ubuntu machine

I followed this tutorial:


However, when it gets to the ./configure part. I get this:


dump@STORAGE-DUMP:~/ffmpeg$ sudo ./configure --enable-pthreads --disable-shared --enable-static --enable-gpl --enable-libx264 --enable-libmp3lame --enable-libfaad --disable-decoder=aac
install prefix /usr/local
source path /home/dump/ffmpeg


I've tried setting the ffmpeg folder with full read/right permissions, and allowing execution.

I need this app, would hate to have to install windows just for this.

View 4 Replies View Related

Ubuntu Networking :: Samba NTFS Mount Mercurial Commit DeprecationWarning: Use Lock.release

Feb 8, 2010

When trying to commit or get status from a mercurial repository on a mounted NTFS filesystem i get the following error:

/usr/lib/pymodules/python2.6/mercurial/lock.py:71: DeprecationWarning: use lock.release instead of del locklocker = self.testlock()

I found a couple of person who had the same problem but i can't find a solution.

View 4 Replies View Related

CentOS 5 :: Setup APC Back-UPS ES 350 On KDE Server Machine?

Jun 3, 2011

installing my APC Back-UPS ES 350. I am using CentOS 5 KDE setup as a DNS Resolving Caching Name Server, I wanted increase speeds and privacy since I got a letter and didn't like that not one bit, a tv show but whatever. It is very secure now, using peerblock with Iblock List subscribed to for the one year and it is so secure that I have to disable peerblock if I want to use online banking and what not.

setup the APC unit, haven't experienced APC and CentOS is new to me, I didn't want to buy a windows server, so I used BIND instead and well I love CentOS, can't wait to really understand it a lot better, also logging into root is so nice and easy vs Ubuntu, very cool.

I also do not have a DD-WRT supported router nor a Docsis 3 modem, docsis 2, I believe this should give me a lot more speed. currently I just get 11-17Mbps, I am hoping this will bump me back up to 35-37Mbps which I get off and on but unstable.

View 1 Replies View Related

Ubuntu Installation :: Setup A LAMP Server On An Old Desktop Machine?

Jan 27, 2010

I am a total noob with regards Linux so will undoubtedly frequent this board asking some lame questions in the coming weeks. At present I am trying to setup a LAMP Server on an old desktop machine I have lying about, however there is not going to be a keyboard, monitor or mouse attached beyond the installation process. My question simply is am I best installing the server or desktop version of Ubuntu for this requirement?

I have been playing with Desktop 9.04 and found it tough to use headlessly, however understand that Server 9.04 fully supports headless access. Being a newbie I do prefer to use the GUI to make changes and generally play around, so a UI such as GNOME would be essential. Having read about I understand the best way to access remotely is to install SSHServer and VNCServer and then login over SSH and VNC into the box.My remote machine I will use to connect to Ubuntu is a Windoze 7/XP machine.

View 6 Replies View Related

OpenSUSE Network :: Setup A Samba Server On 11.2 Machine

Apr 15, 2010

I set up a Samba server on my openSuSE 11.2 machine and I can connect to it locally with the local ip and with my actuall ip. My friend however cannot. I tried to have him ping my ip and that wouldn't even work. I'm confused and wondering why it doesn't work. We share a lot of files and this would make both of our lives much easier.

View 9 Replies View Related

Ubuntu Networking :: Setup SSH To Connect To Machine Externally

Mar 21, 2010

I'm using Ubuntu 9.04 x86_64 and trying to setup SSH to connect to my machine externally. The open ssh server is already installed and I can using ssh localhost. Moreover, I also forward port 22 to my machine and check using [URL] Everything seem to be ok, but when I trying to connect using ssh -vvv <ip-address> I receive the following common error:


View 4 Replies View Related

Ubuntu Networking :: Setup A Virtual Machine On It Using Vmbuilder?

Jun 8, 2010

I am using Ubuntu 10.04, 64-bit. I am trying to set up a virtual machine on it using vmbuilder. As I understand, I need to set up bridging. If I set up br0, then I cannot get out of the machine. Even a ping to (my gateway) comes back as network unreachable. If I comment out #auto br0, then I can get out (on eth0), but i get an error from libvirt. My /etc/network/interfaces file (eth0 networking works, but libvirt does not):

#auto eth0
#iface eth0 inet dhcp
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static


View 1 Replies View Related

Networking :: Access A Windows Server 2000 Machine Using A Machine Via KDE?

Apr 9, 2010

I need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.

View 7 Replies View Related

General :: Setup A Hosted File Server For Wife's Windows Machine?

Aug 1, 2010

I would like to use an extra physical hard drive in my linux server to provide my wife a place to backup her Windows XP desktop.I am willing to format this drive as NTFS (or anything else) and have it dedicated to this purpose. I am wondering what is the easiest way to proceed?

View 1 Replies View Related

Red Hat / Fedora :: Setup And Configure A Server Entirely With Text Only Run Mode 3 On A Virtual Machine

Feb 24, 2011

I'm trying to setup and configure a server entirely with text only run mode 3 on a virtual machine so I can redo my current live server. I'm now trying to set up the firewall of the system using iptables. I've read up on it and came up with the following:

-clear all rules
#iptables -F
-set default policy rules
#iptables --policy INPUT DROP
#iptables --policy FORWARD DROP


Everything above worked for me but just out of interest I looked at my live server which was configured using a GUI. I ran iptables-save and it was pretty much the same but its port open lines read like this:

#iptables -A INPUT -p tcp -m state --state NEW --dport 80 -j ACCEPT

so finally my question is do I really need the "-m state --state NEW"? Wouldn't having that drop established connections on those ports? I'm just confused as to what exactly the NEW state is doing and would it make a difference if I didn't include it.

View 5 Replies View Related

Server :: Samba Setup - Windows 7 Host, CentOS Machine Using VirtualBox

Jun 23, 2010

I am trying to set up samba in my CentOS virtual machine that is running on a Windows 7 host. I have found a tutorial in the How-Tos on this site but I'm not sure if they are exact and I'm paranoid about messing something up. The link to the tutorial is below. Is there anything that I should do different or anything that I should be aware of? Also, once this is set up, how do I transfer files between the two machines?


View 1 Replies View Related

Networking :: Setup Network Printer To Combination Machine

Apr 11, 2010

I have two Linux machines both running Debian (I do not want Windows to be involved at all). One is a desktop and one is a laptop. I desire to connect a not-yet-purchased printer/scanner combination machine only to the internal LAN via my router (Linksys WRT54G) via Ethernet cable, or via wireless if the printer/scanner has that capability. I want to be able to print to that printer (and scan from its scanner) by only having to turn on the printer/scanner and only one of the other computers, and not have to have both Linux machines turned on in order to print and/or scan.

So my questions are:
When I look at specific models of printers, what should I be looking for in their specifications that indicates that this configuration is possible (i.e., should I be looking exclusively for printers that say they are "wireless printers" or "network printers")?The reason I ask this question: In my online searching, I thought "networked printer" or "stand-alone network printer" meant just that, but what I found instead are pages and pages of instructions on how to connect the printer locally to a Linux machine, with the associated setup to allow that Linux machine to serve print requests coming from other machines on the LAN. And that approach is not what I want to do (with the notable exception of temporary setup to validate that the printer is responding to requests for printing and scanning from Linux).

Are there particular brands, makes, or models that I would have better luck in getting to work in this manner (i.e., "better stick with HP or Xerox")? Am I kidding myself that a combination printer/scanner would work in the same fashion and still be relatively easy to set up on both Linux machines without resorting to some Windows-centric approach? Result of my searching so far (I have not worked my way through all of these in detail, but plan to): References to local printer connection which is not what I want:
Set up a network printer using cups
Set up a printer

The post inside Setting_Up_a_Network_Printer_using_CUPS that starts with "running an HP Photosmart 8450 as a stand-alone networked printer" (where is the permalink?) is as close as I could get, but I am concerned that the instructions given are specific to the HP Photosmart 8450, or specific to the HP vendor, versus for all printers that can be connected to an Ethernet network (not that being locked into HP is going to be a problem necessarily, but I would like to know why if that is the case). Linux compatible printers says "Have a look at LinuxPrinting for known working drivers for printers data base. Also buy from a linux friendly company, ie HP, Brother, Epsom." Later in that thread, someone said Definitely don't buy canon.

View 2 Replies View Related

Ubuntu Networking :: [10.04] Netgear WPN311 Setup In EVGA-based Machine

Nov 18, 2010

I should preface this by saying I'm pretty much new to ubuntu. I was a nerd back when I used windows, so I'm fairly knowledgeable about it, but I lost interest right before switching to linux, so I haven't learned much past basic navigation.

I bought a WPN311 wireless card for my homebuilt machine a while back and still can't seem to get it to work. One person told me that after upgrading to Lucid it should work out of the box but that's not the case. It seems my computer doesn't even recognize that the card is plugged in. When I open the drop-down menu to choose which network connection to use, any sort of wireless option doesn't even show up.

My machine:

EVGA 112 CK-NF68-T1 motherboard
Intel Core 2 Duo E6750
Two sticks OCZ DDR2 PC2-6400
ATI Radeon X1650 Pro
And the Netgear WPN311 in question

lspci output:


00:00.0 Host bridge: nVidia Corporation C55 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
00:00.2 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)
00:00.3 RAM memory: nVidia Corporation C55 Memory Controller (rev a1)


View 3 Replies View Related

Networking :: Setup A PXE Kickstart Installation - File (ks.cfg) Not Picked The Machine

Aug 4, 2010

I am in a VMware environment, and using RHEL 5.4. I am trying to setup a PXE Kickstart installation. For this I have configured DHCP and TFTP, made a kickstart file and shared it in the network through HTTP. My problem is that somehow kickstart file (ks.cfg) is not picked by the machine in which I am installing the OS. Although, the contents of my kickstart file can be viewed over HTTP. Please see KS_Error.jpg.


However, I believe DHCP and TFTP is working fine as I am getting the correct IP which I have set in /etc/dhcpd.conf. Also, my label 1 which I have set in /tftpboot/linux-install/pxelinux.cfg/default is working fine as I able to locate initrd and vmlinuz. Please see attached Image_1.jpg how to troubleshoot this. I need to paste any of my configuration files?.

View 14 Replies View Related

Networking :: Samba Setup - Windows 7 Host - CentOS Machine Using VirtualBox?

Jun 23, 2010

I am trying to set up samba in my CentOS virtual machine that is running on a Windows 7 host. I have found a tutorial in the How-Tos on this site but I'm not sure if they are exact and I'm paranoid about messing something up. The link to the tutorial is below. Is there anything that I should do different or anything that I should be aware of? Also, once this is set up, how do I transfer files between the two machines? Please note: I am very inexperienced in the IT field. [URL]...

View 2 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved