Software :: Pidgin - Guifications Show Status Message Update
Oct 31, 2010I want the guification (or similar mechanism) which, when a user updates his/her status message gives me a notification of that. How do I get this?
View 2 Replies
ADVERTISEMENT
Ubuntu :: Twitter Status / Update Pidgin Status In Lucid
Jul 5, 2010I have just upgraded to Lucid on Ubuntu. I am a long time Pidgin user. I tried using Empathy with Gwibber, but I can't get Gwibber to update my IM status(es) in Empathy, so I want to go back to using Pidgin. (Additionally, I can't get Skype to work with Empathy.)I installed pidgin-microblog and pidgin-mbpurple, and they allow me to view my Twitter feed in Pidgin and update my Twitter status in Pidgin. However, in Karmic, I was also able to specify certain "status availabilities" (one named "Twitter-Available" and one named "Twitter-Away", for instance) to have the IM status message for these statuses become populated with my Twitter feed. This capability seems missing in pidgin-mbpurple in Lucid (and it seems to be the only thing missing from Karmic).
Is there a way to have pidgin-mbpurple update certain "status availabilities" in Lucid (and I'm just missing something) or is this no longer possible?Equivalently, is it possible to have Gwibber update my status message in Empathy? (I just want to be able to update my status once on one of my three computers - and have it propagate to all my other accounts (IM and social networking) and computers).
Ubuntu :: Hardware Driver Status Update Message On Panel For Hardy
Jul 3, 2010reason is if someone installs the ATI driver, it will on boot give a white screen, the FGLRX driver wont work on this pc. (already doing second install of OS due to this issue)
View 2 Replies View RelatedUbuntu :: Can't Update Packages Due To Some Fail Conflict Between Pidgin And Pidgin-facebookchat
Jan 5, 2011I have a Kubuntu 10.10 install on which I can't update my packages due to some fail conflict between pidgin and pidgin-facebookchat. I can't even remove the stuff via apt-get due to this conflict...
sudo apt-get remove pidgin
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
[Code]...
Ubuntu :: Pidgin Disconnects On Status Change?
Feb 20, 2010I'm currently using Pidgin 2.6.2 on Karmic. Status changes work fine if I change it in Pidgin, but if I use the user switching applet to change my status is consistently disconnects my connection to Windows Live (but not AIM or GTalk), claiming that I have "signed on from another location". A quick Google and forums search turned up nothing.
View 3 Replies View RelatedUbuntu :: Can Pidgin Show Notifications When In Irc
Feb 24, 2010I use pidgin for IRC regularly and am wondering if there is a way for it to show notifications when others talk?
I have "others talk in chat" selected for the sound notifications, but I'd really like it to use the visual notifications (the notification applet?), like it does when I'm chatting with someone over IM. Is that possible?
I'm running standard ubuntu 9.10
General :: Pidgin IRC Direct Message To A User
Jun 13, 2011I notice that when people message me in a channel the message itself show up in the channel, but I also get notified from pidgin that I got a message. Now my question is, how do I send a message to a specific user so he gets notified like I do, but still the message show up in the channel. I know It's not Linux specific question, but IRC is in Linux culture anyway, and I been googling but for no solution at the end.
View 3 Replies View RelatedOpenSUSE :: Can't Get The Pidgin Tray Icon To Show
Sep 21, 2010Just updated to KDE 4.5.1, and im having a hard time getting the tray icons to work.
For instance, i cant get the Pidgin tray icon to show. I cant get Qinternet to show either.
Ubuntu :: Pidgin To Show Me The Account Who Just Comes On-line?
Mar 21, 2010I use pidgin to chat for my yahoo account. When some one comes on-line I can know that by the sound. I want pidgin to show me the account who just comes on-line, like the feature of yahoo messenger. How can I do that?
View 1 Replies View RelatedUbuntu :: Status 4 Message On Adding HD To Fstab
Apr 23, 2010I have an external hdd that I have added to the fstab so it will mount when I boot. But every time I add the line to fstab and reboot, it hangs during the boot process and says something about ureadahead-other status 4.
Here is my line in fstab..
/dev/sdc1 /NAS ext3 defaults 0 0
I couldn't remember what fs I chose when I formatted it so I did "sudo parted /dev/sdc print" and it said it was ext3.
General :: Bind9 Status - No Response Message
Aug 3, 2010I'm trying to figure out on why when I do a: service bind9 status This doesnt display anything in my command. Should be: Status of Bind9 server: bind9 is running. But this doesnt display at all.
View 8 Replies View RelatedUbuntu :: 10.04 - Trash Icon Will Not Show Empty Status
Jul 1, 2010This is just one of those annoying but superficial things: When I empty my recycle bin, the items fully delete (as far as I can tell) but the icon for the trash remains a full trash can. I have 10.04
View 5 Replies View RelatedServer :: Finding A Program With A Web Interface To Show Hardware Status?
Dec 11, 2010I am looking for a program with a web interface to show my servers hardware status. hdd usage, cpu load, memory etc.
View 9 Replies View RelatedServer :: Program With Web Interface To Show My Servers Hardware Status?
Jan 30, 2011I am looking for a program with a web interface to show my servers hardware status. hdd usage, cpu load, memory etc.
View 2 Replies View RelatedSoftware :: Wireless - Status Message That My Wifi Is Enabled But The Led Indicator Does Not Glow
May 4, 2011I am on a DELL Latitude 6500 laptop. It has a physical button to enable wifi. On Kubuntu 10.10 it was working perfectly. Now that I have made a fresh install to 11.04, whenever I try and turn the wifi on, I get a status message that my wifi is enabled. But the led indicator does not glow. and I could not find my router nor any other routers in my building. The following is some of the that might be useful to debug.
According to this website [url] the wifi is compatible with ubuntu and does not need any external drivers I guess.
Ubuntu Servers :: Smbd Not Running - Reinstall It But Still Giving The Erroneous (?) Status Message ?
Feb 3, 2010Here's the background info -- I recently installed Ubuntu server 8.04 on TWO machines that are exactly identical.On one machine, all seems perfect.On the other, when I execute "/etc/init.d/samba status" it always shows that smbd is NOT running.But it would seem that it IS running, since I can access the shares I've set up without difficulty either from smbclient on the server or from the windows boxes on the network.ps ax lists smbd as a process as well.The log tells me nothing -- it just reports that samba started. No errors. Not much of anything in there. And if I execute smbstatus, that works just like you'd expect.since the two machines are identical (and I mean exactly the same), and only one is doing this.
I guess I should be happy since they both work (seemingly perfectly).But it still bothers me that I'm getting the message that smbd isn't running on one of them. I tried uninstalling samba and reinstalling it on the machine giving me the erroneous (?) status message. But that changed nothing.Right now there's no data on the machine, and it's not in production, so just doing a bare metal reinstall of the OS is an option. But I'd like to understand what's happening.
Ubuntu Installation :: Error Message Meaning - 'unexpectedly Returned With Status 0x0100'
Dec 10, 2010I'm working on a friend's Samsung R530, Intel Core i3 3330M (T430) processor. It had Windows 7 installed, which crashed so I'm trying to recover the files before installing Ubuntu (the recovery partition is gone, there was no facility for making recovery disks and Samsung won't send any out). I put in the Live CD for 10.04 which took ages to load and then gave me the following error message:
udevd (90): worker (181) unexpectedly returned with status 0x0100
udevd (90): worker [180] failed while handling '/devices/pci 0000:00/0000:00:00:00'
which was repeated for [182] and [230] then it all went blank for ages then I got a message saying eject the cd and press enter, just like you do at the end of an install. However, I didn't get an option on whether to boot from the cd or install ubuntu. anyone got any clue what the error message means? and am I correct in thinking that the cd tried to install ubuntu? I've tried 3 different live cds, all of which have previously worked on other machines so I'm pretty sure it's not a cd issue.
But I can't get a single one of them to boot from cd and all throw up the same error messages, except the 9.04 cd, which just hangs. Have also tried a USB live image and got a disk error message. When I try booting from the HDD I get OS not found, boot from cd. Which is not entirely unexpected because of the previous problem with windows but it also seems that Ubuntu hasn't actually installed, or if it has then there's been a problem and it hasn't done it properly.
Slackware :: Pidgin 2.7.6 Update For 13.1?
Nov 23, 2010does anyone knows if an update of pidgin will appears on the 13.1 branch ? I guess it will be updated on the -current branch but for now there's that SSL certificate error that flood the screen with popups...
View 12 Replies View RelatedUbuntu :: Pidgin 2.7.1 Not In Update Manager?
Jun 1, 2010There's a new version of Pidgin on the pidgin website but it's not available in the update manager. I've tried checking for updates but nothing... how to install the update? I have downloaded the source from the site "pidgin-2.7.1.tar.bz2" but no idea how to install it.None of the "make" "make install" "sudo make install" or any of that sort works.
View 3 Replies View RelatedUbuntu Servers :: Every Time Logged In Via SSH Got A Message Telling There Where Packages To Update Including A Security Update?
Feb 11, 2011I was running 10.04 LTS and had decided to stick to the LTS versions as I'm now running my machine as a server and don't want to be updating regularly.Every time I logged in via SSH I got a message telling me there where packages to update including a security update. So I did a search to find out how to perform an update on Ubuntu server from the command line.What I found was to do this:sudo apt-get updatesudo apt-get dist-upgradeAfter doing that I rebooted but now my machine gives me this message:
init: ureadahead-other main process (794) terminated with status 4Your disk drives are being checked for errors, this may take some timePress C to cancel all checks currently inprogressI'm not pressing C yet and leaving it alone to finish, but I noticed when the machine booted that one of the options for booting talked about Ubuntu 10.10, so I'm worried that I've updated from 10.04 LTS to 10.10 by accident?
Ubuntu Installation :: Using The Update Manager Fails And See The Message Cannot Update?
Oct 26, 2010I'm having trouble updating. Using the update manager fails and I see the message:dpkg: parse error, in file '/var/lib/dpkg/available' near line 23288 package libbonoboui2-common': 'Conflicts' field, reference to 'libbonobous2-0': version contains ' '
I've tried
sudo dpkg --configure -a
and
[code]....
Slackware :: Latest Pidgin Update Seems To Have Broken Dock Icon / Fix It?
May 22, 2010Running 12.2 on fluxbox, it seems the latest pidgin update has messed with my dock icon- it's no longer the pidgin icon, now I believe it's a generic one. It's not REALLY a big deal, but it kind of bugs me...
Where is this set/how do I go about fixing it?
Ubuntu :: Install 10.04 In Windows 7 But Show Error Message
Sep 6, 2010I have install ubuntu 10.04 in windows 7 but show this error message
error.jpg
Debian Multimedia :: No Protocol Specified Message Show Up If Using Console Login
Dec 19, 2014When I try to log in the screen just flicker and I get back to the kdm login.
If I use console login it just turn black and after a while it get back to console and no protocol specified shows up together with xinit: giving up.
If I use root there is no problem and I can get into the desktop so it must be a user configuration problem or.....
General :: Configure Apache To Show Error Message In Browser
Jan 31, 2011How can I configure apache2 to show the error message in the browser? Just for the purposes of debugging, I do not want to have to open the server error log every time.
View 1 Replies View RelatedSoftware :: Why Gcc Make Warning Message Don't Show Color Font?
Mar 16, 2009rencently, i move develop env from one linux machine to another, two linux have same gcc and make version, but at new linux machine make warning/error messages dont show color font.so, when make, there are all white messages, i cant focus on warning and error.
View 2 Replies View RelatedOpenSUSE Install :: Get An Error Message That Basically Says:kernel.desktop - Unable To Install, Exit Status 127.I?
Apr 28, 2010I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies View RelatedCentOS 5 :: Sendmail Occasionally (rarely) Rejects A Message With A "User Unknown" Status?
Mar 23, 2009I use ldap to provide account and home directory services for sendmail.Unfortunately,sendmail occasionally (rarely) rejects a message with a "User unknown" status when the user is a legitimate user that has routinely been recognized in previous messages.I have not yet found a reason to suspect that the ldap server is failing to respond properly or in timely fashion to queries.However, since I believe this information is cached by nscd on the local mail server, I am suspicious that the problem may rest with nscd and its database.Is anyone aware of rather random failures to obtain correct information from an ldap query that is actually related to nscd?Also, I decided to just treat nscd as an application for purposes of this post
View 2 Replies View RelatedServer :: Insert "show Interface Status" Output To A Client Side Webpage?
Nov 16, 2010I need to show an output of the command "show interface status" executed on a server side in new window on client side. In other words: on client side web browser page I would like to have a link which I can click and get output of command "show interface ... status" in a new window. On web server script has to connect to switch/router, execute this command and send output to client window.
where to look, and, may be explain, what can be better for this purpose? I need a clue, because I have newer done it before. It should not be snmp, because I want to view many different outputs and snmp wont help me.
Ubuntu :: Missing Status Update Box In MeMenu?
Dec 8, 2010Missing Status Update Box in MeMenu
View 2 Replies View Related