After waking up my laptop I get a pop up with a 'button' saying that it's connected to the wireless network. However, each time it adds another copy of the message button, so now I have about 8 and growing.
The trouble is that the button saying "Don't so this message again" doesn't actually do anything when you press it.
how to program in C or C++, but I'm pretty decent with python ( I've only used this on Windows ) and I was wondering if there was a way I can display my notifications like that as well. If you could just tell me what causes these messages to display like this I'm sure I could do some investigating of my own.
View 5 Replies View RelatedIn windows we used to send a pop up message to another computer that is connected in home network using the following command,
Code:
Netsend [username] "message"
what is the equivalent command in ubuntu..?
Transmission offers to run a script when a download is complete.
I'd like that script to create a popup message saying "Download Complete" (including the name of what was completed if possible otherwise just generic "DL complete")
I tried 'man notify-osd' and 'notify-osd --help' but it is not found.
Yet it is installed by default.
The message must stay up until clicked on so that if something finishes overnight, the msg is still there in the morning.
Today's update of IceCat (5.0) added a fantastic new "feature" - every time I visit a website I get a message(s) popup at the top of the screen asking me if I want to block cookies from the site and informing me about scripts running on the page. Even if I've visited the site earlier in the same session it asks me again. I'm OK with accepting cookies and if I want to create an exception I can do it myself from the options menu. Is there any way to disable this (about:config etc.)?
View 3 Replies View RelatedI Install Ubuntu 9.10 and I can't control Brightness, show brightness popup (Fn+F5F6) but screen brightness don't work, I install NVIDIA Driver Linux-x86_64 version 190.53, modiffed xorg.conf.
View 9 Replies View RelatedI have install ubuntu 10.04 in windows 7 but show this error message
error.jpg
When I try to log in the screen just flicker and I get back to the kdm login.
If I use console login it just turn black and after a while it get back to console and no protocol specified shows up together with xinit: giving up.
If I use root there is no problem and I can get into the desktop so it must be a user configuration problem or.....
How can I configure apache2 to show the error message in the browser? Just for the purposes of debugging, I do not want to have to open the server error log every time.
View 1 Replies View RelatedI want the guification (or similar mechanism) which, when a user updates his/her status message gives me a notification of that. How do I get this?
View 2 Replies View Relatedrencently, i move develop env from one linux machine to another, two linux have same gcc and make version, but at new linux machine make warning/error messages dont show color font.so, when make, there are all white messages, i cant focus on warning and error.
View 2 Replies View RelatedEvolution downloads the same email message multiple times from Hotmail
How can I fix this?
I am an amateur with opensuse and i have installed 11.3 today i cannot get the wireless to work it just wont even show as connected or even detected
Running opensuse 11.3 acer aspire 5520 laptop- can get a WIRED connection
/sbin/lspci= Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) = Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
/> /sbin/lspci -nnv | grep 14e4
05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
[Code]....
Entries from fstab:
Code: Select allUUID=04E2891117C6D1E8 /mnt/Movies auto user,nosuid,nodev,nofail,x-gvfs-show 0 0
UUID=22C19F6A209C7999 /mnt/Storage/ auto user,nosuid,nodev,nofail,x-gvfs-show 0 0
UUID=366C25EB7664050D /mnt/Recovery/ auto user,nosuid,nodev,nofail,x-gvfs-show 0 0
UUID=2983C8A82A5FEF6C /mnt/Down/ auto user,nosuid,nodev,nofail,x-gvfs-show 0 0
The only one that shows in PCMANFM is the Movies partition. All others listed here are missing.
I checked syslog and it looks like they all mount correctly.
This puzzles me since all of them have the same options set.
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedIt always shows a same icon, for every application which shows message tray icon. I just did some shell extension work after fresh installation of F15, nothing related on message tray. Don't know how to change it back.Dose anyone knows how to customize message tray icon for gnome-shell?
View 2 Replies View RelatedSo it snatched up this old Dell Inspiron 5100 with a WN511B wifi card. When I plug the card into the slot nothing happens and no wireless connections show up. Can someone walk me through on getting the wifi card to work?
View 1 Replies View RelatedI went to get online on my laptop this morning, and have no connection. When i click on the icon up top in the task bar, it only shows vpn connection. It does not show ANY wireless connections at all. I checked, and the enable wireless is checked. It just does not pick up any connections.
View 3 Replies View RelatedI installed the one to see if u like it than u can install the real thing. But the menu dosen't show any wireless networks??
View 9 Replies View RelatedSo I'm not really sure what it is exactly that I did but my internet just quit working. I can't connect to anything at all. I have an acer aspire 5532. It uses build in wireless but I just tried to connect using an ethernet cable and nothing happened. Still couldn't get on the internet. My wireless monitor won't even show up on the panel and I've tried to readd it and it doesn't work. I have no need for a computer without internet.
View 9 Replies View RelatedI just got Ubuntu and I feel like there is going to be a really simple solution but right now I cannot find any information on a solution. I run 9.10 desktop i386 or w/e and I have a wireless connection. The network does not show up when I go the network manager to select a network. No networks show up and all it lets me do is create a new network connection which I have no idea how to do. I think it might have to do with my device recognition, but the network is fine it is just Ubuntu.
View 4 Replies View RelatedAfter cleaning up my son's Vista desktop and backing it up, I installed 11.04 alongside Vista.
Issue #1:
Using the Ubuntu Requirements Guide, which says a minimum of 5GB is needed, I went ahead and allocated 15GB, to be safe and allow for future growth. But when it boots, I get this message:
This Computer has only 244.6 MB of disk space remaining
Ubuntu confirms that the installation took up 13+GB of space. Why is this, and how do I correct it? I would be fine with deleting the partition and starting over, but do not want to damage his Vista installation.
I don't understand why these space requirements aren't explained better or even consistent between different official Ubuntu sources. Here's one for 11.04 that specifies that "You must have at least 44MB of memory and 500MB of hard disk space to perform a normal installation." Now, 'normal installation' implies to me that everything is installed, so I don't get it.
Issue #2:
When I turn on the computer or reboot, I get this floating box:
Monitor Is Working
92.5khz 58hz
Out Of Scan Range
Change PC Setting
This does not disappear until it has booted Ubuntu, so I do not get any menu to choose between Ubuntu and Vista. Why is this and what's the fix?
Issue #3:
When I plug in his USB Wireless device, the device does not light up, there is no popup box in Ubuntu, and the device does not show up in the Wireless Settings box. How do I get Ubuntu to see this device (or any newly plugged in device) so that it can look for the appropriate driver?
My computer is Eeepc 1201N. last time after I update my fedora13,It's network Manager can't show up Wireless even searching it. I want to log in my home wireless---IP:192.168.1.1
then I use ifconfig:
[sivanyeh@sivan ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr E0:CB:4E:1C:2B:EA
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code]....
I'm trying to search for more wireless networks but i cannot find a way to make network manager search for more wireless networks. It only displays 2 wireless networks and none of them is mine, even though I've got my wireless router at less than 1 meter from my PC.
View 2 Replies View RelatedSo decided to try a fresh install as ubuntu was having issues every update for me. Regardless i can't seem to get my wireless working and i'd really appreciate some help as i have no idea what i'm doing.
Using a hp pavilion dv5 1235dx.So my network card does show up it's a broadcom 4312 pci id 4315.Installed the b43 & wl drivers but it didn't help. The hardware switch is stuck at orange but in ubuntu it would function despite this(sometimes ).
I deleted all APs in my Wireless Section of network manager. After that, the whole network manager icon disappeared. I added the icon back on the panel, but I don't think its the right one. It doesn't do the two green cicles thing when I connect my ethernet wire in. It also doesn't show any wireless AP when I left click on the icon. It doesn't even have an X mark on the bottom left of the icon when no network is detected
View 1 Replies View RelatedI have a Broadcom B4312(I believe) wireless card and installed the drivers for it, but under the Wireless tab in Network Connections, it doesn't show "wlan0" or anything similar to "eth0"(which it shows under "Wired"). I ran iwconfig and this is what I got:
[Code]....
I recently installed Lenny but have not been successful using the wireless. have previously used Ubuntu 8.04 where the wireless worked without problems (network-manager).I have also tried to install wicd but that too does not list any available networks. I have presently reinstalled network-manager
lspci:
06:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
iwconfig:
[code]...
I've read the sticky post about getting my wireless to work. Here's what I know:
Wireless LAN doesn't show up in my hardware list. But the wireless usb adapter I have (D-Link DWA-160) does show up under USB devices, with the following UDI info:
UDI:/org/freedesktop/Hal/devices/usb_devices_7d1_3a09_12345_if0
When I look at the boot.msg log I see nothing about a firmware failing to load. Does that mean I already have it?
When I try the /usr/sbin/iwconfig command I get:
lo no wireless extensions
eth0 no wireless extensions
When I try the /usr/sbin/iwlist scan command I get:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
There's a page (ar9170 - Linux Wireless) where I can supposedly download the ar9170.fw firmware that supports this device. But when I try to download it it doesn't show up in the /lib/firmware directory and I don't know why.
The system sees the USB adapter, but it doesn't appear to be working. Do I need the firmware? And if so, how do I download it-
I just installed version 11.4 on my system of a toshiba satellite l505d-es5025 64bit.My wlan will not show up at all.I installed ndiswrapper, and all of the wlan from yast.
View 2 Replies View Related