Ubuntu Multimedia :: Fglrx Needs To Be Reinstalled After Every Kernel Upgrade
Feb 17, 2011
Every time the update-manager decides to upgrade the kernel my graphics driver is ****** up. I have had this problem in 10.04 and now in 10.10. Now I get dropped to the command prompt after an upgrade (I can also log in with fail-safe/low graphics mode). The problem is solved if I reinstall the package fglrx so nog big issue but it is rather annoying. What could be wrong? I am using ATI HD4770. I haven't tried open drivers yet.
I recently upgraded 9.10 to 10.04. I have Nvidia 9400 GT which drivers I had to reinstall after upgrade. Initially it was lot of work to get the drivers working on 9.10 and who knew for 10.04 it was even harder for me. I was trying to install this version NVIDIA-Linux-x86-195.36.24. followed basic steps like quiting X server first, backing up and then removing xorg.conf file then rebuilding it etc etc ..
After all that, reboot and resolution messed up. My original resolution was 1600x900. Now its on 1024x768 and I tried absolutely everything what is discussed on Linux forums to fix it but no luck at all. Now about error msgs. When computer starts window pops up saying "Fail to initialize NVIDIA kernel module. Please check your system kernel log ...." Then it gives me some options where only two works 1) restart X 2) Load ubuntu with low resolution. Both of these options bring me to 1024x786 mode.
Second error msgs: when I go to 'NVIDIA X server settings' window pops ups saying "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." When I go to Preferences > Monitor this msg pops up "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?" and it tells me that it can not recognize monitor even though it did before I tried to install drivers.
Here is my xorg.conf file (I tried to add some lines to it so it might be little different. I still have original which does not work either).
Code: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at nvidia site.
I have an ATI radeon HD 3400 series video card, and the open-source drivers make my computer run really hot. I tried installing FGLRX by using "Check For New Hardware Drivers", but it did not work, so I installed the ATI catalyst 10.5 package from AMD's website, and am using Xserver-xorg-core-1.7.6-2ubuntu7+backclear1 from k0ekk0ek's PPA so there is no lag when minimizing windows and such.
Everything was perfect until the 2.6.32-23 kernel update came along. I let it update, and rebooted, but the ATI driver no longer starts, even when I uninstall and reinstall it.
I am just using the 2.6.32-22 kernel for now, as the 2.6.32-23 kernel still runs hot without the ATI driver enabled. I would like to start using the new kernel at some point...
I have an HP tx2500 tablet pc running 9.04, which I was trying to configure the tablet for using the .fdi method on this page. After I redid the .fdi file, I rebooted, and it gave me a flashing screen, similar to the one i got when I tried to install 9.10.
I tried going into recovery mode and using xfix: bad idea. Then, I tried installing envy and reinstalling the drivers from there. That failed as well.
So now, when I try to manually remove the ati packages,(from command line in recovery mode) it doesn't let me, because of some problem with "fglrx-kernel-source" I can't configure, remove, or purge.
I have a HP Pavillion dv5 laptop with an ATI Mobility Radeon 4200 series. It always worked fine with Ubuntu for as long as I can remember. However, at one point, something happened and truly made a majestic mess of things. It might've been extra repos I enabled with Ubuntu Tweak - I do not know. But something made it so that my system would not boot any longer.
And when I say "won't boot", this is what I mean:
- Durning a normal bootup, any entries (except Windows) selected with GRUB (or BURG, not even sure which one I'm using anymore) will spawn the Ubuntu loading screen.
- then try to start X (or GDM) 5 times. The screen goes to dark, black and back to the Ubuntu loading screen. Then it just stays there until I spawn another TTY.
I have no idea what is happening or why. There are no errors in my logs, and I'm truly at a loss here.
I've linked three files: Xorg.0.log, the output of dmesg and the GDM log:
A kernel update just killed my ATI graphics driver.
Trying to install proprietary graphics driver fails and points at /var/log/jockey.log
This ends with
Code:
If I can't sort this out I'll have to try rebooting into the old kernel to get the graphics driver back. The dreadfully slow scrolling in the browser is starting.
Posting from my Windows 7 system. Once again an Ubuntu kernel update has broken X. Once again I cannot get into Grub2, despite putting in the hacks to lengthen the time it listens. I don't need instructions on how to fix it from Live CD. I'm going to try Gentoo or something, anything, different. I need a Linux distro that can survive regular updates and boot to desktop reliably.
I'm using Ubuntu 10.04 LTS. I'd like to use the latest kernel from repositories (at the present moment it's 2.6.35-23), that's why I've installed backports.
These are packages:linux-image-generic-lts-backport-maverick linux-headers-generic-lts-backport-maverick
But DKMS failed to build modules for fglrx: I think it's caused by old version of fglrx.
I am currently having an issue installing the FGLRX driver in slackware 13.1. I use a customer kernel due to buggy acpi on my toshiba laptop. The steps i took to compile my kernel are as followed. hu
make mrproper in /usr/src/linux directory patch /usr/src/linux directory copy kernel config from /boot directory make menguconfig and load config the make all make modules install i have also tried make install as well then i mopy system.map the kernel file and config file into /boot directory edit lilo reboot ... everything works fine acpi works properly like before.. now the problem comes.. I try to install the fglrx drivers and i get the error message Code: Error: kernel includes at /lib/modules/2.6.33.4-smp/build/include do not match current kernel. they are versioned as "" instead of "2.6.33.4-smp". you might need to adjust your symlinks: - /usr/include - /usr/src/linux ERROR: I don't have make module Am I doing something wrong setting up my kernel. Issue on my gentoo box I have.
I am running 8.04 on a Toshiba Satellite A100 laptop. (My Toshiba model is unfortunately the one with the Phoenux BIOS)I have been happy with 8.04 LTS for quite some time now and was thinking of upgrading to 10.04 LTS, which the Update Manager says is available. I normally choose to upgrade a few months after release once things have stabilised a bit. I figured it was now time for 10.04.I accordingly have first taken all the updates for 8.04 and brought it up-to-date. Then when I click on Upgrade, I get the following messageUpgrading may reduce desktop effects and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardwarein Ubuntu 10.04 LTS.
Do you want to continue ?Since I wasn't sure of the exact entire implications, I said NO and exit the upgrade at that point.I then googled a bit and found this to be a pretty serious installation issue with a number of people who unfortunately have ATI display cards.But then I came across this page:Does the above link mean that this problem is now solved with respect to 10.04 as well ?Also, if not, what are the implications for me ? Does this mean I have to be stuck on 8.04 only ?If I choose to upgrade anyway, what display functionality will I lose ?I don't need Desktop Effects or other toys. But I do use GIMP quite a bit and also watch videos in multiple formats. Will I not be able to do these ?
When I first did the upgrade to Natty, no desktop at all would start. I could only get a text terminal login prompt. Log showed a segfault in fglrx module: "firegl_SetSuspendResumeState" I found instructions to remove the fglrx module and install the default ATI driver. Now I get a graphical login screen. But I must only login with "Ubuntu Classic (No effects)" in order to get a desktop. If I select Unity or Ubuntu Classic, I never get taskbars or menus and can't run any apps. So Natty Narwahl is a big step backwards for me. What is the relevant information to provide? The display driver is listed as RV710 [Radeon HD 4550] from ATI Technologies Inc.
Karmic ( kernel 2.6.31) does not support my TV card:
Code:
~$ lspci -vnn
Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133]"1131:7133" is nowhere present in the 2.6.31 SAA7134 cardlist. However, "1131:7133" is supported as card 17 under a different card name within kernel 2.6.33, see
HTML Code:
[URL]
Where do I look for guidance on such a kernel upgrade? My impression is that grub permits booting to an earlier kernel so a boo is recoverable. While not particularly relevant, my card is a Chronos Video Shuttle II.
I borked my perfectly good 11.2 install, while replacing a failing hard drive. I reinstalled, and now my sound doesn't work - or not quite. I get the left front channel, nothing else. Battle Duel crashes due to sound errors - or I probably wouldn't care.
I've been reading about a temporary solution to the kernel/Fglrx issue caused by the last kernel update, but I haven't read about any permanent solution to this issue. Anyone know anything about a permanent solution (new kernel update?, new Fglrx driver?) to this compilation error?
I have an HP laptop running 11.3/KDE4.5.2, has integrated HD3200 ati graphics.
Yesterday, ATI version 10.10 fglrx driver was installed on the system, kernel was 2.6.34.7-0.4-desktop. I use the "build rpm" option with the downloads from ATI. All seemed running well.
I had installed the automatic recompile script posted by please_try_again after moving to 2.6.34.7-04, so today's new 2.6.34.7-0.5-desktop update was a chance to see it in action.
After the update and reboot, the X server restarted so I have to assume the automatic recompile script ran, although I did not see any messaging (place to look?).
However, some things did not seem "quite right". fgl_glxgears ran, but seemed slow (only 70 or so fps) pm-suspend failed to sleep the machine, I see the error message "s2ram_do: Device or resource busy" in /var/log/pm-suspend.log, which I think (?) is fglrx related but not sure why I think that. I moved to a root terminal, init 3, removed the fglrx rpm with yast, deleted the fglrx rpm and rebuilt a new one with ati....run. I then installed the new rpm (with yast), ran aticonfig --initial, then rebooted.
Basically, I am at the same level as above, fglrx installed and running, but slow and pm-suspend still not working.
So now I wonder if there is a new problem with the -5 kernel update, something like the excitement a couple weeks back when we had to patch the driver (or the kernel symbols) just to get a compile.
Can i assume someone has been able to cleanly update to 2.6.34.7-0.5 and get their fglrx running again?
An observation, which may or may not be related to my issues. The fglrx rpm installs a new /usr/lib64/dri/fglrx_dri.so, but in reviewing the log file /var/log/Xorg.0.log, it never appears to load. Two other *dri*.so modules do load. There is no "dri" section in Xorg.conf; I seem to recall there being one a while back, but much seems to be changing there.
That's it guys. I have successfully installed the proprietary ati drivers in past 6.34 and 6.35 kernels but not in latest .6.36. I'm wondering if this have something to do with compatibility or not.
Installation log shows me some errors I can't recognize:
I'm running Debian Squeeze/current fine with the default kernel & ATi's Catalyset drivers. I'm struggling to get the display drivers to work with the bigmem kernel as I've got 4GB ram on my machine so might as well try to enable it.
I can have my system work with the normal Squeeze kernel by installing the normal kernel headers & then FGLRX drivers, but after additionally installing the bigmem kernel & headers (linux-image-2.6-686-bigmem & linux-headers-2.6-686-bigmem) I cannot get the system to reach X after removing & then re-installing the video drivers.
I recently installed Debian Squeeze on Acer Aspire 5542 , it has a Ati Radeon HD 4200 graphics card
I want to install the fglrx drivers , I apt-get install fglrx-driver, fglrx-glx & fglrx-control , The packages & dependencies download fine but when apt tries to install them the fglrx-modules-dkms fails .
I need a quick answer if possible, is it better to remove the proprietary drivers before upgrading to 10.04 from 9.10? Or should i have the open source drivers installed? A clean install is not an option on this machine.
For quite a long time now, I haven't even needed to re-install video drivers most of the time. However, ever since version 2.6.36-0.dmz.4, they haven't been. I booted my system after installing that kernel, re-installed the video drivers, and when that didn't work, completely removed them and re-installed them, and it still didn't work. Well, I was told that the installation was successful but even after restarting it appeared that they weren't working. I installed 2.6.36-0.dmz.5 today and the same problem persists. I tried an older kernel version (2.6.36-4 something) and they worked fine.
my sound was working fine until i've updated the kernel this morning through update manager. Now my sound doesn't not work, despite the sound card appears to be normal on sound preferences.
OS Environment : Debian Squeeze, Gnome, Compiz, kernel 2.6.32-5 Hardwares : Pentium4, ATI Radeon 9600 AGP8x
After upgrading the kernel and restarted, I've been having an issue with the screen. After logged in through GDM, the screen starts distorting, creating small colorful object and blurry
Screenshots :
However, this problem does not exist on tty other than used by desktop ( tty1...tty6 is not affected ) And not in GDM too!!! My GDM shows up nicely, I let it there for hours and no distortion, no strange colors whatsoever.
KMS is enabled ( by default ) as I checked : $ dmesg | grep drm [ 5.373278] [drm] Initialized drm 1.1.0 20060810 [ 5.782595] [drm] radeon kernel modesetting enabled.
I'm using Ubuntu 11.04 and using the fglrx driver from repo, but i can't get 1366x768 resolution. I generate xorg.conf with "sudo X -configure" and put in the Modeline that was copied from windows powerstrip, which works fine under windows with catalyst. and restart X, the lcd gets 1366x768 resolution as expected. but the "sudo X -configure" generated xorg.conf was using "radeon" driver, but blender won't work with it, etc... I want to use "fglrx" driver. So I change the Driver section from "radeon" to "fglrx" and restart X, it wont start now, telling me that out of range or something.
I'm running 9.10 x64 version on an Athlon II x4 with 4 gigs of ram and an ATI Radeon HD 4770 card, using the fglrx driver. I'm also using Compiz.
However, I'm having a pretty major problem with video playback. Some time after starting playback, the entire system appears to freeze up. At least the video does, anyway. The audio continues to play, but the mouse is locked in place and the video frame doesn't move. I tried alt-prscr-k, but couldn't kill X. I tried ctrl-alt-f1 and f2 but again, no change. Ctrl-alt-delete had no response either. In the end, I've been having to use alt-prscr-REISUB to restart the machine.
This problem happens at unpredictable times. The other night, I watched about 1 and a half hours of DVD before it happened, and then after restarting I couldn't watch 10 seconds before freezing again. Just now, again, I started watching a video file, and the system locks up a few seconds in to the video, every time (and a different place every time).
I tried both the ati and radeonhd drivers as well, but I couldn't get the results I wanted with my 2-monitor display. I've only been able to get my monitors the way I want them using fglrx. But without being able to watch video, it's pointless anyway.
I'm lost for what to do... I've spend the last 24 hours installing and uninstalling and reinstalling the different ATI drivers over and over, only to come back to this problem. Is there something I'm missing completely?
I just installed Ubuntu 10.04 64-bit version and everything worked fine so far except for the fglrx driver as it seems. I wasn't able to enable desktop effects and couldn't start games like openarena or nexuiz.
Therefore, I installed the fglrx driver from ATI's site and got everything working fine. Unfortunately it introduced a problem with vlc and the window manager in general. If I go into fullscreen in vlc it takes at least 2 seconds until the screen reacts. Also, if I tab through windows there is at least a second delay which is all very very annoying. I removed the driver again and re-installed fglrx from the repos. I now have two entries for the Catalyst Control Center (normal + administrative) under System->Prefrences which is annoying but not the reason for this thread.
The main problem remains the delay with window tabbing (with desktop effects disabled) and vlc going into fullscreen (this also applies for ..... videos which also lag in fullscreen mode).
The card is a Radeon HD 4830, processor is an AMD Phenom II X4 810.
I was having issues with xscreensaver, desktop background and VLC all cutting out at same or different times and narrowed it down to "possibly" compiz or the FGLXR ATI driver that was recommended for my ATI HD3200 card. So, without knowing better, i went into hardware settings and removed the proprietary driver and did a reboot thinking the system would come back up and default back to a vanilla driver. No dice. Hello white screen of death! So, i am assuming that I can just reinstall via terminal and life will be good again? So, looking for CLI commands via terminal for reinstall.. (if possible)
