Ubuntu :: Fglrx 8.780 - Kernel 2.6.35-25 ?
Jan 29, 2011
I have a HP Pavillion dv5 laptop with an ATI Mobility Radeon 4200 series. It always worked fine with Ubuntu for as long as I can remember. However, at one point, something happened and truly made a majestic mess of things. It might've been extra repos I enabled with Ubuntu Tweak - I do not know. But something made it so that my system would not boot any longer.
And when I say "won't boot", this is what I mean:
- Durning a normal bootup, any entries (except Windows) selected with GRUB (or BURG, not even sure which one I'm using anymore) will spawn the Ubuntu loading screen.
- then try to start X (or GDM) 5 times. The screen goes to dark, black and back to the Ubuntu loading screen. Then it just stays there until I spawn another TTY.
I have no idea what is happening or why. There are no errors in my logs, and I'm truly at a loss here.
I've linked three files: Xorg.0.log, the output of dmesg and the GDM log:
View 1 Replies
ADVERTISEMENT
Jul 24, 2010
A kernel update just killed my ATI graphics driver.
Trying to install proprietary graphics driver fails and points at /var/log/jockey.log
This ends with
Code:
If I can't sort this out I'll have to try rebooting into the old kernel to get the graphics driver back. The dreadfully slow scrolling in the browser is starting.
View 5 Replies
View Related
Nov 25, 2010
Posting from my Windows 7 system. Once again an Ubuntu kernel update has broken X. Once again I cannot get into Grub2, despite putting in the hacks to lengthen the time it listens. I don't need instructions on how to fix it from Live CD. I'm going to try Gentoo or something, anything, different. I need a Linux distro that can survive regular updates and boot to desktop reliably.
View 1 Replies
View Related
Feb 25, 2011
I'm using Ubuntu 10.04 LTS. I'd like to use the latest kernel from repositories (at the present moment it's 2.6.35-23), that's why I've installed backports.
These are packages:linux-image-generic-lts-backport-maverick linux-headers-generic-lts-backport-maverick
But DKMS failed to build modules for fglrx: I think it's caused by old version of fglrx.
View 5 Replies
View Related
Feb 17, 2011
Every time the update-manager decides to upgrade the kernel my graphics driver is ****** up. I have had this problem in 10.04 and now in 10.10. Now I get dropped to the command prompt after an upgrade (I can also log in with fail-safe/low graphics mode). The problem is solved if I reinstall the package fglrx so nog big issue but it is rather annoying. What could be wrong? I am using ATI HD4770. I haven't tried open drivers yet.
View 7 Replies
View Related
Apr 30, 2011
Excerpt of Xorg.0.log output:
[Code]....
September 20 2010? Is there a newer kernel module for fglrx? How can I get and install it?
View 9 Replies
View Related
Jan 7, 2010
I have an HP tx2500 tablet pc running 9.04, which I was trying to configure the tablet for using the .fdi method on this page. After I redid the .fdi file, I rebooted, and it gave me a flashing screen, similar to the one i got when I tried to install 9.10.
I tried going into recovery mode and using xfix: bad idea. Then, I tried installing envy and reinstalling the drivers from there. That failed as well.
So now, when I try to manually remove the ati packages,(from command line in recovery mode) it doesn't let me, because of some problem with "fglrx-kernel-source" I can't configure, remove, or purge.
View 1 Replies
View Related
Jun 30, 2010
I have an ATI radeon HD 3400 series video card, and the open-source drivers make my computer run really hot. I tried installing FGLRX by using "Check For New Hardware Drivers", but it did not work, so I installed the ATI catalyst 10.5 package from AMD's website, and am using Xserver-xorg-core-1.7.6-2ubuntu7+backclear1 from k0ekk0ek's PPA so there is no lag when minimizing windows and such.
Everything was perfect until the 2.6.32-23 kernel update came along. I let it update, and rebooted, but the ATI driver no longer starts, even when I uninstall and reinstall it.
I am just using the 2.6.32-22 kernel for now, as the 2.6.32-23 kernel still runs hot without the ATI driver enabled. I would like to start using the new kernel at some point...
View 4 Replies
View Related
May 26, 2010
I am currently having an issue installing the FGLRX driver in slackware 13.1. I use a customer kernel due to buggy acpi on my toshiba laptop. The steps i took to compile my kernel are as followed. hu
make mrproper in /usr/src/linux directory
patch /usr/src/linux directory
copy kernel config from /boot directory
make menguconfig and load config
the make all
make modules install
i have also tried make install as well
then i mopy system.map the kernel file and config file into /boot directory
edit lilo
reboot ... everything works fine acpi works properly like before.. now the problem comes.. I try to install the fglrx drivers and i get the error message
Code:
Error:
kernel includes at /lib/modules/2.6.33.4-smp/build/include do not match current kernel.
they are versioned as ""
instead of "2.6.33.4-smp".
you might need to adjust your symlinks:
- /usr/include
- /usr/src/linux
ERROR: I don't have make module
Am I doing something wrong setting up my kernel. Issue on my gentoo box I have.
View 6 Replies
View Related
Oct 1, 2010
I've been reading about a temporary solution to the kernel/Fglrx issue caused by the last kernel update, but I haven't read about any permanent solution to this issue. Anyone know anything about a permanent solution (new kernel update?, new Fglrx driver?) to this compilation error?
View 6 Replies
View Related
Oct 29, 2010
I have an HP laptop running 11.3/KDE4.5.2, has integrated HD3200 ati graphics.
Yesterday, ATI version 10.10 fglrx driver was installed on the system, kernel was 2.6.34.7-0.4-desktop. I use the "build rpm" option with the downloads from ATI. All seemed running well.
I had installed the automatic recompile script posted by please_try_again after moving to 2.6.34.7-04, so today's new 2.6.34.7-0.5-desktop update was a chance to see it in action.
After the update and reboot, the X server restarted so I have to assume the automatic recompile script ran, although I did not see any messaging (place to look?).
However, some things did not seem "quite right". fgl_glxgears ran, but seemed slow (only 70 or so fps) pm-suspend failed to sleep the machine, I see the error message "s2ram_do: Device or resource busy" in /var/log/pm-suspend.log, which I think (?) is fglrx related but not sure why I think that. I moved to a root terminal, init 3, removed the fglrx rpm with yast, deleted the fglrx rpm and rebuilt a new one with ati....run. I then installed the new rpm (with yast), ran aticonfig --initial, then rebooted.
Basically, I am at the same level as above, fglrx installed and running, but slow and pm-suspend still not working.
So now I wonder if there is a new problem with the -5 kernel update, something like the excitement a couple weeks back when we had to patch the driver (or the kernel symbols) just to get a compile.
Can i assume someone has been able to cleanly update to 2.6.34.7-0.5 and get their fglrx running again?
An observation, which may or may not be related to my issues. The fglrx rpm installs a new /usr/lib64/dri/fglrx_dri.so, but in reviewing the log file /var/log/Xorg.0.log, it never appears to load. Two other *dri*.so modules do load. There is no "dri" section in Xorg.conf; I seem to recall there being one a while back, but much seems to be changing there.
View 5 Replies
View Related
Nov 7, 2010
That's it guys. I have successfully installed the proprietary ati drivers in past 6.34 and 6.35 kernels but not in latest .6.36. I'm wondering if this have something to do with compatibility or not.
Installation log shows me some errors I can't recognize:
Code:
View 9 Replies
View Related
Jan 14, 2011
I'm running Debian Squeeze/current fine with the default kernel & ATi's Catalyset drivers. I'm struggling to get the display drivers to work with the bigmem kernel as I've got 4GB ram on my machine so might as well try to enable it.
I can have my system work with the normal Squeeze kernel by installing the normal kernel headers & then FGLRX drivers, but after additionally installing the bigmem kernel & headers (linux-image-2.6-686-bigmem & linux-headers-2.6-686-bigmem) I cannot get the system to reach X after removing & then re-installing the video drivers.
View 9 Replies
View Related
Nov 11, 2010
I recently installed Debian Squeeze on Acer Aspire 5542 , it has a Ati Radeon HD 4200 graphics card
I want to install the fglrx drivers , I apt-get install fglrx-driver, fglrx-glx & fglrx-control , The packages & dependencies download fine but when apt tries to install them the fglrx-modules-dkms fails .
The Kernel is 2.6.35.
View 2 Replies
View Related
Nov 5, 2010
For quite a long time now, I haven't even needed to re-install video drivers most of the time. However, ever since version 2.6.36-0.dmz.4, they haven't been. I booted my system after installing that kernel, re-installed the video drivers, and when that didn't work, completely removed them and re-installed them, and it still didn't work. Well, I was told that the installation was successful but even after restarting it appeared that they weren't working. I installed 2.6.36-0.dmz.5 today and the same problem persists. I tried an older kernel version (2.6.36-4 something) and they worked fine.
View 2 Replies
View Related
Oct 15, 2010
I'm trying to figure out a bug with fglrx. Whenever I go to log a machine out, sometimes the screen will go black and never come out of it. Upon reviewing the system logs for XServer, I find the following:
(II) Keyboard2: Close
(II) UnloadModule: "evdev"
(II) Mouse2: Close
(II) UnloadModule: "evdev"
[Code].....
For some reason, going back to the login screen will sometimes cause fglrx(0) to freak out and interrupt the logout process. how to force it to stop doing this or fix this issue? I'm using the ATI proprietary drivers with the latest version.
View 3 Replies
View Related
Nov 20, 2010
I traveled across the lands, searching far and wide.I found nothing that would fix my problem. Tried all the guides, copy/pasted so much script, but nothing works. This thing is like a damn virus, seriously.
View 2 Replies
View Related
May 23, 2010
I just installed Kubuntu 10.04 and I am experiencing problems with the fglrx diplay driver.I installed it with Jocky and rebooted.Everything works fine. But everything is so un-smooth. Like dragging & resizing windows.It's not updating instantly.It was smooth before installing fglrx but then I couldn't boot without nomodeset.I am using a widescreen LCD monitor.My xorg.conf
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
[code]....
View 2 Replies
View Related
Jun 7, 2010
I recently reinstalled using the latest "respin" CD ISO. Before that, I had other problems with 10.04, but X and fglrx worked perfectly.
Now, X always comes up in 1600x1200 instead of the monitor native 1920x1200. I am still using the same on-board Radeon 4200. Supposedly this display adapter is very well supported by Linux???
I did an aticonfig --initial as suggested in the Known Lucid Lynx issues/bugs with workarounds thread, but when I restarted X I got a black screen, and when I rebooted, even though xorg.conf now says
Code:
Option "PreferredMode" "1920x1200"
The system still comes up in 1600x1200. Note it is on DVI and I never touched the hardware or put a bad cable on it since it was working with the first install of 10.04.
When I go into Catalyst Control Center, Display Manager, Display Properties tab, the highest resolution available is 1600x1200. I hand-edited X11 and restarted and ran for a while in 1920x1200, but that no longer works. Now I just get a black screen whenever I restart X, and it always starts in 1600x1200.
How do I convince fglrx that I really have a 1920x1200 monitor? (VP2330wb). It is really very blurry in 1600x1200.
EDIT: Ran get-edid, got:
Code:
get-edid: get-edid version 2.0.0
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
[Code]....
View 8 Replies
View Related
Sep 3, 2010
I turned off my machine and when I turned it back on it would only boot in low res mode.I cannot 'activate' the driver, gives me an error. Tried following options in 10 different threads here,10.04, was working fine for a month or more since upgrading. ATI 5770 card, driver is latest.
View 5 Replies
View Related
Apr 3, 2011
I'm not 100% certain, but I'm fairly sure that fglrx is preventing clean shut downsHardware is an ASUS E-35M1-I Deluxe, so fairly new, and I'm running Ubuntu natty.I couldn't find anything damning in the logs under /var/log, so I'm not sure where I can look to find the specific errors. All I know is that when I'm running with fglrx shutdown takes forever, as if it's waiting for the X server, and it just never shuts down cleanly, but when I run with the standard radeon driver everything shuts down quickly and cleanly.Sometimes when I tried to execute a "service slim stop" or "service gdm stop", the whole system would hang, and needed a hard reset.
View 7 Replies
View Related
Apr 24, 2011
So a few weeks ago, I was running Ubuntu/Windows7 Dual Boot, and I installed the proprietary FGLRX ATI graphics card driver. This rendered my Ubuntu system command-line only, and I had to install all over again. If I install FGLRX now, will this happen again or has the bug been fixed? If it does happen again, is there any way to revert to the open-source ATI driver from the command line?
View 9 Replies
View Related
Apr 29, 2011
Looking at other threads i'm not the only one with this problem. after installing the proprietary driver, graphics are slow & 3D appears not to be working. fglrxinfo gives this:
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 2400 PRO
OpenGL version string: 3.3.10666 Compatibility Profile Context
No mention of "glx" or "direct rendering" as in previous versions. sudo aticonfig --initial -f gives this: Uninitialised file found, configuring. Fail to link to fglrx-libglx.so, please check whether driver is installed correctly Using /etc/X11/xorg.conf Saving back-up to /etc/X11/xorg.conf.fglrx Apparently driver not installed correctly. Also there's no fglrx-modialases (or something) in synaptic thats been needed before.
View 9 Replies
View Related
May 7, 2011
I'm using Ubuntu 11.04 and using the fglrx driver from repo, but i can't get 1366x768 resolution. I generate xorg.conf with "sudo X -configure" and put in the Modeline that was copied from windows powerstrip, which works fine under windows with catalyst. and restart X, the lcd gets 1366x768 resolution as expected. but the "sudo X -configure" generated xorg.conf was using "radeon" driver, but blender won't work with it, etc... I want to use "fglrx" driver. So I change the Driver section from "radeon" to "fglrx" and restart X, it wont start now, telling me that out of range or something.
Section "Device"
Identifier "Card0"
Driver "radeon"
BusID "PCI:1:5:0"
EndSection
View 4 Replies
View Related
May 8, 2011
In an attempt to correctly play Half-Life 2 in Wine, I installed the AMD driver downloaded from their site.
Code:
sudo sh ati-driver-installer-11-4-x86.x86_64.run
Reboot. Now, with both FireGL and this running a conflict is created. Naturally the system boots into command prompt. So:
[code]...
Reboot. Got OpenGL, but performance is choppy. Glxgears is very choppy.So how to revert to the old fglrx? There is an uninstall script at /usr/share/ati. Shall I run that or shall I reinstall all of the above removed packages beforehand?
View 5 Replies
View Related
Jan 5, 2010
I'm running 9.10 x64 version on an Athlon II x4 with 4 gigs of ram and an ATI Radeon HD 4770 card, using the fglrx driver. I'm also using Compiz.
However, I'm having a pretty major problem with video playback. Some time after starting playback, the entire system appears to freeze up. At least the video does, anyway. The audio continues to play, but the mouse is locked in place and the video frame doesn't move. I tried alt-prscr-k, but couldn't kill X. I tried ctrl-alt-f1 and f2 but again, no change. Ctrl-alt-delete had no response either. In the end, I've been having to use alt-prscr-REISUB to restart the machine.
This problem happens at unpredictable times. The other night, I watched about 1 and a half hours of DVD before it happened, and then after restarting I couldn't watch 10 seconds before freezing again. Just now, again, I started watching a video file, and the system locks up a few seconds in to the video, every time (and a different place every time).
I tried both the ati and radeonhd drivers as well, but I couldn't get the results I wanted with my 2-monitor display. I've only been able to get my monitors the way I want them using fglrx. But without being able to watch video, it's pointless anyway.
I'm lost for what to do... I've spend the last 24 hours installing and uninstalling and reinstalling the different ATI drivers over and over, only to come back to this problem. Is there something I'm missing completely?
View 6 Replies
View Related
May 28, 2010
I just installed Ubuntu 10.04 64-bit version and everything worked fine so far except for the fglrx driver as it seems. I wasn't able to enable desktop effects and couldn't start games like openarena or nexuiz.
Therefore, I installed the fglrx driver from ATI's site and got everything working fine. Unfortunately it introduced a problem with vlc and the window manager in general. If I go into fullscreen in vlc it takes at least 2 seconds until the screen reacts. Also, if I tab through windows there is at least a second delay which is all very very annoying. I removed the driver again and re-installed fglrx from the repos. I now have two entries for the Catalyst Control Center (normal + administrative) under System->Prefrences which is annoying but not the reason for this thread.
The main problem remains the delay with window tabbing (with desktop effects disabled) and vlc going into fullscreen (this also applies for ..... videos which also lag in fullscreen mode).
The card is a Radeon HD 4830, processor is an AMD Phenom II X4 810.
View 1 Replies
View Related
Jun 3, 2010
Trying to update ATI drivers to Catalyst 10.5The very first step to uninstall the previous driver version does not work.
andrew@andrew-desktop:~$ cd /usr/share/ati/
andrew@andrew-desktop:/usr/share/ati$ sudo sh ./fglrx-uninstall.sh
[sudo] password for andrew:
[code]....
View 9 Replies
View Related
Jun 27, 2010
A few weeks ago either after the upgrade to 10.04 or on a subsequent system update I have been having problems. I have not been able to use Compiz Desktop Effects and playing videos in full screen is awful slow and choppy. I have tried numerous things to try and fix this and now at this point whenever i try anything through the terminal I get the following error.code...
View 5 Replies
View Related
Jun 27, 2010
I need support for adjusting over/underscan for my Mitsibushi WD-Y577 57" DLP HDTV (a breed between WD-57733 and WD-57734), because the open source ATI Radeon driver does not include it. When I attempt to install fglrx, here's what I'm getting:
apt-get install fglrx
Code:
Loading new fglrx-8.723.1 DKMS files...
First Installation: checking all kernels...
Building only for 2.6.33.5-rt23
[code]....
I have compiled 2.6.33.5 from source and patched it with 2.6.33.5-rt23. I have adjusted features take a lot of things off that I don't need. I need the real-time kernel for music creation using JACK (Jack Audio Control Kit).
Adjusting over/underscan requires an AMD Catalyst Control Center. Will there be future open-source ATI drivers that allow me to correct my display without having to change modelines in xorg? It will take a lot of trial and error to figure this out for my display. Note that even if I did install the kernel headers for 2.6.32-23-preempt or 2.6.33-23-realtime (depending on what I use), fglrx module will still fail to install, even if I install linux-source. I'm confused. I do want fglrx and I do need the real-time/low-latency kernel for music creation under Ubuntu 10.04.
Update: if you create a utsrelease.h header file inside /usr/include/linux directory, you can write out like this:
Code:
#define UTS_RELEASE "2.6.33.5-rc3" # replace the version number for your running kernel. You can then reinstall fglrx, but then I get this:
Code:
DKMS make.log for fglrx-8.723.1 for kernel 2.6.33.5-rt23 (x86_64)
Sun Jun 27 19:45:11 EDT 2010
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
[code]....
View 6 Replies
View Related
