I saw numerous posts here on different programs people like to edit video and some of them are able to create slide shows. What slide show software is best on ubuntu? I cant figure out how to use them. It seems like they are embedded in the video programs. I understand the video stuff, but I dont see the slideshow options other than fade in/out/etc.
View 2 Replies
In my Gnome 2.32.1 running in opensuse 11.4, when I go to select wallpaper for my desktop, one of the options is a space-based slideshow. The files reside in /usr/share/backgrounds/cosmos. When I go there, there are the jpegs with an xml file that seems to controle the slideshow. Is there some kind of utility for creating this xml file? To create one manually, especially with a lot of pics, seems kinda cumbersome.
View 1 Replies View RelatedDoes anyone have a solution that actually works for creating video DVDs from beginning to end? My requirements are pretty simple, I would think. I need to take video from an NTSC DVD (which I made from 8mm analog tape), edit it, create a menu, and burn it. It doesn't have to be fancy. It just has to work. The total project is a little over 1 hour of video. I have reasonable computer power for this.
That doesn't seem like such a difficult task, but it actually requires using up to four different mutually incompatible programs, each of which has nearly infinite options, a huge number of intermediate file types, and infinite ways to fail. If there are intermediate files to be written, I need to know EXACTLY what files and formats to use, and what packages must be installed to use those formats. I don't care if the programs are KDE or Gnome (even a command line might work if the procedure is clear-cut).
The task consists of four parts:
* Rip or import an ordinary video from DVD. (This was made by a hardware DVD recorder).
* Edit videos. Create clips, cut, past, move, fade.
[code]....
I'm looking for a good video editor for after I make a video. I'm currently using gtk-record desktop, and I don't have a problem with that. It's when I use Pitivi that I actually can't edit the video or render it correctly. How to render the actual project. I'm using 10.04.
View 7 Replies View RelatedI've been looking for a good, easy to install, video editor. All searches thus far have lead into blind install alleys. All I want to do at this point is edit, cut, and paste AVI and MPEG4 files.
View 4 Replies View RelatedI'm not sure this is the cause, but after I changed the properties of gstreamer, by following a fix on VLC freezing during video playback, I cannot control my desktop anymore.Luckily I can still switch windows thanks to docky. Unfortunately I cannot change the tab in the gstreamer-properties so I can reset my change. I changed the video from default to X11.How can I edit it manually from the command line?
View 2 Replies View RelatedAre there any media management programs available for video files?
View 3 Replies View RelatedWhat are the best GUI programs to split / chop a video file of 60 minutes into six 10 minute videos?
View 2 Replies View RelatedI'd like to edit a few frames from some videos, and then return them to the video stream for playback. What are the best tools to do this with?
I tried exporting a frame with Kino, editing with GIMP, and then re-inserting it into Kino, but Kino rejected the attempt.
Will Kino do this, or do I need to be using something else?
I'd like you to know that I'm completely new to ubuntu. Just install it a couple of days ago. I have a bit problem with startup here, everytime I change anything in System > Preferences > Startup Applications it just keep coming back to default. I unchecked Penmount Utility, and it's checked again after next boot. Same thing happen when I add Guake Terminal. When I reboot, it's not there anymore. So basically, it seems that I can't configure my startup programs.
View 3 Replies View RelatedIf I download and install an icon theme in 10.04, but for certain applications would prefer the "default" icon, how would I change that? I noticed that if the theme doesn't have a "custom" icon for a program, then it does use the default one.
View 7 Replies View RelatedI am looking for a way to edit the default programs the mailon, included with the indicator applet, on the task bar uses. More specifically, I would like a way to integrate "checkgmail" instead of evolution.I did:Code:locate indicator-appletand it printed several possible files, none of which look like they could be edited in this way
View 7 Replies View RelatedAfter installing Fedora 12, all of my programs are missing the top menus such as File, Edit, and like wise I haven't been able to figure out why this is, since it has never happened before.
View 5 Replies View RelatedWhere is the location of file which holds information about open with dialog? I need to edit it to change default programs that open certain files?
View 3 Replies View RelatedI'm completely clueless when it comes to hex editting. I'd like to know if it's possible to hex edit a few Windows programs in order to remove the advertisements from them. I dual boot Windows for gaming and run some open source software in it as well..
View 5 Replies View RelatedI'm back again to admit my ignorance! Received a .ppt slideshow and saved as both .ppt and .odp. What I want to do is save individual slides as some are not required. This seems impossible as clicking on individual slides does not seem to allow for copying. Am I flogging a dead horse?
View 1 Replies View RelatedI was able to download this ..... video and I would like to edit it using Avidemux. There are subtitles on the video but I just want to edit the subtitles if possible.
I want to take out the foul language text (subtitles). Is this possible?
Video is in mp4 another one is in flv format.
Is there a video editor that also allows me to edit the audio. For example I have 2 videos and want to take the audio from one clip and add it to the other clip. I have tried Avidemux and Pitivi but these don't seem to have this ability.
View 9 Replies View RelatedI am new here and new to Ubuntu as well. I have been using it for about two weeks now.
Here is my dilemma. I have a Kodak Playsport video camera that can record in 720p @ 60fps for action/sport type stuff. I have used it many times and am able to preview, import, and make movies/edit the video in Windows 7.
I tried doing the same in Ubuntu 11.04 using PiTiVi a couple of days ago. When I try to preview the clip, I get sound perfectly, but the video plays more like a slideshow with very big gaps. What can I do do rectify this?
I wanted to make a video and edit it all together with special effects and all that good stuff, bells and whistles, I want something like Windows Movie Maker, or better, im not a pro at this, back when I was 16 I was pretty damn good but its been a while, I have downloaded a few different editing softwares that I have come across and im not happy with any of them, such as:
Avidemux
Pitivi
LiVES
now Pitivi comes standard with the newest install of ubuntu, but it sucks, sorry, its has nothing, or im missing something, and for LiVES I just cant seem to get it to do what I want, its very confusing, I just want something with a simple UI like WMM or something along those lines, it doenst have to be linux based, but if your going to give me something that doenst work fresh install,
I recorded someone using a VCR (tape) camcorder-it was all I had available. I've now recorded/transfered the tape to DVD format, so it's now digital instead of analog. I want to edit the file and separate it into smaller files. What's a good program to use?
View 6 Replies View RelatedI just have bought a video editting software,but when I use them to convert the format what I want,there is something wrong,I don't know how to settle it,can you
View 5 Replies View RelatedI have been using this app on my Mac to edit video. I find it very easy when I want to save snippets of video. Is there a similar app for Linux Ubuntu. I am not looking for something like iMovie because that is overkill for what I am doing.
View 2 Replies View RelatedI'm wanting to back up my kids' DVD collections because lets face it: DVD's and frisbees just look too much alike.......Anyway, I can rip the DVD's fine (usining k9copy), but 5GB seems excessive to me for a 1:1 copy.
I'd like to know what other people are using to shrink final file size. Also changing file formats from .aviso that I can just use these same files on the little personal video players the kids got for Christmas would be great. They support a number of file types which escapes me at the moment.
I recently upgraded from fc8. I am running two nvidia NVS 285 cards with four monitors and using nvidia driver 190.53-pkg1. I have one card up and running and can edit the config file and make to other two work I just can't get all four to work together.
View 3 Replies View RelatedWhat programs can be used to test and find faulty memory (RAM, Video adapters, cache)?
View 2 Replies View RelatedI want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies View RelatedI have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies View RelatedWhen I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
is this possible? Or does one have to use the binary blobs?
View 1 Replies View Related
