Ubuntu :: Install 10.04 In Windows 7 But Show Error Message
Sep 6, 2010I have install ubuntu 10.04 in windows 7 but show this error message
error.jpg
I have install ubuntu 10.04 in windows 7 but show this error message
error.jpg
I was trying to install Ubuntu 10.04 LTS on my windows xp. dowloaded and installed wubi. All worked well and system asked me to restart. After restart ubuntu was showing on multi boot screen, selected it. Then the system asked me to ESC installation or not, i didn't Esc. The Ubuntu screen was showing, but all of a sudden an error message saying INSTALLATION FAILED occurred.
My system
Processor: Intel pentium IV
Ram 1 GB
Harddisk:- 160 gb
How can I configure apache2 to show the error message in the browser? Just for the purposes of debugging, I do not want to have to open the server error log every time.
View 1 Replies View RelatedIm trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View Related[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View RelatedI have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
I want to download and install Ubuntu to run alongside Windows 7 in a dual boot configuration. and downloaded the Windows Installer, but when I try to launch it I get an error message which I captured and attached to this post. What's really wierd is that once the message is displayed, I can't get rid of it. Even running the Task Manager to try to close the message doesn't work. I literally have to restart the computer to get rid of the message!
Am I suppose to be downloading the Windows Installer (Wubi) to a CD first where I run it from there? If so, the instructions don't mention that. Can't I download it directly to my C: drive and then run it from there? If so, why am I getting the error message?
I tried using the Windows installer, after not having success burning the ISO to cd, and I received another error message. "There is no disk in the drive. Please insert a disk into drive. DeviceHarddisk3DR3"
View 9 Replies View RelatedGreetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedI have a Samba server conecting to a windows XP machine that is in workgroup named CLOUDLESS. I have a share folder that resides in the server that can be accessed no problem by the XP client, but I got the following error message from the syslog:
Code:
Apr 5 18:15:44 firefly nmbd[5656]: find_domain_master_name_query_fail:
Apr 5 18:15:44 firefly nmbd[5656]: Unable to find the Domain Master Browser name CLOUDLESS<1b> for the workgroup CLOUDLESS.
Apr 5 18:15:44 firefly nmbd[5656]: Unable to sync browse lists in this workgroup.
[Code]....
I receive an error mesage during install of ubuntu 10.4 while partitioning ext3 freezes at 5% then a black screen. I see the cursor but can't move it with the error message "process:304): Glib - warning **: getpwuid_r() : Failed due to unknown user id (0)", I have tried installing 9.10 and 5.0.5 Debian when I installed 9.10 ubuntu and debian it just froze and wouldn't do anything.
View 4 Replies View Relatedmessege pops up while trying to install inside windows?
View 1 Replies View RelatedI'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies View RelatedI download a few times and burned a few CD's but after I select install on hard disc or use the livecd the computer will hung up and then I have a message saying boot error, I download the iso image from 2 different sources but still not working. I'm installing on a Dell 500 with 256Mgs of memory (I have Ubuntu installed but its too slow).
View 1 Replies View RelatedI tried many times to install Ubuntu 10.04 but I keep getting the following error message:
Can't be the CD or the CD drive because I get the same thing with a bootable USB flash drive.
HDD in SATA 1 port
DVD burner on SATA 0 port
HDD formated
Vice versa does not work neither.
Mobo: Intel D945GNT
I am just now starting to go deeper than the surface of my computer so I am very much a beginner. I have downloaded Ubuntu 10.10 and have tried to install it by mounting the image and installing "inside windows." Next, upon reboot and selecting Ubuntu from the windows loader it eventually went to a colorful screen but stayed there... the first time I let it sit there for 20 minutes or so then restarted, uninstalled/reinstalled tried again... then I let it sit there for 3 hours, nothing. Next I tried to mount image and install "demo and full installation." This time upon reboot I choose Ubuntu from the windows loader menu and an error message came up. I will type it out below exactly as I see it because this is the same message that came up when a friend suggested I boot from a USB drive.
Busybox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) unable to find a medium containing a live file system
I can use Ubuntu from my flash drive, but I want to install it in a partition alongside windows. When I try to do this, I come to an 'allocate drive space' window, but whatever I do I get the error message: 'No root file system is defined. Please correct this from the partitioning menu.' I just don't know what this means, or what to do next. I'm loathe to ditch windows, and I don't want to have to use a flashdrive all the time.
View 3 Replies View Relatedi'v installed ubuntu 10.04 on 3 different desktops and 1 laptop. It has gone flawlessly on all 4. i a want to install it on my hp to dual boot(the others i just wiped the drives) but when i tell it to boot from the cd at first it looks like it might work, with the purple page, but after a few minutes, before i get to the install options i get an error message. my current operating systime is windows and i have an hp pavilion. with 2.5 gigs of ram and a descent graphics card.
View 3 Replies View Related10.04 new isnstall from cd goes for a minute then I get this error message:
old p3 800 machine, will this distro work on an old machine like this:
BusyBox v1.13.3(Ubuntu 1:1.113.3-1ubuntu11) built-in shell(ash)
Enter "help for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/o-put error
Cannot mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
(initramfs)
Been trying to install and uninstall some programs but keep getting the following error message:
View 1 Replies View RelatedI would like to install Windows as 2. O, but when I insert the original WindowsXP SP1, it loads up the files on the disc, and after that, a blue screen shows up, telling me, i have to remove viruses and the setup breaks down. I also tried it with Windows XP Pro, but the same problem.
Here is a Pic showing the exact Problem, except the upper part: PAGE-FAULT .... isnt there:
I have just recently installed opensuse 11.2 (on a seperate hdd) on my file server. I have a highpoint rocketraid card in the system with 4 x 1.5tb HDDs. I'd like to get my RAID5 showing up without loosing any data? Is this possible??I have been following this post over HERE
/proc/partitions
major minor #blocks name
8 0 1465138584 sda
8 16 1465138584 sdb
8 32 1465138584 sdc
8 48 1465138584 sdd
[Code]...
Any time i try to install anything from terminal or synaptic i get this error message saying:
Or if i try to upgrade:
If i try to open the software-center the cursor changes but it does not open. This all started when it upgraded to Karmic Koala. There might be two seperate issues but i cannot install or uninstall at all.
3/4 of the way through the install the reboot black screen : The disk drive for / is not ready yet or not present continue to wait; or press S to skip mounting or M for manual recovery . neither works, was running Ubuntu 10.4.
View 1 Replies View RelatedDuring installation of ssh I get an error message regarding dependency problems.
Dependency problems prevent configuring of ssh.
Running 11.3 64 bit updated to kde 4.5.4I noticed when booting yesterday the following error message is shown:-
[ 17.688956] end_request: I/O error, dev sr1, sector 4294180608
[ 17.696944] end_request: I/O error, dev sr1, sector 4294180608
[ 17.702846] end_request: I/O error, dev sr1, sector 4294180784
[code]....
I was trying to install a newer version of Firefox and thought I would just try to install the newer RPM for Fedora without doing anything else and this dialog message appeared.
Could not do simulate: Can't install /home/kbs/Downloads/firefox-3.6.4-0.4.build6.fc13.remi.i586.rpm as no transaction
I've just installed a second hard drive in my laptop with windows 7 on one drive and Ubuntu on the other. I selected the side-by-side install in the Ubuntu install and let Ubuntu do the rest. Unfortunately Grub isn't seeing the windows install even after reconfiguring grub. However, the windows 7 drive is visible in Ubuntu and all the windows files are there intact.
Does anyone know how I can make grub see Windows 7 so I can boot into it?
Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic